Used Tape for sale (518)

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Longitudinal seam, folding base, double edge, 4 + 6-point gluing, electronic top gluing system HHS X-tend² with 6 applicator heads, lower gluing system on the left side, mechanical overlap folding with timed/chain alignment, vibrator with compressed air at the feeder, toothed gauge at the feeder, additional center transport in the pre-breaker, pre-breakers on the right and left, kicker, counter, additional center transport in the folding section, Dünki silicone tape dispenser, pneumatic, timed press belt. The machine is in very good condition and can be inspected (disassembled). Max. 1100 mm, min. 126 mm. Dcjdpfx Akjztq Ezj Asp

Condition: used, Year of construction: 2015, operating hours: 35,052 h, Operational machine! Modular Type Multi - Purpose Automated Fabrication Machine sFAB50. Hours worked: 35052 The component feeders: Radial tape feeder pitch 12,7 mm - 3 pcs. Horizontal stacked stick feeder - 1 pc. Djdpfex Nh Rpex Ak Aocp The ball screw of X-axis may need to be replaced in the near future. Ask for specifications!

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 161.40.492, Used Strautmann bale press, type: BalePress 3, serial number: 161.40.492, year of construction: 2020, with tape extraction hook Power supply: 230 V 50 Hz Electrical Power: 0,75 kW Protection class: IP54 Pressing force: 27 kN Press stroke: 580 mm Weight of the machine: 275 kg Transport dimensions (lxwxh):1070 x 754 x 2110 mm (without pallet) 1070 x 754 x 1945 mm Filling opening (wxh): ca. 700 x 450 mm Cycle Time: 27 sec. Bale weight 30 kg Bale size in the chamber (lxwxh)*: 500 x 700 x 500 mm Bale tying: strapping with two twines, PP band ADVANTAGES Easy to install and transport Easy to handle bales Practical emptying of bales Foil/cardboard mode switch Simple and safe operation Stable door locking system Stable guide of the press plate Dedpovvk T Isfx Ak Aocp "D" level security system. Small space required BP3: Bale tying system with open door; BP3CD: tied bales with door closed Solid construction Wheel door lock Ideal for small shops. The Strautmann BalePress 3/3CD is a small, single-chamber baler. At the same time, it is perfectly suited for baling common and smaller quantities of paper, foil, PET bottles and plastic waste and, thanks to its compact design, it can also fit into a very small space. It is clearly the best alternative for our partners with less waste and a waste container with a small footprint. Depending on the pressed material, the 3 ton pressing force can result in a volume reduction of up to 90%. The machine can produce relatively small and therefore easy to handle bales of up to 35 kg. By using it, significant savings in storage and transportation costs can be achieved. Bales are easier to transport and sell than untreated waste. Due to its dimensions, the machine can also fit in a very small space, and because of this, the baling technology is no longer available to our partners who have limited space. Price 3.490 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1975, with new feed carpet, not installed second hand Make Löwer Type RSM 280 S Year of construction 1975 Machine no. 3528 Number of belt units 1 piece Engines 5.5 hp Sanding width approx. 140 / 150 mm Grinding height approx. 120 mm band oscillation tape blow-off Feed speed 6 / 11 / 16 m/min. Band length approx. 1600 mm Dsdpfx Akevwgczj Ascp Band width approx. 160 mm Extraction connection D 100 mm Space requirement approx. LxWxH mm 1400x1000x1600 Weight approx. 650 kg Storage location 97447 Gerolzhofen Handover in the current condition as seen without guarantee and guarantee - free loaded -

Condition: ready for operation (used), Total length: 4950 mm 50 rolls, 290 x 50 mm Ø Dodevf Dqfspfx Ak Aocp One side widening with support: 230 x 80 mm high The other side support with dotted measuring tape: 3000 mm lying on 5 double stands, 870 mm high

Condition: reconditioned (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Dcsdeyyya Djpfx Ak Aep Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 3300 Numerical Control / Software ICOS open (Windows XP) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 7 - 35 Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Milling unit (joint Trimmer) 08.379 (2 X kW 4) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Pressure zone (N.C. adjustment) + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (2 X Kw 0,66) Max 30 m/min Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (1 x Kw 0,5 ca.) 30 m/min Profile Scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18)

Year of construction: 2011, condition: excellent (used), Essemtec Pantera XV Pick-and-Place Machine Year of manufacture: 2011 Excellent condition From small-batch production 0201 components Dsdpfx Aksyxc I Ue Aecp Top-down image processing Intelligent tape feeder (8 to 56 mm) Placement speed: 4,500 cph Easy-to-use graphical software Optical alignment “on the fly” Upward-vision system for component inspection Feeder package: 10 pieces 740i paper 8mm 30 pieces 740 blister 8mm 5 pieces 741 12mm 2 pieces 742i 16mm 10 pieces strip tape feeder

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 15,750 mm, total height: 1,720 mm, total width: 4,250 mm, input voltage: 380 V, overall weight: 3,500 kg, compressed air connection: 6 bar, control cabinet length: 50 mm, control cabinet width: 1,000 mm, warranty duration: 12 months, control cabinet height: 1,350 mm, year of last overhaul: 2036, power: 10.5 kW (14.28 HP), product height (max.): 250 mm, product height (min.): 18 mm, product length (max.): 2,500 mm, product length (min.): 200 mm, Revolutionize Your Flatpack Furniture Line: 100% Automated Packaging with EDDA Lotis Manual packaging is often the biggest bottleneck in furniture production—but it doesn't have to be. Introducing the EDDA Lotis, a game-changing solution specifically engineered for the flatpack (RTA) furniture industry. We’ve designed this system to handle the heavy lifting so you can scale your operations without increasing your headcount. Why industry leaders are switching to EDDA Lotis: Zero Operator Required: Transition to a fully autonomous packaging workflow. High-Speed Output: Process up to 4 boxes per minute (240 boxes/hour) with pinpoint accuracy. Flatpack Precision: Perfect for furniture panels, ensuring secure and professional sealing every time. Zero Manual Setup: The system automatically measures and positions itself for varying box sizes on the fly. Smart Taping: Features triple-head taping for wider furniture boxes and optional auto-labeling. Stop slowing down your production line at the final stage. The EDDA Lotis ensures your products are "ready-to-ship" faster, safer, and more efficiently. Efficiency isn't just a goal; it's a competitive advantage. Dcsdpfxjy Iggmj Ak Ajp

Year of construction: 2025, condition: new, functionality: fully functional, cutting width (max.): 1,500 mm, spindle speed (max.): 700 rpm, spindle speed (min.): 60 rpm, warranty duration: 12 months, Equipment: rotational speed infinitely variable, TGM-1250 Expanded Metal Mesh Machine Expanded Sheet Press is suitable for both plate production and integrated production with Roll tape. Expanded Metal Press is preferred for the best performance electronic products. Expanded Metal Machine is operated with 1 operator control. Materials that our Expanded Metal Machines can process; DKP, HRP, Aluminum, Stainless etc. By entering the quantity and stroke values you want to produce on the control screen, your production will be provided automatically. Without cutting your expanded metal products, you can make hollow production by entering the desired gap dimensions between PLC control screen. Our machines are speed controlled, adjusted according to the material to be processed and the mold. The expanded sheet machine is automatically lubricated by the oil tank as all moving machine elements. (All moving elements of the expanded sheet machine are automatically lubricated with the help of the oil tank) Our Expanded Metal Machines; Suitable for filter wire production, culvert wire production, suspended ceiling mesh production, aluminum facade mesh etc. You can contact us for Expanded Metal Machine For Sale, Expanded Sheet Press For Sale, Baklava Sliced Perforated Press For Sale. Dedpswihwpofx Ak Ascp THRA - 1250 - DECOILER (HYDROLIC) Acts with sensors connected to the expanded sheet metal press or other machines. In accordance with demand, internal clamping system can be produced mechanically and hydraulically. V type hydraulic loading trolley can also be integrated into the machine. We manufacture in 500, 1000, 1250, 1500 mm and different capacities. You can contact us for Roll Forming Machines for Sale, Roll Forming Machines for Sale. TGE-1250 - Expanded Metal Flattener Machine Expanded Sheet Flattening Flattening Machine is suitable for both plate production and integrated production with Expanded Sheet Press. The expanded metal flattening ironing machine can be precisely adjusted on both sides. All of our Flattening-ironing machines are made of special solid steel material and special heat treatments are applied. Irons the thickness of the expanded metal to the raw material thickness of the sheet. Materials that our Expanded Metal Flattening Machines can process; DKP, HRP, Aluminum, Stainless etc. You can contact us for Expanded Metal Flattening Machine for Sale, Expanded Sheet Metal Flattening Machine for Sale and Perforation Flattening Press for Sale with Baklava Slices. It does not damage and wear the roll bands. We also provide custom designs by offering engineering solutions in line with customer demand. TGD - 1250 - Expanded Metal Leveler and Straightening Machine Expanded Sheet Leveller and Straightening Machine is suitable for both plate production and integrated production with Expanded Sheet Press. The expanded metal Leveller and Straightening machine can be precisely adjusted on both sides. All of our crushing-ironing machines are made of special solid steel material and special heat treatments are applied. Irons the thickness of the expanded metal to the raw material thickness of the sheet. Materials that our Expanded Metal Crushing Machines can process; DKP, HRP, Aluminum, Stainless etc.

Year of construction: 2014, condition: used, functionality: fully functional, Type of machine REWER Manufacturing year 2014 Weight 2000 kg Power supply 14 KW Voltage 3x400 V Air pressure 7 bar Rewound material foil: OPP, PET, PVC, OPS, LDPE: 40-50 mkm. cardboard Width of material 500 mm Max. winding diameter 800 mm 1 shaft core 76 Max unwinder diameter 800 mm 1 shaft core 76 Winding speed 0-400 m/min Max weight 400 kg Wind direction right to left or left to right (both side) Lay-on shaft 2 psc. Rewinder and unwinder separate Web guide system with ultrasonic sensor 1 psc. Waste winder with splice table 1 psc. Slitting module rotary knife Control panel touch screen Dodpfx Akokw Ufzj Aocp Adapter diameter 152 mm. 2 psc. Stroboscope with tape control sensor

Condition: ready for operation (used), A Sahm precision cross winder 260E is offered. Traverse width stroke: 300mm, winding speed max.: 500m/min, bobbin diameter: up to 320mm, bobbin volume max.: approx. 22.4dm³, titer range: tapes: approx. 150dtex - 3500dtex, monofilaments diameter: 0.15mm - 0.60mm. Inspection by appointment possible. Djdjyk Hcfjpfx Ak Aocp

Year of construction: 1996, condition: ready for operation (used), A take-up winding machine Sahm for parallel winding is available, traverse width range: 10mm-300mm, max. spool diameter: 400mm, wound material: monofil, max. tape width: 30mm, max. yarn speed: 600m/min, max. winding width: 310mm, max. spool weight: 20kg, tension force range: 10cN-1250cN, winding heads: 90, documentation available, on-site inspection is possible. Djdpfx Ajyttxfek Aecp

Condition: used, functionality: fully functional, EUROMAC MULTI 220/6R NOTCHING MACHINE Maximum cutting length 220 mm Maximum sheet thickness 6 mm Variable cutting angle 30 - 120 WITH PUNCHING MACHINE EUROMAC Multi 220/6R 2-station notching and bending machine Press brake, press brake, cutting machine Cutting capacity steel from 6 mm to 45 kg/mm2 Becu Akmemck Ryo Iswn 4 mm for stainless steel Station I (notching) Notching angle from 60° to 140° (with special knives from 30° to 140°) Dcedpfswqdfxox Ak Asp Knife length 220 mm Table dimensions 950 x 640 - manual angle adjustment by handwheels - Notching angle with built-in knife set from 60° to 140° - hydraulic knife locking upper and lower - automatic cutting gap adjustment - Blank holder - Measuring tapes built into the table - Stop guides with angle adjustment - Operation via foot switch Station II (die bending device) Pressure force 18 tons Table dimensions 950 x 340 Working height 1100 mm - Regular lifting speed - Continuously adjustable stroke limiter - Stroke adjustment up to 30 mm working stroke - Reversible prism with 4 prisms 90°, length = 415 mm - Upper tool 90°, length = 415 mm Motor power 4kW Mains connection 400 volts, 50 Hz OVERALL DIMENSIONS 115X100X125 WEIGHT: 900 KG

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 34400 € 657.04 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 540 mm 540 mm 750x540 mm rund 510 mm, quadrat 450 rund 270 mm, quadrat 250 695 mm 4 kW 0.12 kW 3000 mm 1300 mm 2150 mm 2445 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm Dcodpfxewiqxvo Ak Asp automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame 3° inclined saw band user manual in GERMAN or ENGLISH (the vertical hydraulic clamping shown on the photos ist optional equipment)

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 46400 € 886.24 € Doppelsäulenführung 6800x41x1,3 mm 20-100 m/min 560 mm 820 x 540 mm rechteck 550 x 540 mm rechteck 360 x 540 mm rechteck 550 x 540 mm 880 mm 1.1 kW 4 kW 0.12 kW 3800 mm 1750 mm 2350 mm 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available, additional price) Dcsdjwiqx Aopfx Ak Ajp

Condition: new, Year of construction: 2025, neu 2025 090080 prompt, Zwischenverkauf v Türkei 32100 € 613.11 € 1 3100 mm 4 mm 42 1/min Dsdpewirvpofx Ak Ascp 1,5 ° 750 mm 7.5 kW 2 Stk. 800 mm 450 mm 3700 mm 2300 mm 1350 mm 3730 kg mot. back gauge with digitalreadout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms ball in the table tape measure tilt stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 82900 € 1566.81 € Djdpfx Asynm N Tek Aocp Doppelsäulenführung 8400x54x1,6 mm 20-100 m/min 650 mm 1000 x 600 mm rechteck 660 x 600 mm rechteck 440 x 600 mm rechteck 660 x 600 mm 880 mm 4 kW 7.5 kW 0.12 kW 4400 mm 2270 mm 2660 mm 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH

Condition: new, The Hans Schreiner bandsaw 12-BS350B offers exceptional features in its class. With a cutting height of 235?mm and a powerful motor, it effortlessly meets even the most demanding requirements. The tiltable, heavy-duty cast iron table, robust cast flywheels, precisely guided rip fence, and finely adjustable upper and lower blade guides with side and rear roller bearings ensure excellent stability and precise cutting results. The 12-BS350B is also available with an optional stand and mobility kit. Technical specifications: Motor 1.1 kW, 400 V Band saw roll diameter 350 mm Cutting width 345 mm Cutting height 235 mm Table size 546 x 400 mm Table tilt 0-45° Belt length 2630 mm Tape width 6 to 20 mm Belt speed 7/14 m/sec Weight 96kg Dodpfx Aox H Ucgek Ajcp Advantages and properties: - Cast iron wheels for exceptionally smooth operation - Heavy-duty cast machine tables and components for maximum stability and precision - Optimized cutting speed tailored for woodworking - Easy blade change for quick and tool-free replacement - Fast retooling for efficient workflow with changing tasks - Extremely user-friendly thanks to well-thought-out design and intuitive handling - High-quality, unique design features included as standard - Mobile on request with optional stand and transport kit - Minimal space requirements – ideal for smaller workshops - Excellent price-performance ratio in its class - CE-certified – compliant with current safety standards Option: Base with chassis 230V for same price

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902028859, empty load weight: 5,660 kg, maximum load weight: 29,340 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,700 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, Chassis, Semi-trailer, Transport Company Steel welded construction in reinforced design, only 2 longitudinal members as double T-beams with steel/diamond-plate between the longitudinal members, kingpin plate with replaceable 2" kingpin. Mudguard for tail lights. 8 pairs of lashing eyes screwed or welded to the frame, at the manufacturer's discretion. 24 tons, 2-speed support legs, single-sided operation, with straight lower part, without thrust compensation. Chocks with holder. Aluminum side impact protection. Galvanized steel underrun protection. Half-shell fenders with anti-spray flaps according to EC. 1 spare wheel holder for 1 spare wheel, with wheel fastening kit. Dcedpfxsza Anvj Ak Aop 1 storage box recessed between the longitudinal members. 8 pieces of wood rack supports, at the manufacturer's discretion, screwed to the frame, each with 2 extendable wood racks from 1800 to 2800 mm, 7 tons per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift and lower valve, safety cable on the axles. 1st axle automatic lift axle, including forced lowering and starting aid, operated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Axle spacing staggered 1410/1310 mm (combined transport) up to 44 tons total weight. Wheels and Tires 385 / 65 R 22.5" at the manufacturer's discretion. Steel rims, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. Axle load recognition via EBS-CAN bus signal, for display on the dashboard in the cab; the truck must be correspondingly prepared, no truck installation (no calibrated scale). 2 non-interchangeable coupling heads at the front, without connecting cable. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! "Safe Parking" Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Front wall / corner posts Steel / grid front wall, approx. 2300 mm high, screwed to the frame. Approval / Signs Country of approval: Germany. Type approval according to EC 2007/46. Prepared for single-row license plate holder. Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Warning sign according to ECE - 70. Paint Frame: DB 7350 Novagrau (dark grey) Support legs: Black coated. Front wall: Hot-dip galvanized.

Year of construction: 2020, condition: like new (used), Magnetic tape, overbelt magnetic separator, magnetic filter, lifting magnet, overbelt magnet Permanent overbelt magnetic separator TYPE PEM1800 1800x1000x400mm ===== 4x ring screw for suspension Magnet dimensions: 800x500x180mm PU conveyor belt with hard cover, matt black Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-65 Three-phase gear motor GEMOTEG 1.1KW Cladding: RAL 5015 Dcedpehun Uuefx Ak Aep Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: excellent (used), C.N.C. WORKING CENTER with 5 axes (X-Y-Z-C-5) routering, boring, cutting and edge banding Goose-neck machine - Front emergency carpets Safety cabin (enclosure) of the working head Numerical Control Type ICOS CNC - Software IMAWOP Dcsdpfshu U Nxjx Ak Asp Working table with pods and rails (No. 8 rails x mm 1400) LED system (on the rails) for the vacuum pods positioning Automatic Tools Changing System (Store with No. 18 positions) Useful working area (X - Y - Z) mm 4000 x 2100 x 300 Useful working area (X -Y - Z) in edge banding mm 4000 x 1800 x 60 Nr. 2 Working areas - Vacuum pump / capacity (m3/h) 140 Motorized carpet to evacuate the wastes from the working process Separate electric and command cabinet - Total power installed Kw 32 Working group (top head) Nr. 21 Independent vertical boring spindles (4 X Kw 1,2) Nr. 1 Vertical Electro-spindle HSK F63 ROBOT (Kw 16) Edge Banding group (ready on board) with Glueing Unit (Hot Melt) VT 100 Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Edge coils supporting unit (Nr. 2 reels) OPTIONALS: Circular saw aggregate (diam. mm 200) Combined aggregate (Flush-Trimming/Scraping) Drilling Aggregate (with 4 horizontal boring spindles)

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides Dsdpfxoh Eld Ej Ak Aocp * edge-free zone on both sides for tape guidance in the incline Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Dcsdpfoh Ellzox Ak Ajp Connection 220/400V, 50Hz protection class IP54

Condition: new, Year of construction: 2026, 27 HP petrol engine (LONCIN, auto start) Capacity 764 cc The maximum dimensions of the workpiece 910 x 4800 mm The dimensions of the cutting tape are 4576 x 40 x 0.9 mm Belt speed 17 m / min Dsdpfxjhg Ahnj Ak Aocp Tooth pitch 22 mm Wheel diameter 508 mm Manual feed Dimensions 4064 x 1778 x 1800 mm Extension 6000 x 1010 mm Transport dimensions 2080 x 750 x 830 mm Weight 722/782 kg Option transporting wheels

Condition: used, Injector Inject Star PI 75 Tape width: 61.5cm Machine dimension in cm: Width: 100 Lenght:210 Height: 228 Djdsh R T Avspfx Ak Ascp Delivery time: 30 working days after advanced payment