Used Versatile 900 for sale (5,886)

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Feed speed: 7 m/min Dcedpfxjxgqmxj Ad Nok Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: used, Manufacturer: Terlet Model 900 Year: 2005 Condition: Used Serial number: 411225-001-001/002 Stock number: 3422 Capacity: 2 x 750 liters Heating: thermal oil Infeed height: 1500 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 4kW each Dimensions: 1350 x 1550 x 2350 mm each Dodpfx Aozqtcdjd Njck Weight: 900 kg each Includes inspection platform Pneumatic discharge valves Mixing arm with scrapers and high-speed mixer with 2900 RPM.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 659 h, load capacity: 8,000 kg, lifting height: 4,450 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, drive type: Elektro, Electric four-wheel forklift Load center: 900 ISO class: ISO Class 4 = 5,000 - 10,000 kg Dcedpfx Adjzq Iaws Njk Mast type: Triplex Condition: As new Technical condition: New Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 96V Battery year of manufacture: 2023 3rd valve, 4th valve, rear work light, front work light, half cabin, heater, compliant with STVZO (German Road Vehicle Act), full cabin, full free lift, CE certificate.

Condition: excellent (used), CATALOG NO. 7773 TECHNICAL DATA - max. working width: 900 mm - max. working height: 160 mm - from above: - metal feed roller I unit – grooved rubber calibration roller II unit – 2x metal calibration rollers + pad - from below: Dodpfozhvcnsx Ad Nsck - conveyor belt - pneumatic oscillation of belts - electric table lift - main motor: 15kW/11kW - feed motor: 1.5kW - working pressure: 6–8 bar - extraction port diameter: 2x200 mm - dimensions (LxWxH): 1850x1950x2040 mm - weight: approx. 3000 kg ADVANTAGES - Italian production - calibration sander + pad - used sander, very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on 4.2 EUR exchange rate (Prices may vary due to significant fluctuations)

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 11,989 h, load capacity: 8,000 kg, lifting height: 3,750 mm, load center: 900 mm, fuel type: diesel, mast type: duplex, power: 87 kW (118.29 HP), total height: 3,180 mm, Equipment: air conditioning, cabin, hydraulically sliding cabin, lighting, pallet forks, sideshift, trailer coupling, Diesel forklift LINDE H80D-01/900 Year of manufacture: 2011 According to the hour meter: 11,989 hours 8 tons lifting capacity at 900mm load center 3.37 meters lifting height 3.18 meters mast height 3.37 meters overhead guard height 2.20 meters fork carriage width 2.60 meters fork length 87 kW Deutz 6-cylinder engine - FULLY EQUIPPED!! Dcodpfxozrnf Ne Ad Nek - Fork adjustment - Side shifter - Dual tires - Elevated special cabin - Cabin with hydraulic tilt - Reversing device - Rearview camera - Air conditioning - Radio - and much more... Immediately ready for use! Original paint! Selling price: 19,900,-- net Delivery also possible!

Condition: used, Year of construction: 2019, Diesinking / EDM Travel distance X: 900 mm Travel distance Y :700 mm Travel distance Z: 500 mm table size X: 1300 mm table size Y: 900 mm max. workpiece size X: 1814 mm max. workpiece size Y: 1215 mm max. workpiece size Z: 600 mm max. electrode weight: 50 kg max. workpiece weight: 3000 kg tool changer: 20 -time generator: 80 Ampere cooler Dodpfx Aszn If Ijd Njck drop tank control Charmilles

Condition: new, Bauer & Böcker LED machine light ''Nachtwächter'' L incl. power supply, dimensions 245x40mm, 9W, 900lm, unused, in sealed original packaging, 100% functional, scope of delivery as shown in the photos. Dcodpfxokk Daae Ad Nok

Condition: excellent (used), Lathe, automatic copier LOCATELLI 900 SP C - machine in stock - after the technical review - Italian production TECHNICAL PARAMETERS: - turning length max. 900 mm - turning diameter max. 200 mm - dimension of the element fed automatically max. 110 x 110 mm - main engine power 5.8 kW - pump motor power 4.21 kW - six types of rotational speed - 865/1705/1730/2975/3410/5950 - three main collecting knives - two knives with a hydraulic stroke - feed speed regulation - stroke speed adjustment of the knives - automatic and semi-automatic operating mode Dcodog Dcavspfx Ad Nok - brake Machine dimensions: - length 240 cm - width 150 cm - height 280 cm - weight ~ 1000 kg

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 - log diameter max 1300 mm TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW Dcjdpfxet Hf T Ho Ad Nok hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 880 mm, control type: manual, actuation type: electric, total height: 2,700 mm, total length: 1,800 mm, total width: 1,250 mm, overall weight: 720 kg, table height: 980 mm, Equipment: CE marking, motor brake, – Made in Italy – Year of manufacture: 2019 Dcedpfjzim Nnox Ad Nek TECHNICAL SPECIFICATIONS: – Wheel diameter: 900 mm – Max cutting height: 540 mm – Max cutting width: 880 mm – Table height from the floor: 980 mm – Table dimensions: 1170 x 800 mm – Max/min blade length: 6300 / 6100 mm – Max blade width: 50 x 0.8 mm – Motor power: 11 kW – Feed motor power: 0.37 kW – Feed with pneumatic clamping – 10 feed speed settings: 1 - 25 m/min – Roller guide for the feed – Table adjustable for angle: 0° - 20° – Outlet: 2 x Ø 120 mm – Machine dimensions (L / W / H): 1800 x 1250 x 2700 mm – Weight: ~720 kg

Condition: new, new ! twin shaft paddle mixer all stainless steel variable speed microcontroller 13,2 kW Max. loading volume: ± 500L 2 mixing directions Dcodpfx Adozly Atj Nok inspection gantry safety lid Easy clean CE-approved with vacuum pump Büsch 6,2 kW + Loader for eurobins

Condition: used, electrically heated 132 kW frying length 3.000 mm belt width 900 mm dimensions: (L x W x H): ± 5.700 x 1.700 x 2.800 mm mecanical lid oil level control oil circulation pump filter sediment removal system Dcedpfx Aozlrhuod Nok

Condition: good (used), Direct from cereal factory, Orbmix 900 twin shaft paddle mixer. Older model but has had really light use mixing cereals and granola. Dcedpfx Adezkutqo Nsk

Condition: used, functionality: limited functionality, Year of construction: 2003, operating hours: 20,268 h, lifting height: 3,750 mm, fuel type: diesel, mast type: duplex, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), Equipment: lighting, sideshift, - Engine has water in the oil; the heat exchanger is likely defective. - Mast assembly disassembled. Dedpszp N R Iefx Ad Njck - Without forks. - 2 work lights at the front. - 1 work light at the rear. - Twin tires.

Condition: used, all stainless steel Dcsdpfxjzkabmj Ad Nok with top hold down belt water circulation net belt length 8.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Original PAUL saw bushings with effective clamping lengths of 55 mm and 110 mm for the KME 2 and BM Dcodpfx Aoiimz Asd Nok Original PAUL spacer rings in various widths for S 900 re-cutting saw, outside-Ø 150 mm, bore-Ø 110 mm, with 2 keyways

Condition: used, Year of construction: 2017, load capacity: 8,000 kg, lifting height: 4,900 mm, total length: 5,250 mm, Diesel forklift Dcedpfx Adszluv Ij Njk Still RX 70-80/900 Drive Electric Year built 2017 Lifting height (mm) 4,900 Lifting weight (kg) 8,000

Condition: excellent (used), ABBA ALBAMAT 900 V5-Z1 – Fully automatic channel baler – 90 t pressing force Manufacturer: ABBA Pressentechnik Type: ALBAMAT 900 V5-Z1 The machine is in very good, fully functional condition and is available immediately. An inspection and test run can be arranged. The ABBA ALBAMAT 900 V5-Z1 is a powerful, fully automatic channel baler for high throughput and is ideally suited for compressing a wide variety of recyclable materials. Suitable for: * Cardboard * Waste paper * Corrugated cardboard * Printing waste * Plastics (PET, HDPE, etc.) * Films * Aluminum and tinplate cans * Wood shavings * Glass wool * Shrubbery cuttings Equipment * 90 t pressing force Dcodpfxozil S Us Ad Nok * 1 main press cylinder * Large feed opening * 5-point fully automatic vertical wire tying * Hydraulically automatic 3-sided channel adjustment * Hardox press bed * Hardox piston guide with wear-resistant guide strips * High-performance cooler * Control cabinet and tank heating * 10 different press programs * 5.7” touchscreen operation * Floor and piston slides to protect the tying unit Technical data * Pressing force: 90 t (900 kN) * Feed opening: 1,140 × 1,700 mm * Bale dimensions: approx. 1,080 × 1,100 × up to 1,200 mm * Bale weight paper/cardboard: approx. 500–750 kg (material dependent) * Drive power: 90 kW * Throughput cardboard (35 kg/m³): up to approx. 10 t/h * Flow rate at idle: 698 m³/h * Flow rate under operating conditions: 543 m³/h * Cycle time: 16 seconds * Specific pressing force: 76 N/cm² * Machine weight: approx. 24,000 kg Available for immediate delivery. Transport and loading can also be arranged upon request.

Condition: good (used), - 1pc. Jaw crusher Metso / Lokomo MK 120 . 1.200 x 900mm. Dcjdpfx Adslf Iqcj Nok With feed hopper . With motor . With spare parts : swing arm, flywheels, jaws, side wedges, bearings, springs etc. See PDF-file below for more detailed information.

Condition: excellent (used), functionality: not functional, overall weight: 180 kg, Original deep-dig bucket, 900 mm, for JCB 3/4 CX. Delivery on a Euro pallet within Europe is possible – shipping costs available upon request. Djdpfszrih Esx Ad Nsck

Condition: ready for operation (used), Year of construction: 1969, x-travel 700 / 710 mm y-travel 275 mm z-travel 350 mm taper in main spindle ISA 40 table surface area 900 x 250 mm Dodpfx Adezkbnzo Nsck T-slots 3 x 18 x 60 Stk. turning speeds 32.0 - 2000 U/min feed stepless 15 - 750 mm/min voltage 400 V total power requirement 4.0 kW weight of the machine ca. 1400 kg range L-W-H 1000 x 1400 x 1800 mm from a training workshop (vocational school) Features: - Robust, electric-motor-driven universal milling machine - With horizontal and vertical main spindles * Vertical main spindle can be swiveled 360° in two planes - Sturdy T-slot clamping table with 18 mm T-slots - Electric feed control - Stepless speed adjustment - Swiveling machine light - Control cabinet, installed on the right - Original operating instructions Machine data sheet

Condition: ready for operation (used), Year of construction: 2016, A Burkhardt + Weber heavy-duty CNC large-format machining center is available. Axis travel X/Y/Z: 1600mm/1250mm/1250mm, tool interface: SK50, pallet dimensions X/Y: 800mm/1000mm, 125mm tool pockets: 95, 225mm tool pockets: 7, 350mm tool pockets: 5, 420mm beam tool pockets: 5, coolant system capacity: 1900l, control: Siemens 840D with ShopMill, operating hours: approx. 20000h. Including coolant system with paper band filter, machine enclosure, through-spindle coolant, external coolant nozzles, chip conveyor, dual-gripper tool changer and HV-NC swivel head. Documentation available. An on-site inspection is possible. Dodpfx Ajzp Rgqsd Njck

Condition: used, machine/vehicle number: 15177, Year of construction: 2018, operating hours: 11,573 h, load capacity: 8,000 kg, lifting height: 3,050 mm, load center: 900 mm, fuel type: diesel, mast type: simplex, construction height: 2,860 mm, fork length: 2,400 mm, Equipment: cabin, 4949984 Serial Number: 517344J00032 Dodpfx Adew U Hlhe Njck

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 18,822 h, load capacity: 8,000 kg, lifting height: 4,850 mm, fuel type: gas, mast type: simplex, construction height: 3,780 mm, drive type: Treibgas, Internal combustion forklift Dcedpfx Aeudf Taod Nsk ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Description: Linde Safety Pilot Camera 3rd valve, 4th valve, heater, full cabin, air conditioning

Condition: excellent (used), Year of construction: 1996, Description follows Dodpfsxzk Ncsx Ad Njck