Used Tos Whn for sale (8,388)

Year of construction: 1990, condition: good (used), Vat not included in price. Dcsdpfx Aed Hgf Rsh Uep

Year of construction: 1979, condition: ready for operation (used), Centre width: 2000mm, centre height: 315mm, turning diameter over bed/cross slide: 630mm/340mm, spindle bore: 80mm, speed: 1000rpm. Machine dimensions X/Y/Z: approx. 5000mm/1600mm/1600mm, weight: approx. 3200kg. An on-site inspection is possible. Dedpow Duuwjfx Ah Uocp

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Turning diameter over slide 270 mm Turning diameter in gap 700 mm Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Mounting main spindle Bayonet 6 Djdpfxjwu Du Is Ah Uecp Spindle bore 52 mm Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Year of construction: 1989, condition: excellent (used), machine/vehicle number: 0435532, MACHINE DATA Dcsdpfx Ahjd R Ri Uj Usp Machine type Hobbing Cutter – Gear cutter Manufacturer TOS Model FO-10 Year 1989 Serial Number 0435532 Condition Very good-almost new Yet in operation Max Module 14 Min Module 1.5 Max diam. 1500mm Max Width 450mm From Z9 teeth until Z448 Main drive 12 Kw Weight 9800Kg Original color RAL 6017 Book operation – service Dimensions L 3200 – W 1800 – H 2530 Full extra accessories – parts – all module cutters Ready to work without any expensive PRICE 70.000€

Condition: good (used), Year of construction: 2004, In good technical condition. GO 2004. CNC control based on an industrial PC. Dcodjwfnvwspfx Ah Ujp Measuring system: Tilting device for measuring the workpiece diameter with automatic corrections. Max. grinding length: 630 mm. Center height: 140 mm. Machine dimensions: Height 1600 mm, width 2300 mm, length 3750 mm, and machine weight approx. 3000 kg. Machine accessories Complete technical documentation for the machine DE Manuals for using the CNC control system CZ

Condition: good (used), Tos Hostivar cylindrical grinding machine Type: 1U Dodpfx Ajq H Ap Noh Ujcp X-path: 900 mm bed: 900 x 140 mm Turning diameter bed: 260 mm Chuck diameter: 120 mm Diameter grinding stone max: 320 mm Dimensions: 150x105x140 cm LxWxH

Condition: good (used), Defective Dedevpum Sspfx Ah Uocp Can be loaded immediately

Condition: ready for operation (used), Year of construction: 2002, Movement X-Axis Movement 3000 Y-Axis Movement 1000 Z-Axis Movement 1400 Dedpev U Eu Refx Ah Uscp Additional Equipment Additional Documentation: User manual available This 3-axis TOS KUŘIM FS 100 S/A3 vertical machining centre was manufactured in 2002. Consider the opportunity to buy this TOS KUŘIM FS 100 S/A3 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 215 mm, turning length: 1,250 mm, turning diameter: 380 mm, weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The lathe is in good condition seccond lathe SV18RA was purchased 10 years ago afte complete refurbish including digital measuring Dsdpfxeu R R I So Ah Uscp accesories uppon request offer valid for 2 machines with complete accesories, including dismantling and loading.

Condition: used, Manufacturer: TOS Type: BPH 20-A Working length: 600x200mm Dodpjv Tmp Hofx Ah Uscp

Condition: used, Year of construction: 1966, feed length X-axis: 1,400 mm, feed length Y-axis: 440 mm, feed length Z-axis: 450 mm, total height: 2,430 mm, overall weight: 5,100 kg, For sale is a milling machine manufacturer Tos type FA5V in working condition. Can be inspected under power. Dsdjt E I Drspfx Ah Ujcp The machine is sold without the magnetic table and milling cutter (only the machine) from location 61279 Grävenwiesbach

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding wheel diameter: 500 mm, total width: 2,300 mm, total length: 6,730 mm, total height: 1,800 mm, grinding diameter: 320 mm, workpiece weight between centers: 250 g, grinding wheel width: 80 mm, spindle speed (max.): 1,800 rpm, feed length X-axis: 350 mm, feed length Z-axis: 1,550 mm, Good morning, We have to offer a six months old CNC SWG32 x 1500 CNC machine with SIEMENS SINUMERIC 828D sL control (after a complete revitalization of TOS HOSTIVAR BUB32 machine) The machine is still in Lease at ING Lease. The machine has already been partially repaid, our company does not want to recover the repaid installments. The assignment of the lease applies only to the remaining installments to be repaid (the cost of the assignment is borne by our company). For more technical and financial details, I invite you to contact me at the e-mail address or by phone Specification of the machine: - Year of manufacture:2024 - Maximum grinding diameter: 320 - Maximum grinding length: 1500 - Supply voltage: 3 x 400V - Control voltage: 24V - DC - Metric system - Maximum permissible weight of objects clamped in the canine: 250 kg - Total travel distance in the X axis: 350mm - Rotation of the grinding wheel spindle: 50 - 1500 rpm (7.5kW) - Plunge grinding infeed speed range 0.03 to 20mm/min - Wheel diameter: 500mm Djdpfx Ahovkc D Ij Ujcp - Morse taper 5 - Measuring probe to determine the workpiece - Workpiece support - Electronic wheel (handheld panel)

Condition: reconditioned (used), Year of construction: 2001, , Basic information Manufacturer TOS SVITAVY Type PKSN 32 B Category Multiripsaws Shipping Delivery to be agreed Terms Technical parameters Maximum Working Width #### mm 400 Machine with simultaneous transport and processing of the element The machine is CE marked Used machine Minimum Working Length #### mm 330 Engine power #### kW 55 Supply voltage #### V 380-400 Safety Guards Completely renovated Electrically Controlled Adjustments Technically efficient Perfect condition Shank Diameter #### mm 70 With one tool spindle With noise reduction housing Cast iron body Feed Speed #### m / min 36 Spindle Lock Maximum cutting height #### mm 160 New Electricity New Mechanics New Pneumatics Dedpehixkhefx Ah Uecp New Painting Noise Level #### Db 70 Right and Left Rotation Automatic adjustment Very good condition Cutting width #### mm 400 Machine width #### mm 1800 Machining Width Saw blade diameter #### mm 400 Machine weight #### kg 3500 Machine dimensions #### x #### x #### mm 1600x1800x2500 Cutting Height Machining height #### mm 160 With freely adjustable speed With the transport of the element in the machine

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 844 12 64, turning diameter over cross slide: 215 mm, spindle bore: 40 mm, turning diameter: 380 mm, center height: 190 mm, center width: 1,250 mm, quill stroke: 120 mm, total length: 3,020 mm, total width: 950 mm, total height: 1,500 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 14 rpm, overall weight: 1,850 kg, quill mount: MK 3, workpiece weight (max.): 300 kg, Trade show lathe, available from stock. After Trens filed for bankruptcy, we made an effort and had TOS and later Trens lathes completely overhauled. All machines were disassembled down to the last screw. Here is a run-through of a general overhaul at our company: 1. Machine cleaning, disassembly of the individual machine components 2. Grinding: bed, slide, cross support, spindle, tailstock quill 3. Grinding + scraping of the upper support guideways, replacement: trapezoidal screw with nut and V-ledge 4. Scraping of the guide surfaces: spindle, slide, cross support, and tailstock to geometric positions according to the accuracy report 5. Replacement: screw with nut, V-ledge, and Multifix base body for the cross support (including 2 turning tool cartridges) 6. Complete disassembly and replacement of the necessary spare parts in the lock case, threaded housing, headstock, gear box, tailstock, cross support, and upper support Djdpfx Ajv Hzqxeh Uecp 7. Installation, replacement if necessary, of racks, repair of the lead screw and feed screw 8. Complete bearing replacement in all machine assemblies 9. Complete replacement of machine plates 10. Priming of the machine, sealing, sanding, polyurethane topcoat, and painting of the machine accessories - white RAL 9003, anthracite RAL 7016 11. New control cabinet with electrical components, replacement: main motor, rapid traverse motor, hydraulic pump, cabling, and LED lighting of the work area 12. Preparation of the accuracy report and the electrical test report 13. Inspection and machine acceptance at the factory All refurbished machines have a CE certificate and a 12-month warranty. CE version: - Chuck guard with limit switch - Front chip guard mounted on slide - Rear chip guard - Lead screw and feed screw covers - Brakes after emergency stop within 2 seconds Special accessories (used): - Three-jaw lathe chuck Ø 190 mm - Four-jaw lathe chuck Ø 190 mm - Three-jaw lathe chuck Ø 240 mm - Four-jaw faceplate Ø 320 mm - Support center for bed slide - Various chuck jaws (10 pieces) - Collet set Ø 2 - 25 mm with collet chuck + drawbar - Special collet set (10 pieces) with collet chuck - 4-way tool holder

Condition: refurbished (used), Year of construction: 2000, I sell the top + bottom thicknessing machine TOS Svitavy F2T 80 Max. working width 800mm Max. working height 200mm Spindle 4-knives 800x125mm 1+1 top pressure rollers with anti kickback device. 2 bottom rollers in table for better feeding of wet or heavy parts Possibility of setting up the height of the bottom rollers each separately. Working thickness adjustment motorical with mechanical readout. Possibility of sensitive setting up the working height mechanically with manual wheel. Dcodpew Andcjfx Ah Usp Total weight 1000kg ! Machine in stock in Kežmarok, Slovakia, possibility to test.

Condition: used, Maximum grinding length: 1000 mm Maximum wheel diameter: 320 mm Bore: 30 mm Dcodpov Taafefx Ah Uep Manufacturer: TOS

Condition: excellent (used), track width: 360mm Djdpfxju Evqnj Ah Uocp shaft width: 350mm max disc diameter: 350mm disc bore diameter: 80mm max cutting height: 120mm electric lifting of the saw shaft electric lifting of the body smooth regulation of feed speed feed motor: 2,5kW main motor: 45kW

Condition: like new (used), Year of construction: 2024, functionality: fully functional, grinding length: 1,650 mm, grinding diameter: 400 mm, We offer a new BUB40 x 1500 NC machine equipped with a MITSHUBISHI NC controller. The machine is still under lease with ING Lease. It has been thoroughly refurbished based on the TOS HOSTIVAR BUB 40 model by FAS GŁOWNO. Technical data: • Maximum workpiece diameter: 400mm • Maximum workpiece length: 1500mm • Centre height: 200mm • Distance between centres: 1500mm • Minimum grindable workpiece diameter with a 380 mm grinding wheel: 20mm • Tailstock quill stroke: 40mm • Maximum tailstock clamping force: 4000N • Spindle headstock centre taper: ISO 296-1991/Morse 5 • Tailstock centre taper: ISO 296-1991/Morse 5 • Maximum workpiece weight between centres: 500kg • Maximum workpiece weight in chuck (including chuck): 100kg • Machine width (with enclosure): 6650mm • Machine depth (with enclosure, without control panel): 2400mm • Machine height (with enclosure): 1850mm Dodpfx Aswzkywoh Ujcp • Machine weight: 7000kg • Total power requirement: 38kVA Grinding spindle: • Standard grinding wheel dimensions: 500 x 80 x 203.2mm • Grinding spindle drive motor power: 11kW • Grinding spindle rated speeds (for 430 mm / for >430 mm and 500 mm wheels): 2000 / 1744 rpm • Grinding headstock traverse servo motor power: 2kW • Grinding headstock traverse servo motor torque: 9.5Nm • Maximum continuous X-axis traverse speed: 2m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum continuous X-axis traverse speed: 6m/min • Minimum X-axis grinding wheel increment: 0.001mm • Maximum grinding wheel increment in INC mode: 0.1 mm • Table traverse servo motor power: 3.5 kW • Table traverse servo motor torque: 16.7 Nm Workpiece spindle: • Workpiece spindle speed range: 1 – 150 rpm • Workpiece spindle servo motor power: 3.5kW • Workpiece spindle servo motor torque: 16.7Nm More information available upon request via email or phone.

Year of construction: 2009, condition: reconditioned (used), 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 4-SIDED 5-HEAD PLANER TOS SVITAVA LIGNUM 5-HEAD PLANER 240 MM WITH A GROOVED TABLE AFTER A COMPLETE RENOVATION Dsdpfendcg Nsx Ah Ujcp FWH 225mm 23kW total power

Condition: good (used), functionality: fully functional, BUA 25/1000 Dcedswug A Iepfx Ah Uep

Condition: good (used), Year of construction: 1983, FGSH 50 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Double-torsion head (new bearings, new gears). Beam to the level with the eyepiece. Parameters: Table 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Dcedpfxedqp Euo Ah Uep Speed ​​range 45-1400 rpm. Main engine power 15 kW. The demand for a power of 23 kW. Dimensions: Length X Width X Height: 3200 X 3475 X 2620 mm. Weight 6500 kg.

Condition: good (used), Manufacturer: TOS Type: Brh-20A Working length: 600x200mm Dcsdpfsv S Ufaox Ah Uep Magnetic table: 600x200mm Maximum disc diameter: 200mm

Condition: new, Year of construction: 2025, center height: 160,200,250 mm, workpiece weight (max.): 750 kg, grinding length: 100,020,003,000 mm, grinding wheel diameter: 500,600 mm, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, grinding diameter: 320,400,500 mm, quill stroke: 50 mm, spindle speed (max.): 560 rpm, spindle speed (min.): 1 rpm, grinding spindle speed: 1,400 rpm, warranty duration: 24 months, Equipment: rotational speed infinitely variable, Main technical data : Swing diameter mm 320,400,500 Distance between centres mm 1000,1500,2000,3000 Standard wheel size (diameter x width x bore) mm 500 x 200 x80 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°) +10/- 30 Workhead swivel (°) 90 Tabel swivel (°) 0 Workhead spindle speed, infinitely variable RPM 2-500 Workhead sleeve taper bore Morse 5 Tailstock sleeve taper bore Morse 5 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 2.5 Dcodpopy A Iusfx Ah Uop Wheelhead motor kW 11 Total power demand of machine kW 45 - between centres kg 500 Weight of machine with standard accessories kg approx 10000 Dimensions of machine approx. mm 8 000x 2 980 x 2 200

Condition: good (used), functionality: fully functional, Machine weight: 1725 kg Dcsdpfx Ahevzkzcs Ujp Total machine power: 3 kW Table clamping surface: 800x400 mm Longitudinal table movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm Working longitudinal feed - x-axis: 8-400 mm/min Working transverse feed - z-axis: 8-400 mm/min Working vertical feed - y-axis: 8-400 mm/min Rapid feed x/z/y: 2000/2000/1000 mm/min Max. workpiece weight: 400 kg

Year of construction: 1983, condition: good (used), FGSV 32 TOS KURIM milling machine. Year of manufacture 1983 (CZE). Parameters: Table 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Speed ​​range 35-1800 rpm. Dodeh Ir Rmjpfx Ah Uecp Distance between spindle and table 140 - 590 mm. Distance between spindle and column 120 - 520 mm. Max. table load 500 kg. Main engine power 11 kW. The demand for a power of 15 kW. Dimensions: Length X Width X Height: 2735 X 2425 X 2475 mm. Weight 4200 kg.