Used Test Machinery for sale (79,694)

Condition: used, This listing is for the Bio-Rad VARIANT II hemoglobin testing system The unit is in full working condition and is ready for immediate use The Bio-Rad VARIANT II is a high-volume, fully automated hemoglobin testing system. It is primarily used in clinical laboratories to measure HbA1c for diabetes monitoring and to detect -thalassemia and other hemoglobin disorders Automated Sampling: It accepts barcoded primary specimen tubes directly, eliminating the need for manual sample preparation. Gbodpsyt Idvofx Al Uou Multi-Analyte Testing: It can switch between different testing methods, such as a 3.5-minute program for HbA1c and a 6.5-minute program for thalassemia. Variant Detection: It is designed to provide accurate results even in the presence of common hemoglobin variants like HbS, HbC, HbD, and HbE. Data Management: Results and chromatograms are managed through Bio-Rad’s Clinical Data Management (CDM) software, which can interface with a lab's information system (LIS) for real-time reporting

Condition: used, Trailers, construction equipment trailers -Handover: in its current condition as inspected Godpfx Aen Uy Awsl Uebu -Note: Vehicle registration document missing, electrical wiring missing/damaged -Trailer: Construction machinery trailer -Loading area: 2220/1085/H420 mm, rim height 410 mm -Overflow device: Tap type ABV25. 1DZKE 2010 to 2500 kg -Support load: 100 kg -Dimensions: 4175/2030/H980 mm -Empty weight: 650 kg

Condition: used, 10 containers dedicated to hydrogen testing L 6058 x W 2438 x H 2896 mm Ready to be connected to cooling/electrical/H2-N2 systems Cooling capacity: 100 kW Gjdpfxozgv Rvj Al Ujbu Electrical capacity: 40 kW (can be increased to 100 kW) Bench automation software provided (Horiba STARS) Durability testing Characterization testing EU declaration of conformity available

Condition: used, RMS Vibration exciter / vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts A used vibration exciter from RMS Regelungs- und Messtechnik is for sale. The device is explicitly sold solely as a source of spare parts. Functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Further technical specifications on the nameplate are partially damaged and not completely clearly legible. Equipment: RMS vibration exciter SW 6005 Mounting plate with threaded holes Lateral pneumatic suspension elements Lifting/lowering device Control and connection housing Transport/lifting eyes Base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Maintenance of existing vibration testing systems Supply of spare parts and sub-assemblies Retrofit and repair projects Gbjdpfez Iqh Ajx Al Uju Scope of supply: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Accessories as shown in the pictures Weight: approx. 700 kg Condition: Used Optical condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for function, operational readiness, or completeness. Shipping or freight shipping possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, RMS Vibration exciter / Vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts. For sale is a used vibration exciter from RMS Regelungs- und Messtechnik. The device is explicitly sold solely as a source of spare parts. Functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983 Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Speed: 1.2 m/s Gsdpfx Aljz Iqigo Uobu Acceleration: 100 g Weight: approx. 700 kg (estimated) Equipment: RMS vibration exciter SW 6005 Mounting / clamping surface with threaded holes Pneumatic vibration isolation Lateral spring elements Pneumatic components Operating and connection housing Cooling / air connection with hose Transport / lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Maintenance of existing vibration testing systems Supply of spare parts and subassemblies Reconstruction and repair projects Scope of delivery: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling / air hose as shown in the pictures Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by phone.

Year of construction: 2002, condition: good (used), Vötsch VTSR 7034/S Climate Testing Chamber, -70 to +180°C Manufacturer: Vötsch Type: VTSR 7034/S Test chamber volume: 335 liters Climate testing chamber Temperature range: -70 to +180°C Supply voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated current: 22 A Rated power: 12.5 kW Refrigerant (cooling): R 404 A Refrigerant (heating): R 23 Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Year of manufacture: 2002 Gedeuuif Nspfx Al Usbu TK-11 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 1999, Nema Corrosion Test Chamber for Salt Spray Tests Manufacturer: Nema Type: NSN 300 Rated voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Water pressure: 2-8 bar Power consumption: 5.6 kW Salt solution: NaCl: 50 External dimensions (W x D x H): 3200 x 1200 x 1900 mm Internal dimensions of the test chamber (W x D x H): 3100 x 1000 x 880 mm Weight: 390 kg You can find more items in other sizes – new and used – in our shop! Gedpfx Asu Ecrxjl Uobu International shipping costs available upon request!

Condition: like new (used), Year of construction: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar modules and photovoltaic modules Testing of electrical and mechanical safety Support for product development, design, and quality control Early detection of potential problems during the development phase Quality and safety control Gbjdpfx Aeh Rvh Ssl Uou Endurance testing stand Temperature control Mobile on rollers Pockets for forklift access 400 VAC, 3-phase, 50 AMP IR: 10,000 Amp Year of manufacture: 2012 Weight: 1400 kg Dimensions (H x W x D): 2900 x 1700 x 1900 mm You can find more testing equipment – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), functionality: fully functional, Complete machine park for sale, consisting of: Holzher machine park in like-new condition (in operation since 6/2024), consisting of: Tectra 6120 Dynamic beam saw, automatic panel storage system Storemaster 5110 (approx. 12x18m), Nextec 7705 nesting machining center, Weinig Dimter Opticut S60 optimizing miter saw (year of manufacture 2009), including waste conveyor (new, in operation since 6/2024). Nestro dust extraction system (in operation since 06/2024), consisting of: filter tower 11 kW + 7.5 kW (15,000 m³/h), Gjdpfjzh Hw Ajx Al Uebu briquetting press, shredder, piping for all machines, various pipe diameters. Mobile dust extraction unit Holzkraft RLA160, 2x mobile dust extraction units ASA2553 or similar. 2x Renner compressors, each 7.5 kW (1x new, in operation since 06/2024). 1x Ayen multiple drilling machine, special construction with 2.5m stop rail. 1x Cesab B625 electric forklift, 2.5 tons (year of manufacture 2014), 2x electric high-lift pallet trucks Toyota/BT (year of manufacture), 3x electric high-lift pallet trucks Cesab including initial lift (year of manufacture 2025). Various work tables, templates, pallet racks, material carts, etc. BeA various nailers & staplers. Various electric power tools, vacuum cleaners from Festool, Bosch Professional, etc. Bench drill Stürmer. Festool table saw. Bosch large panel miter saw on stand. EUR 530,000,- net (Total price EXW (ex works) for self-dismantling/collection). If you are seriously interested, we can gladly provide pictures and details of the individual items.

Condition: used, DÜRR DÜRR testing station for adhesive applicators DÜRR testing station for adhesive applicators, including (5 robot-guided adhesive applicators) DÜRR testing station (custom-built by Dürr) for the automotive industry Weight: 1200 kg Type: DÜRR testing station for adhesive applicators Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone. Gbjdez Nflyjpfx Al Ueu

Condition: used, functionality: fully functional, Year of construction: 1985, Flatbed trailer CTC SPA RP26S Registered in 1985 Gedjz Nivcopfx Al Usbu 3 axles Tires in 40/50% condition Length: 9.68 m, width: 2.5 m, payload: 195 quintals Double hydraulic ramps Good condition Available immediately WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: excellent (used), Vötsch VC 0150 Climate Test Chamber 0°C - +90°C Manufacturer: Vötsch Type: VC 0150 Climate test chamber Voltage: 230 V Rated power: 1.5 kW Volume: 1540 liters Temperature range: 0°C to +90°C Humidity: 10% to 98% Refrigerant: R 134a Dimensions: W 950 x D 1100 x H 1475 mm Microprocessor controller List price: €19,500 Gedpeuuikfefx Al Uobu KK-09 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. Based on these cyclical loads and accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving carriage All-round grids in the moving carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber can be used as a temperature cycling device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Gbedpfowbdv Sjx Al Uju Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Refrigerating unit: Water-cooled Weight: approx. 940 kg Year of construction: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Gsdpfox Exmtjx Al Ujbu Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Year of construction: 2004, operating hours: 34,304 h, condition: excellent (used), Weiss climate testing chamber -70 to +180 °C, WK-1000/70 climate testing cabinet Climate chamber manufacturer: Weiss Umwelttechnik GmbH Type: Climate chamber WK-1000/70 Test chamber volume: 990 liters Temperature range: -70 to +180 °C Humidity: 10 to 98 % Mains voltage: 400 V 3/N 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R 404A used climate chamber Microprocessor-controlled control and monitoring system SIMCON/32 32-bit technology Godpfxjph U Aye Al Uebu Graphical display of setpoint and actual values Digital display of setpoint and actual values for temperature and relative humidity (%) Digital input for temperature (°C) and relative humidity (%) Integrated programmer Program memory Manual and automatic operation Fault diagnosis system Operating hours: 34,303.8 h Year of manufacture: 2004 climate chamber Weiss Dimensions of the test chamber: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Width: 1,400 mm Depth: 1,900 mm Height: 1,970 mm You can find more climate chamber items – new and used – in our shop! International shipping costs available upon request!

Condition: used, D+P FLC300.3-D+P Industrial Electronics, Used Used industrial component from Dosier- und Prüftechnik GmbH, model FLC300.3-D+P. Gbedpfx Alez N Hhpo Uou Manufacturer: Dosier- und Prüftechnik GmbH Model: FLC300.3-D+P Condition: Used Operating voltage: 24 V DC Function: Control, monitoring, and testing technology for industrial applications Quantity: 2

Condition: used, Year of construction: 2001, functionality: fully functional, year of last overhaul: 2017, total width: 1,300 mm, total length: 7,000 mm, operating pressure: 90 bar, total height: 3,000 mm, empty load weight: 7,000 kg, number of previous owners: 2, Bruks root reducer / stem reducer – stem lengths up to 6m, 100 m/min feed rate, fully overhauled in 2017. Gbjdpfezufkzsx Al Uou I am offering a powerful and reliable Bruks root reducer, which is ideal for use in log yards and sawmills. The machine underwent a complete overhaul in 2017. The machine was operated in a system with a feed rate of 100 m/min. Price on request.

Condition: used, functionality: unexamined, Ferwood Code: RU0011646 - Manufacturer Code: K6343K0947 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Gsdjwtnimepfx Al Ujbu

Condition: used, functionality: unexamined, Ferwood code: RU0011649 - Manufacturer code: K6343K0946 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service; please contact us. Gbsdpfxswtnnpj Al Usu

Year of construction: 2018, condition: excellent (used), Vötsch VT³ 7012 S2 Temperature Shock Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Year of Construction: 2018 Machine Type: Temperature Shock Test Chamber / 2-Chamber Shock Test System Test Chamber Volume: 125 liters For sale is a used Vötsch VT³ 7012 S2 temperature shock test chamber with a 2-chamber system and programmable touch panel control. The system was developed for rapid and abrupt temperature changes and is particularly suitable for Environmental Stress Screening (ESS), environmental simulation, electronics and component testing, research and development, as well as quality assurance. The test specimen is transported between the hot and cold chambers via a vertically moving transport carriage. Technical Data: Temperature Range, Hot Chamber: +50 °C to +220 °C Temperature Range, Cold Chamber: -80 °C to +70 °C Test Chamber Volume: 125 liters Number of Chambers: 2 Max. Test Weight / Carriage Load: 50 kg Refrigeration Unit: water-cooled Mains Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 10 kW Rated Current: 25 A Refrigerant: Refrigerant 1: R449A Refrigerant Quantity: 1.70 kg GWP: 1,397 CO₂ Equivalent: 2.37 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Refrigerant 2: R23 Refrigerant Quantity: 1.27 kg Gbedpfxjzzazus Al Ueu GWP: 14,800 CO₂ Equivalent: 18.80 t Max. Low Pressure: 22.5 bar g Max. High Pressure: 25 bar g Standby Pressure: 14 bar g Dimensions: Test Chamber (W × D × H): 470 × 650 × 410 mm External Dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required Room Height for Operation: approx. 2,450 mm Equipment: 2-chamber temperature shock system Vertically moving transport carriage Programmable touch panel control CONTROLPAD for status display Observation window Test chamber lighting Cable gland Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / Remaining time display USB and Ethernet interfaces Application Areas: Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Life and stress tests Transport Data: Dimensions (L × W × H): approx. 2,350 × 970 × 1,985 mm Weight: to be determined Transport by freight forwarder Condition: Used Optical condition as shown in the pictures. Scope of Supply: Vötsch VT³ 7012 S2 temperature shock test chamber Touch panel control Equipment and accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Vötsch VT 7012 S2 Temperature Shock Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7012 S2 Machine Type: Temperature Shock Test Chamber / Shock Test Chamber For sale is a used Vötsch VT 7012 S2 temperature shock test chamber with hot and cold chambers, as well as a motorized moving test platform. The system was developed for professional temperature cycling and temperature shock testing and is suitable for material testing, electronics and component testing, research and development, and quality assurance. Technical data: Temperature range, hot chamber: +50 °C to +220 °C Temperature range, cold chamber: -80 °C to +70 °C Temperature deviation, time-related: ±1.0 K Temperature deviation, spatial: ±2.0 K Heating rate, hot chamber: approx. 11.0 K/min Cooling rate, cold chamber: approx. 3 K/min Heating rate, cold chamber: approx. 2.0 K/min Test chamber dimensions (W × H × D): 470 × 410 × 650 mm Cable gland: Ø 67 mm Load between the shelves: max. 40 kg Total load of the moving platform: max. 20 kg Gbodpjz Ehrgofx Al Uju Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A On-site fuse: 32 A slow-blow Compressor power: 2 × 3 kW Dimensions: External dimensions (W × D × H): approx. 975 × 2,115 × 1,675 mm Test chamber dimensions (W × H × D): 470 × 410 × 650 mm Weight: approx. 1,000 kg Equipment: Hot chamber Cold chamber Motorized moving test platform Programmable controller Manual operation Automatic operation Shock test operation Observation window Test chamber lighting Cable gland Ø 67 mm Water-cooled design Operator terminal Signal light Transport data: Machine (W × D × H): approx. 975 × 2,115 × 1,675 mm Weight: approx. 1,000 kg Condition: Used Optical condition according to the pictures. Scope of supply: Vötsch VT 7012 S2 temperature shock test chamber Operator terminal Original operating manual Accessories according to the pictures Availability: upon agreement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Technical details: traction force: 250 kN control: SCHENCK HYDROPULS PSB dayligth: 1000 - 1200 je nach Spannwerkzeug /acc. clamp.tool mm piston stroke: 180mm mm A servo-hydraulic leaf spring testing machine with Series 65 digital electronics is designed for testing leaf springs used in commercial vehicles, railway vehicles, and industrial applications. A hydraulic actuator applies defined loads while force, displacement, and, if required, strain are measured. Typical tests: ·Static spring characteristic (force-displacement curve) ·Fatigue and endurance testing ·Cyclic load testing ·Service life testing ·Tensile and compression testing Godpfozi R R Aox Al Uobu ·Production quality control *

Condition: good (used), Year of construction: 1985, functionality: fully functional, arm reach: 13,000 mm, load capacity: 1,250 kg, track width: 3 mm, Equipment: cabin, crane, For sale is a Wolf-Wagen, formerly used by a school. Gbjdpszau Smjfx Al Uju It has few operating hours and is in very good condition! Sold on behalf of a customer! - Miter saw - Measuring device - Cut-to-length system - Gripper

Year of construction: 2023, condition: excellent (used), 1 used universal testing machine / tensile testing machine / material testing machine Manufacturer: Zwick Roell Type: Retroline 50 KN Modernization/inspection by ZwickRoell: 01/2023 with testControl II measuring, control, and regulating electronics. Maximum testing force: 50 kN 2 × wedge-type specimen holders, ZwickRoell 8404R, 50 kN Specimen holder part no. 1006757 Flat specimens: 0–22 mm, depending on the set of jaws Round specimens: Ø 4–19 mm, depending on the set of jaws Opening width with jaws: 22 mm Gbodez Eyqnopfx Al Uju Connecting pin: Ø 36 mm Weight per specimen holder: approx. 11 kg suitable for static and cyclic tensile tests extensive original ZwickRoell documentation inspection report available very well-maintained condition Application areas: Tensile tests and material testing on metals, plastics, and other materials; suitable for quality assurance, testing laboratories, research, development, and training.

Condition: excellent (used), Year of construction: 2019, overall weight: 7,400 kg, Equipment: documentation/manual, Surface and contour measuring machine. Model: T8000 Wavemove ZKG. Used for measuring engine blocks. More information available via email. Gedpfxsz Hx Eyo Al Uobu