Used Tornos Deco 13 for sale (124)

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 12,000 rpm, bar diameter (max.): 13 mm, number of axes: 6, This 6-axis TORNOS Deco 13 b was manufactured in 2004. It features a maximum bar diameter of 13 mm and a spindle speed range of 100 – 12,000 rpm. The machine includes a linear tool system with 6 tool positions and full machining capabilities for turning, drilling, tapping, and threading. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 13 b Swiss Type Lathe we have for sale. Contact us for further details. • Capacity: • Max bar diameter: 13 mm • Axes: • Number of axes: 6 (X1, Y1, Z1, X2, Y2, Z2) • Main spindle (S1): • Max bar capacity: 16 mm • Recommended min bar diameter: 3 mm • Max workpiece length: 160 mm • Collet type: Schaublin F20 • Subspindle (S2): • Max part diameter: 16 mm • Max part length (counter-operation): 160 mm • Spindle speed: 100–12,000 rpm • Clamping force: 730 daN • Axes travels: • X1: 35 mm, Y1: 158 mm, Z1: 187 mm • X2: 118 mm, Y2: 160 mm, Z2: 174 mm • Feed rates: • Max axis speed: 20 m/min • Guide bushing: • Max bar passage: 16 mm • Tooling system: • Linear tool system (front + rear) • Number of tool positions: 6 (3 axial + 3 transversal) • Tool spacing: 38 mm • Max rotating tools: up to 3 • Driven tools (S3): • Max speed: 8,000 rpm • Power: up to 1.1 kW • Drilling capacity: up to 8–10 mm • Tapping capacity: M6–M8 • Counter operations: Isdpfx Abjywlhbogoia • 3 working positions • Full machining capability (turning, drilling, tapping, threading) • Cooling system: • Oil capacity: 200 L • Chip tank: approx. 100 L Additional equipment • Bar feeder (integrated): • Max bar length: 3.3 / 3.85 / 4.2 m • Min bar length: 1.2 m • Bar diameter range: 3–16 mm • Parts unloader • Oil bath system • RS232 interface • Work area lighting Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 180 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] SECONDARY OPERATION - Number of positions : 6 Iiedpfx Absuhayiegea POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of working hours : 53892 [h] EQUIPMENT - CNC : FANUC PNC DECO - Rotating tool motor on : S2,S5 - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 160 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] Isdsuhaz Tspfx Abgoia COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1100 X 7270 [mm] - Machine height : 1950 [mm] - Machine weight : 3000 [kg] MACHINE HOURS - Number of hours under power : 22834 [h] EQUIPMENT - CNC : Fanuc PNS DECO - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : ROBOBAR SSF

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 180 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 0.1 [°] - Number of guide bush holders : 2 GUIDE BUSH HOLDER 1 - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] SECONDARY OPERATION - Number of positions : 6 POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of working hours : 30161 [h] EQUIPMENT - CNC : FANUC PNC DECO - Rotating tool motor on : S2, S3, S5 - Rotating guide bush Iiodpouhaypefx Abgsa - Parts catcher - Ejection of workpiece - Coolant tank

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Iiodpfx Ajw T Tcwsbgoa Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 184 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 Iodpfxsuhhp Sj Abgeia - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kVA] MACHINE HOURS - Number of working hours : 54.035 [h] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5,S6 - Rotating guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : IEMCA GENIUS 118 / 32LL - Cooling unit : MARKSA CSW 200 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 3

Condition: used, Swiss-type cnc lathe TORNOS DECO 13A Isdpfx Aouhhp Esbgoia

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Max. machining length : 184 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 10.000 [rpm] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 5 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] END ATTACHMENT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8.000 [rpm] SECONDARY OPERATION - Number of positions : 6 - Number of motorized positions : 3 - Live tools speed : 8.000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kVA] Iisdpfx Ajuha D Ujbgoa MACHINE HOURS - Number of working hours : 42762 [h] EQUIPMENT - CNC : Fanuc PNC DECO - Rotating tool motor on : S2, S3, S5,S6 - Rotating guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : Iemca Genius 118 / 32 LL - Cooling unit

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2560460122, Tornos Swiss GT13/6 - Sliding Headstock Automatic Lathe CNC Control: FANUC 31i-B, 6 axes, 13 mm capacity Basic Machine Equipment: - 6 linear axes - Independent main and counter spindle - Synchronously rotating guide bush - Adaptation for operation without guide bush - C axis for main and counter spindle - Adjustable pneumatic ejector incl. counter spindle coolant flushing - 3-color signal lamp (yellow, red, green) - Centralized lubrication - Electrical interface for Tornos bar feeder - Oil mist extraction interface - Interface for fire protection system - Interface for customer M-function (6 inputs and 6 outputs) - Compliance with CE and EMC standards Main Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076) - Max. bar diameter without preparation: 10 mm - Max. bar diameter with preparation: 13 mm - C1 axis function Guide Bush: - Max. speed: 15,000 rpm - Max. diameter of synchronously rotating guide bush: 13 mm (with integrated motor), guide bush type: B (853) - Max. workpiece length in one clamping: 180 mm - Adaptation kit for operation without guide bush (max. travel: 30 mm) Tool System for Main Operations: - Tool holder for 5 turning tools 12x12 mm on the front of the carrier - Tool holder for 4 turning tools 12x12 mm on the rear of the carrier - S11 tool drive (10,000 rpm) for rotating tools mounted on the front of the carrier X1/Y1 - 1 drive module for cross machining with 3 spindles for ESX 16 collets (2 x 10,000 rpm and 1 x 6,250 rpm) - S21 tool drive (6,000 rpm) for up to 2 driven units mounted on the rear of the carrier X1/Y1 (driven units not included) - Tool carrier with 4 bores Ø 22 mm for stationary finishing tools Counter Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076), max. Ø capacity: 13 mm - C4 axis function Tool System for Secondary Operations: - Base carrier for 8 back-working tools; on the 4 upper positions, rotating and/or stationary tools can be mounted (rotating tools not included) - 4 lower positions with 4 fixed holders for ESX 16 collets - 2 stationary holders with Ø 22 mm bores (for upper positions) Isdeyzigcepfx Abgoia - S51 tool drive (6,000 rpm) for driving back-working tools (max. 4 rotating tools) ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing options to suit your requirements. Whether down payment, installment plan, or individual financing solutions – together we will find the right option for you. Upon request, we will also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and punctual process so you do not have to worry about a thing.

Condition: excellent (used), As-new tool holders for DECO 20 - DECO 26 3 pieces - TORNOS fixed tool holders for X1Y1; X2Y2; X4Y4 ----- - Turning tool holder for 16x16 mm tools: - Price per holder: €180.00 each fits DECO2000 ø20 & 25mm, DECO 20 and DECO 26 3 with front plate 1 without front plate ----- Shipping within Germany €12.00 Shipping within EU €25.00 Additionally, we have 6 spindle reduction sleeves: were used in DECO 26mm inside-ø 8.0mm; ø 12.0mm; ø 21.0mm; 3x ø 26mm outside-ø 30mm, thread M32x1.5, approx. 360mm length flange-ø outside 45mm x 9mm, 4x M4 threaded holes Iijdpfsy Apn Ajx Abgsa 2x 8 mm keyway Special price for all 6 reductions including shipping: €380.00 We are happy to send photos upon request; for this, we require your email address.

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 Isdey Aprnspfx Abgjia - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 x 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Ejection of workpiece - Coolant tank - Bar loader : LNS TRYTON

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 Iijdpfx Abjy Aprhjgja - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 x 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Ejection of workpiece - Coolant tank - Bar loader : LNS TRYTON

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 Iedjy Aprbepfx Abgoia - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 x 1010 [mm] - Machine height : 2000 [mm] - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Ejection of workpiece - Coolant tank - Bar loader : LNS TRYTON

Year of construction: 2003, condition: ready for operation (used), Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement. Iisdpfxsyypmys Abgoa

Condition: ready for operation (used), Year of construction: 2006, bar diameter (max.): 10 mm, controller manufacturer: FANUC, controller model: 16i-TB, number of axes: 9, Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details. Isdoytcaljpfx Abgoia • Overhauled in 2016: • Checked machine, ball screws (replaced if necessary), guides, guide bushing, main and counter spindles • Complete cleaning • Maintenance carried out in accordance with Block 3 • Replacement of all drive belts • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/features: • Moving headstock • Directed spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross slide with 4 tool holders • Sensor for tool breakage detection Additional equipment • Automatic and integrated bar loader (oil bath) TORNOS-BECHLER Type SSF-210, equipped with Robobar SSF 3 m loading magazine • Max. bar length: 3.2 m • Bar capacity: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without clamp) • “HYBRIDE 10+5” drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum • Integrated 25 L hydraulic unit with filter • Front/rear support foot, center height 1100 mm • Electrical control box (diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Color: Anthracite RAL 7016 / Gray RAL 7035 Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2000, bar diameter (max.): 7 mm, number of axes: 9, Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details. • Movable headstock • Directional spindle stop S1 • Cross slide with 4 tool holders T11–T24 with vertical and horizontal movement • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Motorization S2 • Integrated 25-liter hydraulic unit with filter • Electrical control box • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Additional equipment • Loading magazine with drum (bar feeder) • “HYBRIDE 10+5” drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation up to 8 mm) • 3 pre-settable turning tool holders Ijdpfx Abeyr Nflogjia • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Front/rear support foot, center height 1100 mm Technical Specification Counter Spindle No

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. 2 similar machines available! Additional information Iiodpjx D Dliefx Abgja • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Sensor for tool breakage detection • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock • Directed spindle stopOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. 2017 overhauled and two further similar machines available (both overhauled 2018)Overhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock Iijdpfx Ajx D D Ikebgea • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Equipment to be equipped with Robobar SSF 3 m loading magazine Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2003, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, directional spindle stop, and multiple cross-slides with tool holders for versatile machining. Equipped with a counter-spindle and programming software in five languages, it's ideal for complex turning tasks. Includes interfaces for bar feeders and tool breakage detection. Reach out for more information about this machine. Additional information • TB-DBCO Version 6 programming software: Single-user product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language • Movable headstock: S1/Z1 axis, n = 16000 rpm, F13 collet chuck Iijdpfjx D Dm Hjx Abgoa • Spindle stop: Directional spindle stop S1 (programming increment 0.1 degrees) • Cross-slides: • 1 cross-slide with 4 tool holders (X1 and Y1 axes) • 1 cross-slide with 3 tool holders (Z3 and X3 axes) • 1 cross-slide with horizontal and vertical movement (Z4 and X4 axes) • Pneumatic cylinders: 3 independent for quick positioning • Counter-spindle: Independent (S4), n = 12000 rpm, F13 collet chuck • Cross Slide Support Options: • Pre-adjustable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation direction: right • S2 motorization (electric/mechanical) for driven units on the X2-Y2 linear tool carrier • Driven end drilling/milling unit: Max. speed 12000 rpm • Cross drilling/milling/tapping attachment for BSX 12 collet chuck • Sensor: Tool breakage detection with TYPE MIDI-DETECTOR, oscillating probe type MINI-DETECTOR, electrical interface, pneumatic control equipment • Interface: Adapting an LNS bar feeder • Spinde Speed: n = 16000 rpm indicates the machine has a moderate spindle speed ional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2010, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, directional spindle stop, and cross slides with tool holders. It includes an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also comes with a loading magazine, integrated hydraulic unit, and an electrical control box. If you are looking to get high-quality turning capabilities consider the TORNOS DECO 10a machine we have for sale. Contact us for more information. Additional information Ijdpfx Aox D Dmtebgeia • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Movable headstock • Directional spindle stop S1 • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Tapping attachment for collet chuck ESX 12 • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Electrical control box • Motor voltage 400 V • Control voltage 24 VOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 12,000 rpm, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a "HYBRIDE 10+5" drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine. Ijdex D Dmyspfx Abgjia Additional information • Electrical control box • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Pivoting workpiece holder on the counter spindle • Directional spindle stop S1 • 3 pre-settable turning tool holders • 4 fixed tool holders • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Independent counter spindle • Tapping attachment for collet chuck ESX 12 • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mmOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2007, bar diameter (max.): 10 mm, number of axes: 7, This TORNOS DECO 10e was manufactured in 2007. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and multiple tool holders for versatile operations. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Ideal for precision turning with a lathe capacity of 10 mm. Consider the opportunity to buy this TORNOS DECO 10e Swiss type turning machine. Contact us for more information. 2 similar units available!Additional information • Movable headstock • Directional spindle stop S1 • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bush with filter • 3 pre-settable turning tool holders Iiodpex D Dmmofx Abgea • Motorization S2 • Tapping attachment for collet chuck ESX 12 • 4 fixed tool holders • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Electrical control box • Motor voltage 400 V • Control voltage 24 V • Lathe capacity 10 mmOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,578 h, bar diameter (max.): 8 mm, number of axes: 9, This Tornos Deco 10 was manufactured in 2005. A swiss type turning machine featuring a drum with loading magazine, a filter with a 25-liter capacity, and an integrated hydraulic unit. It supports various bar diameters up to 8 mm, ensuring versatility for precision work. Consider the opportunity to buy this Tornos Deco 10 swiss type turning machine. Contact us for more information. • Drum with loading magazine • 10+5" HYBRID drum • Integrated hydraulic unit • Support leg rear/front • 1100 mm center height • Filter with 25 liter capacity • Electrical: 380 V, 3-phase, 50/60 Hz motor voltage • Control voltage: 24 V DC • Bar compatibility (for 14 guide tubes): • 1–4 mm diameter bars Iiodpfx Ajx D Dm Tjbgea • 4 mm diameter bars • 8 mm diameter bars Additional equipment • 1 piece oil basin • 1 chip collecting basinOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2010, bar diameter (max.): 10 mm, number of axes: 7, This Tornos DECO 10e was manufactured in 2010. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and independent counter spindle. It includes a loading magazine with drum and an integrated 25-liter hydraulic unit. Ideal for precise small-scale turning, this machine also supports bar sizes from 1 to 10 mm without preparation up to 8 mm. Contact us for more information about this machine. Iodpfx Aex D Dndobgoia Additional information • Electrical control box • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Movable headstock • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12000 rpmOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: good (used), Year of construction: 2010, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 26 mm - Travel: 240 mm - Spindle speed: 8,000 rpm - Spindle drive power: 7.5 kW - Minimum resolution C-axis: 0.1° SUBSPINDLE - Max. bar diameter: 26 mm - Spindle speed: 6,000 rpm TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm BACK WORKSTATION - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 56,433 [hrs.] EQUIPMENT - CNC control: Fanuc - Motorization of driven tools - Driven guide bushing - Workpiece removal - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7 Isdpjyuyqkofx Abgjia - Bar feeder