Used Telescopic Band for sale (6,250)

Condition: new, Year of construction: 2026, load capacity: 4,000 kg, lifting height: 20,000 mm, total length: 7,900 mm, Telescopic forklift JCB 540-200 Drive Diesel Dsdpfx Aoyq S Nqeftocd Year built 2026 Lifting height (mm) 20,000 Lifting weight (kg) 4,000

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, fork length: 1,070 mm, total length: 5,120 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm Djdpfx Afoyq S Nkotecd ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: excellent (used), Year of construction: 2005, Saw band dimensions: 4400 x 34 x 1.1 mm Dcsdpoyrc Aqofx Afted Cutting range at 90 degrees: round – 335 mm Cutting range at 90 degrees: flat – 500 x 335 mm Cutting speed: 15–150 m/min Machine weight approx.: 1,550 kg

Condition: used, Year of construction: 1999, functionality: fully functional, Cutting range at 90 degrees: round 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 90 degrees: flat 400 x 260 mm Cutting range at 45 degrees right: round 250 mm Cutting range at 45 degrees right: square 240 x 240 mm Cutting range at 45 degrees right: flat 240 x 260 mm Cutting range at 45 degrees left: round 250 mm Cutting range at 45 degrees left: square 250 x 250 mm Cutting range at 45 degrees left: flat 290 x 250 mm Cutting range at 60 degrees: round 160 mm Cutting range at 60 degrees: square 160 x 160 mm Cutting range at 60 degrees: flat 110 x 260 mm Cutting range at 60 degrees left: round 190 mm Cutting range at 60 degrees left: square 190 x 190 mm Djdsyrcy Aepfx Aftjcd Cutting range at 60 degrees left: flat 210 x 190 mm Space requirement approx. 1700 x 2000 x 1600 mm Machine weight approx. 960 kg

Condition: excellent (used), FULL LINE OF 4 SIDE SIZING-MILLING & EDGE BANDING Composed of the following machines: Dcodpfx Ajun N Dloftod A) W06027 1st Double Side Sizing & Edgebander "IMA" Mod. Combima II / 440 /A / R3 B) Turning Station 90° C) W06028 2nd Double Side Sizing & Edgebander "IMA" Combima II / 190 / B / R3

Condition: used, total height: 2,980 mm, total length: 2,000 mm, total width: 1,600 mm, Weight: 2.000 kg Price: On request - Documentation available: No - CE certificate present: No - Saw direction: vertical - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1220 - Max. cutting to feed roller opening [mm]: 210 - Max. cutting to stop opening [mm]: 390 - Max. cutting width to column [mm]: 650 - Max. total opening [mm]: 600 - Max. cutting height [mm]: 380 - Table width [mm]: 1150 - Table length [mm]: 1200 - Max. band saw width [mm]: 120 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 250 - Options: Tiltable fence - Voltage [V]: 400 Dsdpfxjyna Dwj Aftjcd - Current consumption [A]: 45 - Fuse [A]: 63 - Power [kW]: 25.0 - Transport dimensions: 2000mm x 1600mm x 2980mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 1998, total height: 2,550 mm, total length: 1,800 mm, total width: 1,800 mm, Price: On request - Details: - └ Description: Shaft of the drive rollers is loose with the machine - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: AT10548 - Saw direction: vertical - Main motor power [kW]: 18.5 - Wheel diameter [mm]: 900 - Max. cutting to feed roller opening [mm]: 240 - Max. cutting to stop opening [mm]: 230 - Max. cutting width to column [mm]: 270 - Max. total opening [mm]: 470 - Max. cutting height [mm]: 350 - Table width [mm]: 900 - Table length [mm]: 760 - Max. band saw width [mm]: 80 - Feed roller type: Manual - Extraction port diameter [mm]: 180 - Options: Tiltable fence - Voltage [V]: 400 - Current consumption [A]: 32 - Fuse [A]: 40 - Power [kW]: 19.5 - Transport dimensions: 1800mm x 1800mm x 2550mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dcsdpfoym Rt Hjx Aftjd Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, load capacity: 3,500 kg, lifting height: 7,690 mm, fuel type: diesel, mast type: telescopic, power: 95 kW (129.16 HP), motor manufacturer: CHANGCHAI, gearing type: automatic, battery voltage: 12 V, overall weight: 7,300 kg, empty load weight: 7,300 kg, total length: 5,670 mm, color: yellow, Equipment: cabin, pallet forks, Gunter Grossmann Telehandler GG635 Telescopic Loader Telehandler GG635 Telehandler The GG635 is an advanced telescopic loader, engineered for intensive tasks in agriculture, construction, and logistics. It combines a robust build, a precise hydraulic system, and a powerful CHANGCHAI engine, delivering reliability, high efficiency, and optimal operating comfort under demanding conditions. Dcedpoynb H Tofx Aftsd CHANGCHAI 4G33TC Engine – Power and Durability The GG635 is powered by an inline, four-stroke, turbocharged, water-cooled engine – the CHANGCHAI 4G33TC – with a displacement of 3.26 liters. The engine delivers 70 kW at 2400 rpm and a maximum torque of 330 Nm at 1680 rpm, ensuring dynamic and smooth performance with low fuel consumption and long component life. Hydrostatic Drive and High-Performance Hydraulic System The hydrostatic drive via cardan shaft allows precise maneuvering in difficult terrain. The axial piston pump with sensor achieves a capacity of 175 L/min at a working pressure of 280 bar, guaranteeing fast and precise operation of attachments and maximum operational efficiency. Safety and Stability Its robust construction and operating weight of 7,300 kg ensure exceptional stability under all conditions. Wet brakes and high-quality components guarantee reliability, safety, and user comfort during heavy-duty use. Maximum lift capacity: 3,500 kg Bucket capacity: 0.9 m³ Fork length: 1,200 mm Operating weight: 7,300 kg Manufacturer: CHANGCHAI Model: 4G33TC Type: Inline, water-cooled, turbocharged, four-stroke Rated power / speed: 70 kW / 2,400 rpm Max torque / speed: 330 Nm / 1,680 rpm Displacement: 3.26 L Dimensions: 715 × 660 × 795 mm Brand/Model: XCMG WA1102 / WA2102 Static axle load: 18 T Brakes: Wet brake Maximum output torque (N·m): 2,600 Brand/Model: XCMG TM043II Rated input power: 97 kW Maximum input torque: 800 Nm Maximum input speed: 3,500 rpm Drive: Hydrostatic, via cardan shaft Speed: 0–11 / 35 km/h Working pump: Axial piston pump with sensor Capacity: 175 L/min Pressure: 280 bar Fuel tank: 120 L Hydraulic oil tank: 180 L A Total length with standard bucket: 5,670 mm A Total length with pallet forks: 6,030 mm B Total length without attachment: 4,650 mm D Wheelbase: 3,005 mm F Height to top of cab: 2,373 mm J Overall working height with bucket: 7,690 mm K Maximum bucket hinge pin height: 7,000 mm L Dumping height, bucket (telescopic extended): 6,750 mm L Dumping height, forks (telescopic extended): 6,900 mm L1 Dumping height, bucket (telescopic retracted): 4,450 mm L1 Dumping height, forks (telescopic retracted): 4,610 mm M Maximum turning height (telescopic extended): 6,250 mm M1 Maximum turning height (telescopic retracted): 4,000 mm N Reach, bucket (telescopic retracted): 590 mm N1 Reach, forks (telescopic extended): 3,570 mm N2 Reach, forks (telescopic retracted): 1,020 mm O Digging depth: 29 mm P Overall height: 2,320 mm Q Track width: 2,000 mm S Ground clearance: 360 mm T Maximum turning radius with bucket: 5,571 mm T1 Maximum working radius with forks: 4,258 mm U Outside turning radius: 4,829 mm V Inner turning radius: 2,204 mm

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 2500, with automatic handling. Composed of the following machines: X04004A) Double Loader "BARGSTEDT" TBH 500/D/30/14 with central motorised roller conveyor X04004B) Turning station (90°) lengthwise to crosswise "HOMAG" Mod. TDR31/25/12 X04004C) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel X04004D) Seperation Station "BARGSTEDT" X04004E) Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFR 620 / 19 / QA / 25 X04004F) 1° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004G) 2° Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 500 D X04004H) Turning station (90°) crosswise to lengthwise "HOMAG" Mod. TDR 51/25/12 X04004I) Motorized belt transfer "HOMAG" TR 10/70/12 X04004L) Splitter "HOMAG" Mod. FPR620/04/15/PS/LQ to split in two parts the unique panel Dsdpelikvhefx Aftecd X04004M) Double Stacker "BARGSTEDT" Mod. TSP 420/40/30/12 BA with central motorised roller conveyor

Condition: excellent (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings mm 1,3 Dcjdpsu Ekbnsfx Afted Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 266 / 2400 (option 3000) Distance (center-axes) of the Disappearing Dogs (mm) 540 (prepared for 270 mm) Numerical Control ICOS OPEN Feeding speed (adjustable) max. 60 m/min Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue) 283.205 Band Pressure zone. Edge coils supporting unit (No. 2 reels) Servo-drive Snipping (end-cutting) unit 08.42 (KW 0.2 x 2) 0°-25° (max. working speed 50 m/min) Fine Trimming unit 08.055 (KW 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Spraying Unit (for polishing liquid) Free space (for possible addition of a scraper) Buffing unit 08.617 (Kw 0.18 x 2)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Djdpewz Ic Aofx Aftecd Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Dcjdpfx Afeunrwnoted Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 240 / 2500 Numerical Control PC 22 Adjustable feeding speed (m/min) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 (hydro) Hogging Units KD 11 (2 x Kw 8,1) hydro EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "C" Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit MF 20 (2 x Kw 0,55) 20° Corner Rounding unit (Contour Trimming) FF22 (4 x Kw 0,4) max 35 m/min Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 11 Free space Dsdpfjlikydjx Aftocd

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Dcsdpfx Ajifnxxsfted Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Condition: unchecked Equipment and technical data: - Edgebanding thickness: 0.3-5 mm - Workpiece thickness: 6-45 mm - Minimum workpiece width: 60 mm - Minimum edge length: 200 mm - Feed rate: 11 m/min - Electrical connected load: 3.4 kW - Extraction port: 100 mm - Air requirement: 550 m³/h - Glue system: cartridge 1906 - Trim saws, front and rear: 1975 - Radius milling unit, top and bottom: 1942M Djdoyq T Inspfx Aftscd - Radius scraper, top and bottom: 1929 - Buffing unit: 1941 K - Machine length: 3675 mm - Machine width: 1470 mm - Machine height: 1200 mm Weight: 950 kg Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), CATALOGUE NUMBER 7603 Djdpfx Afsyarcietscd TECHNICAL SPECIFICATIONS - automatic sharpening speed - tooth counter - suitable for wide band - grinding wheel size: 240 mm - motor power: 0.12 kW, 0.75 kW, 400 V - dimensions (L/W/H): 3600x1600x1500 mm - weight: 140 kg ADVANTAGES – made in Poland – with tooth counter – for wide band – unpainted – used sharpening machine – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2025, Joining unit: Yes Edge thickness: maximum 3mm Workpiece thickness: from 8mm - 50mm Workpiece width: minimum 110mm Glue basin: granular, quick change basin Dodpek Eai Ujfx Aftocd cross-cut shear: yes cross-cutting / flush sawing: yes Milling station: chamfer / radius corner copying: yes Flat - scraper: yes Radius scraper: Yes Buff: Yes Non-stick spray unit: Yes Infeed ruler adjustment: manual workpiece thickness adjustment: manual power input: 5 kW machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Condition: as good as new (ex-display), Year of construction: 2022, Roller diameter: 700 mm Stand projection: 670 mm cutting depth: 430mm Table tiltable: yes 0 to + 20°. Table size: 700 x 930 mm belt speed: 18 m/min Motor power: 3 kW / 400V Dcodpfx Afshpl Tqjtod Motor brake: yes / automatic Suction connection: 2 x 100mm Machine length: 1260 mm Machine width: 750 mm Machine height: 2230 mm Weight: 420 kg

Condition: new, Year of construction: 2025, Roller diameter: 533 mm Stand projection: 510 mm Dcedpfx Ash Ekx Seftjd cutting depth: 350mm table swiveling: yes -0 to + 45° Table size: 750 x 530 mm belt speed: 1400m/min Motor power: 4,1 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 120mm Machine length: 998 mm Machine width: 530 mm Machine height: 1987 mm Weight: 273 kg

Condition: as good as new (ex-display), Year of construction: 2022, Roller diameter: 400 mm Stand projection: 390 mm Cutting depth: 280mm Table tiltable: yes 0 to + 20°. Table size: 500mm x 450mm belt speed: 18 m/min Motor power: 1,5 kW / 400V Motor brake: yes / automatic Dodpfx Ashpl Tmoftocd Suction connection: 2 x 100mm Machine length: 780 mm Machine width: 585 mm Machine height: 1735 mm Weight: 125 kg

Condition: as good as new (ex-display), Year of construction: 2022, Roller diameter: 600 mm Stand projection: 585 mm cutting depth: 370mm Table tiltable: yes 0 to + 20°. Table size: 890 x 620 mm Djdpohpl Tfjfx Aftocd belt speed: 18 m/min motor power: 2,2 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 100mm Machine length: 1100 mm Machine width: 670 mm Machine height: 2050 mm Weight: 295 kg

Condition: as good as new (ex-display), Year of construction: 2025, Roller diameter: 800 mm Stand projection: 785 mm cutting depth: 500mm Table tiltable: yes 0 to + 20°. Table size: 1130 x 800 mm Dcodpfx Aehpl Tueftjd belt speed: 18 m/min Motor power: 4 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 100mm Machine length: 1590 mm Machine width: 880 mm Machine height: 23900 mm Weight: 620 kg

Year of construction: 2022, condition: new, Motor power: 1,1kW / 230V Cutting area: 100mm x 145mm feed: stepless Dodpfx Asgulr Aoftscd saw band speed: 22 / 31 / 55 m/min Saw band dimension: 1638 x 13 x 0.65 mm Cutting angle: -45° to 60 Dimension: 1085mm x 498mm x 978mm Weight: 78kg

Year of construction: 2025, condition: new, Motor power: 1,1kW / 400V Cutting area: 100mm x 145mm Coolant device: Yes Dcedpfxjha Nz Uj Afted Feed: stepless Saw band speed: 45 /90 m/min Saw band dimension: 2480 x 27 x 0.9 mm Cutting angle: 0° to 60 Dimension: 1400mm x 685mm x 1235mm Weight: 185kg

Condition: excellent (used), Year of construction: 2024, operating hours: 77 h, mast type: telescopic, lifting height: 21,000 mm, fuel type: gasoline, Drivetrain Make of engine: Honda Weights Empty weight: 750 kg Functional Lifting capacity: 200 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Max swing of arm in degrees: 180 Transport dimensions (LxWxH): 5,9x1,35x1,5 Production country: DE Dcodeymx D Hspfx Afted Additional information Please contact Vink Machinery for more information Klaas Toplight 21 Ladder Lift * 2024 * Petrol powered * 21-meter working height * 77 working hours * 200 kg lifting capacity * Foldable platform sides * Remote control * Automatic controls up and down * Ladder rotates 180 degrees * Equipped with additional support legs * Net weight 750 kg