Used Thread Rolling Head for sale (18,111)

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulically controlled three-roller bending machine Make BIKO, model B3 2021 Technical specifications: Number of Reels: Three Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 215 mm Side roller diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000mm Height: 1,100 mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 13 mm Bending capacity (full working width) 9 mm from pipe diameter 1075 mm Rolling capacity (full working width) 9 mm Bending performance (full working width) 7 mm from pipe diameter 280 mm Standard equipment: Double linear guide system for the roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls Kdedpfx Ahecuxp Toyeg cone bending device Safety trip wire with emergency stop and CE certification Mobile control panel

Condition: new, functionality: fully functional, Year of construction: 2026, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Sheet thickness bending at 750 mm diameter 4 mm Kdjdpecuxpqsfx Ahysg Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Machine with CE certification and documentation

Condition: used, Year of construction: 2004, Manufacturer : Nova (SERAC) Model: NS 574/4 Year : 2004 Type : volumetric filling by 2 pistons Number of heads: 4 Volume : 500 to 7400 ml Volume per mm of stroke: 18.14 ml Product: liquid / semi-liquid for flasks, bottles, cans External conveyor control Neck detection Available filling formats Kdjdpfsx R Auxsx Ahyog Filling heads available Recovery tank Drain hoses installed on photos. Power: 0.45 KW Air consumption: 140 Nm3/H at 6 bars

Condition: used, Manufacturer : Stoppil Model: EC6050 Type : Automatic linear filler   Kedpsx R Atnefx Ahyodg Number of heads : 6 Product : Liquid or semi-liquid Capacity : 500 ml / 5 L Flowmeters : electromagnetic Tank : 316 stainless steel Poppet valve   Cylinders: inlet / outlet Collection bin Conveyor 1 additional set of heads Documentation available

Year of construction: 1994, condition: used, Dosing pump 2 heads Year : 1994 Ideal for corrosive products Large batches of spare parts Kodpfx Ahex Rz Sioyedg Motor EX

Condition: good (used), dividing head, dividing head, gear, gears lathe, spur gears, spur gear -Gears: 12 pieces -Teeth: 27 to 120 Z see photo parts list -Tooth width: 15 mm -Shaft mount: Ø 18 mm -Dimensions: see photo parts list Kdedex R S Axjpfx Ahyeg -Shipping/Price: complete -Transport dimensions: Ø 153 x 180 mm -Weight: 5.2 kg/total

Condition: good (used), Glass fibre, glass fleece, laminate, glass fibre material -Manufacturer: Spheretex, sphere core glass fleece material for laminating Kedpfjx R S Arjx Ahyodg -Type: sphere core SBC IP Thickness 6.0 mm Width 100 cm 1 roll -Type: BÜFA -Advanced Core CLM Thickness 6.0 mm Width 127 cm 1.27 m² 3 rolls -Price/Delivery: complete -Transport dimensions: 600/400/H1280 mm -Weight: 12 kg

Condition: good (used), Glass fibre, glass fleece, laminate, glass fibre material -Manufacturer: Spheretex, sphere core glass fleece material for laminating -Type: sphere core S Thickness 3.0 mm Width 100 cm 3 rolls -Type: sphere core SP Thickness 3.0 mm Width 100 cm 1 roll -Type: sphere core PSI Thickness 3.0 mm Width 127 cm 1 roll -Price/Delivery: complete -Transport dimensions: 1100/700/H1290 mm -Weight: 14 kg Kdsdpfxsx R Sz Uo Ahyjg

Condition: excellent (used), dividing head, dividing head, gear, gears, lathe -Gears: 18 pieces module 1.5 -Teeth: 127/120/89/78/60/58/56/48/45/44/39/38/33 Kodpfsx R Sxmsx Ahyedg -Tooth width: mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Shipping/Price: complete -Dimensions: Ø 193 to Ø 53 mm -Weight: 14.7 kg/total

Condition: good (used), dividing head, dividing head, gear, gears lathe, spur gears, spur gear -Gears: 71 pieces module 1.5 Kdsdpox R Swijfx Ahyeg -Teeth: 33 to 127 Z see photo parts list -Tooth width: mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Shipping/Price: complete -Transport dimensions: 550/370/H150 mm -Weight: 68 kg/total

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Kodpfsihvtgox Ahyjdg

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, ZAX12372 Single-head saw machine with pneumatic tilting of the heads • Head tilt up to 22.5° right / left (Automatic positioning at fixed angles 22.5° - 45° - 90°) • Head tilt at intermediate degrees, with manual positioning (mechanical stop) • Full guarding • Three-phase motor 400V 50Hz 4kW (inverter-driven) • Saw blade rotation speed 1900 rpm Kdodpfxoya H Dze Ahyjg • Provision for chip and fume extraction • Simultaneous start of the vacuum with the start of the saw blade • Saw cut lubrication by spray mist • Widia saw blade Ø 700 mm • 2 pneumatic horizontal clamps • 2 pneumatic vertical clamps • Set of service tools -> optional FOM length stop

Condition: new, Year of construction: 2024, thread dia. bis M 16 mm turning speeds 0 - 600 U/min thread M5 - M16 working area 2050 Rmax. Kdsdou Ag Rajpfx Ahyeg working area 500 Rmin. table surface area 900 mm engine output 3,0 kW weight ca. 250 kg

Condition: used, Year of construction: 2021, plate thickness 2.5 mm Kdsdpfx Aox A H T Tehyjg throat 260 mm distance between roll centers 92.0 mm weight 295 kg range L-W-H 1200 x 700 x 1200 mm Equipment: - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: as good as new (ex-display), Year of construction: 2022, 1550 mm 2,0 mm Kdedpfxoxcuxds Ahyog 1,5 mm roll diameter oben 90 mm 560 kg 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head Kdjdpjg N Nl Isfx Ahysg - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, M27, M30, M33, M36 Substructure 900 x 600 x 875 mm

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds Ksdsxaaf Rjpfx Ahysdg - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

Condition: as good as new (ex-display), Year of construction: 2018, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm weight of the machine ca. 50 kg dimensions of the machine ca. 560 x 220 x 500 mm Manual bead bending machine Description: - Heavy-duty and stable cast iron construction - Adjustable lower shaft Kedpjraqhxefx Ahyjdg - Special steel shafts - Built in accordance with CE standards

Condition: new, thread dia. M6 - M24 mm turning speeds 200 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Kdjdpfxsg N Nl De Ahyjg Electric tapping machine / 4450124SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting the parameters via touch display on the swivel arm - Both manual and automatic switching from forward to backward to reaching the entered Incl. 1 each GT24 M6, M8, M10, M12, M14, M16, M18, M20, M22-24 tapping chuck Substructure 900 x 600 x 875 mm

Condition: used, Year of construction: 2017, sheet width 2070 mm plate thickness 25 mm pre-bending 18 diameter of upper rolls 320 mm side roll diameter 260 mm diameter of lower rolls 320 mm 26 kW 8100 kg 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark Kdsdewc D Dxepfx Ahyjg

Condition: used, Ball valve, ball valve internal thread -Pressed brass -Internal thread: 2 "inches Kdsdjdz A Tfepfx Ahyog -full: passage, full ball -Number: 63x ball valves available -Price: per piece -Weight: 2.1 kg

Condition: good (used), Barrel lifter, barrel handling, barrel gripper, barrel lifter, barrel handling, barrel gripper -Drum lifter with: gripper head Kdodpfxsd Aghke Ahyjg -Load capacity: kg -Suitable for: 1 x 200-L steel bung drums, steel lid drums, rolling hoop drums -Reception: 410 mm -Automatic opening when: setting down the barrels -Number: 2x grippers available -Price: per piece -Dimensions: 340/305/H900 mm -Weight: 47 kg

Condition: used, Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting apparatus -Tapping chuck: MK3 mount -Cutting capacity: M3 -M12 Kdsdpjphup Ujfx Ahysg -Bore: Ø 10 mm -Dimensions: Ø 58 x 213 mm -Weight: 1.9 kg

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drill head, drilling gear Kededym D Tepfx Ahyodg -Joint multi-spindle head -Max. x drill -7x drill built-in collet: mm -min. Distance drill: mm -Weight: 11.3 kg Articulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once.

Condition: used, Clamping device for table band saw, wood band saw, firewood saw, automatic band saw, material positioning, saw band rollers, saw band roller -Saw band roll: made from metal saw Amada HA-400 W -Diameter: 595mm -Shaft: Ø 50 x 70 mm -Receptacle: M16 x 2 -Dimensions: Ø 595 x 193 mm -Quantity: 1 piece available -Weight: 51kg Kdodpfegal Avex Ahyeg