Used Testing Press for sale (21,698)

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Djdpoxdahyjfx Ap Iowc Machine weight approx. 800 kg

Condition: new, Year of construction: 2026, Actually one showroom machine available. Very robust machine with high pressing force Dedjxfwdjpfx Ap Iswc - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Output (depending on material): up to 200 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Dsdpsz D Tnwefx Ap Iowc Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 183610114, functionality: fully functional, stroke length: 1,200 mm, empty load weight: 1,500 kg, working width: 3,000 mm, working height: 1,710 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Max. clamping width: 3,000 mm Max. clamping height: 1,710 mm Max. clamping depth: 100 mm Number of cylinders: 4 pcs Cylinder stroke: 1,200 mm Horizontal and vertical cylinders: Separately controlled MACHINE DETAILS Voltage: 400 V Current consumption: 3.5 A Fuse rating: 16 A Main motor power: 1.5 kW Connected power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 2,880 mm Unladen weight: 1,500 kg Dedszzbb Njpfx Ap Iowc Number of transport packages: 1 pc EQUIPMENT Remote control

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG75/D K/RT50 Pressurized water temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial applications in plastics processing, especially for the temperature control of injection molds and other process tools. Manufacturer's serial number: 102010170001, Year of manufacture: 2009 Temperature: max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Operating overpressure: max. 6 bar Pump capacity: 100 l/min Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooling unit) Dodpfx Asz Au Hbjp Iewc Pump motor power: 1.5 kW Continuous sound pressure level

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Working length 3000mm Working width 1300mm Automatic material loading Glue application system Shelves heated with oil to 130C Top pressure force 57t Side pressure force 9t Dsdpfx Apjv Nhx Uo Iewc Year of production 2001 CE certificate

Condition: excellent (used), total length: 3,500 mm, total width: 1,300 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport length: 4,350 mm, transport width: 1,600 mm, transport height: 2,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Dsdpfx Asxxpgbop Iowc Piston diameter: 80 mm Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Power supply: 400V Dedpfxez E A I Ae Ap Iewc Year of production: 1994 Baldwin alcohol dampening Control panel Documentation and additional elements included.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 16232, overall weight: 19,400 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 4,400 kg, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 60 l, Equipment: documentation/manual, Avermann MPC 16 P/E – 16 m³ | Discharge hatch | Fully rubber-lined For sale: Avermann MPC 16 P/E compaction container, built in 2010, with a capacity of 16 m³. Dodpez Eqzqsfx Ap Iswc This robustly built Avermann compaction container is specifically designed for applications involving the processing of moist or wet waste streams. The machine is equipped with a discharge hatch and is fully rubber-lined on both the front and rear sides. This makes this compaction container particularly suitable for situations where good sealing is important and where, for example, wet waste, industrial waste, or other moist waste streams are processed. The container is equipped with a hook lift system on the front, making it suitable for transport with a hook arm system. Technical data: Brand: Avermann Type: AVOS MPC 16 P/E Year of construction: 2010 Serial number: 16232 Capacity: 16 m³ Power supply: 400 V / 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP54 Maximum working pressure: 200 bar Own weight: approx. 4,400 kg Permissible total weight: 15,000 kg Hook lift system on the front Equipped with a discharge hatch Front and rear sides fully rubber-lined Robust industrial construction Special features: Due to the combination of the discharge hatch and the rubber lining, this machine is very suitable for processing wet and moist waste streams. The large feed opening makes it easy to quickly feed larger quantities of waste. The compaction container is in used condition and has signs of wear consistent with its age and use. Technically, it is a heavy-duty and robustly built Avermann compaction container for professional use. Suitable for, among others, industry, food companies, manufacturing companies, catering, recycling and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information, price or technical questions. Keywords: Avermann, AVOS, MPC16, MPC 16 P/E, compaction container, 16m3, waste compactor, container compactor, wet waste, discharge hatch, rubber sealing, rubber-lined, hook lift, waste compaction, recycling, compactor.

Condition: excellent (used), Technical specifications: Djdpfx Apsz E A Suo Iewc Working length: 4100 mm Frame width: 3650 mm Press force: 220 tons CNC control: OPERATOR OPII graphic Color screen size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back gauge Overhang: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: New AMADA tools Condition: The machine is in very good overall condition. Retrofit in January 2026. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Dsdpjv Sthgjfx Ap Iewc Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), machine/vehicle number: B1507I0168, functionality: fully functional, operating hours: 5,687 h, input voltage: 400 V, input current: 51 A, input frequency: 50 Hz, pressing force: 230 t, stroke length: 445 mm, overall weight: 17,200 kg, Equipment: CE marking, CNC hydraulic press brake TRUMPF TruBend 5230 (type B23), year 09/2019 – available immediately. Machine currently in production, very little use for its age: – Machine operating hours: 5,687 h – Slide cycles: 229,247 (recorded on the control panel on 09/28/2026) Dedpfx Apjz E R U Dj Iewc Features: – 5-axis machine, CNC crowning – Bending force: 2,300 kN (230 tons) – Stroke: 445 mm – TRUMPF TouchPoint TruBend control panel – Weight: 17,200 kg – Connection: 400 V / 50 Hz, 33 kVA – CE marking TRUMPF tooling (upper and lower tools) available as an option. Location: Replonges (01), France. Inspection under power possible by appointment. Price upon request. Dismantling and transport can be arranged upon request.

Condition: excellent (used), Year of construction: 1960, functionality: fully functional, machine/vehicle number: V-65R, cutting force: 100 t, total width: 1,400 mm, total length: 6,000 mm, total height: 2,100 mm, overall weight: 8,300 kg, pressure: 30 bar, Arnold baling press SP-100 Djdpfez Az Exsx Ap Ijwc In very good condition. Regularly maintained and in continuous operation until today.

Condition: new, Year of construction: 2026, machine/vehicle number: P784, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 230 t, stroke length: 315 mm, operating speed: 180 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 500 mm, clearance between the columns: 2,600 mm, oil tank capacity: 350 l, overall weight: 20,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The all-rounder with extra power! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the construction of the control cabinet, takes place in-house. By using state-of-the-art technology, combined with many years of experience in the field of forming technology, the HQPB series enables you to perform bending operations at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, coupled with user-friendly operation, allows us to meet the highest requirements and achieve maximum precision in the bending process. Press force: 2,300 kN (230 t) Working length: 3,100 mm Clearance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower bed above floor: 850 mm Rapid traverse max.: 200 mm/s Dwodpfez Hnzkjx Ap Ijc Pressing speed max.: 9.8 mm/s Retraction speed max.: 150 mm/s Positioning accuracy of ram: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 18.5 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 17.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Side stands with two pressure cylinders, above-floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper beam Proportional control valve, electronically monitored cylinder synchronization Double upper beam guide, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: narrow table, single V (13 × 20) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Crowning Centrally adjustable, hydraulically-dynamically, CNC-controlled Active control loop keeps the lower bed in the zero position Constant bending angle > Back gauge 4 axes X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger distance min. 50 mm > Control Delem DA 66S 24″ touchscreen on the swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment Air conditioning in the control cabinet LED work area lighting at the rear Remote diagnostics for Delem control and Pilz PLC

Condition: new, pressure 8,0 kN stroke 40 mm throat 90 mm Working height from to 50 - 200 mm table surface area 120 x 160 mm weight of the machine ca. 22 Kg dimensions 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE!!! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle Dsdpfx Apjfv Avkj Ijwc • Hand lever arranged in a user-friendly manner, return via spring

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm Dsdefv Awajpfx Ap Iewc

Condition: new, pressure 500 t column daylight 600 mm stroke 600 mm table surface area 3500 x1500 mm 600 mm feed down 8 mm/sec feed up 16 mm/sec travel on the bed 2200 x 900 mm total power requirement 30 kW weight of the machine ca. 28 t 2. STANDARD EQUIPMENT Dwodpfx Ajfv Awhep Ioc FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: used, pressure 2 t throat 150 mm Djdpfstzv Hmex Ap Iswc stroke 150 mm table surface area 310 x 250 mm power requirement 2,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press - with table base - various press accessories

Condition: used, Year of construction: 2015, pressure 30 t stroke 300 mm daylight between the columns 700 mm Dwodpfxsy Umbwe Ap Ioc dayligth 850 mm 140 mm diameter of piston 60 mm table surface area 700 x 390 mm weight of the machine ca. 0,35 t dimensions of the machine ca. 1,2 x 0,8 x 2,2 m Workshop Press - Movable cylinder - 2 support prisms - Emergency stop device

Condition: new, Year of construction: 2026, pressure 100 t throat 250 mm stroke 400 mm dayligth 500 mm table surface area 800 x 500 mm Control Siemens S7 hole in the table 0 mm table height over floor 500 mm ram surface 800 x 500 mm working feed 10 mm/sec speed down 110 mm/sek speed up 160 mm/sek power requirement 11,0 kW weight of the machine ca. 5,5 t dimensions 1,9 x 1,7 x 2,9 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 220 mm Dsdpfx Apjyfwywj Iewc - Auxiliary cylinder diameter 50 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking

Condition: as good as new (ex-display), Year of construction: 2023, Adira E-Brake BB base configuration: Adira Electric Press Brake Dedpfx Aoz A Thhsp Iswc - AD 75 control system (Y1/Y2, X, R, Z1/Z2) with 3D graphical programming and automatic sequence optimization, (BG1 for BB3515 and BG2 for 5020) - Bluedrive technology - Standard table with basic 60 mm Promecam dies - Promecam quick-release upper tool holder - 2 front supports on a 500 mm guide rail - IRIS safety light curtains - CE safety compliance - Standard tooling kit - Robot interface

Condition: new, Year of construction: 2026, operating hours: 2 h, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, corn straw...) animal feed... This is a complete system (compact system) which is built on a base frame and consists of the following components: Storage container for raw material 4 m³, including agitator Inclined mixer for raw material including level sensors and fully automatic moisture dosing Dedpfxovlz H Rj Ap Iswc Dosing container for pressing aids (e.g. corn starch) Dosing screw for optimal material feeding of the press (speed-controlled) Press 15 kW, with horizontal round die, discharge chute, temperature monitoring, overfill protection..... Conveyor belt for pellet removal, discharge height approx. 2.5 m Drum sieve for dust removal and cooling of the pellets The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! The system is designed and prepared for the operation of a second press! Price excl. VAT! !!!!! Attention!! we are constantly looking for sales and service partners (worldwide) !!!!!

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 230 V, total width: 830 mm, total length: 870 mm, total height: 1,710 mm, overall weight: 150 kg, operating temperature: 60 °C, compressed air connection: 6 bar, Lorenz FMP04 Filter Test System, 2021 – EN 143/149, ISO 16900-3 – €47,900 net, negotiable Test respirator filters and masks (FFP and medical face masks) in-house instead of paying for lab time: the Lorenz FMP04 automatic filter test system measures filter penetration and breathing resistance in a single run, with results available within seconds. New price currently: approx. €95,000 net. Your price: €47,900 net (negotiable), ex works (EXW) Hamburg. One unit only, lightly used. What you get: • Standards-compliant testing according to EN 143, EN 149, ISO 16900-3, ISO 17420-2, and NIOSH 42 CFR Part 84; all parameters adjustable for customer-specific tests. • Two laser aerosol photometers (upstream and downstream) with automatic reference calibration and auto-ranging across six orders of magnitude. • Aerosol generator using paraffin oil heated to 60 °C, automatic oil supply from external reservoirs, software-based switching between standards. • Quick-change filter holder, Ø 112.8 mm (100 cm²), face velocity 5–40 cm/s, automatic flow reversal; canister filter adapter plate. • Extension for differential pressure testing per EN 14683 Annex C.4 (surgical masks) with adapter plates (2.5 cm bore); a €1,836 option in 2021. • 15" full-HD touchscreen, integrated PC, filter database, test history, CSV export, test reports with your logo, graphs for loading tests; USB and network. • Flow 8–300 l/min, efficiency 0.0001–100 %, breathing resistance 5–1,000 Pa (manufacturer data for the FMP04 series). • Scope: all adapter plates and accessories are included. Specifications: built 2021, approx. 150 kg, 870 × 830 × 1710 mm, 115/230 V. Requires compressed air ≥ 6 bar, ≥ 50 l/min (oil-, water- and particle-free). Please note: service is due. Dwedpfx Aoz Inf Sjp Ioc The unit has seen little use. Service and recalibration are due and are already reflected in the price. Why act now? Inspection and a test run in Hamburg can be arranged. Sold ex works (EXW) Hamburg. Inquire today: response within one business day. Price negotiable. Location: Hamburg, Germany.

Condition: new, stroke: max. 500daylight: max. 1000motor: 15performance of pump: 65oil filling: 120messurements (LxWxH): 1300 x 3300 x 2950weight approx.: 6000pressure: 300Speed: vorlauf 8 / rücklauf 13,5Electro-hydraulic workshop press 300 t- Anti-rotation device for the cylinder piston - Pressure regulating valve - Speed control throttle valve - Emergency stop safety device - Noise level: 75 dB - Soft starter - Two-hand control panel - Linear measuring device for stroke adjustment with digital display - Pressure gauge - Digital pressure display - Emergency stop buttons on the control cabinet and on the two-hand control panel - Hydraulic tank including motor mounted at the lower side next to the frame Dwodpfx Asz Hgb Asp Iec - Hydraulic lines with check valves - Table manually height-adjustable and secured with 3 locking pins

Condition: as good as new (ex-display), Year of construction: 2026, Machine to be exhibited at EUROBLECH 2026: Trade fair – special price! Press force: 1600 kN Stroke: 15 – 110 mm Stroke rate: 30 – 65 /min Ram adjustment: 95 mm Table: 1,100 x 700 mm Ram: 900 x 500 mm Installation height: 460 mm Weight: 12,000 kg Connection: 15 kW Includes: Dwedsz Hkh Hjpfx Ap Ijc - Fully automatic stroke adjustment, hydraulic overload protection, motorized ram adjustment - Frequency inverter, central lubrication, light curtain - Control system: SIEMENS S7/1500