Used Stator for sale (217)

Condition: new, Year of construction: 2025, Cutting Mill PC52120R 75 kW in stock Rotor diameter (mm): 520 Rotor width (mm): 1200 Drive (kW): 75 Godpfx Ajydcmmef Sjit Rotor knives (rows): 10 Stator knives (rows): 6 Weight (kg): 5200

Condition: new, Year of construction: 2025, Cutting Mill PC52120R 75 kW in stock Giedpfx Afjydclvs Sjt Rotor diameter (mm): 520 Rotor width (mm): 1200 Drive (kW): 75 Rotor knives (rows): 10 Stator knives (rows): 6 Weight (kg): 5200

Condition: reconditioned (used), We manufacture the original. We offer a used, workshop-reconditioned granulator GA75 / 9 for sale. - Motor power: 75 kW, new motor - 9 rows of rotor knives, 4 stator knives - new rotor with completely new bearings and new, hardened wear parts. Inquiries from business customers only! Gedpfxeh S U Ryo Af Soit

Year of construction: 2007, condition: used, functionality: fully functional, The Moretto auxiliary granulator is for sale; Power: 2.2 kW Gisdpfeyk Effex Af Sst Blades: 3 pcs, sharpened Stator blades: 2 pcs Screen: 6 mm Mobile (on wheels)

Year of construction: 2010, condition: excellent (used), Thumm SU100 P current UV dip impregnation system with exhaust air cleaning system Current UV impregnation is an innovative dip process for low-voltage round wire windings.  In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow.  When the heated winding is immersed, the impregnating agent becomes thin and can thus penetrate into the smallest cavities.  With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can flow off again after dipping on the cooler stack of sheets. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the stack of sheets. The elimination of conventional oven drying saves energy and time. Together with the use of a low-emission impregnating agent, the environmental balance is very positive. Thumm electric UV dip impregnation system Gjdpohuffcofx Af Seit Type: SU100 P Stators: max. 250 mm Ø  Connected load: 15 kVA Fuse: 32A Connection: 3 phase 400 Volt 50 Hz Power supplies 2 x 50V / 280 A Thumm aerosol separator 400 V 1.85 KVA Complete plant closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 1995, condition: used, functionality: fully functional, 3 rotor blades Gijdpfev Nnr Iox Af Sjt 2 stator blades Blade inlet 220 x 180 mm Power 3 kW

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: A05, Mondomix - Minimondo A05 Buhler Model A 05. (2013) (previous used : food products) Capacity : 5 - 45 Litres/Hr. Density produit : Input: 1,0 kg/l - Output: 0,4-0,5 kg/l Jacketed stator System complete: - Systèmes de dosage manuel et automatique de l'air System with airinjection manual and automatique - with stainless steel control cabinet - 2 stainless steel hoppers capacity 12,5 litres - indag inline mixer type DLM1 Giedpovv S Itefx Af Sst Last used in a Pilot Plant 220v 1 phase 50/60hz. 8 Bar.

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Gijdjucw S Sepfx Af Sst

Year of construction: 1977, condition: ready for operation (used), A Rapid heavy-duty granulator is available. Only unreinforced polyolefins were ground with the mill, so it was not subjected to any load. Flour chamber opening X/Y: 1050mm/600mm, motor power: 75kW, rotor knives: 2x5, stator knives: 2, sieve: 8mm, throughput: depending on material. Machine dimensions X/Y/Z: approx. 2750mm/2100mm/2850mm, machine weight: approx. 4550kg. Documentation available. On-site inspection is possible. Giedsvwcxfepfx Af Set

Year of construction: 2016, condition: ready for operation (used), Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Gjdpfxeubyyvj Af Soit

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Gijdpfx Ajv Extbjf Set

Condition: new, Year of construction: 2024, machine/vehicle number: 30065973-10, Unused 100-liter Ekato Twin Motion Vacuum Mixer, model UniMix, type SRC 100, with 316L stainless steel product contact surfaces. It has a 100-liter maximum working capacity and a 5-liter minimum working capacity, rated for -1/+2 bar (29 psi and full vacuum) at 133°C, and jacketed for -1/+4 bar (58 psi and full vacuum) at 151°C. Features include a top-mounted Ekato Paravisc axial Z-type mixer with bottom and sidewall scrapers, driven by a 3 kW motor. It also has a bottom-mounted Ekato S-Jet 500 high-performance rotor/stator homogenizer powered by a kW motor, 480 volts, and a control panel with PLC and VFD controllers, as well as an operator HMI. The vessel is ASME-rated, with Ekato project# 30065973-10, built in 2024. The system is unused, still on its original shipping skids from Ekato, with FAT performed. Giodpoyba Szofx Af Sst

Condition: excellent (used), functionality: fully functional, Slow-running shredder with gearbox Cutting width – 250 mm Gedpfeyf I Tbsx Af Soit Motor power – 3 kW Rotor speed 100 rpm Number of rotor knives – 20 pcs Number of stator knives – 2 pcs 9 units available, in excellent condition Throughput up to 50 kg/h Price 1,350 EUR per unit

Condition: like new (used), machine/vehicle number: FDL-150-100E/NC, functionality: fully functional, pressing force: 150 t, table width: 800 mm, clearance between the columns: 1,250 mm, total length: 1,200 mm, working height: 600 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. • Useful lifting capacity of the table for moving 4 tons. • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector. Gijdpfxowpg Aws Af Sst

Condition: excellent (used), DREHER MILL S26 / 41 VS with cyclone and fan Power: 11 KW Godpfx Aogphqcsf Sjit Rotor diameter: 260 mm Rotor width: 410 mm 4 rotor knives, 2 rows of stator knives Inlet cross section approx. 260 x 410 mm Brqvu3zxfl Cutting mill with integrated noise protection. For plastic processing pipes, profiles, injection molding

Condition: new, Year of construction: 2026, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 1,500 mm, Machine configuration ROTAMILL 2819 - NC Rotary table, Ø1.800 mm - NC Fork-type Milling Head M-SERIES (A- and C-axis) - Milling spindle CST-42-180-S - Tool chain magazine, 54 pockets, HSK-A(T)63 - Chip conveyor - NC Control HEIDENHAIN TNC 640 - Technology package turning - 2-fold head change magazine, fully automated - Preparation of the machine for wet machining - Oil mist extraction unit, approx. 3.000 m³/h - Workpiece measuring touch probe BLUM TC 60 - Tool measuring, BLUM LaserControl Single NT - Kinematic 3D-calibration software - Heidenhain - Kinematic tool kid - CAD-Import (.step; .iges; .dxf) - Remote diagnosis (Teleservice) - Operator and maintenance training (1 day) excl. travel cost and expenses - Loading and (seaworthy) packing charges, FCA Jülich as per Incoterms 2020 - Installation and run-off inside Germany incl. travel costs and expenses OPTIONAL - Coolant unit Technical data - Traverses X-axis = 2,800 mm - Traverses Y-axis = 1,900 mm - Traverses Z-axis = 1,500 mm - Portal clearance (roof)- width (Y) = 2,250 mm - Portal clearance - height (Z) = 1,465 mm - Total weight, approx. = 41,000 kg - Feed rate in X, Y and Z = 50 m/min - Acceleration in X, Y and Z = 4 m/s2 - Feed force in X, Y and Z = 10.000 N Rotary NC-Table Rotary table (C1-Axis) - Face plate, standard = Ø 1,800 mm - Interference diameter = Ø 2,200 mm - Payload – milling, max. = 6,000 kg Drive C1-Axis – turning table HT - Swivel range = 360° (endless) - Rotational speed, max. = 30 rpm - Torque, max. = 7,473 Nm - Clamping moment = 13,000 Nm Fork type NC-Milling-Head M-SERIES (A-Axis) Drive A-Axis - Swivel range = ±110° (60 rpm) - Speed, max. = 100 rpm - Feed rate, max. = 600°/s - Nominal moment = 840 Nm - Clamping moment = 4,000 Nm Drive C2-Axis - Swivel range = ±360° - Speed max. = 65 rpm - Feed range, max. = 390°/s - Nominal moment = 1,020 Nm - Clamping moment = 4,000 Nm Milling spindle CST-42-180 S - Power, S1 (S6-40% ED) = 42 (53) kW - Nominal moment = 2,000 rpm Gedpotwatdofx Af Soit - Torque, S1 (S6-40% ED), max. = 201 (253) Nm - Speed, max. = 12,000 rpm - Motor type = synchron/8-pole - Tool holder = HSK-A63 - Clamping system = hydraulic - Clamping force = 20 kN - Installation dimension, stator = Ø 180 mm - Spindle nose, length = 110 mm Accuracies according to VDI / DGQ 3441 - P (X,Y,Z) = 0,012 mm - P (C, A) = 5" - Ps (X,Y,Z) = 0,008 mm - P (C, A) = 3" Tool chain magazine with double arm gripper - Tool pockets = 54 - Tool holder = HSK-A(T)63 - Pocket distances = 110 mm - Tool diameter, fully loaded = Ø 105 mm - Tool diameter, max. = Ø 150 mm - Tool length, max. = 300 mm - Tool weight, max. = 8 kg Footprint & Weight - Length (X) = 6,830 mm - Width (Y) = 6,970 mm - Height (Z) = 5,150 mm

Condition: new, +++++ We manufacture the original +++++ Non-binding offer Copper cable recycling machine 1 piece GA 37- 450 granulator cutting unit - completely mounted -incl. motor ( 37 KW ) - with inlet hopper, outlet hopper and belt protection cover - 1 set of knives ( 5 rotor knives and 2 stator knives ) Gijdpfeflkz Hjx Af Sst - 1 sieve - mounting, system - integration in your plant - ex our factory Our general terms and conditions apply

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) Gjdpsx Tdyzefx Af Sjit For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: as good as new (ex-display), Infeed width: 720 mm Infeed height: 330 mm Rotor diameter: 1,000 mm Godogabfqspfx Af Ssit Rotor knives: 2 pcs Stator knife: 1 pc Infeed unit: 2 x 3 rollers Motor: 110 kW Machine weight: approx. 8,000 kg

Condition: new, Exhibition machine Infeed width: 1,400 mm Infeed height: 550 mm Rotor diameter: 1,600 mm Rotor knives: 4 pcs Stator knife: 1 pc, externally adjustable Gjdpegabfbefx Af Soit Infeed unit: 2 x 5 rollers Motor: 250-500 kW Machine weight: approx. 30,000 kg

Year of construction: 2010, condition: excellent (used), Drive: 75 kW / 990 rpm Infeed opening: approx. 450x580 mm Rotor length: approx. 600 mm Rotor diameter: approx. 450 mm Heavy-duty design Closed solid rotor 3 rows of rotor knives (9 pcs), new 2 rows of stator knives (4 pcs), new With wear protection lining (Hardox), new Screen basket + 1 screen, new With control cabinet, approx. 6 m of cabling newly rewired Housing temperature monitoring Hydraulic power unit Brockenmühle (coarse shredder), ideal for shredding solid parts Test / demonstration possible by appointment Godpfxeh Igygo Af Ssit

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Gisdpfew Am Nqox Af Sst Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Year of construction: 2023, condition: new, Motor cutter, motor stator recycling machine Power:4KW/380V Applicable scope: Recycling copper winding of stator within Φ8cm - Φ25cm. Speed: 8-30p/h Giodpfx Afjmcbpce Set Dimensions( L*W*H)：180cm*90cm*195cm Weight: 1450Kg

Condition: new, Cutting mill / Granulator brand: NEUE HERBOLD Gisdpfeckg Rfjx Af Sst manufacturing year: brand new machine drive: 37 kW Rotor-width: 450 mm Working-width: 600 mm Rotor with 4 blade-rows 2 stator-blade rows Roller feed hopper Size reduction of film, hollow containers, barrels, boxes, pipes, profiles,...

Condition: new, Cutting mill / Granulator brand: NEUE HERBOLD manufacturing year: brand new machine drive: 55 kW Rotor-width: 450 mm Working-width: 1000 mm Rotor with 5 blade-rows 2 stator-blade rows Roller feed hopper Gsdpjckg Raofx Af Seit size reduction of loose film, hollow containers, barrels, pipes, profiles,...