Used Table Saw With Sliding Table for sale (26,791)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Offered from an insolvency sale is a fully functional panel saw. Altendorf WA 80 Year of manufacture 2004 Tilts up to 45° with motorized adjustment Motorized height adjustment With scoring saw Max. saw blade diameter 400mm Max. cutting height with a 350mm blade = 98mm at 90° --- 75mm at 45° With motor brake (approx. 4.5 seconds to stop) Carriage length 3200mm Cutting width to the right of the saw blade 1350mm Speeds 3/4/5000 rpm 380 volts Bwjdpfx Aaszhak Aoisr Weight 990kg Emergency stop button Duplex fence Wide and narrow blade guard + used saw blades as shown in the picture

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 2.21 kW (3.00 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,270 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,700 rpm, total length: 3,200 mm, total width: 5,155 mm, total height: 1,550 mm, overall weight: 691 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Year of manufacture: 2022 Bsdey Shx Sepfx Aaiswr 9 kW motor Scoring unit Panel processing up to 3.2 m length Squaring fence with 2 digital readouts Parallel fence with 1 digital readout Excellent condition

Condition: excellent (used), Cutting length: 2700 mm. Bevel angle up to 45 degrees. Hydraulic height adjustment. Very good condition. Bwodpfxozhlpqo Aaier

Condition: good (used), Year of construction: 1977, machine/vehicle number: 6297, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 380 V, cutting height (max.): 100 mm, saw blade diameter: 400 mm, height adjustment type: mechanical, Industrial table saw with 3000mm table. The blade cannot be tilted. It has been in everyday use, being sold becuse of machine change. It needs a little fine adjustments, but it works well. Pre-cutting motor was added to the machine. Bedpfozi Emrex Aaiowr

Condition: used, functionality: fully functional, power: 6 kW (8.16 HP), rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,200 rpm, Equipment: motor brake, Circular saw for edging with scoring Bwedpfjwf R I Nex Aaior CASOLIN ASTRA Blade diameter 400 mm 3 rotations: 3200 / 4200 / 5000 3000 mm movable table Main motor 5.5 kw Electro brake on the motor In good working condition, ready for production

Condition: good (used), For sale is a used SCM panel saw with a cutting length of 3000 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical data: - Cutting length 3000 mm - Cutting width 600 mm - Cutting height 135 mm - Max. saw blade diameter 400 mm - Dust extraction connection 120 mm - Motor power 5.5 kW / 7.5 hp The panel saw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Saw, circular saw, panel saw Bodpjza Dqfofx Aaiewr Reference: R-A0074

Condition: used, Martin T60c sliding table saw 5.5 kW motor, 430 cm carriage, Bsdpszg U Hiofx Aaiewr Right-hand side adjustable with a motor to 840 mm, Max. blade diameter: 400 mm, Tilt 0-45 degrees, adjustable with a motor, Blade height adjustable with a motor.

Condition: used, Altendorf F45 panel saw, Bwedpszg Uw Iofx Aaijr Main motor: 5.5 kW, Scoring saw motor: 0.75 kW, Carriage length: 300 cm, Tilt: 0-45 degrees, motor-driven adjustment, Blade height adjustment: motor-driven, Max. blade diameter: 350 mm, Cutting width on the right side: 1040 mm.

Condition: repair required (used), Year of construction: 2008, - Used machine Bedpfx Aaey R Ugtjijwr - Saw blade tiltable +/- 45.5° - Sliding table: 3200 mm - Cutting width: 1250 mm - Motor power: 5.5 kW / 400 V - Ex site, loaded free of charge

Condition: good (used), Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with independent motorisation Squaring carriage length 3800 mm Main blade diameter 400 mm Scoring blade diameter 120 mm Blade tilt 0-45 degrees Max cutting height at 90 degrees 140 mm Bsdpjytufgjfx Aaiswr Max cutting height at 45 degrees 97 mm Blade rotation speed rpm 3000/4000/5000 Scoring rotation speed rpm 8500 Main blade motor power Hp 9,5 Scoring blade motor power Hp 1,7 Cutting width at parallel guide 1500 mm Parallel guide programmed with THK sliding Electronic adjustment of the scoring unit Squaring frame with ‘COMPEX’ device for angled cuts with automatic compensation of the stop position. Start/stop buttons integrated into the carriage Eccentric workpiece clamping arm Extension to the work surface Squaring guide with 3 LCD readers for stop positions Full support and Wireless: adjustable frame for angled cuts complete with wireless function Suction mouth diameter: at the base 120 mm - at the suspended guard 100 mm Overall dimensions of assembled machine mm 4200 x 4300 x 1800 h Overall dimensions for transport mm 4200 x 2350 x 1800 h + Pallet mm 1600 x 1000 x 800 h Weight kg 1140

Condition: new, Heavy-duty work table made of robust, ribbed cast iron Sturdy base made of welded steel Precise panel gliding table made of anodized aluminum Carbide guide rails – for lasting precision and minimal maintenance of the gliding table Swiveling cast iron saw head with double segment guide Solid parallel fence with round bar guide Integrated miter gauge on the gliding table Scoring saw with its own powerful drive motor (optional) Equipped with a high-quality rip fence and telescoping stop, integrated roller, angled scale, and practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Bedpfx Aaeit I Sbjiowr Including saw blade pendulum guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm) 140 with 400 mm blade Max. cutting height at 45° (mm) 100 with 400 mm blade Saw blade swivel angle (degrees) 90/46 degrees Raising and swiveling of the saw blade unit: manual Saw blade speed (rpm) 3500/5000 Main motor power (kW) 50 Hz 7.5 Scoring saw motor power (kW) 50 Hz 1.3 Scoring saw speed (rpm) 9200 Panel cutting size (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Dust extraction port diameter (mm) 120, 60

Year of construction: 2008, condition: excellent (used), SAC CS40 Format Panel Saw year 2008 Bsdpfshwwlpox Aaiewr S/N 312029 Cutting length 3,200 mm Anodized aluminum sliding table 3200 x 420mm, locks for easy panel loading in any position steel gliding system Main saw arbor(30 mm) 45° tilting electric raise & lower of main blade. Main motor 5,5 kW, self-braking motor utting speeds 2,600 - 4,000 and 5,600 rpm Blade diameter max 400 mm max cutting height 130 mm ( 90° ) 100 mm ( 45° ) rip fence 1,500 mm scoring saw motor 0,75 kW 120 mm (Dia. scoring blade - 8,000 RPM scoring unit w/external adjustment ) Square crosscut fence with stops, extension table with miter fence & sliding outrigger support. 400 V , 50 Hz weight 820 Kg CE ,marked

Condition: good (used), Year of construction: 1984, functionality: fully functional, Offered from a workshop for people with disabilities is a fully functional panel saw. Altendorf F45 Tiltable up to 45° via handwheel Year of manufacture 1984 With scoring saw (no saw blade included) Max. saw blade diameter 400 mm A 350 mm blade is installed Max. cutting height with a 350 mm blade = 98 mm at 90° – 75 mm at 45° With motor brake (approx. 2.5 seconds to stop) Bwjdpfjzdqxvjx Aaior Carriage length 2500 mm Cutting width to the right of the saw blade 850 mm Speeds 3/4/5/6000 rpm With cutting line laser Gresser HEnE 632.8 nm 380 Volts Weight 990 kg Emergency stop button + used and new saw blades as shown in the picture

Condition: used, SCM 320cm SiX panel saw 320cm carriage, aggregate tilting in two directions +45 to -45 degrees, blade tilt and up/down adjustment with electric motor, rip fence on the right side with electric adjustment up to 1500mm, 2-axis scoring saw with electric adjustment, 7.5KW motor, speeds controlled by a frequency inverter, max. blade diameter 550mm, carriage with angle adjustment used machine, good condition The machine has a new, non-original control system. Bwjdjzd Uf Topfx Aaier All adjustments are functional.

Condition: used, total length: 2,700 mm, total width: 2,220 mm, total height: 1,500 mm, Colour: Grey Weight: 900 kg - Documentation available: No - CE certificate present: No - Serial number: V024400 - Main motor power [kW]: 5.5 - Roller table length [mm]: 2500 - Table width [mm]: 1940 - Max. saw blade diameter [mm]: 350 - Dust extraction nozzle diameter [mm]: 140 - Options: Scoring unit - Schuinstelbare zaagaggregaat: - └ Max. adjustable [°]: 45 - Transport dimensions: 2700mm x 2220mm x 1500mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Bwsdpewnh S Dsfx Aaisr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2025, For sale is a used JET panel saw JTS-600XL with a maximum cutting length of 1600 mm. The machine was only briefly used for demonstration purposes in our showroom and is therefore in as-new condition. Technical data: - Motor: 230 V / 1.5 kW / 2 HP - Saw blade speed: 4000 rpm - Saw blade diameter / bore: 250 / 30 mm - Saw blade tilt: 0° – 45° - Max. cutting depth at 0°: 80 mm - Max. cutting depth at 45°: 54 mm - Max. cutting width at rip fence: 610 mm - Table dimensions: 800 x 350 mm - Table extension: 415 x 350 mm - Table widening (right): 800 x 270 mm - Precision sliding table: 1600 x 255 mm - Max. cutting length: 1600 mm - Machine dimensions: 1650 x 2200 x 1100 mm - Weight: 157 kg Scope of delivery: - Sliding table 1600 x 255 mm - Circular saw blade Ø 254 x 30 x 3 mm - 36 TCT teeth - Parallel fence - Support table 460 x 600 mm with extendable crosscut fence 2200 mm - Extraction port Ø 100 mm Bodpfxjy Nm H Ao Aaiswr The machine is located in A-8561 Söding and can be inspected during our business hours at any time. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-D1618

Condition: new, Year of construction: 2021, functionality: fully functional, Feed rate: 10 m/min – 10 + 18 m/min; Drive motor: 0.75 kW (S6) – 1.1 kW (S6); Precision running and guiding surfaces; Min. workpiece length: 140 mm; Min. Workpiece width: 70 mm. Bwjdpsy Ndhdjfx Aaier Segmented, rubberized chain plates with quick-change system. The minimum workpiece width varies depending on the workpiece length, height, and surface finish. Swiveling 15" smartouch control panel. Unlimited memory for user-defined edge programs. Fine adjustment of path parameters. Simple, clear, and intuitive display of units and functions. Unit selection and precise fine adjustment of the motor-positioned units (adjustment accuracy 1/100 mm) directly via the control panel. Adhesive temperature setting with automatic temperature reduction in standby mode. Pressure setting in the pressure zone. Optimization of the edge overhang during trimming (front and back). Plain text error messages. Maintenance schedule and linear meter counter.

Condition: used, Altendorf F45 panel saw 320 cm carriage, Bwsdpfxey T Euts Aaior blade tilt and height adjustment via hydraulic system, rip fence on the right side, manually adjustable up to 1350 mm, scoring saw, 0.75 kW, 5.5 kW motor, max. blade diameter 450 mm.

Condition: good (used), Year of construction: 1986, functionality: fully functional, The panel saw comes with approximately 10 saw blades and scoring saw blades, and a laser is also included. Chip extraction system is included. Bedpfx Aaoy Suidsiowr

Condition: excellent (used), Year of construction: 2001, I sell the format sliding table saw with scoring SCM SI 300N, year 2001. Bwjdpfxoiu Awbo Aaior Sliding table length 3200mm. Max. cutting width on cross fence 1950 / 2850mm. Max. cutting width on parallel fence 1270mm. Motor 5,5 kW. Max. saw blade diameter fi.300x30mm Max. scoring saw blade diameter fi.120x20mm Main blade (scoring blade) 4000 (8000) rpm. Condition very good. Avialable immediately. Please contact for more photos and details.

Condition: excellent (used), 4 kW engine. Trimmer attachment. Cutting height: 9 cm. Ground clearance: 125 cm. Table length: 157 cm. Bjdpfoy S U D Uox Aaiewr

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Bedpfoyymtdex Aaiewr Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: like new (used), Year of construction: 2020, For sale is a demonstration machine: Hammer K3Winner Comfort panel saw with a cutting width of 300 mm. The machine was only briefly used for demonstration purposes in-house and can thus be considered as new, with full warranty/guarantee. Technical specifications: - Sliding table 2000 mm - Extension table 1100 mm - Mitre fence 1300 mm - Angle stop index - Saw blade tiltable 90–45° Bwodpfxey Akdrs Aaijr - Max. cutting height 104 mm with 315 mm saw blade diameter - Cutting width 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2020 The panel saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, panel Reference: R-D1618-10

Condition: ready for operation (used), In very good condition. Bedpfxoyy Sqbe Aaiewr

Condition: excellent (used), SCM SI 400 EP panel saw Sliding table 320 cm, Bwsdey Rzphopfx Aaier Motorized tilting 0–45 degrees Motorized up/down blade adjustment, Right-side rip fence motorized adjustable up to 1500 mm, Manual scoring unit adjustment, 9 kW motor, 3 blade speeds, Max blade diameter 400 mm, Sliding table fence adjustable for angle Used machine, in very good condition.