Used Table Saw With Sliding Table for sale (27,254)

Condition: good (used), Year of construction: 1995, Panel saw Manufacturer: Martin Model: T72 Year of manufacture: 1995 - When the machine is switched on, the control display takes approx. 15 minutes to show any information. - The flat belt for the scorer is missing. Needs to be replaced. Dwsdpfey A I Nrex Ai Eed - The pneumatic clamping of the parallel fence does not clamp. Carriage length: 3,300 mm Cutting width: approx. 1,200 mm Cutting height: approx. 170 mm Saw blade diameter: max. 500 mm Power: 5.5 kW Speed: 2,800 / 4,000 / 5,500 rpm Scorer: Yes Motor brake: Yes

Condition: good (used), Year of construction: 1986, functionality: fully functional, Sizing saw Altendorf TRK 45 Year of manufacture 1986 S/N 86-9-209 checked in our workshop for normal operating condition Gs Dkkmsng Etrjz Ssua carriage length: 1350 mm height and swivel adjustment manual with handwheel engine power: 5,5kW cutting width: 1250 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 ( without scorer ) Dedpfxeng Etrs Ai Eowd with scorer Automatic engine brake weight approx. 1100 kg Technical specification under reserve + 2 additional saw blades

Condition: good (used), Year of construction: 1986, functionality: fully functional, Equipment: saw blade guard, scorer, The panel saw comes with approximately 10 saw blades and scoring saws, as well as a laser. Dsdpfx Aoy Suidji Eowd

Condition: excellent (used), Year of construction: 2001, I sell the format sliding table saw with scoring SCM SI 300N, year 2001. Sliding table length 3200mm. Max. cutting width on cross fence 1950 / 2850mm. Dsdpfxjiu Awbo Ai Ejwd Max. cutting width on parallel fence 1270mm. Motor 5,5 kW. Max. saw blade diameter fi.300x30mm Max. scoring saw blade diameter fi.120x20mm Main blade (scoring blade) 4000 (8000) rpm. Condition very good. Avialable immediately. Please contact for more photos and details.

Condition: used, SCM SI400n sliding table saw Table extension: 200 cm, Dwjdjznbcmspfx Ai Eod Main motor: 7.5 kW, Scoring saw, manually adjustable, Max. cutting width from the right side: 1670 mm, Tilt: 0-45 degrees, manually adjustable, Blade height adjustment: manual, Max. blade diameter: 400 mm, 3 blade speed settings.

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Price has just been reduced and will not reduce any further. Please only enquire if you want to buy it at this price before we scrap it as space is needed. Dwedpfx Aierubg Hs Eed

Condition: used, Martin T60c sliding table saw 5.5 kW motor, Dwjdpfx Aiszg U His Eod 430 cm carriage, Right-hand side adjustable with a motor to 840 mm, Max. blade diameter: 400 mm, Tilt 0-45 degrees, adjustable with a motor, Blade height adjustable with a motor.

Condition: excellent (used), Year of construction: 2010, Panel saw Dwodpfx Aszy Uzyei Eod Manufacturer: Felder Type: Kappa 550 Year of manufacture: 2010 Sliding table length: 3,200 mm Cutting width: 1,250 mm Cutting height: max. approx. 204 mm Power: 7.5 kW Max. saw blade diameter: 550 mm Height adjustment: Electric Angle adjustment: Electric Cutting width display: Digital Scoring saw: No Motor brake: Yes

Condition: excellent (used), Year of construction: 2020, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 125 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, Sliding table saw Robland Z400-EL. A robust, professional machine for precision cross-cutting and ripping of wood panels and solid wood. Ideally suited for carpentry, furniture making, and workshop use. Specifications and features: Dwsdpfx Asz R Nuisi Eed * Electric height and tilt adjustment of the saw blade with digital readout * Sliding table length: 3,200 mm * Saw blade capacity up to 400 mm * Cutting height up to 125 mm at 90° * Variable speeds for different blade diameters * Scoring unit * Digital readout for rip fence position * 10 hp motor, separate scoring unit In perfect working order. Transport across Europe can be arranged at a good price.

Condition: excellent (used), Motor: 5.5 kW Cutting height: 9 cm Dwsdpfxe Agrffs Ai Eod Table length: 330 cm Feed width: 100 cm Scoring unit Cutting angle and cutting height are hydraulically adjustable.

Condition: used, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, cutting height (max.): 125 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: mechanical, rotational speed (max.): 6,000 rpm, total length: 3,200 mm, Equipment: documentation/manual, scorer, Welcome, we are selling a Robland Z320 panel saw. Motor: 7.5 kW / 400 V Saw head can be swiveled up to 45° Saw blade diameter: 400 mm Sliding table length: 3,200 mm Dust extraction port: 120 mm Djdpfx Aozylxpsi Ejwd Max. cutting height: 125 mm Max. cutting height at 45°: 100 mm Speeds: 4,000/5,000/6,000 rpm Scoring saw blade diameter: 100 mm Scoring saw cutting height: 0 - 4.5 mm Scoring saw tilt: 0 - 45° Scoring saw speed: 7,000 rpm with scoring saw with table extension with table widening with edge guide with miter gauge with additional workpiece support with standard tools for saw blade replacement with operating manual in German without upper dust extraction/hood Location: 49176 Hilter a.T.W., unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: like new (used), Altendorf F35 panel saw, like new Carriage: 320 cm, Blade tilt 0-46° and motorised blade height adjustment, Dwsdpfx Aijyyw Urs Eed Right-side rip fence motorised, adjustable up to 1040 mm, Two-axis scoring unit, electrically adjustable with LED illumination Main motor 5.5 kW; 3 cutting speeds Max blade diameter: 450 mm, Movable arm for easy disassembly of the crosscut table Front support roller dedicated for cutting longer workpieces Year of manufacture: 2025 Ex-demo machine, condition as new

Condition: excellent (used), Year of construction: 2020, Table saw K 540 S, without dust extraction Saw blade diameter max. 400 mm Cutting width 800 mm with full table length Cutting height max. 140 mm Cutting length 3200 mm Dwedpfx Aijyyaifo Eod Angle adjustment manual Note: The dust extraction system shown in the pictures is no longer included in this offer!

Condition: used, Year of construction: 2023, Circular saw Manufacturer: Martin Type: T65 Year of manufacture: 2023 Operating hours: approx. 58 h Table: 860 x 1,370 mm Sliding table length: 3,300 mm Cutting width: 1,350 mm Power: 5.5 kW Speeds: 2,800 / 4,000 / 5,000 rpm Djdpjz U Hh Tofx Ai Ejwd Cutting height: max. 204 mm Saw blade diameter: max. 550 mm Cutting width adjustment: Manual, digital display Height and angle adjustment: Electric The machine table has some surface rust.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, - With sliding table saw carriage Dodpfoym Dzqox Ai Eswd Year of manufacture: 1994

Condition: excellent (used), SCM SI 400 EP panel saw Sliding table 320 cm, Motorized tilting 0–45 degrees Dwodpfey Rzphjx Ai Eod Motorized up/down blade adjustment, Right-side rip fence motorized adjustable up to 1500 mm, Manual scoring unit adjustment, 9 kW motor, 3 blade speeds, Max blade diameter 400 mm, Sliding table fence adjustable for angle Used machine, in very good condition.

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 604374, functionality: fully functional, operating hours: 10 h, power: 5.5 kW (7.48 HP), cutting height (max.): 150 mm, cutting width (max.): 1,350 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, Equipment: CE marking, documentation/manual, saw blade guard, scorer, MARTIN T66 Panel Saw – Showroom Machine, Year of Manufacture 2025, for Sale Dsdpfxe Agnp Ej Ai Eewd Technical Data Machine Type: Panel saw with pivoting saw blade Manufacturer / Model: MARTIN T66 Motor Power: 5.5 kW (main motor) Speed: Continuously adjustable from 1,000 to 6,000 rpm Cutting height at 90° (with saw blade Ø 450 mm): max. 155 mm Cutting height at 46° (with saw blade Ø 450 mm): max. 110 mm Saw blade diameter: 250 – 450 mm (bore Ø 30 mm) Saw blade swivel range: 0° – 46° Rip fence length (cutting length): 3,000 mm Sliding table: Smooth-running, hard-anodized aluminum guide, wear-resistant, self-cleaning, with replaceable cutting edge Cast iron work table: 850×1,100 mm, work height 900 mm Cutting width: 1,350 mm Length stop: Aluminum design, continuous, with error-free fine adjustment and fold-out stop extensions for angle cuts up to 2,000 mm Cross table: Steel, galvanized, with integrated fixed positions for common woodworking angles (0°, 22.5°, 30°, 45°) Net weight: approx. 1,100 – 1,400 kg Dust extraction: Connection Ø 100 mm (on the upper guard) and Ø 120 mm (in the machine stand), minimum flow rate 21 m³/min at 800 Pa Machine Configuration & Equipment Control: Ergonomic control panel at eye level with a 7.0" touchscreen (ConnectTouch) in 16:9 format; electronically controlled cutting height and cutting angle, USB interface, operating hour counter, machine diagnostics Scoring unit: Electrically adjustable 2-axis scoring unit (motor 0.75 kW, 11,500 rpm, saw blade Ø 120 mm, bore Ø 22 mm), pneumatically retractable/extendable, with ProLock quick-change system Safety lighting: Scoring unit lighting SafeLight (optical marking of the danger zone during operation) Parallel fence: Manually adjustable via handwheel with digital display of cutting width on the screen, guide on 4 radial ball bearings, dual-purpose fence ruler (upright or flat) Tool change: ProLock quick-change system for the main saw blade Electricals & Safety: CE-compliant, electronic braking system, dust extraction control, motor protection, undervoltage release, 2 emergency stop buttons, lockable main switch, voltage 3~/400 V / 50 Hz New price: approx. €32,000.00

Condition: used, Year of construction: 1991, power: 5.5 kW (7.48 HP), Table length: 3200 mm Table width: approx. 700 mm Height adjustment via handwheel Motor: 5.5 kW "• Saw blade is not tiltable (F90) • No miter gauge available • Ideally suited for ripping solid wood" Dsdpfxez Rn Efe Ai Eowd Saw blade diameter max. 450 mm Technical data available upon request All information is subject to change without notice.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MJ45-KD3 Sliding Table Saw The CORMAK MJ45-KD3 sliding table saw is a high-class panel saw designed for precise cutting of MDF, HDF, chipboard, laminated boards, ABS, PVC, and solid wood. Thanks to its integrated scoring unit and large sliding table, the machine delivers perfect cuts without chipping or tearing. It is a reliable solution for furniture manufacturers, woodworking workshops, and companies processing wood materials that require high productivity, precision, and repeatability in daily operation. Main Advantages of the Machine High-performance sliding table saw with scoring unit – ideal for cutting furniture boards and composite materials. 5.5 kW Kacperek main motor – provides reliability, durability, and sufficient power for operation with Ø350 mm saw blades. Precision Ø125 mm scoring unit – rotating at 7500 rpm, it eliminates chipping on the underside of panels. Strong welded closed-profile steel frame – ensures maximum rigidity and structural stability. Cutting angle range from 0° to 45° – enabled by a patented tilting system of the cutting unit. Large and stable 3200 × 420 mm sliding table – facilitates precise cutting of large-format panels. Automatic blade lifting system – improves convenience and safety during setup. Construction and Technology The CORMAK MJ45-KD3 panel saw has been designed for intensive industrial operation. The machine is built on a durable steel frame that effectively reduces vibration and improves machining accuracy. Dwodpjvuf Iqofx Ai Eod The cutting unit allows installation of saw blades ranging from Ø250 to Ø350 mm and works together with a precise Ø125 mm scoring blade, making the machine highly versatile for various woodworking applications. High-quality components ensure long-term reliability, easy maintenance, and stable performance even during demanding production processes. Precision and Working Efficiency The CORMAK MJ45-KD3 sliding table saw with scoring unit provides excellent repeatability and clean cutting edges thanks to precise table guidance and high spindle speeds. The main blade can operate at speeds of up to 4800 rpm, while the scoring blade reaches 7500 rpm, ensuring smooth processing of laminated panels and delicate surfaces. With a maximum cutting height of 100 mm, the machine is capable of handling thicker materials, significantly expanding its range of applications. Standard Equipment Main motor 5.5 kW and scoring motor 1.1 kW Cutting unit with tilt and height adjustment Sliding table 3200 × 420 mm Crosscut fence and rip fence with precision adjustment Tilting upper blade guard Integrated dust extraction system with Ø100/80 mm outlets Blade angle and height indicators Complete technical documentation Technical Specifications Parameter Specification Main saw blade diameter / bore 350 / 30 mm Saw blade tilt range 0°–45° Main blade speed 2800 / 4000 / 4800 rpm Scoring blade diameter / bore 125 / 20 mm Scoring blade speed 7500 rpm Work table dimensions 945 × 720 mm Sliding table dimensions 3200 × 420 mm Maximum cutting height 100 mm Cutting width with rip fence 1250 mm Crosscut capacity with crosscut fence 3200 mm Dust extraction outlet under table Ø100 mm Dust extraction outlet on blade guard Ø80 mm Minimum air velocity 20 m/s Minimum air flow 565 m³/h Main motor power S1/S6 5.5 kW / 9 HP Scoring motor power S1/S6 1.1 kW / 1.8 HP Weight 850 kg

Condition: excellent (used), SCM 320cm Linvincibile Si3 panel saw Dwjdpfx Ao Ahm R Toi Eod 320cm carriage, 0-45 degree tilting saw head, motorized tilting and up/down adjustment of the saw blade, right-hand fence with motorized adjustment up to 1500mm, 1.3KW scoring saw, 2-axis, electrically adjustable, 9KW motor, 3 speeds, max. saw blade diameter 450mm, Fence with electronic displays. Used machine, very good condition.

Condition: like new (used), Altendorf F45 panel saw, new 320cm carriage, Dwedpfx Ajzmwalei Eod blade tilt and up-down adjustment with electric motor, right-hand rip fence with electric motor adjustment up to 1340mm, 2-axis scoring saw with electric adjustment 5.5kW main motor; 3 cutting speeds max. blade diameter 450mm, switches in the sliding table Left-hand rip fence on the carriage, adjustable to an angle Year of manufacture: 2025 Machine available from stock.

Condition: used, Year of construction: 2023, machine/vehicle number: Werksüberarbeitungsnummer: WÜA23051204239033, functionality: fully functional, power: 5 kW (6.80 HP), cutting width at rip fence: 1,300 mm, main saw diameter: 550 mm, section length (max.): 3,200 mm, table length: 840 mm, F45 Elmo Drive GM010.0407 Machine height: 910 mm Eye-level control panel Double-sided tilting Max. blade diameter: 550 mm Motor: 5.0 kW (6.8 HP) Vario 2-axis scoring unit with double-sided tilt Djdjymdh Dopfx Ai Ejwd LED lighting Table extension: 840 mm Double roller carriage: 3200 mm Mitre/fence stop DIGIT LD CNC parallel fence: 1300 mm Front support roller DUPLEX 1350 mm (2019)

Condition: excellent (used), Tornado 320cm panel saw 320cm carriage, 0-45 degree tilt, manually adjustable blade height adjustment, electrically controlled scoring saw on the right side, manually adjustable up to 1300mm, scoring saw, manually adjustable main motor: 5.5kW; 3 cutting speeds Dwjdpfez E Hhgex Ai Ejd max. blade diameter: 400mm, angle guide, Excellent condition.

Condition: excellent (used), functionality: fully functional, Equipment: CE marking, documentation/manual, saw blade guard, Robland sliding table panel saw model E3100 Machine in excellent condition, fully functional and ready for use. Ideal for precise and professional processing of panels and solid wood. Dwedpfx Aisy R D Sls Esd ✔ Checked and tested in all its functions ✔ Maintenance performed on mechanical and electrical components ✔ Precise and smooth sliding carriage The machine has been serviced by a company specialized in maintenance and technical support. Contact us for more information or to arrange a demonstration.

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: AE/033731, functionality: fully functional, cutting height (max.): 60 mm, saw blade diameter: 300 mm, rotational speed (min.): 4,650 rpm, overall weight: 3,006 kg, table height: 950 mm, Panel Saw – Technical Specifications Regarding the Casadei Busellato AXO 200 automatic panel saw, its key technical specifications are as follows: Dwsdpfx Aiozkbhzj Esd Parameter Value Cutting length 3800 Max. blade extension 60 mm Main motor power 9 kW Scoring saw motor power 1.3 kW Number of clamps (standard) 6 Main blade diameter 300 mm Scoring saw diameter 160 mm Main blade rotation speed 4650 rpm Scoring saw rotation speed 5850 rpm Work table height 950 mm Zebra GK4 20T label printer The machine is designed for cutting: MDF, particleboard, plywood, laminates, and other wood-based materials. The structural features include a rigid steel frame, a CNC-controlled automatic pusher, an air cushion table that facilitates the movement of panels, and the possibility of expansion with additional clamps and cut optimization. The saw will be in continuous operation on a part-time basis (1/4 of full-time) until the end of October 2026. Assistance will be provided with loading the saw. Disassembly for transport: 500 Euros. Loading onto a truck: 300 Euros.