Used Versatile 900 for sale (6,102)

Condition: excellent (used), Year of construction: 2019, For sale are the following functional and well-maintained oil burners: 1. Burner type: WM-L10/3-A, MULTIFLAM Output: 200 - 900 kW 17-75 kg/h Design: T-3LN Year of manufacture: 2019 2. For sale is a functional and well-maintained oil burner from Weishaupt, model WM-GL10. It was only used with oil, therefore it does not have a gas line. Burner type: WM-L10/3-A Output: 110 - 1000 kW 15 - 84 kg/h Design: ZM-T Year of manufacture: 2007 3. For sale is a functional and well-maintained oil burner from Weishaupt, model RL3-A. Burner type: RL3-A Output: 120 - 775 kW 10 - 65 kg/h Design: ZMD Dcjdpfxey Uvhtj Acpsn Year of manufacture: 2002

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, with Dungs gas piping DN 50 Dcsdpfxszdku Rs Acpjn Burner type: WM-G10/3-A Design: ZM-LN Year of manufacture: 2011 Output: 125-900 kW

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: hydraulic, stroke rate (max.): 8 1/min, throat depth: 355 mm, punching force: 92 t, punching diameter: 30 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, table length: 500 mm, table width: 500 mm, overall weight: 2,200 kg, total length: 1,860 mm, total width: 790 mm, total height: 1,900 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 12 months, Equipment: CE marking, documentation/manual, electrical contact length stop, emergency stop, foot remote control, notching unit, Metal Technics Polska MTP IW90 hydraulic ironworker – NEW – versatile steel processing in one machine A practical solution for metal fabrication workshops, steel construction and maintenance departments. The MTP IW90 combines punching, flat-bar and plate shearing, section cutting and notching in one hydraulic machine. The supplied bending attachment also enables short plate bending below 500 mm width. Several operations can be carried out at the same workstation, reducing handling between separate machines. TECHNICAL DATA • Year of manufacture: 2026 • Punching force: 900 kN • Punching capacity: Ø30 mm hole in 20 mm steel • Maximum cutting thickness: 20 mm • Maximum cutting length: 480 mm • Material tensile strength: up to 450 N/mm² • Shearing angle: 8° • Ram stroke: 80 mm • Nominal stroke rate: 8 strokes/min • Throat depth: 355 mm • Main motor: 5.5 kW Dcsdpoz Hy I Nofx Acpen • Supply: 400 V, 50 Hz, three-phase • Machine dimensions (L × W × H): 1860 × 790 × 1900 mm • Brochure gross weight: 2200 kg Maximum cutting thickness and maximum cutting length are separate limits; the permissible combination depends on the material and operation. STANDARD EQUIPMENT • Punch and die tooling • 500 × 500 mm work table with chamfering provision • 1000 mm electric back gauge / contact length stop • Foot pedal controls with stop buttons • Schneider electrical components • Hydraulic system with HUADE valves and a Japanese-brand oil pump • Bending / press attachment and reducing sleeve PRICE AND DELIVERY €10,970 net, excluding VAT, EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Delivery to any destination in Europe – shipping cost calculated upon request (not included in the machine price). The model-specific inspection report records a successful factory inspection on 20 August 2026. Photos show the supplied model and its equipment. Technical capacities are based on the supplied documentation; tooling and the material being processed determine the applicable operating limits.

Condition: used, This listing is for a Morgan Mini Monitor Series 900 Geiger Counter Djdjxzgz Ispfx Acpocn Over the years Mini Monitor 900s have earned an excellent reputation for reliability, performance, versatility, ease of use and value for money. The 900 series continues to be a popular choice in education, research, medicine, industry and amongst environmentalists and enthusiasts.

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 1572, functionality: fully functional, operating hours: 5,500 h, power: 55 kW (74.78 HP), cutting height (max.): 1,000 mm, cutting width (max.): 1,200 mm, control type: PLC-controlled, overall weight: 20,000 kg, Complete Mebor wood sawing line Included: - HTZ 1200 Plus, maximum sawing length 9m, Optifast 10 control system - multi-blade VR 900 with 3 movable heads - MLD Logdeck log loader - 2x RCM 800 with left/right sorting - 2x CCP transport chains All in good condition, available for inspection in working order. Dcsdpfx Aoz Eadbjcpon

Condition: ready for operation (used), Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 9731, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 420 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, quill stroke: 75 mm, quill travel distance: 75 mm, quill diameter: 55 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 7 m/min, table length: 900 mm, table width: 458 mm, table height: 900 mm, type of input current: three-phase, total height: 1,890 mm, total length: 3,970 mm, total width: 3,740 mm, overall weight: 2,300 kg, input voltage: 380 V, space requirement width: 3,740 mm, space requirement length: 3,970 mm, space requirement height: 1,890 mm, milling spindle length: 75 mm, year of last overhaul: 2015, grinding spindle motor power: 59 W, Equipment: documentation/manual, rotational speed infinitely variable, Control system: HEIDENHAIN TNC 407 Travel range: X = 600, Y = 400, Z = 420 mm Spindle speed range: 20 – 4000 rpm Djdpfszyp Twsx Acpjcn Gear stages: 3 Tool holder: SK 40 Arbor stroke: 75 mm Spindle motor: 5.9 kW Feed rate range: 1 – 5000/6000 mm/min (manual/program) Rapid traverse rate x, y: 7 m/min Rapid traverse rate z: 6 m/min Clamping area: 900 x 458 mm Weight: approx. 2300 kg With coolant system, electric handwheel, various tools (without cabinet).

Condition: excellent (used), CATALOGUE NUMBER 6582 TECHNICAL DATA - max. width of the workpiece: 920 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW Top: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers Bottom: - 3 slip rubber rollers - conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar - pneumatic brake Dcjdpfxozw Dchj Acpsn - diameter of the dust extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg - Made in Germany - 2 units - Used grinder, very good condition Net price: 24,900 PLN Net price: 5,791 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2402-10, working width: 900 mm, overall weight: 4,000 kg, input voltage: 400 V, input frequency: 50 Hz, power: 20 kW (27.19 HP), workpiece width (max.): 900 mm, grinding wheel diameter: 1,100 mm, grinding width: 900 mm, Equipment: documentation/manual, We are selling our Timesavers 42-Series-900-WRD (belt sander + Scotchbrite deburring wheel) in a dry version. The machine is in perfect working order and is in very good condition, both visually and technically. Since our dry dust extraction system is permanently integrated into the building and will remain here, we are providing a BRAND-NEW 7.5 kW wet collector – this means the machine is immediately ready for operation without its own extraction system and is also suitable for aluminum/mixed material processing. Dsdpfsz Hifwsx Acpjcn Technical data: - Working width / conveyor belt: 900 mm - Belt sanding unit (W): belt width 900 mm - Scotchbrite deburring wheel (D): Ø 1,100 mm - Year of manufacture: 2008 - Serial number: 2402-10 - Connected power: 20 kW, 400 V / 50 Hz - Weight: approx. 4000 kg Scope of delivery: - Timesavers 42-Series-900-WRD - 7.5 kW wet collector, new/unused - New conveyor belt - Existing sanding belts - Documentation Availability: from mid-November 2026. Until then, the machine will be in production and can be inspected and tested with your own parts at any time while powered. Reservation possible with a deposit. Collection from Bodnegg (88285, near Ravensburg). Loading with a forklift is possible. Transport can be arranged upon request.

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter: 1,000 mm, controller model: Siemens 840 D, tool length: 500 mm, number of slots in tool magazine: 44, TECHNICAL DETAILS Working area Swing diameter: 1,000 mm Dcsdpfx Acez Hmc Tepsn Swinging diameter: 1,000 mm Z-axis travel: 900 mm MACHINE DETAILS Control system: Siemens 840 D Tool holders: SK 50, VDI 60 Tool magazine: 44 positions Tool weight: max. 35 kg Tool length: max. 500 mm

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, cutting width (max.): 900 mm, total height: 2,600 mm, total length: 1,700 mm, total width: 1,800 mm, overall weight: 800 kg, saw band length: 4,600 mm, saw band width: 25 mm, table width: 1,800 mm, throat depth: 900 mm, working height: 800 mm, Band saw for cutting wood and other wood-based materials, and more. Cast iron construction. Working wheels 900 mm. Cutting width 900 mm, cutting height 800 mm. Cast iron construction, weight 800 kg. Condition after complete overhaul. Equipped with saw blade. Covers included. Dcodpsxl Svxsfx Acpjn

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 ST. gebr. Spritzgiessmaschine mit Roboter Hersteller: NETSTAL Typ: SYNERGY2400-900 Dcsdpsz Iz Hcsfx Acpon Baujahr: 2004 Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Schneckendurchmesser: 50 mm Spritzteilgewicht: 377g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Roboter WITTMANN

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 ST. gebr. Spritzgiessmaschine mit Roboter Hersteller: NETSTAL Typ: SYNERGY2400-900 Baujahr: 2004 Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Dcsdpfxez I Agdj Acpon Schneckendurchmesser: 50 mm Spritzteilgewicht: 377g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Roboter WITTMANN

Condition: good (used), IML DA 900 Rigid Box Automatic Wrapping Machine This machine is practically new. Year of manufacture: 2016. Application: Wrapping veneer on a box. Made in Italy. Dcodszw Ty Nspfx Acpsn This automated machine is designed for forming solid board boxes by wrapping veneer on a solid board box. This is the latest version of the machine, with a PLC controller. Technical specifications: Max size: 430mm x 350mm x 120mm Min size: 60mm x 60mm x 10mm Version thickness: 100-175gsm Weight: 900kg Power supply: 230V The set includes two tool palettes for producing standard boxes. The molds are primarily made using 3D printing technology.

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231674, A high-quality, 3-axis precision machining center, the MIKRON MILL P 900 from GF Machining Solutions, built in 2017, is for sale. TECHNICAL DATA General Data Manufacturer: MIKRON / GF Machining Solutions Model: MILL P 900 Machine type: Vertical 3-axis precision machining center Year of manufacture: 2017 Number of axes: 3 Spindle operating hours: approx. 1,530 hours CNC control: FANUC 31i-B TECHNICAL DATA Travel X: 900 mm Travel Y: 600 mm Travel Z: 450 mm Rapid traverse X/Y/Z: 30 m/min Clamping area: approx. 1,000 × 600 mm Max. table load: 1,000 kg Max. spindle speed: 20,000 rpm Tool holder: HSK-A63 Spindle power: up to approx. 36 kW Torque: up to approx. 120 Nm Tool changer: 30-position Tool holder: HSK-A63 Djdpfjz Ipnnox Acpjcn Machine concept: 3-axis gantry machining center The machine can be inspected on site by appointment. Subject to change, errors and prior sale!

Condition: good (used), Selling CRATHERN, PERONDI IA630, NA 900. Dcodpfoud Axgjx Acpsn

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, *ENGEL DUO 1800H/1800M/900 WP 2FCLS – Combi-M (2K)* Year of manufacture: 2015 Dcodpfxsz Az Iae Acpon Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Sequential valve-gate control (cascade): 16 circuits 8 Hot runner control: 48 zones Robot VIPER 40 Laser Conveyor Belt

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Line components: 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm Dcodpfjzxup Isx Acpsn 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Drive power 15 kW Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW

Condition: excellent (used), Catalog number: 7649 TECHNICAL DATA inlet width: 900mm inlet height: 300mm shaft width: 1030mm shaft diameter: 700mm blade length: 1030mm number of blades: 3 pcs Djdpfx Aozrm T Secpecn screen dimensions: 70x70mm from below, 2 toothed pulling shafts lower shaft motor: 7.5kW from above, 2 toothed pulling shafts upper shaft motor: 7.5kW belt conveyor apron feeder with chain belt 5600mm + 10600mm, 2.2kW feeder belt width: 800mm main motor: 90kW reverse gear overall machine dimensions (L/W/H): 3300x3100x1700mm shredder base dimensions: 3300x2080x1940mm feeder/apron feeder base dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm feeder belt base dimensions: 5100x1300x2520mm total weight approximately: 16000kg ADVANTAGES – German production – chain-type apron feeder, equipped with scrapers – reverse gear – DTR documentation – used shredder, very good condition Net price: 209900 PLN Net price: 48800 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: ready for operation (used), functionality: fully functional, power: 2.21 kW (3.00 HP), input voltage: 380 V, cutting width (max.): 900 mm, saw blade diameter: 300 mm, DeWalt radial arm saw for wood, light metals, and plastics, with a 300 mm saw blade, 3 HP (380 V three-phase), adjustable and tiltable. The motor-saw blade unit moves 900 mm along the upper arm, which is height-adjustable and can be swiveled to the left and right. Used, fully functional machine, including base. Dcsdpfxezl Hfus Acpen

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, Mikron UMS 900 with internal coolant system and 4th axis Considering its age, the machine is in good condition and fully functional. A special feature is the machine’s internal coolant system and full-fledged 4th axis. In addition, it has an HF spindle from Fischer with a cooling unit that can be swiveled into position. Equipment: - X-axis 900mm / Y-axis 630mm / Z-axis 500mm - Table dimensions: 1200x600mm - Internal coolant system through the spindle - Spindle speed max. 6300 rpm with SK40 - 4th axis as a rotary table, Hoffmann RWC 160 with jaw chuck - Tool changer for SK and HSK tool holders - HF spindle Fischer 42,000 rpm with HSK40 - Electric handwheel - Full protective enclosure - Complete documentation available - Control cabinet very clean Dedpjz Iz I Hsfx Acpocn - Many tool holders included The screen is not defective; the black shadows are due to the photography. Several components have already been renewed, e.g., the spindle bearings; the Y-axis has been overhauled. The absolute special feature is the internal coolant supply through the spindle! If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC drilling machine. Dsdpfxjz Evfue Acpocn

Condition: ready for operation (used), Year of construction: 2022, clamping force: 900 kN, screw diameter: 36 mm, Hydraulic injection moulding machine manufactured in 2022. This HAITIAN Mars III MA 900/280 A ECO features a clamping force of 900 kN and a maximum injection pressure of 2,340 Bar. It includes a screw diameter of 36 mm and a maximum injection volume of 121 cm³. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN Mars III MA 900/280 A ECO machine we have for sale. Contact us for further details. • Space between columns (tie-bar spacing): 360 x 360 mm Dcsdpfx Aez Dk Tqscpsn • Maximum mold height: 390 mm • Minimum mold height: 150 mm • Maximum injection volume: 121 cm3 • Maximum injection pressure: 2,340 bar • Centering ring: 125 mm • Hot runners in the machine: 6 • Core puller: 2 • Pneumatic valve: 2

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Year of manufacture: 2017 Serial number: 138337-100 Machine with Wittmann robot Dodpozvwirofx Acpjcn Clamping unit • Clamping force: 9,000 kN / 900 t • Opening force: 300 kN • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Dcedey H I Tropfx Acpon Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Model: MO Compact 900 Year of commissioning: 2025 Condition: Demo machine — under 200 production hours, virtually factory new Type: CNC plasma PIPE profiling machine (6-axis) - no beams Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a 6-axis CNC pipe cutting machine capable of processing round pipes up to 914 mm in diameter and 12,000 mm in length, with wall thicknesses ranging from 3 to 50 mm. The machine was installed in 2025 in Belgium and has logged fewer than 200 production hours — making it virtually a new machine at a pre-owned price. The 6th CNC axis maintains a constant torch-to-material distance, ensuring flawless weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head allows torch adjustment of ±60° and 380° rotation for precise contour cutting on any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor transport system on rail — Two-point fume extraction (at cutting head and through chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — E-cabinet with CNC unit, PLC, IP54 enclosure, power buffer — Industrial PC with 22" touchscreen and mobile control panel — All safety devices (CE certified per 2006/42/CE and 2004/108/CE) — Full technical documentation, operator manuals, installation drawings Key specifications: — Clamping range: 50 – 914 mm — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) — Plasma bevel range: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation footprint: 7.0 × 4.0 × 4.0 m — Machine weight: 6,000 kg Please note: COROBS machine control software licenses are not included and must be purchased separately from Voortman. Voortman can provide reinstallation, commissioning, operator training, and ongoing maintenance contracts at the buyer's facility. Why buy this machine? A new MO Compact 900 currently costs EUR 350,000+ and has a lead time of 6–12 months. This unit offers the same capability with immediate availability and significant savings. Full OEM support from Voortman is available for the buyer. Location: Belgium (available for inspection by appointment) Delivery: Ex-works. Dismantling and transport by agreement. For questions or further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Dedpfezvm E Aox Acpecn Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t