Used Surface Sanding Machine for sale (66,033)

Year of construction: 2000, condition: ready for operation (used), Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available. Fgedpfxstk Rwtj Al Ujh

Condition: used, Year of construction: 2014, Surface grinding machine, Geibel + Hotz, type FS 420 SD. Fjdoz Affujpfx Al Uegh

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: V25.032, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Sanding machine Volpato LS-1N1RF1A, year of manufacture 2025, 400 V / 50 Hz, CE version. Standard configuration for sanding from right to left with a solid steel base and feed chain with rough rubber pads. 1 sanding belt unit for flat and shaped parts, tiltable from -45 to +90 degrees, with dust hoods with a diameter of 100 mm and sanding belt oscillation from 0 to 30 mm. 1 special double profiling unit with 2 motors of 1.1 kW (tiltable from 0 to -45 and from 0 to +45 degrees), tool diameter 70 mm, 12,000 rpm, with pneumatic shut-off per motor. 1 sanding disc unit. Control with a 7-inch touchscreen and PLC, 500 storable programs. Options: electronic speed control for the sanding belt unit and for the sanding disc unit, and end sanding wheel with flex-trim, complete with sanding strips. Fodpfx Asz Ngk Rol Usgh

Year of construction: 2013, condition: used, Number of sanding units 4 st. sanding width max. 200 mm Sanding height max. 7-150 mm Working speed 8-16 m/min Band Speed 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----- Manufacturer's Technical Description: Stähle-Hess Finish Sanding Machine, Model Saturn Duo Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. Fjdpfx Aley Spvlo Uegh 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) ----- Price for the above-mentioned machine available upon request! ----- Note: This machine was previously used in conjunction with a Weinig Variomat four-sided planer/moulder (see Stock No. #7007). (Technical specifications provided by the manufacturer – subject to verification!) All listed prices are net, plus applicable statutory VAT.

Condition: good (used), Machine is in good working condition. Fgedpfxez H T Atj Al Ujh Parts shown by hand not come.

Condition: new, Year of construction: 2026, MYS820 200×480 Magnetic Surface Grinder is an advanced machine designed for precision grinding of small and medium-sized metal components. Its compact design and modern technologies ensure high machining accuracy and reliable operation in industrial environments. Main advantages of the MYS820 200×480 magnetic surface grinder The MYS820 200×480 magnetic surface grinder is an ideal solution for industrial facilities requiring precise machining in a compact format. Designed for professional users, it combines advanced technologies such as automatic feed in two axes and precision guideways with a robust construction, ensuring reliability and efficiency. Its compact dimensions (1680 × 1140 × 1800 mm) and weight of 800 kg make it an excellent choice for smaller workshops and production facilities with limited space. Key benefits include: High grinding precision – precision guideways and automatic feeds enable machining accuracy of 0.01 mm in vertical movement, ensuring excellent surface finish quality. Compact working area – a 400 × 200 mm table is ideal for processing small and medium-sized components, increasing application versatility. Smooth automatic feed system – two-axis automatic feed provides precise movements with a maximum longitudinal travel of 530 mm and transverse travel of 220 mm, ensuring efficient machining. Stability and durability – the massive 800 kg construction minimizes vibrations, ensuring stable operation during intensive use. Easy maintenance – centralized lubrication of guideways reduces manual maintenance requirements and extends machine service life. Ready for operation – equipped with digital readout and fully prepared for immediate production, minimizing downtime. Machine design and technology Robust construction and precision components The MYS820 200×480 magnetic surface grinder features a heavy-duty 800 kg structure that provides excellent stability during machining. Hardened and ground linear guideways eliminate vibrations, ensuring smooth table movement and high-quality surface finishing. The spindle, driven by a 1.1 kW motor, operates with a grinding wheel measuring 200 × 19 × 32 mm, allowing efficient processing of various materials. Advanced feed system The machine is equipped with automatic feed in two axes, providing: maximum longitudinal travel: 530 mm maximum transverse travel: 220 mm The precise transverse feed per handwheel rotation is 2.5 mm, while the vertical feed is 1.25 mm, allowing accurate adjustment of machining parameters to specific requirements. Technical specifications Parameter Value Table dimensions 400 × 200 mm Maximum longitudinal travel 530 mm Maximum transverse travel 220 mm Spindle-to-table distance 490 mm Grinding wheel dimensions 200 × 19 × 32 mm Manual transverse feed 2.5 mm/rev Manual vertical feed 1.25 mm/rev Spindle speed 2850 rpm Motor power 1.1 kW Fjdjycr R Sspfx Al Usgh Machine dimensions 1680 × 1140 × 1800 mm Weight 800 kg

Condition: used, Year of construction: 2005, grinding length 5200 mm grinding width 1000 mm workpiece height 320 mm Control Siemens 840D Passage width 1300 mm grinding height 320 mm grinding motor 306 kW grinding motor turning speeds up to 320 U/min grinding motor feed, infinitely variable 0,5-35 m/min grinding motor adjustment in steps 0,002-1 mm grinding motor adjustment, continuously stepless bis/upto 5 mm/min dimensions of the machine ca. 11,21 x 3,2 x 3,85 m CNC production surface grinding machine with segment head Equipment / Accessories: - with segment head, diameter 1400 mm segment head dimensions: 120/106 x 41 x 250 mm number of segments: 1 set = 26 pieces - with electro-magnetic table 5200 x 1300 mm - Marposs measuring control travel (Z1 axis), vertical: 420 mm - coolant flow rate 2000 l/min Fgodpfez Alafox Al Ujh lifting station 2x pump for 1000 l/min

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Fgjdpfsy Ehiwex Al Ush Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2014, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. Fgjdsxrb Rfspfx Al Ueh - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: refurbished (used), Year of construction: 2026, Dear customers, we currently offer you a fully refurbished profile belt grinding machine for model and mold making, manufactured by Zimmermann. Here are the technical specifications of a machine of the PS1 type: Table length: 650 mm Table width: 600 mm Rail width: 15 / 30 / 40 / 50 mm Belt length: 2,700 mm Grinding height: 350 mm Table swivel: 45 / 20° Voltage: 400V Power: 1.4 / 1.85 kW Speed: 1,500 / 3,000 rpm Belt speed: 12 / 25 m/s Dust extraction port diameter: 80 mm Dimensions: 1,200 x 2,450 x 1,500 mm Weight: 320 kg After the overhaul, the machines feature a revised electrical system including a motor brake, are painted in RAL 7035 light gray, have refurbished idler and drive rollers, and come with a complete set of accessories. Fjdszlicvopfx Al Ujgh We look forward to receiving your questions and inquiries.

Condition: new, Year of construction: 2026, functionality: fully functional, Type FNX 640 NC-T, fully enclosed Magnetic clamping plate/grinding area 600 x 400 mm Spindle speed 3000 rpm, drive power 7.5 kW Operating voltage 400 V / 50 Hz Table axis with V-shaped flat guide and toothed belt drive Y/Z axis with linear guides and ball screw drive Table load 300 kg Control: FANUC NC-T with Stöckel touch-screen interface Grinding-related equipment: Folding dresser Grinding mist extraction Strip filter system Options: Fgedpfsz Hyarjx Al Uoh Cycle chaining Profile grinding VPN connection for remote diagnostics/remote maintenance etc. The machine is fully functional and can be inspected at the manufacturer's premises by appointment.

Condition: used, Jung F 50 Surface Grinding Machine Condition: Used Technical Data Grinding Length: 500 mm Grinding Width: 200 mm Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Fedpfoyuy Eujx Al Uogh Weight: approx. 1400 kg

Condition: used, Year of construction: 2019, Ziersch Z 715 - Surface Grinding Machine - Mitsubishi Electric GOT2000 CNC control - Operator panel with handwheel - Includes technical documentation and operating manual - Spindle operating time approx. 1970 hours - Year of manufacture: 2019 Technical data - Max. grinding area: 1500 x 800 mm - Cross travel: 750 mm Fedjz Iqv Topfx Al Ujgh - Longitudinal travel: 1900 mm - Distance table to spindle center: 600 mm - Table load including magnet: 1600 kg - Feed rate - Longitudinal axis: 1000 - 30000 mm/min - Feed rate - Cross axis: 0.01 - 2000 mm/min - Feed rate - Vertical axis: 0.001 - 1500 mm/min - Grinding wheel: 400 x 80 x 127 mm - Power of grinding spindle motor: 11 kW - Speed range: 900 - 2600 rpm - Max. cutting speeds of the grinding wheel: depending on the model, 35 or 50 m/s - Oil volume: 300 l - Noise emission: < 70 dBA - Connection voltage: 400 V / 50 Hz - Rated power: 27 kW - Fuse rating: 50 A - Space requirement W x D: 5727 x 3578 mm - Machine weight: approx. 9300 kg

Condition: like new (used), Year of construction: 2009, grinding length: 1,300 mm, grinding width: 650 mm, workpiece weight (max.): 1,200 kg, grinding wheel diameter: 400 mm, table load: 1,200 kg, grinding wheel width: 100 mm, spindle speed (min.): 1,450 rpm, overall weight: 6,000 kg, grinding spindle motor power: 11 W, travel distance X-axis: 1,300 mm, travel distance Y-axis: 550 mm, rotational speed (max.): 1,450 rpm, Equipment: documentation/manual, DELTA MODEL MINI 12 SURFACE GRINDER MAXIMUM GRINDABLE SURFACE AREA 1300x650 ELECTROMAGNETIC CHUCK 1200x500 GRINDING WHEEL DIMENSIONS 400x50x127 AUTOMATIC DRESSING ON HEAD / TABLE TANK WITH PAPER FILTRATION MANUALS Fgodpfx Aszy Ewrjl Uoh YEAR OF MANUFACTURE 2009

Condition: good (used), Grinding range 800x500x480mm Table size 800x400mm Wheel diameter 400mm Magnetic plate 800x400mm Fgedsd Nmx Nepfx Al Ueh MARCELS MASCHINEN CH

Condition: used, Year of construction: 2001, grinding length 600 mm grinding width 400 mm workpiece height 350 mm table-size 820 x 350 mm dist. center of grinding spindle - table 140-525 mm table movement 660 mm Fgodpfx Aljzi Ey Se Ujh workpiece weight max. 400 kg diameter / bore of grinding wheel 350 x 50 x 76,2 mm table speeds 2-28 m/min power capacity - grinding motor 3,7 kW total power requirement 8 kW weight of the machine ca. 2100 kg dimensions of the machine ca. 4,5 x 3 x 2,4 m Geipel & Hotz FS 60 AC surface grinder, built in 2001, in good condition

Condition: excellent (used), CATALOGUE NUMBER 7606 Technical data: - shaft width 500mm - number of knives 3 pcs - shaft guard - table length 2530mm - cast iron tables - both tables adjustable - original cast iron guide, adjustable to an angle - motor 3kW - dimensions (L/W/H) 2530x1000x1100mm - weight 920kg ADVANTAGES - made in Italy - 3-knife shaft - used thickness planer Fgsdozxx Eaepfx Al Ueh - very good condition Net price: 8900 PLN Net price: 2070 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: used, 3-D coordinate measuring machine ZEISS NUMEREX - non-functional Granite measuring table, granite measuring plate, measuring table Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Measuring probe mount Ø 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz - Granite plate with steel inserts with internal thread - Axis adjustment with pneumatic sliding guide for X, Y and Z axis - Plate on substructure with 5 adjustable feet, 3 support plates for the adjustable feet Fsdpfxsfy U Ews Al Uogh - Computer and software missing (not included and not part of the scope of delivery) → non-functional! Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 tons Plate damaged on one side, see picture, otherwise in good condition.

Condition: new, Year of construction: 2022, Motor 2.2 kW (3 hp), Sanding belt 2280 x 150 mm, Swiveling edge sanding unit, Motorized belt oscillation, Support table at the idler pulley, Pneumatic belt tensioning, Table size 700 x 350 mm, Working surface 1000 x 150 mm, Belt speed 22 m/s, Roller diameter 140 / 80 mm, Dust extraction port D = 100 mm Ex works, from stock in Seevetal, subject to prior sale. Fgodpfx Aljffyc No Ujh

Condition: good (used), - All rubber rollers new or as good as new - Belt length 3000 mm Fgjdpfxjulvlke Al Uoh - Year of manufacture - Price On request

Condition: used, Year of construction: 1990, grinding length 900 mm grinding width 510 mm workpiece height 400 mm table surface area 800 x 400 mm longitudinal feed of the table max. 980 mm table speed -stepless- 1 - 35 m/min grinding wheel size 355 x 51 x 127 mm cross feed of the table 460 mm cross feed 1 - 40 mm/Hub vertical feed autom. 0,005 - 0,04 mm/Hub rapid traverse vertical 0,5 m/min grinding spindle speed 1450 U/min grinding spindle drive 5,6 kW table load capacity max. 1000 kg dimensions of machine L x W x H 3,2 x 2,17 x 2,47 m total power requirement 10 kW Fsdpfetqqm Aox Al Ujgh weight of the machine ca. 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filter

Condition: used, Year of construction: 2001, Technical details: grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m Fsdpevbgr Rjfx Al Usgh The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *

Condition: used, Year of construction: 1962, We are offering this used Comag AF5 S 128 surface planer, serial number 641137, manufactured in 1962. Fgedpjz Afbvsfx Al Ujh Manufacturer: Comag Model: AF5 S 128 Year of manufacture: 1962 Condition: used Type: 641137 The advertised price is 2,200 euros net (negotiable). If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. Fedpewyda Uefx Al Uegh • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: excellent (used), Year of construction: 1996, grinding length 600 mm grinding width 350 mm total power requirement 7,5 kW Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : GEIBEL & HOTZ CNC horizontal surface & profile grinding machine model FS 635 - Z CNC year 1996 Grinding length max. (table movement 660 mm) 600 mm Grinding width max. (cross movement 360 mm) 350 mm Mounting height under new grinding wheel 375 mm Distance table – center of spindle min / max 140 – 525 mm Standard size of magnetic plate 600 x 350 mm Table size 820 x 350 mm Max. table load 400 kg Table speed 5 – 35.000 mm/min Cross movement, intermittently 3 – 40 mm Cross-/Vertical quick feed 5 m/min Grinding wheel measurements 300 x 50 x 76,2 mm Grinding spindle speeds, variable 1.000 – 3.000 rpm Grinding spindle-drive approx. 7,5 kW Total electrical load approx. 15 kW - 400 V - 50 Hz Weight approx. 2.600 kg Accessories / Special Features: • SIEMENS CNC control model 840 D with comprehensivel GEIBEL&HOTZ grinding software. User friendly interface, supported by dialog and graphics, simple programming also of complex grinding wheel profiling and easy linking of grinding cycles. Fodpfsx Haryox Al Ujgh • All standard grinding-programms and cycles as surface and multiple surfaces grinding with roughing-finishing-sparkout- return, plunge in grinding, automatic dressing cycle with compensation, etc. • electronic handwheel for 3 axis; cross feed (Z) and infeed (Y) effected by ball screw drive. • Table movement is actuated by belt drive (Z), which allows both very high and very low table speeds and is also ideal for profile grinding. • Hydraulically upwarding diamond dressing device mounted on the left side of the table (also for profile dressing); additional fixed dresser with automatic dressing cycle, including compensation. • Mounted sinus tilting magnetic plate 600 x 200 mm, fine pole division. • Separate paper band coolant filtration unit, separate switch cabinet, lamp for working area, various accessories, manuals, etc. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of surface grinders – CNC or conventional - available. Please let us know your requirements.