Used Switzerland for sale (270)

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Rsdpfx Ajx N Atfog Isp

Year of construction: 2026, condition: new, Stable heating and / or hay drying and hay drying installations and drying cabins assembly in containers plug and play (Directly deployable also rental) installation in container (s) or on location Switzerland and Austria or southern Germany. Power from 80kW to 500kW and on request >500kW. Rsdpfx Agskytn Hs Ijp Warm air heaters in stock, new and used!

Condition: refurbished (used), Year of construction: 2010, operating hours: 9,563 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,100 mm, total width: 2,800 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 4,440 kg, table length: 950 mm, GF CUT30P - 2010. Available for inspection at our premises in Semsales (Switzerland). Viewing by appointment. More information upon request. Rsdpfoyazkcsx Ag Iep

Condition: new, machine/vehicle number: e763c8c2bb3370bd2342236a4, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gearbox support foot at the front 2 wheel chocks with holder Steel underride guard Lockable storage space for access ramps underneath the loading area Towing device central axle trailer Drawbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brake Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires Redpfxsi Rizbs Ag Iep 235 / 75 R 17,5 at the manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir without ABS, but with mechanical ALB, then max. 60 km/h approval 2 swap-proof coupling heads at the front, with connecting lines to the motor vehicle, electrics 12 volt, multi-chamber lights, without amber LED lighting at the sides, reflectors at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 7-pin 12 volt plug at the front, with connecting cable, extended by approx. 60 cm Hydraulics Three-sided tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this can be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoted with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion, for max. 60 km/h approval, towing vehicle LoF, (max. 40 km/h possible in Switzerland) Prepared for single-line license plate holder without contour marking / reflective strips according to ECE R 048, Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 3002 carmine red Please note! If the bridge is galvanized, it will not be painted! Note! Bridge only primed inside! Wide tires also possible for an extra charge. 355 / 60 R 18, then loading height approx. 980 mm Attention: Archive pictures!

Condition: new, machine/vehicle number: b50cac2c60a813b0968994fa0, empty load weight: 5,700 kg, maximum load weight: 18,300 kg, overall weight: 24,000 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis low loader trailer Welded steel construction Turntable with powerful ball bearing slewing ring Folding rear support 2 wheel chocks with holder Rear spray flaps across the entire width Preparation for widening to 3,000 mm (holes in the outer frame and not in the rear slope) Low loader lashing eyes 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 7 pairs of lashing points at the top and sides of the outer frame, 10 tons each 1 x front on offset 5 x in the drop deck 1 x in the rear slope 12 pairs of lashing holes in the outer frame, each with 5 to. (lashing strap attachment) 5 x crank, 6 x low bed and 1 x in rear slope Trailer drawbar Turntable Redpfxei Ri Agj Ag Ijp Drawbar with tested 40 mm drawbar eye Axles + suspension Drum brake axles, at the manufacturer's choice Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5 Fulda Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable clutch heads at the front, with connecting lines to the motor vehicle, Connecting lines extended by approx. 60 cm without ABS, but with mechanical ALB, then max. 60 km/h approval Electrical system 12 volt, multi-chamber lights, without amber LED lighting at the sides, reflectors at the sides 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 7-pin 12 volt plug at the front, with connecting cable, extended by approx. 60 cm 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, illuminated and extendable to 3,000 mm, floor Front offset with steel/ checker plate covering Storage box recessed in drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 5900 mm Drive-on ramps Steel ramps 2 800 mm long, 750 mm wide, can be moved sideways covered with wood with spring lift support Operating instructions With an axle load of 10,000 kg, a special permit is required, only indivisible loads possible!!! The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion, for max. 60 km/h registration, towing vehicle LoF, (max. 40 km/h possible in Switzerland) Prepared for two-line license plate holder without contour marking / reflective strips according to ECE R 048, Paint finish Frame DB 7350 nova gray 10-year warranty against rusting through Drawbar Galvanized or black, manufacturer's choice Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: good (used), Year of construction: 2011, Machine is in very good working condition. Rjdox I Rkpopfx Ag Ijp Descriptionis and technical details are on photos.

Condition: good (used), Machine is in good working condition. Redpfxjx I Rdpe Ag Iop

Condition: good (used), Year of construction: 2005, Machine is in good working condition. Rsdpfxjx I Nrfj Ag Iep

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights Redpfex Tdyzex Ag Iop • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, fuel type: diesel, color: yellow, power: 30 kW (40.79 HP), output current: 54 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 30 kW (40.79 HP), nominal power (apparent): 38 kVA, continuous power: 30 kW (40.79 HP), continuous power (apparent): 38 kVA, total length: 2,110 mm, total width: 1,000 mm, total height: 1,350 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei STAGEV, type of cooling: water, HELVETICA POWER offers: 30 KW 38 KVA Generator / Diesel Generator ⭐️ Stage V (EU) / Euro 5 compliant – suitable and approved according to current European emission standards. ⭐️ Oil-tight chassis, ideal for construction sites, industry, agriculture, and many other applications. ⭐️ CE-compliant in accordance with applicable regulations ⭐️ Sound-insulated (Super Silent) design ⭐️ Equipped with emergency power switch / ATS (Automatic Transfer Switch) unit for backup power operation ⭐️ Digital control panel plus integrated remote control ⭐️ Yunnei Stage V diesel engine designed for continuous operation ⭐️ Stamford type (licensed CN): CE-certified high-quality brushless synchronous alternator with 100% copper winding ⭐️ AVR system (automatic voltage regulation dependent on load) ⭐️ The generator is delivered with a practical, heavy-duty yellow tarpaulin truck cover Warranty / Guarantee / Service ⭐️ One-year factory warranty! ⭐️ Optional: up to 2-year extended warranty, significantly exceeding industry standards (extendable upon request). ⭐️ Our insurance partner: Allianz Suisse / Allianz Germany (for Europe) ⭐️ Service available throughout Switzerland and Europe. Payment / Delivery ⭐️ Payment: due at purchase. ⭐️ Delivery available throughout mainland Europe for an additional charge. 🚚 Pickup: from our warehouses in Kefikon (TG, Switzerland) or Konstanz (Germany) 🚚 Worldwide delivery upon request 👍 Dealer inquiries welcome – contact us! ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Rodswbkkpopfx Ag Iep More Models & Configurations ⭐️ Other power ratings available (approx. 7 kW to 100 kW) ⭐️ Stage V (EU) / Euro 5 compliant versions ⭐️ Alternative engine options available (e.g. Cummins, Deutz, Volvo) ⭐️ Optional features: larger tank, auxiliary tank, tank and water heating ⭐️ Many versions available from stock in CH / DE. ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Keywords: power generator, generator, emergency generator, backup generator, power unit, energy generator, power supply unit, standby power unit, emergency power supply, NEA, backup power, replacement power, backup power supply, power supply, power source, autonomous power supply, off-grid operation, site power, construction site generator, event power, camping power, outdoor power supply, diesel generator, petrol generator, gas generator, inverter generator, synchronous generator, asynchronous generator, three-phase generator, single-phase generator, 230V generator, 400V generator, high-voltage generator, small generator, industrial generator, professional generator, high-performance generator, silent generator, super silent generator, sound-insulated generator, mobile generator, portable generator, stationary generator, home backup power, commercial power, industrial power, agricultural generator, construction equipment, workshop power, server backup, PV backup, hybrid generator, ATS, automatic transfer switch, power distributor, CEE generator, high-voltage connection, generator with AVR, voltage regulator, power maker, power device, backup power device, diesel power unit, construction site power unit, 22KW 28KVA 30KW 38KVA 34KW 43KVA 44KW 55KVA 19KVA 15KW 38KVA 30KW 63KVA 50KW 125KVA 100KW 100KVA 80KW

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,550 kg, fuel type: diesel, color: yellow, power: 80 kW (108.77 HP), output current: 144 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 80 kW (108.77 HP), nominal power (apparent): 100 kVA, continuous power: 80 kW (108.77 HP), continuous power (apparent): 100 kVA, total length: 2,900 mm, total width: 1,150 mm, total height: 1,600 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yunnei EURO 5, type of cooling: water, HELVETICA POWER offers: 100 KVA generator with 100% copper alternator, digital control, and ATS unit for emergency power operation. Remote control is built-in. CE-certified Yunnei Stage V diesel engine suitable and approved for continuous operation in accordance with applicable emissions standards. Stamford type: CE-certified quality brushless synchronous alternator with 100% copper winding! Delivery (surcharge) possible worldwide. Optional: Looking for something else? More or less kW, a different engine (Cummins, Deutz, Volvo, etc.), a larger tank, an additional tank - contact us. We can also customize your generator. Redpsmw Unkofx Ag Ijp Pickup: from our warehouse in Konstanz (Germany) or Kefikon (Thurgau). Delivery is available. Worldwide delivery is possible. Dealer inquiries welcome - please contact us. We have various emergency power generators (from 7 kW to 100 kW) available from stock in Switzerland and Germany. We also have various power generators with STAGEV engines in various sizes available from stock in Switzerland and Germany.

Condition: new, Year of construction: 2024, functionality: fully functional, type of cooling: air, total width: 540 mm, total length: 920 mm, total height: 760 mm, overall weight: 159 kg, continuous power (apparent): 9 kVA, continuous power: 7 kW (9.52 HP), rotational speed (max.): 1,500 rpm, power: 8 kW (10.88 HP), nominal power: 7.7 kW (10.47 HP), nominal power (apparent): 9 kVA, fuel type: diesel, color: yellow, output voltage: 400 V, output current: 13 A, output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Ricardo (Kofo Serie), Electric starter generator. The generator is available from stock in Kefikon (Switzerland) and Konstanz (Germany). Other models in various sizes (10 kW, 15 kW, 20 kW, and up to 100 kW) are available from stock, including those with STAGEV engines. Service available in Switzerland and throughout Europe. Rodpfemu N Tksx Ag Ijp Pickup. Delivery worldwide possible. Dealer inquiries welcome – contact us!

Condition: good (used), Year of construction: 1999, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 650341, Year 1999 with Fanuc 18 TB – 3 axes XZB Marposs E30/E20 Country of manufacture: Switzerland Voltage: 400V/50Hz/3ph Dimensions: 410 x 220 x 190 cm Net machine weight: 5,000 kg TECHNICAL SPECIFICATIONS CNC control: Fanuc 18TB Intermediate Section Fixed intermediate section: grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Rjdpfx Agsw T Tb Hs Isp Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1'': R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° to (+100°) Spindle speed (continuous): 6 – 600 rpm Internal taper: MT5 Reducing sleeve: MT5/MT4 Short external taper fitting: DIN 55026 / Size 5 Permissible torque: 160 Nm Guaranteed roundness for chuck work Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper fitting: MT4 Quill stroke: 50 mm / 2° Option: fine adjustment with correction (Ø +/- 150 µm) Grinding wheel data (max. speed) Diameter 300: 27 m/s Diameter 400: 35 m/s Diameter 500: 45 m/s UR Grinding Head Power: 9.2 kW / 12.5 HP Wheel mounting, left max.: Ø 500 x 80 mm Right, additional max.: Ø 400 x 63 mm Internal grinding device: spindle HJN 828 Lower table (Z axis) Distance between centers: 1000 mm Max. travel: 1150 mm Max. speed: 15 m/min Max. resolution: 0.1 µm Upper table Distance between centers: 1000 mm / swivel 0° to 9° Grinding carriage (X axis) Max. travel: 320 mm Max. speed: 7.5 m/min Max. resolution: 0.1 µm Pneumatics Min. connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max. connection pressure: 3 bar Required space (version 1000): 3600 x 2000 mm Unless otherwise stated, technical data is provided without engagement and may be subject to errors or omissions.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Rjdpfx Asw T Tcwog Iop Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Rodpfxjw T Tlrs Ag Isp Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm All technical details are given without obligation and subject to errors or omissions.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 6360.16.65, Country of manufacture: Switzerland Voltage: 380/400/50/3 Net weight: 1350 kg Customs tariff number: 8460.1920 Redpfx Aow Ucxqeg Isp Dimensions: 200/120/160 cm TECHNICAL SPECIFICATIONS Maximum saddle travel: 530 x 220 mm Maximum grinding surface: 520 x 230 mm Table clamping surface: 600 x 200 mm Table speeds Longitudinal, standard operation: 0-25 m/min With slow feed: 5/10 mm - 8 m/min Cross feed: 0-6 m/min Vertical travel by hand: 330 mm Rapid travel by motor: 290 mm Rapid feed rate: 460 mm/min Max. distance between table and spindle axis: 412 mm Vertical feed movement Handwheel, 1 division: 0.01 mm Micrometric device, 1 division: 0.001 mm Automatic: 0.001-0.099 mm With pulse button: 0.001 mm Cross feed movement Handwheel, 1 division: 0.01 mm Micrometric device: 0.001 mm Grinding wheel Diameter x width x bore: 225x25x50/51 mm Standard RPM: 2700 rpm With variable speed drive: 3700-1300 rpm All technical data are provided without guarantee and are subject to possible errors or omissions.

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Rjdpfxsw T Sc Nj Ag Isp Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Rsdpfx Agjw T Sd Te Iop Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 Redpfx Agew T S Sqo Isp TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 7063234, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 550 kg Customs tariff number: 8460.2930 Dimensions: 150/60/120 cm TECHNICAL SPECIFICATIONS Minimum diameter: 0.1 mm Maximum diameter: 12 mm Maximum plunge grinding length: 50 mm Work wheel diameter: 150 mm Redpfx Agow T Tqnj Ijp Work wheel length: 50 mm Regulating wheel diameter: 100 mm Grinding motor: 1.5 kW Work wheel speed: 4,500 rpm Regulating motor: 0.35 kW Regulating wheel speed (variable): 20–150 rpm For diamond dressing: 455 rpm Technical specifications are provided without obligation and subject to errors or omissions.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2410, Year 2001 with Fanuc Deco and 10 axes Rsdpfxsw T Tfrj Ag Ijp Fully inspected and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1500 kg Customs tariff number: 8458.11 20 Dimensions: 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard execution) Headstock (Z1 axis) (+C axis optional) Maximum bar passage diameter: 10 mm Maximum workpiece length, depending on guide bush: 60/90 mm Programmable spindle speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of transverse drilling/milling tools on turret: 4 Programmable rotation speed: 0-12,000 rpm End-working attachment (X3/Y3) Max. number of end-working tools: 3 Programmable rotation speed: 0-12,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C axis optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or rotating spindles: 4 Maximum spindle speed: 9,000 rpm Tornos-Bechler/Fanuc specific CNC control Processor type: 486 DX2 Number of simultaneous axes: 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details are subject to verification and provided without guarantee.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 4868, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight with motor, without base: 245-295 kg Net weight of standard pedestal (base): 95 kg Customs classification: 8462.9930 TECHNICAL SPECIFICATIONS TYPE D-8 / D8-200: Rjdjw T S Tzspfx Ag Iep Maximum capacity: 8 tons Maximum cutting section for Rc=40 kg/mm²: 200 mm² Standard fixed stroke: 20 mm Variable stroke, standard range: 4-36 mm Variable stroke, extra-large range: 8-50 mm Maximum height between table (without plate) and ram: 220 mm Thickness of movable plate: 42 mm Standard opening in the plate, diameter: 50 mm Opening in the table, diameter: 60 mm Ram bore, diameter x depth: 38x60 mm Ram adjustment (tie rod extension): 70 mm Ram base surface (width x depth): 105x90 mm Required power, HP: 1/3 Flywheel dimensions, diameter x width: 410x85 mm Standard flywheel speed: 180 RPM TECHNICAL SPECIFICATIONS TYPE D-8: Distance from ram center to frame: 100 mm Distance between frame columns: 170 mm Table surface, width x depth: 270x190 mm TECHNICAL SPECIFICATIONS TYPE D8-200: Distance from ram center to frame: 200 mm Distance between frame columns: 160 mm Table surface, width x depth: 270x300 mm Unless otherwise stated, these technical specifications are provided without engagement and subject to possible error or omission.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3467, Country of manufacture: Switzerland Net weight: 3000 kg Customs tariff number: 8458.11 20 Dimensions: 215 x 150 x 215 cm TECHNICAL SPECIFICATIONS (standard) Headstock (Z1 axis) (+C optional) Maximum bar capacity: dia. 20 mm Maximum part length depending on type of guide bush: 200 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum spindle power: 3.7 (5.5) kW Tool holder (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes): 2 x 5 Tool section: 16 x 16 mm Number of cross drilling/milling stations on turret: 4 Programmable rotational speed: 0–8,000 rpm End working attachment (X3/Y3) Maximum number of end working tools: 4 Programmable rotational speed: 0–8,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C optional) Maximum clamping diameter: 20 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum number of secondary operations: 7 Number of fixed or rotating spindles: 7 Maximum spindle speed: 8,000 rpm Tornos-Bechler/Fanuc dedicated CNC Processor type: 486 DX2 Number of simultaneous axes: all Rsdpfx Agew Uczxo Iep All technical data are provided without guarantee and subject to change and error.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year: 2007 - Fanuc 21i-TB 1 External Grinding Spindle Country of Origin: Switzerland Voltage: 380/50/3 Net machine weight: 4,000 kg TECHNICAL SPECIFICATIONS Distance between centers: 600 mm Center height: 175 mm Maximum workpiece weight: 80 kg Longitudinal Slide Z Max. travel: 800 – 1,150 mm Travel speed: 0.001 to 10,000 mm/min (early 2000’s model: 0.001-5,000 mm/min) Resolution: 0.0001 mm Cross Slide X Max. travel: 285 mm Travel speed: 0.001 to 20,000 mm/min (early 2000’s model: 0.001-10,000 mm/min) Resolution: 0.0001 mm Wheelhead (universal version) Swiveling range: -15° to 225° (early 2000’s model: -15° to 195°) Rjdpfew T Sh Eex Ag Iop Swivel axis: 2.5 / 1 ° Hirth Drive power: 7.5 or 9 kW or 11 kW Grinding wheel: 500x63 (80/110F5) x203 mm Workhead Rotational speed: 1 – 1,500 min-1 Mount taper: MT4 or MT5 / ISO 50 Drive power: 1.6 or 3.0 or 4.0 kW Tailstock Mount taper: MT3 or MT4 Quill stroke: 35 / 50 mm (early 2000’s model: 35 mm) Quill diameter: Ø 50 mm Fine adjustment: +/- 40 µm Control system: Fanuc 21i-TB All technical details are provided in good faith but subject to errors or omissions.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341966, Country of manufacture: Switzerland Voltage: 400/50/3 Net weight: 2640 kg Customs tariff number: 8458.1120 Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 330 mm Maximum diameter admitted over cross slide: 160 mm Center height over cross slide: 83 mm Maximum diameter admitted over bed: 430 mm Turning length (depending on equipment): 650 mm Headstock: Standardized spindle nose, suitable for use with various collets and chucks using adaptation accessories. Collet accessories (SCHAUBLIN): B45/F48 Maximum bar capacity, diameter: 36 mm / 42 mm Automatic chuck, standard diameter: 170 mm Direct drive via AC motor, power at 100% / 50% duty: 15 / 18.5 kW Maximum torque at 100% / 50% duty: 135 / 165 Nm Maximum spindle speed: 5000 rpm C axis: Pneumatic clamping cylinder: 2700 daN Cross slide: Transverse travel, X axis: 240 mm Radial resolution: 0.0005 mm AC motor drive, nominal torque: 3 Nm Ball screw, diameter x pitch: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm AC motor drive, nominal torque: 6 Nm Redpfow T Smhex Ag Isp Ball screw, diameter x pitch: 32 x 10 mm Feeds: Stepless working feeds, X/Z axes: 0–5000 mm/min Rapid traverse feeds, X/Z axes: 8 / 10 m/min Feed force, X/Z axes: 420 / 670 daN Turret tool system: Number of tool stations: 8 Standardized tool holder mounting: VDI 30 Max. tool shank size: 20 x 20 mm Integrated coolant Indexing in both rotation directions Coolant system: Tank capacity: 120 liters Pump flow rate: 10 l/min Pressure: 5 bar Unless otherwise specified, the above technical details are provided without commitment or liability.