Used Stator for sale (233)

Condition: used, Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knives: 6 Kodpfxjxgtipe Agqsll Rotor knives: 9

Condition: used, power: 160 kW (217.54 HP), Cutting mill TRIA 120-80 FN / Cutting mills New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 7x2 Kedpfxoxgrfvo Agqjll Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Inlet: 800 x 1200 mm

Condition: used, Drive 37kw (ca be changed to max. 75 kw) rotor diameter 500 mm rotor width 600 mm 5 knive scissor cut, Kedpfxoxgrgys Agqell housing hingeable, with 2 stator knives Opening inlet 500 x 600 mm

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new blades, new bearings Drive: 160.0 kW Rotor knives: 7x2 Stator blades: 2x2 Rotor diameter: 700 mm Kedpjxgtqasfx Agqsll Rotor width: 1200 mm Inlet: 800 x 1200 mm

Condition: used, Granulator / Granulators Kljdpfx Agoxb Adlsqjl Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Kljdpfsxgtmuox Agqol Rotor knives: 3 stator knives: 2 Drive: 7,5 kW Double diagonal cut With roller feeder, electric control unit and sound insulation box

Condition: used, GENERAL INFORMATION Speed: 690 / 1410 rpm Explosion protection: The motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Impeller diameter: 130 mm Ksdox Dln Ejpfx Agqjll Power: 2.6 / 4.4 kW Agitator: Disperser Other: Shaft material: 1.4401 (V4A) Stator basket material: 1.4541 (V2A) Total length approx. 1,450 mm Location: Bremen Shaft diameter: 30 mm Shaft length: 770 mm Condition: used AGITATOR 1 Voltage: 380 Volt

Year of construction: 2003, condition: refurbished (used), functionality: fully functional, machine/vehicle number: BF 030003, This heavy duty 1200mm Granulator was refurbished fully in 2020 . Since then it has done only a very few tonnes of light weight containers after the refurbishment. New fixed and fly blades were fitted recently and it has not run since. 4 Rotating blades and 2 Stator blades. The semi solid rotor is water cooled if needed. Single step Belt drive from 110Kw Motor. Up to 1500 kgs per hour depending on the type of materials and feed rate. Air extractio to cyclone and bagging tower for big bags (FIBC) included. Loading conveyor with metal detection tunnel also included. Capable of grinding rubber also as fitted with the water cooled rotor. Two hoppers included , a standard one as shown in pictures and also included is a top entry completely enclosed hopper (not shown) suitable to received pre-shredded plastics or rubber. Klsdev Su A Eopfx Agqol

Condition: new, functionality: fully functional, Year of construction: 2026, For our machines fit parts from German machines Ksdpfx Ajrvi Sksgqjll With water pump !!!! Technical data: Capacity depends on the type of pump . 6-35L / min. Max pressure max. 30 bar. Main motor - 5.5kW, - 400 rpm Basket motor : 0.55kW, - 28 rpm Diaphragm compressor 0.9kw, 250L / min Water pump Minimum water pressure 2.5 bar at machine on Capacity of hopper 145 L +/- 5 bags Height of hopper 910mm Width 720mm Height with motor 160 cm Weight with accessories 285 kg Basic equipment - rotor stator D6-3 - Plastering gun with 12mm nozzle - Pressure mortar hose 25mm, 10m with couplings - 1/2″ air hose - Water pump - Cleaner - Mixer - Spray nozzle cleaner - Hose cleaner - Toolbox with - Operating instructions APPLICATION - gypsum plasters - Gypsum-lime plasters - cement plasters - lime plasters - lime-cement plasters - mineral plasters - insulating plasters - Mortars for filling joints - reinforcing and adhesive mortars - liquid screeds - masonry mortars - self-levelling putties

Condition: used, machine/vehicle number: 14003, Rotor diameter: 300 mm Kjdpsx Aw Afofx Agqsll Rotor width: 600 mm Rotor knives: 3x2 Stator knives: 3 Feed opening approx. 300 x 600 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 12916, Rotor diameter: 350 mm Rotor width: 450 mm Rotor blades: 3 Stator blades: 2 Ksdpowbwq Nsfx Agqsll Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 11629, Rotor diameter: 450 mm Kodpfjghgqaox Agqsll Rotor width: 800 mm 5 x 5 blade rotor (offset) 2 rows of stator blades Inlet cross-section approx. 600 x 800 mm Drive motor 55 kW With soundproof box, mobile

Condition: used, machine/vehicle number: 14018, Rotor diameter: 500 mm Rotor width: 1000 mm Rotor knives: 5 x 2 Stator knives: 2 rows Infeed opening approx. 600 x 1000 mm Klodex Alh Aepfx Agqsl Drive motor: 45 kW

Condition: used, machine/vehicle number: 13293, Rotor diameter: 450 mm Rotor width: 1000 mm Rotor blades: 9 rows Stator blades: 2 Drive motor: 75 kW Ksdpfowmg Smsx Agqoll

Condition: used, machine/vehicle number: 13213, Rotor diameter: 600 mm Klodpfswbwxmjx Agqsl Rotor width: 1000 mm Rotor blade rows: 7 Stator blade rows: 2 Inlet cross-section approx. 720 x 980 mm Drive motor: 90 kW

Condition: used, functionality: fully functional, Agilent 1200 series G1160A 12/13 Sel Valve. The Agilent 1200 Series valves provide the user a comprehensive solutions for more flexibility through solvent selection and column selection. They offer new automation capabilities for sample preparation as well as higher sample throughput with alternating column regeneration. The Agilent 1200 Series valves are fully integrated in the CAN environment (control area network) of the Agilent 1200 Series LC system and can be controlled by the Agilent ChemStation Software. Liquid contacts: Stainless steel and PEEK Port size: Accepts 10-32 male threaded fittings Flow passage diameters: 1.0-mm (0.040”) Kedpjuavnyofx Agqell Volume in flow passage: Stator (includes stator face seal) 6.4 µl/hole, rotor seal 4.0 µl/groov Maximum pressure: 21 MPa (207 bar, 3000 psi) Recommended flow range: 0.2 – 100 ml/min (at high pressures, after the pump) 0.2 – 10 ml/min (at low pressures, in front of the pump 2 for sale. 1 piece/890 EUR. Good working condition. Please check out our other listings as well.

Condition: used, Rotor diameter: 200 mm Rotor width: 270 mm Rotor knives: 3x6 Kedpfjxyax Rjx Agqoll Stator knives: 2 Feed opening approx. 200 x 270 mm Drive motor: 3 kW

Condition: used, machine/vehicle number: 4966, Rotor diameter: 200 mm Rotor width: 180 mm Rotor blade: 3x4 Kodpfxsxyax Do Agqjll Stator knives: 2 Inlet cross-section approx. 200 x 180 Drive motor: 3 kW

Year of construction: 2010, condition: excellent (used), Drive: 75 kW / 990 rpm Infeed opening: approx. 450x580 mm Rotor length: approx. 600 mm Rotor diameter: approx. 450 mm Heavy-duty design Closed solid rotor 3 rows of rotor knives (9 pcs), new 2 rows of stator knives (4 pcs), new With wear protection lining (Hardox), new Screen basket + 1 screen, new With control cabinet, approx. 6 m of cabling newly rewired Housing temperature monitoring Hydraulic power unit Brockenmühle (coarse shredder), ideal for shredding solid parts Test / demonstration possible by appointment Klsdpeh Igygsfx Agqsl

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request. Klsdpow Am Nqjfx Agqol

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator, drive power: 250 kW, control cabinet with star-delta starter. Rotor length: 1200 mm, rotor diameter: 800 mm, number of knives/rotor: 36 pcs, number of knives/stator: 4 x 6 pcs. 2 hydraulically swiveling stators with 2 rows of counter-knives each. Hydraulic pusher, bearing temperature monitoring, central lubrication for rotor bearings. Net weight: 29,800 kg. Year of manufacture: 2005, overhauled in 2025, all wear parts have been replaced. Ksdpfx Agsxiw Hwsqell

Condition: used, No. 10026 Cutting mill Pallmann PS 4-5 Used According to our customer, the machine is fully functional and can be inspected on site Motor power 18.5 kW Rotor diameter 400 mm Ksdpfx Ajxph Ewegqjll Rotor width 500 mm Rotor knives 4x 2 single knives Stator knives 4x 2 single knives Maximum permissible speed of the drive shafts 640 rpm Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, No. 10025 Cutting mill Alpine RO 40/63 Klsdpfxjxph Avs Agqsl Used According to our customer, the machine is fully functional and can be inspected on site Motor power 30 kW Rotor diameter 630 mm Rotor width 400 mm Rotor knives 5 rows with 3 knives each Stator knives 1 row with 3 knives to the front and 2 rows with 3 knives to the rear Maximum permissible speed of the drive shafts 560 rpm The cutting mill Alpine RO 40/63 with patented cross-shear rotor guarantees optimum material distribution with maximum cutting performance. The hinged screen holder allows easy removal of the screen and perfect access for cleaning the machine and replacing the blades. Ideal for industries such as recycling (for blown film, cables, plastics, etc.) and food (tea, spices, dried vegetables, etc.). Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Manufacturer: Rapid Model: 2645-KU 3 rotor blades 2 stator blades Klodpfswg R S Rjx Agqel Power: 12 kW Slow-speed mill with soundproof enclosures

Condition: excellent (used), functionality: fully functional, Heavy-duty cutting mills Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Inlet opening 700 x 1000 mm Kodpfx Agjufi Rxsqoll Open rotor 600 mm diameter x 980 mm wide Rotor blades: 7 Stator blades: 2 plus blade set: 2 Blade setting table