Used Swing Cut Scissors for sale (20,300)

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,340 mm, total length: 2,600 mm, total width: 2,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 3,300 kg, warranty duration: 6 months, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Nledpfoxwktmex Agzsk Maximum taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Manual tank door (accessible from one side) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of the complete unit: 2600 x 2600 x 2340 mm Total weight of the unit: 3,300 kg The machine will be cleaned, fully overhauled, and functionally tested by us after the order is received. You will receive a 6-month warranty on the machine. We are happy to offer you commissioning of the machine.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, Cut-to-length line Technical Data Manufacture REDMAN Year of Manufacturing 1972 Strip width Max. 2000 mm Min 600mm (both Mandrels) Min 150mm (single Mandrel) Strip thickness 6-13 mm Coil weight Max. 20 t Coil- Max. 2150 mm Min 1000 mm Speed 10-20 m/min Working Direction right  left The line consists of: • De coiler Double expanding mandrels Coil bore range-Ø 460 – 760 mm Drive / braking D.C. motor – Gearbox /Pneumatic Disc brake Coil lift Hydraulic • Coil opener / pinch roll unit Telescopic table Hydraulic No. of pinch rolls 2 sets Pinch roll-Ø 330 mm • Leveler no. of levelling rolls 9 -1 Exit roll Levelling roll-Ø 140 mm Height adjustment leveling rolls Hydraulic Main drive D.C. Motor Driving power 120Hp Njdpfx Aovun S Ejgzolk • length measuring • cut-to-length shear Start-Stop Type Actuation • stacker: Maximum 12.000 mm Run out table • Hydraulics - Electrics

Condition: excellent (used), Year of construction: 2015, operating hours: 5,090 h, functionality: fully functional, machine/vehicle number: T0298, workpiece weight (max.): 850 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 245 mm, workpiece length (max.): 670 mm, type of input current: three-phase, table width: 960 mm, input frequency: 50 Hz, Equipment: cooling unit, The Sodick VZ500L is a wire-cut EDM (Electrical Discharge Machining) machine from Sodick, designed for electro-erosive machining of metals. This is a wire-type machine equipped with linear drives, enabling precise cutting of intricate shapes at an angle based on CAD files (e.g., DXF, STEP, IGES). Main features: Type: Wire-cut EDM Manufacturer: Sodick Model: VZ500L Drives: Linear Working range (X x Y x Z): 500mm 350mm 250mm Maximum workpiece dimensions: 960mm 670mm 245mm Maximum workpiece weight: 850 kg Nedpfx Agex Ekcyozslk Capabilities: Angular wire cutting (based on 3D models) Additional features: Automatic wire feeding (AWF) Immersion in dielectric fluid

Condition: new, Year of construction: 2019, functionality: fully functional, I am offering a new, originally packaged saw for sale. Nsdpfx Agswxr Dxozolk

Year of construction: 1990, condition: excellent (used), Double cut-off saw STRIFFLER Cutting length 2,2 m Nlodpsibyknsfx Agzjk

Condition: new, power: 270 kW (367.10 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab * Mechanical cab suspension * Passenger seat: cinema style with fabric upholstery * Adaptive cruise control with FCW and AEBS-3 * Lane departure warning system * Goodyear * Emissions standard Euro 6 * Automated gearbox, TraXon, 12 speeds * Standard component arrangement * Fuel tank on the left * PACCAR Connect Nsdpfjr Sn Nnjx Agzjlk * Plus Driveline Warranty - 3 years/500,000 km Options * LED headlights with cornering and fog lights * Windscreen with sun protection film * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler for Day Cab * Black mirror housings * Roof spoiler in cab color * Headlight bezel color: cab color * Bumper color: cab color * Steering wheel with silver accents * Door trim: loosely woven fabric * Driver's seat: Luxury Air * Armrest for driver's seat * Dashboard table * Cool box or refrigerator * Automatic cab climate control * Auxiliary heater with heat pump and timer * Roof hatch with electric control * ECAS remote control with extended functions * Toll system preparation * Digital tachograph, VDO 1C, version G2V2 * Cruise control setting: 90 km/h * DAF Infotainment Luxury Plus, luxury speakers * Wireless charger * Reversing warning system * Front axle: 8.00 t, air suspension, 161 N * Front air suspension: medium * F1, 315/70R22.5 GO KMAX S2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAX D2 154/150 L Traction CBA * MX-11 engine, 270 kW / 367 hp cab emblem: 370 * 12-speed TraXon gearbox 12TX2010 DD, 16.69-1.00 * Rear axle ratio 2.47 * Mechanical differential lock * MX engine brake * Parking brake assist * Wheelbase 5.10 m / rear overhang 2.75 m * Longitudinal frame 260/7.0 mm, continuous internal reinforcement * Use with drawbar, type plate, up to max. gross combination weight * Cross member D137 + Rockinger coupling D130 * Pneumatic connection for trailer, rotary coupling * Electrical connection for trailer, 24 V/15-pin * Tail lift application Day registration from 03.12.2025 Superstructure: ZIKUN Swing-Board I body Through-loading length: 6,650 mm Loading length: 6,800 mm Clear portal: 2,480 mm Internal loading width: 2,480 mm External width: 2,550 mm Internal through-loading height: 2,100 mm Loading height: approx. 1,177 mm Overall height unladen: approx. 3,479 mm Subframe: robust lightweight construction made of pressed steel sheets Bulkhead: made of special automotive-grade plastic panels, closed up to the roof, with a central strut, flush fitted Side walls: ZIKUN folding swing mechanism Roof: fixed roof consisting of steel spars with permanently bonded aluminum sheets, powder-coated in RAL 9010 pure white Bumper protection: welded steel anti-collision strips on both sides as bumpers PVC mudguards on the rear axle 1 set of mudflaps for same Holder for wheel chock + 2 chocks Red position lights above the tailgate Side contour markings in white, rear in red Anti-spray mats in the rear mudguards Painting: The entire bodywork is sandblasted, primed and painted in a single color or powder-coated. Subframe and body: DAF W9815WHTE Integrated load securing with CRS system (4 rows) in roof and floor, incl. 4 locking bars with 6 horizontal spring-loaded telescopic rods (CRS system by Ancra-Jungfalk, Dekra certified according to VDI 2700 Code XL) Sliding step on each side, 2 sliding steps in the lower section of the folding wall left and right, approx. 600 mm long Pallet stop edge left and right Interior lighting as LED spotlight mounted at rear at the top, with cab switch

Condition: good (used), Code: 0236 Brand: FOM INDUSTRIE Model: BLITZ ALVA 450 - CE Standard Double-head electropneumatic sawing machine for cutting and machining aluminium profiles, plastic, light alloys, pvc - CE Standard Useful cutting length mm 4000 Vidia blade diameter mm 450 F32 Three-phase motors Hp 3 - Revolutions/min 2800 Head inclination: 90 degrees - 45 degrees external - 22,5 degrees external - Intermediate graduation with mechanical stop and reading on graduated vernier scale First head fixed Second head mobile: automatic positioning with manual option - Automatic head positioning speed 12 mt/min Movable head positioning accuracy: +/- 0,1 mm Minimum cutting capacity between the two heads: 300 mm Nlodpfx Aoxv Dfaegzsk Maximum cutting capacity between the two heads: 4000 mm Hydropneumatic blade feed (adjustable output speed - rapid retraction) Vertical and horizontal pneumatic clamps Spray lubrication of the cut Mobile head roller conveyor 3 mt Operating pressure 7 bar Suction mouth diameter mm 100 Overall dimensions mm 5760 x 1600 x 1950 h Weight kg 1550

Condition: ready for operation (used), DESCRIPTION CHARACTERISTICS MATERIAL Coils DCP & GALVANIZE THICKNESS 0,3-2,5 mm ( For 1500 mm width max to 1,5 mm) WIDTH COIL 300-1550 mm RANGE OF LENGTH 400-12.000 mm MAX WEIGHT OF COIL PROCESSING 16 Tn Nedpfx Agevupgwszjlk INTERNAL DIAMETER COIL 440-640mm AND 700-800mm REEL CHUCK TYPE LENGTH TOLERANCE -1 / +1 mm (ή 0+2mm) DIAGONAL TOLERANCE 0 + 1mm

Condition: like new (used), As-new Twin band saw Braun Canali ML 1250 TWIN For sale by customer order Nljdpfxjxz R Uxs Agzok

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Very well-maintained compact drying chamber MÜHLBÖCK type QLSF-2x1.2-3x1.2-13 / year of manufacture 2004. Complete system including control unit. Heat requirement: 330 kW. The unit is still in operation! Full transport by truck is possible. Only the counterweight needs to be dismantled. The matching heating system can also be supplied upon request. Dismantling/transport by the buyer is possible. Construction dimensions can be found in the attached drawing. Nledpfx Agjxt Hwaszek

Condition: good (used), Year of construction: 1999, machine/vehicle number: 89257, GreCon Dimter Opticut 704 L saw from 1999. Machine dismantled from a functioning production line. Nsdpfx Agotvahlszelk No output ejectors; the machine requires reintegration or retrofitting. Available for inspection at our premises.

Condition: new, Hiwell cut-28 2020 Brand new 2020 model Hiwell portioning machine, contact us for a demo. For years Hiwell has been developing a portion-cutter with the Cut-28II as a result. Very accurate fixed weight or fixed size portion cutting with the accuracy and consistency of it’s European rivals. This machine is capable of portioning meat, fish and poultry up to a thickness of 50mm and 240mm wide. With a portioning accuracy range higher than ᐳ98%, capable of making 1000 cuts per minute. Comes with a strong modular belt that will last long. Controlled by SIEMENS electrical parts, with CE approved safety protection. HACCP standard easy operation, low maintenance cost. General information Model CUT28-IV Belt width 254mm Belt speed 5~20m/min Weight error ≤2% Cutting speed 1000 cuts/min Max. product height 50mm Nledpfxofg U Hfo Agzok Max. product length 650mm Max. product width 240mm Input/Output height 1050±50mm Power 7.55kW Overall dimension 2512×1200×1680mm

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, type of cooling: air, welding current (min.): 30 A, welding current (max.): 60 A, Note: This is a Trade-in For sale Schweißring Plasmacut 65P 30-60 AMP 400 Volt Refurbished, serviced, and tested Including Plasma torch, earth work cable with clampo, and air hose. Visits by appointment only. Nedpfx Agoxr U Rlozelk Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 5,750 mm, cutting height (max.): 120 mm, cutting width (max.): 2,600 mm, main saw diameter: 460 mm, power: 27 kW (36.71 HP), Machine type: fh6 580 HT260 ERB-L / MCS-Evolution / Win 10 Cutting length: 5.750 mm Cutting width: 2.600 mm Year of construction: 2007 Saw blade projection max .: 135 mm Saw blade diameter max .: 460 mm Main saw motor: 27 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 120 mm Package height min .: 3 mm Saw aggregate forward: 6 up to 150 m / min Saw aggregate backward: up to 150 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 8 pcs grip push clamp Clamp opening: 125 mm Nsdpfsvx Ru Dox Agzelk Lifting / lowering device for clamps Strip aligner before and after the pressure beam Air cushion tables: 1 pcs. (2100 x 700 mm) Turn table: 1 pcs. (5800 x 2200 mm) 90° turnable Machine table: heavy-duty steel construction „Closed Frame Construction“ machine table surface is precision machined Machine table lips Automatic cutting length adjustment Lift table, max. panel width: 2600 mm Feeding roller conveyor: 7100 x 2600 mm Recesses for forklift trucks: 2 pcs Frequency converter for feeding roller conveyor Positioning stop: 2 pcs Push-off trolley Push-off device: 3 pcs Book aligning device for longitudinal board edges: 3 pcs Retaining device: 3 pcs Roller table Cross alignment stop at the roller table This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: excellent (used), Max cutting width: 560 mm Max cutting height: 100 mm Motor: 7.5 kW Year of manufacture: 2007 Blade diameter: 700 mm (max 750 mm) Two-hand control Pneumatic clamp Nledpsxz Up Hefx Agzok

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 5 mm to 300 mm Minimum workpiece length: 250 mm Units: 2 Njdpfoupy Spox Agzjlk 1. Saw cutting unit Random System: Saw cut appearance 2. Brush: Tynex, diameter 210 mm Height adjustment: electric Height display: digital Feed speed: 4 - 14 m/min Motor power saw unit: 1.1 kW Motor power brush: 4 kW Motor power feed: 0.37 kW Machine length: 1400 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 700 kg

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Nedpfx Aexx Hwwjgzolk Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Engine size : 1,8 Kw Digital display with touch screen Hand held barcode scanner 4000 mm infeed with digital pusher 4000 mm manual outfeed with rollers

Year of construction: 2012, condition: used, We offer a Drobtech industrial poultry cut machine from 2012, designed for automatic portioning of chicken and other poultry parts. The machine is ideal for slaughterhouses, cutting plants and factories producing breaded and frozen products, ensuring consistent portion weights, high efficiency and reduced raw material waste. The cutter streamlines the cutting process, reduces labour intensity and improves the ergonomics of the production line. The device has a compact but long working line of 6.5 m. The machine complies with the hygiene requirements of the food industry. Technical data: Manufacturer: Drobtech Type: DD-P/6 Machine type: divider / poultry portioning line Year of manufacture: 2012 Nodsx Aqp Sspfx Agzslk No.: 03/01/03/12 Installed power: 1.1 kW Weight: 245 kg Dimensions: 6500 x 1350 x 2100 mm The Drobtech DD-P/6 poultry cutting machine is an excellent solution for plants that want to automate portioning, increase production efficiency and achieve uniform quality of finished poultry products at low operating costs.

Condition: ready for operation (used), De uitrusting bestaat uit: 1 - decoilertoren met 4 decoilers (AG 3000 a) capaciteit per decoiler: 3 ton armlengte: 1350 mm maximale snelheid: 25 m/min frequentiegestuurd 2 - spoelselector (MT-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 3 - richtunit (RM-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 4 - snij-eenheid (TS 1250 + KST-2) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd Nljdpfx Agsxqh Sajzjk 5 - Schechtl-schaar voor op maat knippen met Siemens Touch CNC-besturing 1250 x 2 mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 260105, saw blade diameter: 800 mm, overall weight: 2,960 kg, table length: 700 mm, Equipment: CE marking, TECHNICAL DETAILS Min. saw blade diameter: 790 mm Max. saw blade diameter: 800 mm Spindle saw blade diameter: 40 mm Infeed table length: 700 mm Outfeed table length: 700 mm MACHINE DETAILS Main motor power: 15.0 kW Dimensions & Weight Nsdsxq Au Aepfx Agzolk Dimensions (L x W x H): 3,600 x 2,550 x 2,100 mm Weight: 2,960 kg EQUIPMENT CE marking

Condition: used, Year of construction: 1999, cutting width 150 mm Nodpsva Nqgefx Agzolk machine weight ab. 300 kg 27468

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance Y-axis: 6,000 mm, equipped with 2 decoilers and a 6-meter outfeed table Nedpoxy Rpgofx Agzolk

Condition: new, Year of construction: 2019, functionality: fully functional, cutting height (max.): 200 mm, overall weight: 350 kg, saw blade diameter: 565 mm, main saw diameter: 565 mm, hole diameter of the disc: 30 mm, type of input current: three-phase, We are offering for sale a radial saw in as-new condition, suitable for precise sizing and angle cutting of large cross-section timber. Includes an additional roller material feed table. VAT invoice available for companies. Viewing is possible on working days by prior arrangement in Derecske. We can assist with loading. Nodpox A Euvsfx Agzolk

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The Forstner nuSLIT Series makes all your dreams come true, in a modern sheet metal workshop and takes your production to a new level consider flexibility and productivity. With nuSLIT every function can be operated from the touch panel: coil width, finished lengths, straightening pressure to avoid stop marks, the width settings and operation of the slitting knives. nuSLIT can be integrated in a programmed production flow. The control system is totally compatible with nuIT, allowing you to plan and program your entire production from your office desk with no manual intervention. Combine with the number of decoilers you want and a manual or powered coil selector. There isn’t a better slitting and cut-to-length machine on the market! Nlodpewy Hxaofx Agzjk The most important advantages: Alternating knife arrangement Unbeatable slitting precision Innovative clamping system Control system can be integrated with nuIT Fastest knife change on the market

Condition: used, Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device Nodpoit Ev Tsfx Agzslk simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++