Used Stairs for sale (217)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning height: 1,500 mm, turning diameter: 2,000 mm, faceplate diameter: 1,500 mm, Toshiba TMD-20 APC CNC turning center - Year of manufacture: 1999 - Control system: Fanuc Series 15-T Technical data - Maximum turning diameter: Ø 2,000 mm - Maximum workpiece length: 1,500 mm Lsdpfxj Aax N Se Akqsru - Maximum workpiece weight: 5,000 kg Machine equipment / accessories - 2-pallet system - Renishaw measuring probe for workpiece measurement - Tool measuring probe - Powered tools - High-pressure coolant pump - Chip conveyor - Basic chuck for holding soft jaws - Access platforms and stairs - Steel grid safety fence around the pallet station - Machine manuals and technical documentation - Maintenance records can be provided

Condition: good (used), Year of construction: 2014, Stairs / Staircase with intermediate landing – used: Price: €2,500 (net), disassembled, packed, and loaded at the location! Item 1 Manufacturer: Stow Type: unknown Year of manufacture: 2014 Ground floor to landing: approx. 14 steps (the 14th step is at the level of the landing) Landing to upper floor: 11 steps (the 11th step is at the level of the upper floor) Distance between steps: approx. 18.5 cm Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg Lodpfxezqz T Dj Akqjru

Condition: used, Year of construction: 1988, Technical data: - Strip thickness: 0,6 – 4,0 mm - Strip width: 600 –1550 mm - Coil I.D.: 508 –610 mm - Coil weight (max.): 25 ton - Coil O.D.: 2000 mm - Side trim: 3-9 mm - Working Speed: 100 – 200 m/min - Cutting shaft diameter: 180 mm - Knive OD: 300 mm - Max. Number of cuts with thickness 0.9mm: 25 Cuts - Max. Number of cuts with thickness 4mm: 3 Cuts - Average production previous owner: 10 coils/shift (8 h) Scope of supply: - 25Tn loading car with 2 loading positions - 25Tn Single mandrel uncoiler with - Supporting arm unit - Snumbber roll - Coil opener - Entry straightener with hydraulic Shear - Intermediate guiding table with vertical centering rolls - Circular shear: - With 180mm shaft diameter - Quick-change system with 2nd shaft on-line - Loop table with hydraulic cover - Strip guiding axe with spacer - Pneumatic felt-press brake - 25Tn Single mandrel recoiler Ledsz Tylvepfx Akqjru - 25Tn exit unloading car - 25Tn coil 1 arm turnstile - Scrap recoiler - Electrical cabinets & operator panels - Hydraulic group - Safety barriers and photoelectric barriers - Stairs, passages, and accessories - Documentation and manuals - Complete set of tooling (quantities to be confirmed) * Strip thickness: 0,6 – 4,0 mm * Strip width: 600 –1550 mm * Coil O.D.: 2000 mm * Coil I.D.: 508 –610 mm * Coil weight (max.): 25 ton * Working Speed: 100 – 200 m/min * Cutting shaft diameter: 180 mm * Knive OD: 300 mm

Condition: good (used), Year of construction: 1996, functionality: fully functional, Gravity belt filter Lrjdpfx Akez R Airjqsu Constructed in stainless steel and intended for the filtration of demineralised water. It has an approximate nominal filtration area of 7.5 m2, formed by a continuous metal belt approximately 1500 mm wide. Declared flow rate: 105 m3 per hour. Tank capacity: 10000 litres. Maximum operating temperature: 65 degrees Celsius. Nominal filling level: 80 percent. The SG Becken type tank has an empty weight of 1300 kg and has been pressure tested at 0.5 bar. Includes filter conveyor belt, compartmentalised tank, feed and discharge system, geared motor for belt movement, piping, valves, flanged connections, sensors and access structure with platforms and stairs.

Condition: good (used), Year of construction: 2014, Various staircases – used: Price per step: €95.00 (net), disassembled, packed, and loaded at the storage location! Pos 2+3: Wide, with 6 steps Pos 4: Wide, with 6 steps Pos 7: Narrow, with 13 steps and a “door” Pos 9+10: Wide, with 14 steps Pos 11: Wide, with 15 steps Pos 13: Wide, with 13 steps Pos 13a: Wide, with approximately 7 steps Ledpfxjzqz Sae Akqjru Manufacturer: Stow Type: unknown Year of manufacture: 2014 Steps: Galvanized grid grating Stringers and handrails painted Condition: good Available: approximately Q4/2026 Location: Hamburg

Year of construction: 2016, condition: used, A mass finishing system with dosing equipment is offered. Operator panel on the control cabinet. Equipped with dosing unit, control cabinet, safety enclosure, stairs and conveyor chute. Inspection possible by prior arrangement. Lodoz Hlxaopfx Akqsru

Condition: used, Year of construction: 2012, axis stroke (X,Y,Z) 5.910,1.815,655 mm Number of spindle head vertical 14 St. Number of spindles head horizontal 4 St. main drive 12 kW tool taper HSK F63 Number of axles 5 St. Number of tools 20 St. working area 5005 x 1450 x 200 mm Number of working hours 3108 h Masterwood Project 455 L, 5-axis CNC machining center ----- Machine can be viewed while still in operation! Sold ex-site. Dismantling and reinstallation by experienced Masterwood technicians available as an option! The Masterwood Project 455 L is a highly flexible, numerically controlled 5-axis machining center featuring a robust gantry design. It has been specifically developed for the sophisticated, complete processing (drilling, milling, grooving) of solid wood, panel materials, windows, doors, and stairs. Thanks to its extended "L" configuration, the machine offers an exceptionally large working area for extra-long components. Summary of technical specifications: ----- Travel ranges: X = 5,910 mm, Y = 1,815 mm, Z = 655 mm Max. workpiece dimensions: length 5,005 mm, depth 1,450 mm, height 200 mm Max. axis speed: X = 80 m/min | Y = 80 m/min | Z = 25 m/min Work table system: "TUBELESS" (hose-free) work table with vacuum clamping system Number of table beams: 8 table beams (L-version) Positioning aids: 4 workpiece lifting devices (for heavy components) Stops: 8 rear stops, 8 intermediate stops, 1 side stop on each side (right/left) Vacuum pump Main spindle: ----- Milling spindle (main spindle): 12 kW, 5-axis spindle Spindle cooling system: Liquid circulation cooling (for maximum continuous load) Tool holder: HSK-F63 C-axis (rotation): Indexable by ± 360° Fixed drilling head: ----- Total spindles: 19 independent drilling spindles. • Vertical spindles: 7 in the X-direction, 7 in the Y-direction. • Horizontal spindles: 2 double spindles in the X-direction, 1 double spindle in the Y-direction. • Spindle spacing: 32 mm standard grid. • Integrated grooving saw: Saw unit in the X-direction, saw blade Ø 125 mm (4,000 rpm). Tool changing system ----- Carousel magazine: 16-position tool changer Additional positions: Linear tool changer with 4 positions on the machine bed for large-format tools (e.g., profile cutters or saw blades up to Ø 350 mm). Control System & Software ----- Hardware: High-performance PC-based control system with a Windows interface and a 17" color TFT monitor. Network: Integrated Ethernet card for easy online connectivity. Software Package: • MasterWork: Graphical programming system (CAD/CAM interface, DXF import, macros). Lredpfx Aoz Hz Iwjkqju • Master AT: Graphical setup aid for the optimal positioning of vacuum pods and support beams. Remote Maintenance: Equipped for "Teleservice On-Line" for direct online troubleshooting. Accessories: ----- Various vacuum clamping devices 4 solid wood clamps Veneer stops Selected tools as shown (available upon request) ----- Price for the above-mentioned machine available upon request! ----- Further Information:...

Condition: used, Year of construction: 2003, Overview This Krones preform feeding system stores preforms in bulk and delivers them, oriented, to the infeed of a stretch blow moulding machine. It was in production until March 2026, feeding a Krones Contiform S24 blow moulder. The preforms are tipped into the buffer silo, carried up by the inclined preform elevator and aligned on the roller sorter, which hands them over in a continuous row to the blow moulder's infeed rail. The access platform gives the operator safe access to the roller sorter. Lrjdpfx Akjz Sr Imoqju Technical data - Manufacturer: Krones - Machine type: preform feeding system for a stretch blow moulding machine - Operated with: Krones Contiform S24 blow moulder - In production until: March 2026 Scope of Delivery - Preform buffer silo | Krones | stainless steel hopper with access stairs - Preform elevator | Krones | inclined elevator from the silo to the roller sorter - Roller sorter | Krones | orients the preforms and feeds them into the blow moulding machine - Access platform | Krones | steel platform with stairs and railings Condition Used, dismantled and stored. The preform tipper and the electrical control cabinet are not included; the preform tipper visible in one photo is not part of the offer. Availability Available immediately. Location: Germany. Viewing is possible.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 300 mm, travel distance Z-axis: 900 mm, total height: 5,800 mm, total width: 5,500 mm, overall weight: 26,000 kg, controller manufacturer: FANUC, controller model: 0i-TC, product length (max.): 7,200 mm, number of axes: 2, Vertical turning machine manufactured in 2009. This SMTCL QTC 20090 features a maximum turning diameter of 2,000 mm and a turning height of 1,600 mm. It includes a manual 4-jaw chuck with a diameter of 1,600 mm and a 12-position tool changer magazine. If you are looking to get high-quality turning capabilities, consider the SMTCL QTC 20090 machine we have for sale. Contact us for further details regarding this machine. • CNC control: FANUC 0i-TC with 10.4" screen • Mobile vertical crossbar with 5 indexing positions • CE safety equipment • Manual 4-jaw chuck diameter: 1,600 mm • Maximum turning diameter: 2,000 mm • Maximum turning height: 1,600 mm • Chuck speed: 1–254 rpm (2 ranges) • Motor power: 55 kW (30-minute rating) • RAM cross-section: 220 × 220 mm • 12-position tool changer magazine • Electrical supply: 380 V ±10% Additional equipment Lodpfx Akjz Sy Tkjqjru • Direct measurement system: HEIDENHAIN • RENISHAW tool presetting system • Turning tool holder • Chip extractor • Work light • Access cover and stairs Technical Specification Driven Tools No

Condition: used, Year of construction: 2005, machine/vehicle number: LC671, Used Tetra Pak A3 flex 100V 330 prismaTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak aseptic carton filling and packaging solution configured for 330 ml Prisma cartons. The central filling machine is a Tetra Pak A3 FLEX 100V, built in 2005, designed for Brik carton handling with a pull-tab configuration. The line also includes a new Tetra Pak Cap 30 FLEX cap applicator, built in 2026, configured for 330 ml Prisma cartons with Dream Cap closures.Filling machine: Tetra Pak A3 FLEX 100VFiller year: 2005Carton format: 330 ml PrismaCarton type: Brik cartonClosure configurations: pull tab and Dream CapCap applicator: Tetra Pak Cap 30 FLEX, built in 2026OPTIONAL: Accumulator ACHX30 - 2010, 14713H Advanced Automation & Control SystemsThe equipment features an integrated operator HMI/control panel, electrical control cabinet, pneumatic service components, mechanical drives and adjustable machine mechanisms. The filling and cap-application stations are intended to operate as coordinated industrial packaging equipment, supporting controlled handling of carton material, carton formation, filling, closing and downstream transfer. Operator access areas include service platforms, stairs and access panels for operation and maintenance activities.Production Line Integration CapabilitiesThis complete aseptic carton line is arranged around the filling machine and cap application process for 330 ml Prisma Brik cartons. It can be integrated with product preparation, upstream aseptic processing and downstream industrial packaging machinery according to the intended beverage production layout. An optional accumulator is available to provide carton buffering between line sections and help maintain production continuity during downstream interruptions.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 FLEX 100V2005Capping MachineTetra Pak Cap 30 FLEX2026Accumulation SystemACHX302010Machine Condition & Maintenance HistoryThe line includes a used Tetra Pak A3 FLEX 100V filler built in 2005 and a new Tetra Pak Cap 30 FLEX cap applicator built in 2026. The optional used ACHX30 accumulator was built in 2010 and records 14,713.8 running hours. The stainless-steel enclosure, service platform, access ladder, pneumatic tubing, conveyor or product-transfer sections and machine adjustment components are visible on the equipment.Operational Performance & VersatilityThe Tetra Pak aseptic carton filling s... Lodpfxezw Dvne Akqsru

Condition: used, Year of construction: 1994, functionality: fully functional, Gravity belt filter Lrodjz R Amqjpfx Akqsu Stainless steel construction. Designed for the separation of solids from process water, oils and emulsions using nonwoven filter media. Includes a compartmentalised main tank, metal support belts, discharge rollers, geared motors, 3 centrifugal pump units, stainless steel manifolds and piping, valves, pressure gauges, level controls, electrical control panel, platforms, stairs and handrails.

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Price: €2,000 (net), disassembled, packed, and loaded at the location! Item No. 4 Manufacturer: Stow Ljdpjzqz Syjfx Akqoru Type: unknown Year of manufacture: 2014 Approximately 10 steps from the ground floor to the landing Further data will be determined Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrails painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, large staircase with 2 intermediate levels – used: Price: €4,000 (net), disassembled, packaged, and loaded at the location! Item No. 14 Manufacturer: Stow Type: unknown Year of construction: 2014 Distance between steps will be provided later. Width of the staircase will be provided later. Dimensions of the landings will be provided later. Ground floor to landing 1: Number of steps will be provided later. Landing 1 to landing 2: approx. 14 steps Landing 2 to upper floor 2: With 2 intermediate levels Steps: galvanized grating Stringers and handrails painted Condition: good Available: from approx. end of Q4/2026 Location: Hamburg Ljdpozqz I Usfx Akqjru

Condition: good (used), Year of construction: 2021, functionality: unexamined, working width: 400 mm, height adjustment type: electric, Roller application machine Manufacturer: Cosma Type: 400 RC Year of manufacture: 2021 2-roller application machine for applying oil With the Cosma roller application system, oils are applied to, among other things, solid wood floors (parquet), paneling, stairs, garden material, scaffolding wood, and wall decorations. Working width: 400 mm Suitable for workpieces: Thickness: 10 - 50 mm Working height: 900 mm Equipped with: - Dosing roller, 0.37 kW - Rubber-coated application roller, 0.37 kW, 25 Shore With electric height adjustment and mechanical height display Lredpfx Akszzdivoqju Control panel for: Feed speed, amperes per roller, and roller height adjustment

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Price: €2,500.00 (net), dismantled, packaged, and loaded at the location! Item No. 12 Manufacturer: Stow Lodezqz Smjpfx Akqjru Type: unknown Year of manufacture: 2014 From ground floor to landing: approx. 10 steps (with the 1st step at the level of the landing) From landing to upper floor: 12 steps (with the 12th step at the level of the upper floor) Distance between steps, presumably approx. 18.5 cm (to be confirmed) Width: to be confirmed With intermediate landing Steps: galvanized grating Stringers and handrail painted Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: used, mileage: 366,924 km, power: 132 kW (179.47 HP), first registration: 04/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, loading space length: 5,300 mm, loading space width: 2,040 mm, loading space height: 2,300 mm, Year of construction: 2007, Equipment: ABS, electric window regulation, = Additional options and accessories = - Stairs - Sun visor = Remarks = ZCF75D0302499507 = More information = Front axle: Steering GVW: 7.500 kg Registration number: 1UMS956 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Lsdpfx Asymrcpjkqeru Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), Staircase clamp Ljdpfx Akjln Ulasqjru (28366) Clamping height 200 - 250 mm T-slot width 12 mm Clamping screw M 10 4 pieces available Weight 8.5 kg

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, 2 stories with stairs, 2 large and one small room – used: Price ex works: €19,500 (net), disassembled, packaged, and loaded! Item 1: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, probably 2014 Height: almost 6m Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length: approx. 21.40m, the "gap" for the passage is approx. 4.40m long Depth: approx. 4.24m Ground floor height: approx. 2.86m All offices are closed on three sides and therefore have one side against the hall wall Without flooring Condition: good Lredezqz D Aopfx Akqsu Available: from approximately Q4/2026 Location: Hamburg

Condition: used, loading space width: 2,440 mm, loading space length: 6,060 mm, loading space height: 2,800 mm, Year of manufacture: 2011 Field of application: Freight transport Empty weight: 2.700 kg General condition: poor Technical condition: poor Visual appearance: poor Please contact Christian Theißen for more information Manufacturer: Unknown Model: Sanitary container Year of build: 2011 Condition: Used Price: € 1.250,00 excl. 19% VAT Data: Dimensions LxWxH: 6058x2438x2800 mm inside height: 2500 mm Modular construction: Container steel structure class EXC2 Additional Information: 3 exterior doors (opening outwards), 2 bathroom windows, 2 sinks with mirrors, 2 women's toilet stalls, 1 men's toilet stall, 3 urinals, women's and men's areas separated by an interior wall with a door, red exterior paint (RAL 3000), stackable, transport points according to ISO standard and forklift pockets included. Transport Points in accordance with ISO Standard: in the corners stackable: 3-times Roof: with layer structure Galvanized sheet steel: 0,55 mm Drainage of rainwater: via circumferential gutters in the frame, with downpipes in the corner posts Load-bearing capacity of the roof: 100 kg / m² Walls: Interchangeable panels with layered structure Floor: with layer structure Floor finish: 2 mm grey PVC flooring, welded at the joints and white PVC skirting board Floor load capcity: 200 kg / m² Dimensions: 900x2.000mm Lrsdpfxo Adrm Eo Akqju Windows: white PVC-Windows Electrical installation: Electrical flush-mounted installation (concealed) Powerinstallation: 230V-sockets Lighting (2x16W): Lamps Empty weight: 2700 kg Information: Used, damaged, dents on the exterior walls. Only the container is being sold, WITHOUT stairs and septic tank. Location: 27572 Bremerhaven immediately available

Condition: used, Mobile assembly platform, Workmaster, podium ladder, platform staircase ZARGES type Z-53796 Aluminum ladder, access ladder Year of manufacture: 2016 Platform height: approx. 45 / 73 / 1000 mm Platform size: 1700 x 600 mm - 3 steps + podium - Aluminum construction - Foldable staircase with 200 mm deep steps and non-slip surface - Platform with non-slip surface - Movable on swivel casters, 4 swivel casters with locking mechanism - Lowering device on the stringer as a central brake - Assembly platform foldable, can be disassembled for transport Space required L / W / H: 2600 x 740 x 1940 mm Transport dimensions L / W / H: 2000 x 950 x 670 mm Weight: 54 kg Very good condition, like new Lrjdpfeznrquox Akqsu

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 70,000 W, spindle speed (max.): 14,000 rpm, travel distance X-axis: 450 mm, overall weight: 32,000 kg, controller manufacturer: SIEMENS, controller model: 840D solution line, number of axes: 5, This 5-axis Weingartner Pick Up 400 machining center for screw manufacturing was manufactured in 2023. It features a maximum workpiece length of 4,000 mm and a maximum workpiece diameter for milling of 180 mm. The machine is equipped with a Siemens 840D control system and offers advanced simultaneous machining capabilities. If you are looking to get high-quality screw manufacturing capabilities, consider the Weingartner Pick Up 400 machine we have for sale. Contact us for further details. • Control: Siemens 840D solution line (NCU 720.3), OP19 touchscreen + Siemens TP700 touch panel • Simultaneous machining: 5-axis; B‑axis turning • Workpiece capacity: max length between centers 4,000 mm; max diameter for milling 180 mm; chuck size Ø260 mm • Power supply: 3 × 400 V / 50 Hz; main fuse approx. 200 AAxes • X: travel 450 mm; rapid 20 m/min • Y: travel −80 / +150 mm; rapid 20 m/min • Z: rapid 25 m/min • B: swivel range ±45°; max swivel speed 90°/s; clamping torque 5,000 Nm • C: max speed 50 rpm; max torque 1,740 Nm (cont.) / 2,580 Nm (40% duty) • W (tailstock slide): rapid 15 m/min • VZ1 / VZ2 (steady rest slides): rapid 15 m/minTurning / Milling Unit • Unit: UFE-400; tool spindle: MDFK • Power: 45 kW (continuous) / 70 kW (40% duty) • Max spindle speed: 14,000 rpm; nominal speed: 1,560 rpm • Torque: 275 Nm (continuous) / 430 Nm (40% duty) • Tool interface: HSK 100‑T (compatible HSK 100‑A / HSK 100‑T); additional interface: Capto C8 • Internal coolant: 80 bar; 20 l/minTailstock • Hydraulically operated quill; diameter 190 mm; stroke 200 mm; Morse taper MK6Machine equipment / configuration • Front and rear self-centering steady rests; independently CNC-positionable • 2 prismatic steadies for screw milling • Steady jaw ranges: 15–30 / 30–65 / 65–140 / 140–200 mm • Hydraulic SMW KNCS‑N 260 power chuck with quick jaw change • Central lubrication system • Fully enclosed machine housing with driven safety doors; Visiport inspection windows • Hydraulic and pneumatic systems • Coolant and oil mist extraction preparation • Electronic hand control for B/C/X/Y/Z axesSoftware / control functions • Siemens Safety Integrated; Profibus / Profinet; OPC UA interface • 5‑axis simultaneous machining; B‑axis turning; TRANSMIT / TRACYL • Temperature compensation X/Y • DNC remote diagnostics; WMDS Diagnostic System; Telediagnosis capability • weinCAD EXTRUDER DESIGNER; WeinEXT – Praxis Additional equipment Lsdpfez D Efhox Akqoru • Hinge-belt chip conveyor • Coolant filtration system KF 200: 1,400 l tank; 40 µm filtration; high‑pressure pump 80 bar / 46 l/min; low‑pressure pump 13 bar / 160 l/min; automatic oil skimmer • Oil mist extraction unit: airflow approx. 4,000 m³/h • Operating platform with stairs and railing

Condition: excellent (used), mileage: 529,911 km, power: 235 kW (319.51 HP), first registration: 06/2009, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 9,550 mm, total width: 2,550 mm, loading space length: 7,400 mm, loading space width: 2,510 mm, loading space height: 2,500 mm, Equipment: ABS, cruise control, electric window regulation, power mirror, spoiler, = Additional options and accessories = - Aluminum fuel tank - High Beams - Lift Axle - Radio/CD player - Rear doors - Roof Spoiler - Stairs - Sun visor - Toolbox = More information = General information Number of doors: 2 Year of construction: 2009 Ledpfxjz S T R Nj Akqjru Cab: single Registration number: AA290ZF Technical information Engine capacity: 9.290 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Lift axle Weights Empty weight: 9.600 kg Carrying capacity: 16.400 kg GVW: 26.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Year of construction: 2014, Staircase/stairwell with intermediate landing – used: Price: €2,000 (net), disassembled, packed, and loaded at the location! Item No. 4 Manufacturer: Stow Type: unknown Year of manufacture: 2014 Approximately 10 steps from the ground floor to the landing Further data will be determined Width: approx. 1.25 m With intermediate landing Steps: galvanized grating Stringers and handrails painted Condition: good Ljdpfxozqz Nls Akqsru Available: from approx. Q4/2026 Location: Hamburg

Condition: used, Year of construction: 2024, Manufacturer : WAM MAP Model : WBHC Lodpezv Uzlefx Akqjru Year : 2024 Type: Ploughshare mixer Material: stainless steel Condition: new Volume : 300 L Number of ploughshares: 6 Motor power: 9.2 kW Dimensions: 210 x 90 x 77 cm Control electrical cabinet with variable speed drive. Optional: chopper; original plugin connector available. Optional extras: original platform + stairs. Photos available on request.

Condition: new, Year of construction: 2025, Construction staircase, suitable for use on any construction site. 2 units available in stock. Can be assembled by one person in 15 minutes. Two staircases can be mounted on top of each other. Half-turn staircase, left + right. A complete staircase can be stored on a Euro pallet. Lrodpfx Aszhhl Iekqju