Used Table Feed for sale (23,513)

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz Djdpox U Eiaefx Affekk - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: used, machine/vehicle number: 008442, Max. panel width: 1100 mm Max. panel length: 2800 mm Max. panel stack height from the ground: 1250 mm Lifting capacity: 100 Kg Work capacity: 8 Cycles/min Dksdpfx Afjyw Ia Tsfek Movement system: suction cups.

Condition: excellent (used), functionality: fully functional, Panel saw Paoloni S150 Dodpfxeyxq Ags Affekk Carriage length: 1500 mm Cutting width to the right: 1410 mm Scoring unit Maximum cutting height: 90 mm Manual blade tilt adjustment up to 45° Manual raising and lowering of the saw blade Main motor power: 5.5 kW Blade size max/min: 315/250 mm Scoring blade size: 120 mm CE certificate

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AM00222090802-01-03, - Function: Heat sealing of blister boxes - Main material of the machine: Stainless steel 304, aluminum alloy - Dimension: 1000mm x 715mm x 450mm - Weight: About 150 kg (excluding mould) - Power supply: 220 V 50 / 60 Hz single phase 3,5 KW - Compressed air supply: Pressure 5 bar - 8 bar, approx. 18 L / min - Seal size: 300mm x 400mm - Packing depth: Deepest 100mm - Production speed: Up to 12 cycles per minute depending on operator skill - Heat seal pressure: 300-1500kg adjustable Autovak is an international company with research, development and manufacturing facilities in Suzhou, China, and sales and service offices in the United States, Germany and Malaysia. The company has over 20 years of experience in the packaging of medical devices. Dedpfxopfcy Eo Affjkk From doing OEM for European packaging machine manufacturers to produce self-designed machinery and equipment with independent intellectual property rights and own brands, Autovak has accumulated a lot of know-how in the field of medical device packaging and online printing.

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Nattheim Dsdpjx It Auefx Affokk

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head Djdpfx Afsw Nmw Hsfskk - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: excellent (used), Good day! I would like to offer you the following machine: 1 used Altendorf F 45 panel saw - Hydraulic height and tilt adjustment - Digital display (speed and tilt) - 4.5 m cutting length - Automatic star-delta start - 105 mm cutting height with a 350 mm blade and scoring unit - 155 mm cutting height with a 450 mm blade without scoring unit - 3000/4000/5000/6000 rpm - Automatic motor brake - Rip fence with fine adjustment - Parallelogram safety guard - Table extension and width extension - Mobile base - Extraction ports top and bottom - Swivel shoe for edging - Adjustable handle on the sliding table - Operating tools - Operating manual/spare parts list New parts: - Narrow extraction hood 90° (181.00 + 19 % VAT) - Wide extraction hood 45° (268.80 + 19 % VAT) - Poly Flex V-belt 11W875 (35.50 + 19 % VAT) - Flat belt for scoring unit (32.50 + 19 % VAT) - Gas pressure spring 50N for scoring unit (45.30 + 19 % VAT) - GUHDO saw blade 350 mm (78.50 + 19 % VAT) - Saw arbor new bearings installed (250.00 + 19 % VAT) - Scoring unit new bearings installed (150.00 + 19 % VAT) Optional equipment: - 7.5 kW 380 Volt motor Original price: €1,350 + 19 % VAT - Scoring unit Original price: €3,150 + 19 % VAT - 4.3 m sliding table Original price: €4,250 + 19 % VAT - Pneumatic pressure beam 3.2 m Original price: €3,800 + 19 % VAT - Rip fence with fine adjustment 1.3 m Original price: €580 + 19 % VAT - Duplex double-sided mitre fence Original price: €1,350 + 19 % VAT - LASER cut line indicator Original price: €2,300 + 19 % VAT Dkedpjyy S Uysfx Affjk - Circular saw feed unit Panhans type 76 Original price: €4,665 + 19 % VAT Price: €13,800 + 19 % VAT The machine has been technically inspected, cleaned, adjusted, and repainted. Cables and plug included, ready for immediate use. Payment by cash or bank transfer prior to collection or shipping possible. The machine is sold without any warranty or guarantee. Please send me a short message. Thank you!

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 8109/30, Drilling and Dowel Inserting Machine with PLC + Part Return | 8 heads For sale: a professional through-feed drilling and dowel inserting machine for the production of furniture components, particularly drawer sides. The machine is equipped with PLC control, automatic part return, and an expanded head arrangement (including rear heads), enabling the complete operation to be performed in a single pass—without re-feeding the workpiece. Technical Specifications: - Number of heads/motors: 8 - Head configuration: front/side/rear (double-sided machining in a single cycle) - Control: PLC - Part return: yes (closed production loop) - Maximum working width: 2000 mm - Power supply: 400 V Dkjdpfx Aoyzg Udjffek - Pneumatics: yes - Year of manufacture: 1981 - Manufacturer: Gerhard Koch (Germany) - Condition: operational, in ongoing serial production Performance: Approx. 6,000 drawer sides per 8-hour shift Thanks to the rear heads, components that typically require two passes are processed in one, significantly reducing cycle times and increasing productivity. Applications: - Drawer sides - Cabinet components - Batch and repeat production - Automated production lines Key advantages: - Single pass processing instead of two - High repeatability - Stable, heavy-duty construction - Perfect for mass production - Proven German technology Location: Elbląg Please contact me for further information.

Year of construction: 2011, condition: used, functionality: fully functional, Universal Testing Machine Inspekt Table Blue 5 kN Mechanical Design: - 2 backlash-free ball screw spindles, driven by a DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm - 1 test space up to nominal load: - Test space width: 420 mm - Max. test stroke without test tools, adapters, and KMZ: 1025 mm Travel Speeds: - Test speed: 0.0015 – 1000 mm/min at full load - Return speed: 1000 mm/min Force Measurement: - Measuring range: 0.8 – 100% of nominal load, Class 1 (optionally Class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) - Force measurement resolution: +/-180,000 digits at 20 ms integration time The machine is delivered with a factory test certificate. If factory or DKD calibration at the installation site is requested by the customer, this will incur additional costs. Crosshead Travel Measurement: - Incremental square-wave input with encoder monitoring, saves crosshead position - Crosshead travel resolution: 1 μm Dimensions (W x D x H) / Weight: - Load frame: 685 mm x 550 mm x 1420 mm / 100 kg – controller mounted on the load frame Dkodeyyu I Nopfx Affsk Standard Functions: - Force, displacement, and strain control - Overload protection, automatic force calibration - Specimen break detector, return function - Set-up mode via control panel with display (force, displacement) Data Processing: - USB 2.0 interface or LAN - Data transfer rate to PC: 50 Hz (standard); optionally, higher data acquisition frequency via special software add-on module - Internal data processing rate: 2 ms - Optional: up to 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) for additional sensors Power Supply / Operating Conditions: - 115/230 VAC, 0.5 kVA, 50/60 Hz, 5–40°C, 20–80% humidity - Required options for operation: load cell, grips, PC (current standard, OS 8-10-11), test software 5000 N Load Cell - Measuring range: 5–5000 N for tension and compression, with nominal 2 mV/V output signal - Overload protection: +/-100% - Linearity: +/-0.05% - Hysteresis: +/-0.03% - Repeatability: +/-0.02% - Incl. 1.5 m connection cable and calibration certificate Supplied with Extensometer MFX 200 The MFX 200-B extensometer, with its robust construction and high measurement accuracy, is suitable for almost all specimens with an initial gauge length from 10 mm. All strains can be measured, from the modulus of elasticity up to specimen break. It can be used unrestrictedly in both the lower and upper test areas. In combination with the MFQ-A, r- and n-value measurements on sheet metal are also possible. Two different measurement systems are available, differing in their signal and technical specifications (see technical documentation).

Condition: used, machine/vehicle number: 006622, Max. panel width: 2100 mm Max. panel length: 2850 mm Max. panel stack height from the ground: 2100 mm Lifting capacity: 250 Kg Dkodeu T Tt Tepfx Affek Movement system: suction cups.

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Dsdpfxox Th N Hj Affekk Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available

Condition: good (used), Year of construction: 1990, Table milling machine with power feed Tilting spindle Djdpfxjyy I R Re Affskk With table extension on both sides

Condition: used, Year of construction: 1998, functionality: fully functional, Tabulka 1800 x 1800 mm Průměr vřetena 130 mm Osy X x Y x Z ... 2000 x 2000 x 800 mm Vřeteno 800 ot/min Max. zatížení stolu 12 t Strojní dimesniony 6700 x 6000 x 4420 mm Hmotnost stroje 32 000 kg Řídicí systém MEFI 872 Series. Přestavěn v roce 1998. Dodewhpv Rspfx Affjkk

Condition: new, For sale a set of jaws for the rotary table of vertical lathes manufactured by Ryazan 1512, 1516, 1525, 1L525. Other spare parts for lathes, milling machines, grinders are also available from stock. Dsdpjwald Uefx Affjkk We invite you to submit inquiries.

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Djdpfx Afoxnlavefskk

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_1, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Dsdpfx Afoyu Uwxsfokk Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: used, Year of construction: 2006, Carriage length: 5000 mm Cutting width at rip fence: 1050 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scorer: no Dkedpfxoyvz N Ss Affek Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: handwheel Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 400 mm Speeds: 4000 / 4800 / 6000 rpm Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 5500 mm Machine width: 1900 mm Weight: 1200 kg

Condition: used, Year of construction: 2002, Carriage length: 3000 mm Cutting width at rip fence: 1000 mm Cutting width at cross-cut fence: 3200 mm Dodpfx Asyvz Rceffokk Cutting depth: 150 mm Scorer: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: scale Cross-cut fence display: scale Saw blade diameter: max. 450 mm Speed: 4000 rpm Motor power: 5.5 kW Extraction connection: 120 mm and 80 mm Machine length: 3200 mm Machine width: 2000 mm Machine height: 1600 mm Weight: 1000 kg

Condition: new, all stainless steel turn table new diameter 1.250 mm Djdpfxeytn Nxs Affjkk adjustable height 820 – 910 mm safety guard (height 10 mm) 1 speed (3 rpm) 0,12 kW

Condition: new, all stainless steel turn table new Dkjdpsytn Nlofx Affek diameter 1.250 mm adjustable height 820 – 910 mm safety guard (height 10 mm) adjustable speed (2-7 rpm) 0,12 kW

Condition: excellent (used), lifting height: 2,000 mm, load capacity: 2,000 kg, total length: 2,600 mm, total width: 800 mm, transport length: 2,600 mm, power: 1.5 kW (2.04 HP), roll width: 700 mm, 2 WTT Fördertechnik - hydraulic scissor lift tables with driven roller conveyor. Type: E.20.16.8.2.0.RB, Dkjdouyhltopfx Affsk Length - 2600mm, width - 800mm roller width 700mm Load capacity 2000kg each Lifting height max 2000mm

Condition: used, machine/vehicle number: 008381, X axis working area: 4250 mm Dodsx Swc Hspfx Affjkk Y axis working area: 2280 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 11 Total number of tool changer positions: 24

Condition: excellent (used), lifting height: 1,350 mm, load capacity: 1,000 kg, total length: 2,500 mm, total width: 600 mm, working height: 1,350 mm, roll diameter: 50 mm, power: 1.1 kW (1.50 HP), lifting time: 15 s, construction width: 600 mm, roll spacing: 150 mm, roll width: 550 mm, segment length: 2,500 mm, Scissor Lift Table WTT Fördertechnik, Series E 10.10.5.1.0.RB Roller conveyor length: 2500 mm Platform width: 600 mm (Rollers: 550 mm) Load capacity: max 1000 kg Useful lift: max 1350 mm Djdpfx Afov Acnksfekk Total: 7 units available Individual sale possible Equipped with non-driven support rollers made of precision steel tubing 50 x 1.5 mm wall thickness with 12 mm spring axles Support roller pitch: 150 mm Support roller installation length (width): 550 mm Roller conveyor height in transfer area: 280 mm Lifting time: approx. 15 sec. Foot guard contact strips Handheld pushbutton switch on a 3 m cable Automatic stacking lock: When the platform is slightly raised, the support rollers are automatically braked. Fold-down inspection supports Built-in hydraulic unit: 1.1 kW, 200 bar Operating voltage: 400V, 50 Hz (Technical data subject to change and errors; prior sale reserved)

Condition: excellent (used), Year of construction: 2002, Model .Amada. Vipros 368 King Stock number 01967 Year of manufacture 2002 Frame Construction ... Bridge Type Press Capacity ... 30 Tonnes (294 kN) Press Type ... High Speed Hydraulic Servo Ram Axis Traverse Distance ... 1525 x 2000 mm Workable Max. Sheet Size ... 1525 x 4000 mm (with auto repositioning) Max. Material Thickness ... 3.2 mm mild steel Max. Hole Dia. Max. Material ... . (shearing strength 36 kg/mm2) 82 mm dia Max. Material Weight ... 75 Kg Max. Material weight ( Max. Speed) ... 60 Kg Max. Hole Dia. ... 114.3 mm Number Of Stations ... 58 stations:24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 2 x 114.3 mm Axis Speed ... 113.0 m/min Hits Per Minute (2mm pitch) ... 860 H.P.M./3 mm stroke (8mm pitch) ... 560 H.P.M./3 mm stroke (25mm pitch) ... 460 H.P.M./3 mm stroke Turret Speed Bi-Directional ... 30 R.P.M. Punching Accuracy ... ± 0.1 mm (incl. 1 reposition) Ram Stoke Length (maximum) ... 40 mm Tool Lubrication ... Air Blow System Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 28 kVA 400V +/- 10% 50Hz Dedpfovn D Tfjx Affokk Air Pressure Required ... 5.0 Kgf/cm2 Air Flow ... 250 1/min Cooling Water Flow ... Min 40 1/min. Machine Length ... 5025 mm Machine Width ... 4120 mm Machine Height ... 2630 mm (3190 mm to mirror) Machine Weight ... 18000 Kg

Condition: excellent (used), Year of construction: 2019, Holzkraft Panel Saw Si 400 es Year of manufacture: 2019 Dksdoyyax Hspfx Affok Table dimensions: 940 x 560 mm Table height: 900 mm Cutting length: 3200 mm Sliding table dimensions: 360 x 142 x 2600 mm Max. cutting height 90°/45° with scoring unit: 138 / 98 mm Max. cross-cut width to the left of saw blade: 3260 mm Cutting width with rip fence: 1270 mm Saw blade tilting range: 90° - 45° Max. saw blade diameter: Ø 400 mm Scoring blade diameter: Ø 120 mm Main saw blade speed: 3500/5000 rpm Scoring unit speed: 9200 rpm Motor power: 400 V / 50 Hz / S6 - 40% 7 kW (9.5 HP) Scoring unit motor power: 0.55 kW (0.75 HP) Extraction port diameter: 120 mm Blade guard extraction port Ø: 80 mm Weight approx. 680 kg