Used Store Fittings for sale (4,326)

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder Rjdsviwdmjpfx Agzjl 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) Rjdpfxjwphixe Agzol - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle...

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum Rjdpfx Ajffphbogzel -Transport dimensions: 493/465/H495 mm -Weight: 13 kg

Condition: used, Year of construction: 2022, 2022 | Iveco Daily 35S16H3.0D with Tool Box on both sides | Used Commercial Vehicle - Tipper 📍Location: Germany, Rodgau 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 40 inspection points 39 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Engine malfunction Add Blue Code stored Redpfox Rkwnox Agzel 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39879 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), mileage: 482 km, color: blue, lifting height: 30,000 mm, Year of construction: 2020, operating hours: 482 h, Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.500 kg Rsdpfx Agsx N Hwnjzel Functional Lifting capacity: 1.500 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Delivery terms: EXW Production country: DE Additional information Please contact Michael Overmeer for more information Böcker AHK 30/1500 trailer crane construction year 2020 with only 482 hours from the first owner. Machine is like new (has always been stored indoors) and has among other things: Honda petrol engine, wheel drive, hydraulically support legs, hydraulic jip, remote control. Changes and typographical errors reserved.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025, input voltage: 230 V, warranty duration: 12 months, DGUV certified until: 12/2026, type of input current: AC, total length: 950 mm, total width: 600 mm, total height: 660 mm, input frequency: 50 Hz, space requirement height: 660 mm, space requirement length: 950 mm, space requirement width: 600 mm, capable device 2-layered caustic curtain suitable for sheet size 600 x 400 mm Extractor for the store semi-automatic, with sliding curtain Table top made of stainless steel Dimensions in mm: 600 x 950 x 660 WxDxH optional: Redjdlp Ryopfx Agzsl - Stainless steel movement with locking rollers with 5 inserts for sheet size 600 x 400 mm

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Redpfox Rhlcjx Agzol Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: used, machine/vehicle number: WDB9066571P16xxxx, mileage: 333,000 km, Year of construction: 2015, Please contact ATS Norway for more information Please provide reference number upon request: 21322 Specifications: Km: Approx. 333,000 Gearbox: Automatic Euro 6, 163 hp Tires (see pictures) Side door 4x2 Tow bar 3 seats Extra lights Interior shelving Radio/CD Climate control/AC Service performed by owner Ready for delivery Redpfxjxctggo Agzsl Description:Mercedes Sprinter 516 Van from 2015.The vehicle is sold without tools, but with interior fittings.Ready for delivery. Km: 333000 HK: 163 Technical approved: Yes EU-approved until: 13.06.2026 Own weight: 2885 Payload: 2040 Model: Sprinter 516

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper -Ventilation duct inlet with: filter -Outlet: Ø 390 mm -Dimensions: 1340/1100/H600 mm -Weight: 114 kg Redpfefff Niox Agzol

Condition: excellent (used), Year of construction: 2008, MACHINE DATA Type Machining center - Vertical Make SPINNER Type MVC 1100 Rjdpjttu A Hjfx Agzol Year of construction 2008 CNC control Siemens Country of origin Germany Delivery time immediately Freight basis ex location TECHNICAL DETAILS x-path 1100 mm y-path 510 mm z-path 510 mm rapid traverse 18/18/15 m/min Siemens control Type 840 D SL Shop Mill Table surface 1200x600 mm Workpiece weight 1000 kg Spindle speed - infinitely variable 8000 rpm Spindle holder: ISO 40 Tool changer 24 Cooling through the spindle 20 bar Machine weight approx. 8 tons Space requirement approx. 3000x2350 m Store mill Preparation for 4 axis

Condition: used, Year of construction: 2014, operating hours: 292 h, 2014 | Genie GS-2032 (8 m) | Used Scissor Lift | 292 hours 📍Location: Germany, Kulmbach 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 25 inspection points 25 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine in good, working condition. No issues were identified during the inspection. The battery is older, and was working for the duration of the inspection. It could not be verified if the batteries still sufficiently hold their charge for normal application or if new batteries should be fitted. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38263 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Rodpfx Asx N Uvlogzol 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2018, Baler, Bramidan B20 - second-hand - : Price ex location: 7.750.-€ (net) Manufacturer: Bramidan Type: Vertical raw material balers B20 Year of construction: 2018 Bale weight Cardboard (kg) 200-250 Plastic film (kg) 250-300 Pressing force 20 t Bale size WxDxH (mm) 1200 x 800 x 800 Filling opening WxH (mm) 1200 x 480 Power supply 3x400V 50Hz 16A Motor (kW) 4.0 Cycle time average (s) 36 / 21 Dimensions WxDxH (mm) 1775 x 1030 x 2790 Transport height: 2.58m Weight (kg) 1250 Stroke (mm) 750 Number of tie-downs 4 Type of strapping Strap Finished bale light Yes Bale ejection Automatic Redjrl I Ivjpfx Agzol The classic among raw material balers The B20 is versatile and is used everywhere. The recyclable materials must be "dry & soft". Particularly suitable for raw materials such as cardboard, paper, cardboard packaging (PPK) and film. Stackable bales, up to 900 kg per pallet The bales are stacked 2 or 3 high on one; enormous space saving. Simple bale strapping Automatic bale ejection Short cycle time thanks to high speed Strap rollers mounted on the front allow installation directly on the wall Pallet-sized bales that can be stored outdoors under cover 3xx230x-440 4kW Amps: 25/16 dB 62-64 Condition: good - very good Available: immediately Location: 09116 Chemnitz

Condition: reconditioned (used), Deckel FP1 AKTIV (3-Axis Active) Machine No. 2102-5745 Year of manufacture: approx. 1988 Travel distances: X-axis: 300 mm Y-axis: 150 mm Z-axis: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Redpfx Agjxpwfgjzel Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - HEIDENHAIN 3-axis active digital readout, type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and extends horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Centralized lubrication Space requirements (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry measurement videos can be provided upon request. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring length 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Centralized lubrication checked - Heidenhain digital readout overhauled - New wiper set installed - LEDs in the Active display replaced - Oil changed - Vertical milling head fitted with new bearings - Oil sight glass replaced Net price, ex stock, free loaded

Condition: used, Metal cabinet, workshop cabinet, locker cabinet Compartment locker with 20 individual lockable compartments Width: 1200 mm Depth: 520 mm Rjdpfx Aex N Ikpsgzjl Height: 1850 mm Compartment size (W x D x H): 260 x 480 x 300 mm Bottom row compartment size (W x D x H): 260 x 480 x 280 mm - Fitted with key lock, each compartment with its own key - Colour: Silver Weight: 116 kg Good condition

Condition: good (used), Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Redpjd A U Rkofx Agzsl -Outer frame made of: galvanized sheet steel -Dimensions: 1575/1275/H175 mm -Weight: 50 kg

Condition: new, Unused Briggs of Burton approximately 1,200 litre 316/316L stainless steel process vessel. Unit measures approximately 1,200mm diameter x 870mm straight side. Unit has bolted dished top and welded hemispherical bottom head. Internal rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. External 304/304L stainless steel jacketed rated 10 bar/full vacuum design pressure at -20 to 210 deg.c. Unit has top entry 316/316L stainless steel gate type agitator fitted with PTFE wall scrappers, driven by 11kw motor/gearbox. Unit includes bottom entry Silverson model BE600 316/316L stainless steel emulsifier driven by 22kw motor. Unit is mounted on 304/304L stainless steel legs. Specifications: Redpfxjx Hv U Ro Agzjl Power: 11 kW

Condition: good (used), Electromagnetic clamping plate 400 x 170 mm Manufacturer SAV type 112-17.5/45 watts Rodpfxjvr Stnj Agzsl with sine swivel 24 volts with 4-pin plug. Was last on a JUNG grinding machine. But with the appropriate plug it also fits other models e.g. ELB, ABA, ZIERSCH; G+H etc. The magnetic plate can be swiveled with end dimensions using the sine function. Very good condition. Price net ex warehouse

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum Redpfx Agjffphcezel -Transport dimensions: 1100/580/H490 mm -Weight: 13 kg

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse Redpfjvr Stuox Agzjl

Condition: good (used), Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: Steel sheet Rodpfscba T Dex Agzol -Dimensions: 1600/660/H800 mm -Weight: 38 kg

Condition: good (used), Extraction slides, ventilation duct slides, slides for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Length: 470 mm -Connection: Ø 500 mm -mechanical: flap Redpscba Txofx Agzel -Material: Steel sheet -Quantity: 1x slider available -Price: per piece -Dimensions: 550/470 mm -Weight: 22 kg

Condition: good (used), Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 515 mm Rjdpfx Aecba T Aegzsl -Material: Steel sheet -Number: 2x angles available -Price: per piece -Dimensions: 900/600/H610 mm -Weight: 22 kg

Condition: good (used), Bezel, setting stick, lynette -Manufacturer: Homemade, fits Meuser, steady rest from lathe type MV SKV/2-1 -Bezel: max. aperture Ø 370 mm -Peak height: 460 mm Rodpfxsiaqmbe Agzsl -Technical drawing: see photos -Overall dimensions: 910/255/H985 mm -Weight: 152 kg

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 57.3 -Turning diameter: 400 - 1600 mm -Travel: X 180 mm / Z 60 mm Redpfewbdrtex Agzol -Drive motor: 1.1 kW -Accessories: nsport and assembly frame, individual components see photos -Dimensions: 1930/1280/H1000 mm -Weight: 730 kg

Condition: good (used), Lathe, flange lathe, heavy lathe, lathe, lathe, flange and fitting surface lathe, slewing ring lathe, flange lathe, mobile lathe, transportable lathe -Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) -Type: D 56.4 Rodpewbd Ibsfx Agzol -Turning diameter: up to approx. 900 mm -Travel: X 110 mm / Z mm -Drive motor: 0.55 kW -Dimensions: 1660/1700/H470 mm -Weight: 224 kg