Used Torna 765 for sale (509)

Condition: excellent (used), Type: VCS 7034-5 Climate Test Chamber Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temperature deviation over time: ±0.1 to ±0.5 K Temperature deviation spatially: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3,000 W / at -20°C: 3,000 W Temperature calibration points: +23°C and +80°C Fedpfx Aexufypoh Uopp Performance for climate tests: Temperature range: +10 to +95°C Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Humidity deviation over time: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climatic calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width: 580 mm, Depth: 765 mm, Height: 750 mm External dimensions: Width: 870 mm, Depth: 1595 mm, Height: 1775 mm Feedthroughs: 1 x approx. 50 mm Ø, left side 2 x approx. 125 mm Ø, left side 1 x approx. 125 mm Ø, right side Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your security as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface Fodpfx Ajn N Ekcsh Uopp - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Year of construction: 2018, condition: ready for operation (used), This 4-axis BIESSE Rover S FT 1536 was manufactured in 2018. It features a robust gantry design, a working area of 3765 × 1560 mm, and a main spindle power of 13.2 kW. Equipped with a HSK-F63 tool holder system, 12-position disc-type tool changer, and a BIESSE BH 10 drilling unit with comprehensive vertical and horizontal drilling capabilities. It also includes a grid vacuum table, dual 500 m³/h vacuum pumps, and is DXF file compatible. Contact us for more information about this machine. Fpedpfxoxtq Ucs Ah Uop Application Types CNC Wood Machining

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides Fjdpfx Aod Hkqhoh Ujpp - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: used, Year of construction: 2011, CNC Machining Center Biesse skill 15 36 G FT Year of construction 2011 Machine no. 52549 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 3765 mm Y axis 1560 mm Z axis 324 mm Inclusive - 2x vacuum pump, Busch Mink MM1322 AV; 360m³/h - Safety mats Spindle bearings need to be replaced, sounds bad. Disassembled for transport on normal trailer; 6000x2400x2400mm; Own weight 2500kg - Year: 2011 - Documentation available: No - Tool clamping system: HSK-F63 - Drilling unit present: No - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Safety feature: Safety light curtain, Door interlock switches, Enclosed fence, Bumper guard, Safety mat - Vacuum pump present: Yes - └ Brand: Busch Mink - └ Type: MM1322AV - └ Capacity [m³/h]: 360 - Working range X [mm]: 3765 - Working range Y [mm]: 1560 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fpedpownh Ifefx Ah Uop Glenn Smeets

Condition: good (used), Year of construction: 2019, load capacity: 1,600 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, gearing type: automatic, total height: 2,150 mm, Equipment: CE marking, lighting, sideshift, trailer coupling, Vehicle Description E-Forklift TOYOTA 8FBMK16T Year: 2019 According to the hour meter: 19,765 operating hours Fodpfx Aoxfubksh Uepp Lifting capacity: 1.6 tons Overall height: 2.15 meters Lift height: 4.70 meters Maintenance-free LITHIUM ION battery! - Triplex full free lift mast - Sideshift - Load guard - Lighting system - Incl. 48V charger - Original paintwork - Immediately ready for use - White, non-marking special tires Sales Price: 8,250,-- net Affordable delivery available!

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Fjdpfxjxt Hn Se Ah Uepp Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: used, Year of construction: 2025, operating hours: 21 h, Powerful low-lift pallet truck in top condition for sale! The truck is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 SCHORR Electric Platform Low-Lift Pallet Truck 2000KG / 2400MM / 24V 205Ah Powerful electric low-lift pallet truck with a 2000kg load capacity and 2400mm forks. Designed for the simultaneous transport of two Euro pallets. ✓ 2000kg load capacity ✓ 24V 205Ah Li-Ion battery Fpodpfxowh Nzgo Ah Uep ✓ Includes quick charger ✓ Fully electric & self-propelled ✓ Ideal for large warehouses ✓ Extremely robust and reliable Pallet truck with steel frame for maximum comfort and driver protection Good maneuverability thanks to power steering and compact chassis Excellent working ergonomics – height-adjustable tiller, suspended driver's platform, and padded backrest High travel speed and gradeability Powerful vertical AC drive motor Automatic speed reduction when turning Reliable drive system The electric SCHORR pallet truck features a reliable drive system with a travel speed of 10 km/h and precise steering. It impresses with powerful performance and optimal stability during operation. Long service life The vertical transmission of the pallet truck is particularly robust and ensures a long service life. Easy to use The easy-to-operate pedal ensures a high level of driving comfort. The driver has good visibility and can lean against the protected steel structure. Ensuring operational safety The pallet truck's steel protective bars ensure safe operation even at higher speeds. The electric low-lift pallet truck also features an automatic speed control function when steering. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR20SLE (lithium battery) Load capacity: 2.0 t Model: 240E Weight including batteries: 765 kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 2381 mm Overall width: 734 mm Fork length: 2400 mm Length including fork face: 1234 mm Stroke: 125 mm Fork dimensions DIN ISO 2331: 55 mm x 170 mm x 1150 mm Fork spacing: 685 mm Working aisle width for pallets: 1000 x 1200 crosswise 3017 mm Working aisle width for pallets: 800 x 1200 crosswise 2874 mm Turning radius: 2217mm Speed Travel speed with/without load: 8.5 km/h / 10.0 km/h Max. gradeability with/without load: 6% / 16% *Further technical data is available upon request. Would you prefer to finance or lease the machine? No problem! We also offer attractive options for this. Simply contact us, and we will advise you on the various options. We look forward to hearing from you! We at SCHORR are happy to answer any questions you may have about our high-speed machines. You can reach us by phone or email. We look forward to hearing from you and assisting you with your consultation.

Condition: good (used), Year of construction: 2020, operating hours: 5,765 h, load capacity: 3,000 kg, lifting height: 5,540 mm, fuel type: electric, mast type: triplex, construction height: 2,525 mm, empty load weight: 5,500 kg, mileage: 5,765 km, This STILL TRIPLEX forklift is from 2020 and in good condition. The forklift has a lifting capacity of 3,000 kg and can lift up to a height of 5,540 mm. It is equipped with FREELIFT, a SIDESHIFT, and a FORK SPREADER. The overall clearance height is 2,525 mm. Only 5,765 hours on the clock. The 2020 battery comes with an external charger. Schedule a test drive. Watch the video on YouTube. Fpedpew Ddvksfx Ah Uep

Condition: good (used), Pillar jib crane, indoor crane, workstation crane -Load capacity: 300 kg -with chain hoist: steel type -Projection: 3020 mm -Total height: 3860 mm -Hook height: 2765 mm -Transport dimensions: 800/3860/H520 mm -Own weight: 332 kg Fjdpfxsxrgbcj Ah Uopp

Condition: used, Year of construction: 2013, operating hours: 8,765 h, Type of fuel: LPG Empty weight: 4.040 kg Dimensions (LxBxH): 240 x 115 x 298 cm Lifting capacity: 2.500 kg Lift height: 477 cm Fork dimensions: 1.200 x 900 mm - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: B875B24652L - Operating hours: 8765 - Lifting capacity: 2500kg - Lifting height: 4770mm - Overhead clearance: 2980mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 900mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights - Mast: Duplex - Drive: LPG - Transport dimensions: 2400mm x 1150mm x 2980mm (l x w x h) - Transport weight [kg]: 4040kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fpedpfxoxrdg Ns Ah Uop Tess van den Boom

Condition: ready for operation (used), Year of construction: 2004, Vehicle description Fpsdpsrn Nkzefx Ah Uep Vehicle descriptionDiesel all-wheel scissor lift JLG 260 MRT Year 2004 acc. counter 2.260 hours 17.5 KW Kubota engine 3,765 KG dead weight 9.92 meters working height - All-wheel drive - Extendable platform - 570 KG net load - ready for immediate use - Test book and inspection on request before delivery NEW! Sales price: 8.950,-- net Cheap delivery also possible!

Condition: new, Year of construction: 2025, machine/vehicle number: 13655/25, fuel type: gasoline, motor manufacturer: GX 390, General information Field of application: Construction Weights Empty weight: 125 kg Functional Generator capacity: 8,7 kVA CE mark: yes Other information Fuel consumption: 2.7 Liter/Hour at 75% Load Generator: Linz E2W220DC Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery Water tank volume: 45 l Transport dimensions (LxWxH): 0,79x0,58x0,765 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Fodpfxsxbwwgj Ah Uopp Various options available Large stock.

Condition: new, Year of construction: 2024, SCHORR electric platform pallet truck 2000KG / 2400MM / 24V 205Ah Powerful electric pallet truck with 2000kg load capacity and 2400mm forks. Designed for simultaneous transportation of 2 Euro pallets. ✓ 2000kg load capacity ✓ 24V 205Ah Li-Ion battery ✓ Quick charger included ✓ Fully electric & self-propelled ✓ Ideal for large warehouses ✓ Extremely robust and reliable Low lift pallet truck with steel frame for maximum comfort & driver protection Good maneuverability thanks to power steering and compact chassis Excellent working ergonomics - height-adjustable tiller, spring-mounted driver's platform and padded backrest High travel speed and climbing ability Powerful vertical AC drive motor Automatic speed reduction when turning Reliable drive system The electric SCHORR low lift pallet truck has a reliable drive system with a travel speed of 10 km/h and precise control. It impresses with its powerful performance and optimum stability during operation. Long service life The vertical gearbox of the low lift pallet truck is particularly robust and guarantees a long service life. Easy handling The easy-to-operate pedal ensures a high level of driving comfort. The driver has a good view and can lean against the protected steel construction. Guaranteed operational safety Fodpfxsuuhvte Ah Ujpp The steel safety bars on the pallet truck ensure safe working even at high speeds. The electric pallet truck also has an automatic speed regulation function when steering. Technical data Manufacturer (abbreviation): SCHORR Manufacturer's code: RR20SLE ( Lithium battery) Load capacity: 2.0t Model: 240E Tare weight incl. batteries: 765kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 2381mm Overall width: 734mm Fork length: 2400mm Length including fork crown: 1234mm Stroke: 125mm Fork dimensions DIN ISO 2331: 55mm x 170mm x 1150mm Fork outer distance: 685mm Aisle width with pallet: 1000x1200 transverse 3017mm Aisle width with pallet: 800x1200 transverse 2874mm Turning radius: 2217mm Speed Travel speed with/without load: 8.5km/h / 10.0km/h Max. Climbing ability with/without load: 6% / 16% *Further technical data available on request. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any further questions you may have about our high-speed products. You can reach us by phone or email. We look forward to hearing from you and assisting you with advice.

Condition: good (used), Year of construction: 2008, Table size, pallet size: 500 x 500 mm Pallet quantity: 2 Maximum workpiece size: 730 x 500 mm Maximum table load: 500 kg Travel paths: X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm C-axis: 360° (turntable) A-axis: +30°/-120° (swivel table) Speed range: 12 000 rpm Tool holder: SK 40 Tool positions: 80 Internal tool cooling: 20 bar Main drive power: 26 KW Fpsdpfx Ajr Drcmoh Usp Machine weight: 17 000 kg Space requirement (LxWxH): 5 500 x 4 000 x 3 400 mm Control system: Mazatrol Matrix Accessories: Chip conveyor, complete documentation for the machine.

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Serial No: 3669 ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Fpedpfxjw Rn Eue Ah Uop Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Serial No: 8293 ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Serial No: KM 765 ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: used, Year of construction: 2015, operating hours: 1,748 h, 2015 | Nissan Cabstar 35.12 Multitel MT 162 EX (16m) | Used Truck-Mounted Boom Lift | 1748 hours | 13870 kms 📍Location: Germany, Idstein 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Fpsdpexrurvofx Ah Ujp 💰 Buy Now for EUR 32900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 53 inspection points 50 approved ✅ 0 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Overall good condition however the telescopic boom could not be tested due to the sensor issue. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39765 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 664,000 km, power: 368 kW (500.34 HP), first registration: 01/2020, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, compressor, parking heater, Manufacturer Scania Model R500 6x2 NGS CR20H 25 m3 Silo Euro 6 Year 2020 Condition Very good Serial Number YS2R6X20005576590 Fjdpfx Ahswk Tnis Ujpp Ref. nr. 877854 Reg. date: 21-01-2020 Last seen: 25-02-2025 Hk: 500 Km: 664000 Gearbox: Opticruise GRS905R Eurotype: 6 Diesel tank: 1 Tank liter: 500 Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: CR20H Navigation: ? Coffee machine: ? Leather seats: ? Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Retarder: ? Tire Size: 385/65 - 315/80 - 385/65 Cover% left 80 - 80 - 80% Front suspension: Air Suspension rear: Air Wheelbase: 4150mm. Toolbox: ? Hydraulic system: ? Total weight: 26000 kg. Net weight: 11433 kg. Load capacity 14567 kg. Manufacturer: HMK Bilcon Tank capacity: 25800 l. Separation room: 4 Compressor: ?

Condition: good (used), mileage: 97,053 km, power: 89 kW (121.01 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,500 mm, first registration: 05/2019, CO₂ emissions: 174 g/km, emission class: euro6, color: brown, driver cabin: day cab, suspension: parabolic leaf (spring), tire size: 215/60R17C, number of seats: 2, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, fog lights, navigation system, power assisted steering, soot filter, traction control, = Additional Options and Equipment = - Alarm system - Electric windows - High beam - Low noise level - Air horn - Parabolic suspension - Particulate filter - Radio/CD player - Radio/cassette player - Reversing camera - Side door - Stability control - Body-colored bumpers - Pre-heating automatic system - Xenon lighting = Remarks = OPEL Vivaro-B CDTI | 97,053 km | 2019 | Tires 90% | Navigation | Air conditioning | Reversing camera | Manual | Euro 6 | NL-Van Chassis number: W0VF7G609JV620765 EXPORT: Road transport services: NL transit plates with insurance for 14 days + €150 Sea freight services: Transport to the port (Antwerp/Rotterdam/Amsterdam) + €300 Transport to the port of Zeebrugge + €400 Fpedpfsw S Hr Aox Ah Uop More about Geerts Trucks & Trailers: YouTube channel: Geerts Trucks & Trailers Instagram: Geerts Trucks & Trailers Facebook: Geerts Trucks & Trailers Tiktok: Geerts Trucks & Trailers LinkedIn: Geerts Trucks & Trailers Like and subscribe to our NEWEST listing = Further Information = General Information Number of doors: 5 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 1,598 cc Transmission Transmission: 6-speed manual Axle Configuration Tire size: 215/60R17C Axle brand: DUNLOP Brakes: disc brakes Suspension: parabolic suspension Front axle: Max. axle load: 1,585 kg; steering; Tire tread left: 90%; Tire tread right: 90% Rear axle: Max. axle load: 1,650 kg; Tire tread left: 80%; Tire tread right: 80% Dimensions Dimensions (L x W x H): 540 x 195 x 195 cm Weights Unladen weight: 1,795 kg Payload: 1,205 kg Gross vehicle weight: 3,000 kg Fuel Consumption Average fuel consumption: 6 l/100km Urban fuel consumption: 8 l/100km Extra-urban fuel consumption: 6.7 l/100km Condition Technical condition: good Visual condition: good Further Information For more information, please contact Olivier Geerts or Edwin Geerts.

Condition: used, Vötsch Model: VCS 7034-5 Climatic Test Chamber, Water-Cooled Test chamber volume: 335 liters Specifications for temperature testing: Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 K Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Specifications for climate testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Fodpfexqzbbsx Ah Uepp Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as a buyer, please take note of the following information! The following procedures are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and error) If you have further questions, we would be happy to answer them by phone.

Condition: used, mileage: 232,627 km, power: 380 kW (516.66 HP), first registration: 10/2018, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 13,970 kg, empty load weight: 12,030 kg, next inspection (TÜV): 09/2026, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 2,550 mm, total width: 3,700 mm, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, company-owned, 2x comfort seats, seat heating, electric mirrors, heated mirrors, electric window (left and right), air conditioning, sun visor, radio CD, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, high beam headlights, work lights, rotating beacon, storage box, leaf/air suspension, last axle liftable and steerable, trailer coupling with air and electrical connections, aluminum tank, underrun protection, hydraulic transverse locking, roof hatch, green environmental badge. Wheelbase: 4,500 mm. Body: 20t Marrel AL20S56 hooklift system for containers up to 6.8m. Front axle: 8.0 t, rear axle: bevel gear 485, hypoid, 13.0 t, trailing axle: 9 t, steered, unloadable, liftable. Disc brakes on front and rear axles. Driver and passenger air-sprung comfort seats, leather, high storage on engine tunnel. Cable remote control for air suspension. Illuminated Mercedes star. ClassicSpace S-cab, 2.30 m wide, tunnel 170 mm. Central locking with 2 keys. Mercedes PowerShift 3, transmission G 281-12/14.93-1.0. 12.7 cm combined instrument cluster with additional displays. Radio/navigation system Bluetooth®, comfort, 2-way speaker system. Tank: 510 l, left, 650 x 700 x 1300 mm, aluminum. Bi-xenon headlights, headlamp cleaning system, fog lamps, LED daytime running lights, LED rear lights. Engine: OM473, inline-6, 15.6 l, 380 kW (517 hp), 2,600 Nm, Euro VI, version 2. Engine brake, standard system, NA MB 131-2c, pump, rear engine PTO, hydraulic pump ISO 7653D. Standard trailer coupling D40, Ringfeder. Stability Control (ESP), Lane Keeping Assist, Attention Assist, Active Brake Assist, cruise control. Total length: 8,550 mm - 9,450 mm Width: 2,550 mm Height: 3,700 mm Accessories listed without guarantee. Changes, prior sale, and errors excepted! Fpjdpfxoxbfx Se Ah Ujp

Condition: good (used), Year of construction: 1986, functionality: fully functional, total height: 1,800 mm, total length: 2,500 mm, total width: 1,000 mm, overall weight: 1,000 kg, spindle speed (min.): 1,400 rpm, spindle speed (max.): 7,000 rpm, number of spindles: 1, type of input current: three-phase, TECHNICAL DATA & EQUIPMENT: Serial Number: 765 Operating Voltage: 380 V Frequency: 50 Hz Rated Current: 14 A Fedpsw Nn Akofx Ah Ujpp Voltage Range: Geb Azzknsw D T T Sodoka (context unclear; possibly placeholder or specific manufacturer code) Centre Height Universal Dividing Head: 170 mm Centre Height Tailstock: 120 mm Centre Height Tailstock with Intermediate Bearing: 170 mm Max. Workpiece Diameter Between Centers: 338 mm Max. Workpiece Diameter in Cantilever Mounting: 600 mm Max. Distance Between Centers: 950 mm Internal Taper Dividing Head Spindle: Morse Taper 4 (MT 4) T-slot Size Machine Base: 12 mm T-slot Size Other Parts: 8 mm Movement Range: Grinding Stroke Travel: 190 mm Cross Movement Tool Holder: 100 mm Height Adjustment Grinding Head: 325 mm Grinding Spindle Infeed: 5 mm Coarse Adjustment Travel Tool Holder: 230 mm Grinding Head Slide: 800 mm Universal Dividing Head on Tool Slide: 330 mm Swivel Range Grinding Head Slide: 360° Grinding Head: 360°, Tool Holder: 360° Universal Dividing Head Horizontal and Vertical: 360° Maximum Grinding Length for Helical Grinding: 190 mm Max. Rotation of Dividing Head Spindle for Helical Grinding: 1.5 revolutions Max. Grinding Wheel Diameter: 125 mm Max. Cut-Off Wheel Diameter: 200 mm Spindle Speed: 1,400 – 7,000 rpm The machine is equipped with a two-axis optical measuring system, dressing device, table extension with tailstock, and matching accessories. Contents include tool holders, clamping equipment, a helical grinding device, radius grinding device, a tool post, and various accessories. NOTES ON COLLECTION: Loaded onto truck, forklift available. Available immediately.

Condition: used, mileage: 209,324 km, Year of construction: 2021, Field of application: Freight transport Serial number: W1V9076571P35xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21456 Fedpfxsxpdg Ro Ah Ujpp Specifications: 2021 model 209,324 km (I'm going to give you a little bit) 190 hp Automatic transmission Euro 6 engine 16 1 seats Approved for 3 wheelchair users 2 air conditioners 2 Webasto Cow catcher with extra light Air conditioning/ac Rear view camera Seat heating Heated mirrors Bluetooth Light Radio Ready for delivery Description: We have a 2021 Mercedes Sprinter 519 Bus-prestige mb 4x2 sprinter w/ 16 1 seats and 3 wheelchair users for sale. The bus has a new drive axle, brakes and handbrake.  Everything works as it should and services have been carried out at an approved workshop. Ready for delivery Km: 209324 HK: 190 Technical approved: Yes EU-approved until: 04.10.2026 Own weight: 3585 Euro: 6 Model: Sprinter 519 m/ 16+1 seteplasser og 3 rullestolbrukere Gearbox: Automatic Number of seats: 17

Condition: excellent (used), CATALOG NUMBER 7650 Technical Data: - Max working length: 1500mm - Max working diameter: 250mm - Milling (disc milling cutter): 7.5kW - Spindle – 2800rpm 3kW - Spindle speed: 700/1200/1500/2000rpm - Grinding unit: 0.75kW - Hydraulic motor: 3kW Fodowk Hbpepfx Ah Ujpp - Total power: 17.75kW - Air requirement: 6-8bar - Feeder for blanks up to 150x150mm - Extraction port diameter: 100mm, 160mm - Transport dimensions (L/W/H): 4350x2300x1980mm - Weight: approx. 3000kg ADVANTAGES – German-made – Automatic hydraulic copy system – Original DTR documentation – Unpainted – Used lathe, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on an exchange rate of 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: used, mileage: 177,320 km, power: 390 kW (530.25 HP), first registration: 04/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2026, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, DAF XG 530 FT SSC 4x2 Tractor Unit VIN: G449018 Chassis / Attachments: * Wheelbase: 4,000 mm * Full air suspension * Tyres: 315/70 R 22.5 * Condition: front approx. 50/60%, rear approx. 60% * 2 x ALU diesel tanks: 765 L + 430 L * 1 x AdBlue tank Engine / Transmission: * 390 kW // 530 HP // 12,902 cm³ // Euro 6e * ZF intarder * ZF TraXon // automatic * Differential lock Cabin Equipment: * XG driver’s cab * 2 bunks * Auxiliary heater * Automatic climate control * Stationary air conditioning * LED / skylights * Refrigerator * Radio / CB radio * USB, AUX, BT * ACC = Adaptive Cruise Control * AEBS = Advanced Emergency Braking System * FCW = Forward Collision Warning * LDWS = Lane Departure Warning System * Lanne Side Guard = Turn Assist / Blind Spot Assist Weights: * Gross vehicle weight: 18,000 kg * Payload: 9,642 kg * Curb weight: 8,358 kg Other: * 1 previous owner * German registration * Safety inspection (HU/SP) valid until 11/2025 New general inspections, safety checks, or load adjustments (reduction/increase of weight rating) are available upon request. We are happy to assist in obtaining export/temporary number plates, and we can also arrange delivery of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! ----No liability for printing or typographical errors. Specifications subject to change, prior sale and errors excepted! Your RL-Leible Team! ----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With our many years of experience in the reconditioning and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of both new and used commercial vehicles. On an area of 11,000 sqm, we offer a wide range of vehicles. Our company philosophy is characterized by fairness and integrity. Customer satisfaction is extremely important to us, which is why we provide an excellent all-round service package and assign a competent contact person to guide you throughout the buying or selling process. See for yourself! Our services for you: Vehicle loading We are pleased to help you load your purchased vehicles. Organization of special transports We are happy to assist you in organizing special transports. Temporary/export number plates We assist in obtaining export or short-term number plates. Customs clearance Fodpfexvv Dhsx Ah Ujpp We are glad to help you with customs formalities.