Used Store Fittings for sale (3,738)

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-200 12 Chanel Pipetter (Button Colour-code Green) The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Gbjdpfx Aloxv Dile Uou Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–200 µL range) Increment: 0.2 µL manual adjustment. Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-1200 8 Chanel Pipetter (Button Colour-code Blue 100-122 LTS The unit is in full working condition and is ready for immediate use Key Features Gbjdpfjxv Duhox Al Uou LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–300 µL range) Increment: 0.2 µL manual adjustment. Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)

Condition: used, Year of construction: 1996, Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor belt sections and components palletized - ready for immediate collection. Technical data - Manufacturer: KHS (Klöckner Holstein Seitz) - Model: Innopas P II SG 30-200 - Year of manufacture: 1996 - Machine type: tunnel pasteurizer - Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format) - Treatment area: 113.5 m² - Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative - Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l) - Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format - Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l) - Pasteurization units: approx. 5 PE - Machine water content: approx. 14.4 m³ - Water consumption at nominal capacity: approx. 1.5 m³/h - Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h - Installed power: approx. 66.2 kW - Electrical connection: 400 V, 50 Hz - Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm - Required entry opening: approx. 2.7 x 3.0 m - Net weight: approx. 27,500 kg - Noise level: ≤ 85 dB(A) according to ISO 3744 Equipment - Siemens SIMATIC S5 PLC (main control) - Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel - Danfoss frequency drives - Modular plastic conveyor belt with drainage openings, belt sections palletized - External pump assemblies and inspection windows Gbedpszwxu Ssfx Al Ueu - Electrical cabinets with main disconnect switch - Original KHS documentation (datasheets and drawings) Condition Used. The machine is completely dismantled and stored; belt sections, piping and components are palletized for transport. The machine can be visited on request. Availability Immediately. Location: Germany. Loading by the seller is possible.

Condition: ready for operation (used), Year of construction: 1993, Underground liquid gas tank farm incl. pumps and control system The tank farm was used to store propane/butane and consists of the following tanks: 2 x 93,674 ltr. (15.6 bar, year of construction: 1993, ø 2,000 mm, storage medium: propane/butane) 1 x 79,208 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) 1 x 58,101 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) 1 x 52,145 ltr. (15.6 bar, year of manufacture: 1993, ø 2,000 mm, storage medium: propane/butane) Gbedpfx Alsu Awitj Uou The tanks are buried underground and each has a dome shaft and corresponding monitoring fittings. The filling station incl. gas displacement line is available and installed (see photos). Five self-priming side channel pumps (Sterling, model CEHB) are installed for withdrawal. The system control is available and installed. All documentation is available.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Godpfxoykug Ss Al Uobu Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: good (used), Year of construction: 1989, machine/vehicle number: 8906756, functionality: fully functional, actuation type: pneumatic, overall weight: 84 kg, GRASS BBM /ST with adapter for BLUM fittings Gsdpfx Alszvn N No Ujbu Row drilling unit – hinge plate drilling – drilling for base plates – drilling for press-in dowels – adapter for pressing in the hinge plates and base plates.

Condition: used, Year of construction: 2011, Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data Gsdpfezrihxex Al Uebu - Manufacturer: M+F KEG-Technik - Model: MICROMAT M 1/1-F KeyKeg - Year of manufacture: 2011 - Machine type: semi-automatic KeyKEG filling machine - Capacity: 50-60 KeyKegs per hour - Container formats: 20 l and 30 l KeyKEG - Fitting type: KeyKEG fitting - Connection voltage: 230/400 V, 50 Hz Equipment - EC Declaration of Conformity (Machinery Directive 2006/42/EC) - Technical documentation Condition Used. The machine has already been dismantled and is stored. Availability Immediately available. Location: Belgium. Handling and truck loading are included.

Condition: used, Year of construction: 2012, Deck oven, electric, multi-tiered, WP Matador Store 6.4 Year of manufacture: 2012 Condition: functional Drive: Electric Navigo control system (touchscreen) Gbjdez A Stvjpfx Al Ueu 4 baking chambers, each with a baking area of 60x40 cm Exhaust hood, year of manufacture: 2016 Proofing cabinet for 10 baking sheets, 60x40 cm, year of manufacture: 2016 Includes operating manual.

Condition: ready for operation (used), functionality: fully functional, !!! We have a shipment of 11 pcs coming in. Price is for one pc only !!! Specially designed for rotary evaporators, distillation, filtration, vacuum ovens and vacuum drying. With chemical-resistant diaphragm vacuum pump and vacuum controller VCpro600. To ensure a freely selectable vacuum of ±1 mbar, the pump speed is continuously adapted to the gas load. Advantages: Faster process results are ensured by constant evaporation and degassing Automatic vacuum adjustment and control Controller with large, multilingual colour display and light/dark screen mode for optimum visibility Integrated solvent library with stored distillation-specific parameters and freely adjustable boiling points; storage of individual pressure curves for novel processes possible With communication interface for remote control/monitoring, for downloading logged process data and for software updates Low-noise operation through speed reduction Gbodpfx Aowvluxol Uou Technical Information Type LVS 105 T-10 ef+ System LVS 105 T-10 ef+ Suction capacity (l/min) 18.0 End vacuum (abs.) 2,0 mbar Connection for hose inner Ø 8 mm Materials in contact with media pump head: PTFE with carbon fibre reinforcement diaphragms: elastomer with PTFE coating valves: PEEK seals: EPDM screw fittings/connecting elements: PP, PVDF vacuum hose: PTFE Port RS 232, LAN W x D x H 250 x 260 x 435 mm Weight 9,5 kg Mains connection 115-240 V, 50/60 Hz Good working condition. Please check our our other listings as well.

Year of construction: 2025, condition: new, Introducing the Xiros Mikro—a compact, bench-top Freeze Dryer engineered for efficiency and versatility. With an 8 kg ice capacity, it can extract up to 4 kg of ice from your products within 24 hours, making it ideal for small to medium batches. Key Features: - Adaptable Tray System: Comes standard with five electrically heated shelves; expandable up to nine to accommodate varying batch sizes. This flexibility allows you to process different quantities efficiently. - Candy-Pop Feature: The new Candy-Pop feature enables you to freeze-dry candies with just the touch of a button, simplifying the process for confectionery applications. - Customizable Processing: Offers manual and automatic modes, allowing you to program up to 16 unique steps for tailored drying recipes. This customization ensures optimal results for various products. - Efficient Design: Low-profile construction facilitates easy loading, while the stainless steel interior ensures durability and hygiene. The design also contributes to market-leading energy efficiency. - Advanced Vacuum Technology: Compatible with scroll dry vacuum pumps, ensuring low maintenance and quiet operation. This feature enhances the overall user experience by reducing noise and upkeep. - High-Quality Construction: Built with premium components for reliability and longevity. The innovative shelf-stack design improves temperature control accuracy by 60%, eliminating the use of adhesives and reducing out-gassing. - User-Friendly Interface: Features a 5-inch color touchscreen for easy monitoring and control, with USB connectivity for data logging and software upgrades. This interface simplifies operation and allows for seamless updates. - Warranty: CE certified and includes a 2-year commercial-grade warranty for peace of mind. This certification ensures compliance with global standards, and the warranty reflects the manufacturer's confidence in the product's durability. What’s Included - Xiros Mikro Freeze Dryer - Scroll Vacuum Pump - 5 tier shelf stack plus trays supplied as standard - Vacuum Hose - Clamps (set of 2) - Sealing Ring (set of 2) - Drain Hose (set of 2) Godpfexxx I Ujx Al Uebu - Quick Setup Card Features - Customizable Processing: With manual and automatic modes, program up to 16 unique steps to tailor your drying recipes to perfection. Store your customized settings at the touch of a button. - Efficient Design: The low-profile design facilitates easy loading, while the full stainless steel interior guarantees durability and hygiene. - Adaptable Tray System: Start with 5 electrically heated shelves and expand to a maximum of 9 shelves, providing flexibility for varying batch sizes. - Advanced Vacuum Technology: Recommended for use with a scroll dry vacuum pump, ensuring low maintenance and quiet operation. - High-Quality Construction: The full stainless steel interior and high-performance components ensure durability and hygiene, while the low-profile design makes loading a breeze. - Warranty: The Xiros Mikro is CE certified and comes with a 2-year commercial-grade warranty, providing peace of mind. - Market-Leading Ice Holding Capacity: Designed for larger batches or longer defrost intervals. - 24/7 Operation: Designed to run continuously around the clock. - Premium Components: High-quality and performance parts from leading suppliers, ensuring reliability. - High-Performance Vacuum Technology: Utilizes specialized vacuum technology fittings and connectors for maximum efficiency. - Ice Condenser Specific...

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar Gbedpfx Aezt Twyol Uou 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing Gbedpjvrfivofx Al Usu - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2011, Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously operated in a returnable glass production line. The machine is designed as a head machine with parallel bottle infeed and discharge and is suitable for high-speed labelling applications. The system is equipped with two labelling aggregates: one for neck and front labels and one for back labels. The neck label is applied using hot glue for closure sealing, while the remaining labels are applied using cold glue. The machine is fitted with two glue pumps and includes one spare hot glue unit. The back labelling station is disengageable, while the front station is permanently installed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, the machine is suitable for demanding returnable glass operations. The machine has accumulated approximately 44,350 operating hours as of January 2025. Spare parts documentation is available.   Technical Data Manufacturer: KRONES Model: Topmatic Year of manufacture: 2011 Machine type: Rotary cold glue / hot glue labelling machine Bottle plates: 36 Capacity: up to 33,000 bottles per hour Direction of operation: Parallel bottle infeed and discharge Bottle type: Returnable glass bottles Operating hours: approx. 44,350 h (as of January 2025) Labelling stations: - 2 labelling aggregates - 1 × Neck and front label station - 1 × Back label station (disengageable)   Glue system: - 2 glue pumps Gbsdpfx Aleyt Iltj Uou - Hot glue for neck label (tamper-evident / closure sealing) - Cold glue for front and back labels - 1 spare hot glue unit included Dimensions: - Depth: 4,300 mm - Width: 3,300 mm   Electrical supply: 400 V / 230 V, 3~ / N / PE, 50 Hz, 22 A Documentation: Spare parts documentation available Condition: Used, already dismantled and stored  

Year of construction: 1987, condition: used, YARN BOBBIN STEAMER / CONDITIONER FULLY AUTOMATIC VACUUM YARN CONDITIONER FROM A SWISS TEXTILE MILL SUITABLE FOR ALL TYPE OF YARNS -> COTTON, BLENDED AND FILAMENT & TWISTS MAKE : WELKER ( GERMANY) Mc. No. : 1430 Y.O.C. : 1987, was only for 3 years in a mill inn Switzerland, Thereafter cleaned, preserved and stored in warehouse VOLUME : 9200 L MAX. TEMPERATURE : 150˚C WORKING LENGTH : 4000 MM DIA ( WITHOUT INSULATION) : 1600 MM DIA WITH INSULATION : 1720 MM CONSISTING OF : STEAM AND FIXATION ( FOR PRESSURE OF -1 TO +4 BAR) - WITH AN AUTOMATIC HYDRAULIC DOOR - WITH COMPLETE OIL HYDRAULICS - WITH WELKER SECURITY SYSTEM - WITH COMPLETE VACUUMING - FLOORING OF CHROM-NICEL METAL - FULLY AUTOMATIC COMPUTERISED - WITH INSULATION - AUTOMATIC TRANSPORT SYSTEM ‘P’ (PLATFORM) FOR YARN ON EURO-PALLETS AS WELL AS ON WAGONS ( 1000 MM LONG X 860 WIDE X 1000MM HIGH ; 4 CAN FIT IN ) WITH INTENSIVE AIR & STEAM CIRCULATION Gsdpfey Spm Djx Al Ujbu WITH AUTOMATIC TRANSPORT SYSTEM ‘P’ POSSIBILITY OF PRE-WARMING OF YARN WITH WARM AIR

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Offered for sale is a Komet ISG3100 shrink fitting machine for the precise and rapid shrinking of tools in shrink chucks. The device is ideally suited for use in CNC machining, toolmaking, mold making, and modern cutting processes. Thanks to the induction technology, tools can be quickly and reliably shrunk in and out. The compact design and ease of operation make the device an efficient solution for daily tool preparation. Features: Manufacturer: Komet Type: ISG3100 Induction shrink fitting technology Fast heating of shrink chucks Gbsdpjzu Ikksfx Al Uou Simple and safe operation Suitable for various tool holders Compact and robust industrial design Ideal for CNC machining and tool management Advantages: High concentricity accuracy of the tool holders Fast tool changes Reliable tool clamping Reduction of setup times Long service life of the tool holders Suitable for series production and single-part production with various holders from HSK30 to HSK100 Used, fully functional. Shows signs of wear consistent with its age.

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Gbjdpfx Aljzlt Ayo Uju This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: used, Year of construction: 2006, Lot of seven sturdy, used rack pallets, stackable. Gjdez Dw Hkspfx Al Ujbu Dimensions approximately 320 x 120 x 120 cm (L x W x H), individual weight approximately 125 kg. Fitted with 12 mm vehicle construction board; the racks can be stored on the pallet, see photos. Payload 1.3 tons, stacking load 3.9 tons, year of manufacture 2006. Transport dimensions approximately 320 x 120 x 200 cm (L x W x H). Weight approximately 900 kg. Sold only as a complete package; the price is for all 7 pallets together.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, power: 1.1 kW (1.50 HP), BLUM mortise drilling machine, complete with the base cabinet, plus a multi-spindle boring head with 9 spindles. Gbsdpszzzd Rsfx Al Usu

Condition: as good as new (ex-display), Fronius TPS 2700 Pulse Device Ready to Weld ---> Scope of delivery: ➤Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) ➤Fronius hose package with display on the torch (arc, amperage jobs, etc. adjustable from the torch) ➤Ground cable 3-4m ➤Pressure regulator with new blade ➤Gas hose ➤15kg spool adapter ►►► Perfect for mobile use This device is perfect for quick and mobile use. Quick to fit in the car and easy to take anywhere - yet no loss of welding quality. Also suitable for stationary use, of course. Questions: ----- Gedpovl D Idefx Al Uobu How old is the machine? Our customers usually retire their devices between 3-5 years old. Sometimes more, sometimes less. What is the condition, and does the device even work properly? Yes! Everything works as it should! We disassemble, clean, replace wear parts, reassemble, and test all devices. The devices are clean; we don't have any that look completely finished! They're in great condition! Only minimal signs of wear. All pictures are original photos of our devices. They're sample images. We don't have any displays with burn holes. Can I negotiate the price with you? If you buy multiple devices, we can discuss the price. Is shipping possible? Yes, it's possible. We pack the device on a pallet and ship it insured via our shipping company. Can I view the devices somewhere? We have an online store; you can come by to pick up a device, and of course, you can also test it with us before paying. We don't have regular business hours. Everything works by appointment. All devices are assembled according to customer specifications and delivered after payment—that's our standard procedure. Do you offer a warranty? No, we don't offer a warranty. We sell like-new, used, affordable professional welding equipment, usually for 1/4 to 1/2 the new price. For the difference compared to a new device, you can buy two more from us, or you can use the savings to maintain this or several devices for many years. For example, the Fronius TPS 2700, as advertised here, costs around €8,500 new. We offer it for less than 1/3 of the new price. All prices are starting from prices; you can configure the devices with us. ...

Condition: used, Year of construction: 2002, Overview This Alfa Laval VNPX 510 SFD-34C is a self-cleaning disc-stack separator built in 2002 by Alfa Laval (Tumba, Sweden). The VNPX series is an established solids-ejecting clarifier platform for the food and beverage industry; this unit was last operated in a brewery. The separator is currently disassembled: frame, bowl section, drive motor and fittings are stored as individual components, which makes inspection of the main parts straightforward and simplifies transport. The scope of delivery includes the 22 kW ABB drive motor, a stainless steel sludge collection vessel of approx. 150 l and the Siemens SIMATIC C7-633 control system with a separate touch panel and switch cabinet. Technical data - Manufacturer: Alfa Laval (Tumba, Sweden) - Model: VNPX 510 SFD-34C - Year of manufacture: 2002 - Machine type: self-cleaning disc-stack separator (clarifier) - Max. bowl speed: 6,240 rpm - Motor shaft speed: 1,500 rpm, 50 Hz - Recommended motor power: 22 kW - Max. density of feed: 1,100 kg/m³ - Process temperature: -5 to +100 °C Gbsdszpai Ijpfx Al Uou - Control: Siemens SIMATIC C7-633 incl. separate touch panel and switch cabinet Equipment - ABB drive motor, 22 kW (separate) - Stainless steel sludge collection vessel, approx. 150 l - Siemens SIMATIC C7-633 control with touch panel and switch cabinet - Valve and fittings assembly with flow meters and pressure gauge - Operating manual (German) Condition Used. The separator was dismantled for operational reasons and is sold disassembled; the motor is separate. The components were stored outdoors. Availability Immediately. Location: Germany.

Condition: used, mileage: 166,765 km, power: 70 kW (95.17 HP), first registration: 04/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, For sale is a Mercedes-Benz SPRINTER 310 CDI with box body, fitted shelving, and reversing camera. First registered in April 2011, this vehicle has a mileage of 166,765 km. The 2.1-liter diesel engine, in combination with the automatic transmission and rear-wheel drive, complies with the Euro 5 emissions standard and delivers reliable, durable, and powerful performance, making the Sprinter an ideal choice for tradespeople, delivery services, or commercial transport. The spacious box body provides excellent protection for transported goods and offers ample space for parcels, tools, or sensitive materials. The integrated shelving allows for efficient organisation of the cargo area, ensuring all materials and tools are well stored and easily accessible. The reversing camera enables comfortable maneuvering and parking, even in tight yards or busy streets, thus enhancing safety in all driving situations. The Mercedes-Benz SPRINTER stands out due to its robust construction and high-quality engineering, ensuring dependable operation even with intensive daily use. The vehicle is comfortable to drive, extremely versatile, and ideally suited for deliveries, installation work, or general transport tasks. Gsdpoxw In Uefx Al Uebu This SPRINTER is immediately operational and offers a combination of performance, functionality, and comfort that is indispensable for trade and logistics companies. Viewing or test drives are available at any time by appointment, allowing you to experience the reliability, versatility, and practicality of this Mercedes-Benz SPRINTER 310 CDI firsthand. Sale exclusively to commercial customers (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors excepted.

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH CS-1000, a bolted-type cement silo with a capacity of 1000 tons, is an ideal solution for large-scale industrial facilities due to its high durability and long-lasting construction. It is particularly preferred in cement terminals, cement factories, and limestone powder storage facilities. Thanks to its modular design, the CS-1000 offers easy on-site assembly, saving time and money during transportation and installation. The silo is equipped with roof flanges for the maintenance platform, internal and external manholes, safety guards, cement filling pipe, air filter, and pressure relief valve. Furthermore, the conical flange system for butterfly valve connection ensures safe and controlled material discharge. It is delivered fully equipped with equipment such as helical conveyors of the desired diameter and length, air fluidization nozzles, and upper and lower level indicators. The CS-1000, whose all static and mechanical calculations are performed using ANSYS Workbench CAE software, can safely store 1000 tons of cement or similar material without deformation. The laser cutting and drilling technology used in the production process ensures perfect part fit and high assembly accuracy. In addition, the silos are painted with 1 coat of anticorrosive and 2 coats of epoxy paint, totaling 140 microns thick, for long-lasting protection. CS-1000 - 1000-Ton Cement Silo Technical Specifications Silo Capacity: 1,000 tons Silo Height: 20,840 mm Silo Diameter: Ø 8,250 mm Number of Silo Legs: 8 Silo Outlet Diameter: Ø 300 mm Number of Components: 191 Silo Weight: 72,000 kg Silo Leg Material: Ø273 x 10 mm steel pipe Silo Leg Supports: 100 mm C channel Silo Leg Plates: 25-30 mm Conical Part Support Material: 160 mm steel C channel Conical Part Material: ST-37, 10 mm metal plate Silo Body Material: ST-37, 8-6-5 mm metal plate Silo Top Cover Material: ST-37, 5 mm metal plate Charging Pipe: 4" steel pipe Internal Manhole: Available External Manhole: Available Railing on Silo Roof: Available Maintenance Platform: Available Structural Analysis: Performed in accordance with approved projects. Godpfxexpi Nws Al Uebu Why Choose the CS-1000 Cement Silo? CONSTMACH manufactures products to European standards with its engineering expertise and commitment to quality. The CS-1000 model offers years of trouble-free use with its high storage capacity, modular design, and reliability. The availability of spare parts and technical support minimizes your business downtime. By choosing CONSTMACH, you both secure your investment and increase your productivity. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, mileage: 119,281 km, power: 78 kW (106.05 HP), first registration: 10/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 10/2026, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, For sale is an Iveco Daily 35 S11 C30C with automatic transmission, first registered in 10/2012 and a mileage of 119,281 km. The proven 2.3-liter diesel engine (2,287 cc) with Euro 5 emission standard combines reliability, performance and efficiency—ideal for craft trades, assembly, service, or delivery operations. The cargo area is professionally fitted with shelving, allowing tools, spare parts, or materials to be stored clearly and within easy reach. The vehicle is immediately ready for use, with no additional modifications or investments required. This vehicle offers everything needed for a professional workday: reliability, comfort, safety, and optimal organization. Whether for assembly, service, or deliveries—the Iveco Daily 35 S11 C30C is your dependable partner on every route. Gjdpfxsxnrzgj Al Usbu Sale only to commercial customers (farmers, freelancers, small and large businesses) or for export. Subject to prior sale and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 80 t, stroke length: 120 mm, table length: 2,500 mm, throat depth: 250 mm, distance table to ram: 385 mm, clearance between the columns: 2,000 mm, oil tank capacity: 160 l, total length: 2,600 mm, total width: 1,450 mm, total height: 2,300 mm, overall weight: 4,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic CNC Servo Press Brake MTP 80X2500 with MTP-3212 Controller – In Stock The MTP 80X2500 is a hydraulic CNC servo press brake designed for accurate and efficient sheet-metal bending. The machine delivers a pressing force of 80 tonnes and offers a maximum working length of 2,500 mm. It is suitable for processing sheet metal up to 4 mm thick. The machine is equipped with two controlled axes: • X-axis – servo-controlled back-gauge positioning • Y-axis – servo-controlled ram movement The MTP-3212 CNC controller features a large colour touchscreen and a clear, intuitive operating menu. Its software automatically calculates the required bending angle, helping simplify machine setup and improve production efficiency. The controller can store data for up to 40 different punch types. The machine is fitted with an AMADA-style quick-clamping system, enabling fast and convenient tool changes. Two front material supports are included. High-quality components ensure reliable operation and a long service life. The hydraulic system uses a renowned German Rexroth valve, while the electrical system incorporates Schneider components. Safety components are supplied by Omron and Schneider. Steel hydraulic connections help minimize the risk of leakage. For comfortable operation, the press brake is equipped with a mobile control unit and a controller mounted on an adjustable arm. Integrated LED lighting provides excellent visibility throughout the working area. The machine includes extensive safety equipment, such as side guards, a rear safety gate, easily accessible emergency-stop switches and a safety light barrier. The light barrier helps prevent accidental access to the area between the punch and die during operation. An English-language operating manual and a CE declaration of conformity are included. Technical support is also available to assist with tooling selection, material selection, bending sequences and the configuration of suitable operating parameters. Technical specifications: • Pressing force: 80 t • Maximum working length: 2,500 mm • Maximum sheet thickness: 4 mm • Controlled axes: X and Y • Distance between columns: 2,000 mm • Throat depth: 250 mm Gsdpfx Ajzrl Nlsl Uobu • Ram stroke: 120 mm • Maximum opening height: 385 mm • Back-gauge travel: 600 mm • Motor power: 5.5 kW • Overall weight: 4,800 kg • Dimensions (L × W × H): 2,600 × 1,450 × 2,300 mm • Front material supports: 2 • Punch clamping: AMADA-style quick-clamping system • CNC controller: MTP-3212 • Safety light barrier: Yes • CE marking: Yes • Documentation: English-language operating manual The machine is currently in stock and available for prompt dispatch. Delivery can be arranged throughout Europe and to destinations beyond Europe. Transport costs are calculated individually and depend on the delivery destination. Please contact us with your delivery address or postal code to receive a transport quotation.

Condition: used, Year of construction: 1998, Number of spindles in the hole row: 11 Number of horizontal spindles: 3 Pot-band drilling head: yes, Hettich Gbodpjz I Ivdjfx Al Ueu Drill spacing: 32mm Power consumption: 2.2kW Drilling unit: swiveling