Used Trumpf Tlc Cut 5 for sale (384)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 59,480 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 600 mm, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, Predecessor model of the more popular TruLaser Cell series TECHNICAL DETAILS Category: 5-axis 3D laser cutting system Condition: Fully serviced (twice a year by Trumpf UK) Last service: January 2019 New vacuum pump installed: May 28, 2019 Dsdpovy Ehzofx Agrjcn Working area X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 600 mm B-axis (rotation axis): +100° C-axis (rotation axis): n x 360° Laser source Model: TRUMPF TLF 3200 Turbo Laser power: 3.2 kW Pilot laser: Available (for programming support) Control & software CNC control: Siemens 840D with 3.5" floppy disk drive Network connection: Available (including analog modem for Remote maintenance) Software: ToPs 100 with nesting module & IGES Translator + ToPs 800 with fixture construction & 3D IGES Translator MACHINE DETAILS Beam switched on: 14,922 h Laser switched on: 59,480 h Dimensions: 3.0 x 1.5 x 0.6 m EQUIPMENT - Logbook function for laser power monitoring - Power supply cabinets - Closed water cooling with air circuit - 5” high-pressure cutting optics - Set-up device - Class 1 laser safety housing with manual sliding door - Extraction unit with particle filter (2,000 m³/h) - Stationary work table

Condition: good (used), Year of construction: 2010, laser power: 4,000 W, Trumpf 5 axis laser machine, Year of manufacture 2010, Siemens control, travel X/Y 4000/1500 mm, 1 burning head, laser power 4 KW, Laser On 47950 hours, beam on 6200 hours, ADC cutting head 155 mm, Positioning laser diode, Djdsvbdy Ejpfx Agrecn Teach panel, power cycles, Trumpf remote connection, Machine weight approx. 19,000 kg,

Condition: excellent (used), Year of construction: 2008, table length 4000 mm table width 1500 mm burner heads 1 Control SIEMENS 840D Capacity 6000 Watt speed 10 m/min weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room Dcsdpfeu N I Ersx Agren - Laser TruFlow 6000 - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding

Condition: good (used), Year of construction: 2003, operating hours: 82,000 h, functionality: fully functional, laser power: 5,000 W, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, controller manufacturer: Siemens, laser hours: 33,000 h, control type: CNC control, sheet thickness stainless steel (max.): 20 mm, laser type: CO₂ laser, Equipment: cooling unit, dust extraction, safety light barrier, AVAILABLE AT SHORT NOTICE! TRUMPF Trumatic L 3050 – 5 kW MACHINE WAS COMPLETELY OVERHAULED IN 2018! TECHNICAL DATA: Manufacturer: TRUMPF Model: Trumatic L 3050 – 5 kW Year of manufacture: 2003 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 5,000 watts Max. sheet thickness (steel): 25 mm Max. sheet thickness (stainless): 20 mm Max. sheet thickness (aluminium): 12 mm Operating hours: approx. 82,000 h / 33,000 h STANDARD FEATURES: - Enclosed machine frame with integrated laser unit - Laser unit: CO2 laser TLF 5000, high-frequency excited, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: Gantry drive combined with linear direct drives Dcodpfx Agjxg Nh Uorjn - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for producing small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change device for cutting head - Automatic sheet edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Positioning laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - Control SIN 840D: Open PC-based control, easy operation, online help, diagnostic functions, maintenance log, technology data, teleservice - Shopfloor programming ToPs 100 lite - Safety: multi-beam light barriers, fully encapsulated and nitrogen-flushed beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network port - Electrical equipment for 400 V / 50 Hz three-phase power - Paint finish: textured paint white RAL 9002 / gentian blue RAL 5010 ADDITIONAL EQUIPMENT: - Additional laser cutting head with 9-inch lens

Condition: used, Year of construction: 2019, machine/vehicle number: S1541C0016, 5-axis machining with flying optics, CNC control SIEMENS SINUMERIK 840D SOLUTIONLINE with TRUMPF HMI, travel ranges: X-axis 4000 mm, Y-axis 1500 mm, Z-axis 750 mm, extended Y-axis travel up to 2000 mm, laser power 4000 watts, laser unit TRUMPF TRUDISK001, with separate cooling unit and compact dust extractor. NOTE: The system is maintained annually by TRUMPF, corresponding maintenance records are attached! Dodpfxoxccffo Agrecn

Condition: used, Year of construction: 2012, Working hours laser on: 51942 h Working hours beam on: 29734 h Laser power: 5000 Watt Control: Siemens 840 D Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. copper: 10 mm Max. brass: 10 mm Length: 9950 mm Width: 4600 mm Height: 2400 mm Dcodowmynzspfx Agren Machine weight: 12000 kg Standard configuration - Closed machine frame with integrated laser unit - Torque drive in combination with direct linear drives- Closed beam guidance via light conducting cable- Chiller for machine cooling- Integrated electrical cabinets with inside light- Automatic pallet changer in longitudinal direction- Conveyor belt for small parts / slug- Work area lighting- Positioning laser diode- Spray device- PierceLine- FocusLine- NitroLine- PlasmaLine- Automatic nozzle cleaning  TRUMPF Laser:- Solid-state laser TruDisk 3001- Light conducting cable- Chiller for laser cooling- Excitation by pumping diodes- Laser power control- Logbook function laser Cutting head:- Universal cutting head with complete adaptive lense system- Safety glass to avoid lense contaminationControlLine: automatic height control and sheet edge detection Control Unit:- Shop floor programming- Control Siemens Sinumerik 840D SL- 17" Touch screen- Integrated technology tables- Automatic shut-down device- FastLine- Fast re-producing- Teleservice- Data transmission USB-interface:- RJ45 network connection Safety:- CE lable- Light barriers- Multi chamber exhaust syste- Integrated compact dust extractor- Machine enclosure with certificated window (right door)- Electrical curl up roof Extended machine accessories Automation

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, operating hours: 39,500 h, laser power: 5,000 W, TRUMPF TruLaser 5030 – 5 kW Classic TECHNICAL DATA: Manufacturer: TRUMPF Model: TruLaser 5030 – 5 kW Classic Year of manufacture: 2009 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 5,000 Watt Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 12 mm Operating hours: 39,500 h STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit - Laser unit: CO2 laser TruFlow 5000, high-frequency excited, maintenance-free turboradial blower, chiller, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: Gantry drive combined with linear direct drives - Quick-change cutting head system - PlasmaLine - Fast processing with SprintLas for all sheet thicknesses - ContourLine for production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Automatic sheet edge detection - ControlLine capacitive height control and process regulation - Positioning laser diode - Automatic focus position adjustment (FocusLine) - Automatic nozzle cleaning - PierceLine Dsdpfx Agow Rytqorscn - NitroLine high-pressure cutting - Laser power control - Automatic shutdown - Work area lighting - SIN 840D control: PC-based open control, user-friendly operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Shop floor programming - Safety: Multi-beam light barriers, fully enclosed beam guidance with nitrogen purging, monitoring system, multi-chamber extraction and compact dust collector, protective cabin - Network connection: RJ-45 network port via teleservice installation - 3.5" floppy disk drive - TFT color monitor - Electrical equipment for 400 V / 50 Hz three-phase current - Finish: Textured white RAL 9002 / gentian blue RAL 5010 ADDITIONAL EQUIPMENT: - Additional laser cutting head with 9-inch lens OTHER: - The machine underwent a technical overhaul in 2021

Condition: excellent (used), functionality: fully functional, operating hours: 58,000 h, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld Dodpfxorgaw Ho Agrscn - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Condition: excellent (used), Year of construction: 2014, Operating hours: 78,000 hours 5 kW resonator Annual maintenance by Trumpf Djdpfx Ajwd Ng Uegrscn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Dedoxlctzspfx Agrscn Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 49,200 h, machine/vehicle number: Aufbau und Inbetriebnahme möglich, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, workpiece weight (max.): 900 kg, warranty duration: 6 months, working range: 3,000 mm, +incl.preparation LiftMaster 1530; Liftmaster against surcharge Standard equipment: - Closed machine frame with integrated laser unit - Automatic pallet changer - Longitudinal conveyor belt for small parts and waste - Drives: Gantry drive in combination with linear direct drives - Cutting head quick-change device - Laser cutting head 250mm lens - Progr. cutting gas selection/pressure adjustment - APC capacitive height and process control (ControlLine) - AutoLas Plus (FocusLine) - Laser power control - Position laser diode - Hi-Las high-pressure cutting (NitroLine) - Sprintlas (FastLine) - ContourLas (ContourLine) - PMS plasma sensors (PlasmaLine) - Lens monitoring (LensLine) - Autom. sheet metal outer edge detection - Microweld - Automatic nozzle cleaning Djdpfx Aeuviyqegrjcn - Oil spraying device - Work area lighting - Automatic switch-off - Safety devices (multi-beam light barriers, encapsulated beam guidance) - Multi-chamber extraction system - Compact dust extractor - ToPs 100 lite -RJ 45 network connection - USB interface - TFT color screen - Detailed operating instructions

Year of construction: 2012, condition: ready for operation (used), Control Unit Brand TRUMPF This TRUMPF TruLaser 8000 was manufactured in 2012. A CO2 laser cutting machine featuring dual 3.6 kW power and a large working area of 2500x8000 mm. Consider the opportunity to buy this TRUMPF TruLaser 8000 CO2 laser cutting machine. Contact us for more information. Dcedpfx Aexg Uk Usgrjn Application Types Cutting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 12,024 h, machine/vehicle number: A0240A0643, sheet thickness (max.): 20 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS Working area X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Maximum cutting thickness: 20 mm Maximum workpiece weight: 1,700 kg Speed Simultaneous: 140 m/min Control: Siemens Sinumerik 840D SL Accuracy Position deviation Pa: 0.05 mm Mean positional scatter Psmax: 0.03 mm Laser: TruFlow 4,000 MACHINE DETAILS Connected load: 4,000 W Dimensions & Weight Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Weight: 13,000 kg EQUIPMENT Separate control unit and cooling Trumpf LoadMaster Exhaust system Trumpf/Handte MF-L40/8/1 (Max. extraction capacity: 2,000 m³/h) Dcjdpfxexgqv He Agron

Condition: excellent (used), Year of construction: 2008, Beam on: 21,660 h Laser on: 42,130 h Dcodpfx Aexfim Isgrjn

Condition: excellent (used), Year of construction: 2017, power: 3 kW (4.08 HP),   High speed cutting with precision Tower and Sheetmaster NOT included Low operation cost Compact foot print Change table ( liftmaster and tower not included Possible to cut reflective material (copper, brass) Mild steel : 20 mm Stainless: 15 mm Aluminium: 12 mm Copper / Brass: 6 mm - User-friendly interface with graphical programming- Supports automatic nesting, cutting parameter libraries, and real-time diagnostics- Interfaces seamlessly with TRUMPF's automation modules and networking systems- Real-time control of laser, motion, and auxiliary systems Dsdpfx Agsxda I Herscn Working area X Axis: 3000mm Working area Y Axis: 1500mm Working area Z axis: 115mm Table Length: 3000mm Table Width: 1500mm Power resonator: 3kW / Amp Feed rate X-Axis: 170000mm/min. Feed rate Y-Axis: 170000mm/min. Feed rate Z-Axis: 170000mm/min. Sheet master loading arm:No Sheet tower storage: No Control: TrueTops Cutting hours: 25000H Length: 9000mm Width: 5000mm Height: 2200mm Weight: 7650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, CNC Laser Cutting System TruLaser 3030 (L20) 4000 Watt X Working area max.: 3000 mm Y Working area max.: 1500 mm Z Working area max.: 115 mm Control: Siemens Sinumerik 840D SL Laser power: 4000 Watt Operating hours: 35,881 h Laser on-time: 18,757 h Sheet thickness St. max.: 20 mm Sheet thickness SS max.: 15 mm Sheet thickness Al. max.: 8 mm Standard machine equipment Machine - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Torque drive combined with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Chiller unit - Automatic pallet changer (longitudinal) - Wide longitudinal conveyor belt - Ergonomic control panel with color touch display - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Transport and installation device TRUMPF Laser - CO2 laser TruFlow 4000 with optimized standby mode - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control - Laser power control - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change device (UTI) with bus interface - LensLine with condition monitoring - ControlLine: height control and sheet edge detection Control - SINUMERIK 840D SL control Djdexdmgcepfx Agrocn - 17" color touch screen - Easy operation - Simple workshop programming - Advanced workshop programming - Fast re-manufacturing - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction unit - Machine enclosure with Macrolon panels

Year of construction: 2007, condition: ready for operation (used), Control Unit Brand TRUMPF Dedpexg Uk Ijfx Agrecn This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information. Application Types Cutting

Condition: excellent (used), Year of construction: 2011, Beam on: 26,620 h Dcjdpfx Agsxfh Evjrsn Laser on: 49,485 h

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand TRUMPF Main Drive Laser power 5000 W Dcodpfsxgwbvox Agrjn This TRUMPF TruLaser 5030 classic was manufactured in 2006. It features a 5kW power capacity. Notably, it includes a Liftmaster and an extra Liftmaster for spares. This machine is ideal for those looking to get high-quality laser cutting capabilities. Contact us for more information about this machine. Application Types Cutting

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on: 24,314 h Dedpfx Agexfin Serjcn Laser on: 55,176 h

Year of construction: 2014, operating hours: 30,843 h, condition: ready for operation (used), Main Drive Number of axis 3 Additional Equipment Dsdpfexgwctsx Agrecn Resonator: 4kW Co2 This 3-axis TRUMPF TruLaser 3030 was manufactured in 2014. It features a 4.0 kW CO2 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 26,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, cutting speed: 300,000 mm/min, workpiece weight (max.): 1,800 kg, TECHNICAL DETAILS Travel ranges X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Maximum workpiece weight: 900 kg Laser: TruDisk 5001 Maximum power: 5,000 W Djdpfx Agjxd Afherecn Wavelength: 1.03 µm Maximum sheet thickness Mild steel: 25 mm Stainless steel: 20/25 mm Aluminum: 20/25 mm Copper: 10 mm Brass: 10 mm Speed Simultaneous: 265 m/min Accuracy Positioning deviation Pa: 0.05 mm Maximum mean positioning deviation Ps: 0.03 mm MACHINE DETAILS Control unit: Siemens Sinumerik 840D SL Dimensions & Weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg Power consumption Total system: 7–39 kW Resonator: 5 kW fiber Beam on hours: 26,000 h Operating hours: 68,000 h

Year of construction: 2014, condition: ready for operation (used), Main Drive Dedpfoxgwcgjx Agrscn Number of axis 3 This 3-axis TRUMPF TruLaser 3030 Fiber was manufactured in 2014. It features a 3.0 kW fiber resonator and handles a maximum sheet size of 3000x1500. Ideal for precise fiber laser cutting, consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber laser cutting machine. Contact us for more information. Application Types Cutting

Year of construction: 2008, operating hours: 23,749 h, condition: ready for operation (used), Main Drive Laser power 5000 W Number of axis 3 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 115 mm Workpiece weight 900 kg This 3-axis TRUMPF Trulaser 5030 was manufactured in 2008. It features a robust 5000W laser and can handle sheet metal up to 25mm thick. With a maximum working area of 3000mm x 1500mm and speeds up to 300m/min, it's ideal for high-speed cutting. Consider the opportunity to buy this TRUMPF Trulaser 5030 fiber laser cutting machine. Contact us for more information about this machine. Dcedpfxexa H Tbj Agron Application Types Cutting

Year of construction: 2015, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Additional Equipment HERDING Fume extraction in working area: 2000 Nm3/h Cooling unit Automatic sliding door "CE" Automatic two-level redundant working range protection "CE" Dcodjxirnvopfx Agron This TRUMPF TruLaser Cell 7040 was manufactured in 2015. It features a large working range with dimensions of 4000x2000 mm and a Z-axis height of 750 mm. Equipped with a powerful TruFlow 4000 Watt CO2 laser, it excels in both thin and thick material cutting. Additional features include CNC automatic scanning, height detection, and a Siemens 840D control system. Consider the opportunity to buy this TRUMPF TruLaser Cell 7040 CO2 laser cutting machine. Contact us for more information. Application Types Cutting