Used Turning Device for sale (18,737)

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Kedewhui Aspfx Anyelu Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim

Condition: new, Year of construction: 2022, HOLZKRAFT Raw Air Extractor ASA 7703 Mobile chip extraction system with a rotating extraction unit and four extraction nozzles (Ø 100 / 120 mm) for milling, planing, and sawdust (not for dust) Nominal flow rate: 7,700 m³/h Extraction nozzle outlet: 1 x Ø 100 | 3 x 120 mm Extraction nozzle inlet: 1 x Ø 260 mm Vacuum pressure: max. 2,800 Pa Filter area: approx. 11.96 m² (2 x 5.98 m²) Chip bag volume: 2 x 290 liters Power consumption: 4.8 kW | 400 V - 50 Hz Idle speed: 2,950 rpm Sound pressure level: max. 98.3 dB(A) Dimensions (L x W x H): 1,900 x 670 x 2,800 mm Net weight: approx. 88 kg Includes 2 fine filter bags and 2 chip bags Availability: Short-term Storage location: Flörsheim Klsdpfxowhui Ne Anyeu

Condition: new, mobile extraction unit exhibition piece Dimensions and weights Length (product) approx. 1000 mm Width/depth (product) approx. 500 mm Height (product) approx. 2100 mm Net weight approx. 39 kg Chip collection volume 110 l Nominal external diameter extraction inlet 203 mm Nominal external diameter extraction outlet 1 x 100, 1 x 120 mm Electrical data No-load speed 2950 min⁻¹ Connection voltage 230 V Mains frequency 50 Hz Input power 1.5 kW Output power 1.05 kW Filter Filter area 1.92 m² Noise emission Kljdpfxjw I Uu Rs Anyou Maximum sound pressure level 85.7 dB(A) Airflow Nominal airflow 1900 m³/h Maximum negative pressure 1700 Pa SCOPE OF DELIVERY Fine filter bag, Chip collection bag Availability: short-term Warehouse location: Hochheim

Condition: used, Year of construction: 2012, used extraction unitYear of manufacture: 2012Rated capacity: 2789 m³/hFilter surface: 1.8 m²Max. negative pressure: 1668 PaChip collection volume: 160 lMotor: 1.1 kW, 400 VExtraction port: 1 x 120 mm, 1 x 100 mmAvailability: short-termLocation: Hochheim Ksdpfx Anex Rv Dtsyelu

Condition: used, Multi-beam safety light curtain, 1 transmitter + 1 receiver + 2 reflectors FIESSLER 1 transmitter unit Type: ULVT / 105 S No.: 69833 Protective field height: 1500 mm Range: 24 meters Response time: 13 mS Detection capability: 30 mm Supply voltage: 24 Volt DC 1 receiver unit No.: 69832 Type: ULVT / 105 E Protective field height: 1500 mm Range: 15 to 30 meters Response time: 13 mS Detection capability: 30 mm Supply voltage: 24 Volt DC Installation cross-section: 41 x 61 mm Overall length: 1600 mm - mounted on a support column made of 80 x 80 mm aluminum system profile with a base plate - Height of support column: 2020 mm 2 mirror reflectors, type SASU 1500 column (impact protection) with mirror Protective field height: 1500 mm Installation cross-section: 90 x 87 mm Overall length: 1850 mm Total height with pallet: 2180 mm Total weight with pallet: 116 kg Very good condition Ideal for presses, eccentric presses, hydraulic presses, plate shears, bending presses, or robots Ksdezcf U Rspfx Anyslu as a protective fence around machines such as nibbling machines or automated systems.

Condition: used, Year of construction: 2000, Hardinge VMC 600 II CNC Vertical Machining Centre with Fanuc Series O-MD CNC Control, Table Size 750mm x 500mm, 20 Tool ATC, BT40 Spindle Taper, Manuals & BT40 Spindle Tools. S/No. NVAAOF0060 (2000) Location: This lot is located in Burton on Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Kljdjzdtkhepfx Anyju

Condition: excellent (used), functionality: fully functional, Tool holders, tool mountings - VDI40. The holders have been inspected and are in very good, almost like-new condition. The outstanding quality of well-known manufacturers guarantees high repeatability and very long service life: Order No.: 435_C1 → In stock: 2 units; Price: €56.00/unit Order No.: 430_C2 → In stock: 3 units; Price: €56.00/unit Order No.: 432_B4 → In stock: 2 units; Price: €56.00/unit Order No.: 433_B4 → In stock: 2 units; Price: €56.00/unit For orders of 4 units or more, the above prices include shipping within Germany (BRD). Single unit price: €65.00 net each, plus shipping costs. B3 with right-hand rotation; B4 with left-hand rotation; C1 with right-hand rotation; C2 with left-hand rotation. ----- Short reverse VDI radial tool holder. Tool holder for mounting external turning tools in the normal position, i.e., with carbide inserts facing upwards: C1 with right-hand rotation; C2 with left-hand rotation. Shipping costs: on request. ----- Dimensions: D = 83 mm d-2 = 83/40 mm (45.52) H = 32.5 mm L1 = 75 mm L2 = 22 mm l-4 = Kedpfx Anszf Hqdeyslu ----- Further VDI40 holders available in our other listings, e.g., VDI40 Form E2 For drilling tools with cylindrical shank with internal and external coolant supply Surface hardened, blackened, and ground finish.

Condition: used, length 800 mm width 500 mm height 1000 mm weight of the machine ca. 1,1 t Klsdpjtv Icujfx Anyeu 2 units - Weight approx. 550 kg/each

Condition: used, Year of construction: 2008, Technical details: Kjdpfx Aezcn Tpenyjlu x-travel: 850 mm y-travel: - mm z-travel: 315 mm swing diameter: 420 mm spindle speed:: 3400 U/min feed power: 11 kN tool taper: VDI 50 workpiece height max.: 160 mm workpiece diameter:: max. 340 mm tool changer with: 12 places feed power: 11 kN Total power requirement: 45 kW Weight approx.: 10 t complete plant: 5,3 x 4,19 x 3,5 m dimension machine xH: 3,8 x 1,45 x 3,5 m • Highly productive CNC vertical turning machine • Perfect for high-volume and mass production • Loading time: 4–6 seconds (depending on workpiece and clamping device) • Chip-to-chip time: 8–10 seconds (depending on process and workpiece) • Spindle nose: DIN 55 026 – Size 11 • Front spindle bearing diameter: Ø 160 mm *

Condition: used, Year of construction: 2007, Technical details: x-travel: 680 mm y-travel: - mm z-travel: 250 mm swing diameter: 340 mm spindle speed:: 3400 - 4300 U/min tool changer with: 12 places spindle diameter in front bearing: 120 mm rapid traverse x + z axis: 45 / 30 m/min Total power requirement: 43 kW Weight approx.: 12 t complete plant: 9,0 x 4,0 x 3,3 m dimension machine xH: 3,8 x 1,5 x 3,3 m • Highly productive CNC vertical turning machine • Perfect for high-volume and series production • Commonly used in the automotive industry • Includes various accessories and live tooling (powered tools) * Klodpfezcn Tcsx Anyeu

Condition: used, Year of construction: 2000, max swing 700 mm, X/Y 255/520 mm, 12-position upper tool turret and 8-position lower tool turret with driven tools, measuring head, tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15 t Kedpoym Sx Dofx Anyslu

Condition: not inspected (used), Year of construction: 2001, operating hours: 31,782 h, functionality: unexamined, overall weight: 5,500 kg, Without tools Kodpfx Anozbqg Njyjlu

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: PEMA, swiveling, hydraulically height-adjustable welding rotator -Type: 1500AHM -Load capacity: 15000 N -Control: with remote control -Base plate: Ø 850 mm -Speed: 0.02 - 1.6 rpm Right/Left rotation -tiltable: hydraulically -Height adjustment: hydraulic Klsdpjzbutasfx Anyju -Transport dimensions: 850/1650/H970 mm -Weight: 820 kg

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 220 mm -Rollers: Ø 185 x 117 mm Klsdpfx Anjzbrqpjyju -Load capacity: kg -Dimensions each: 1070/200/H240 mm -Submission/Price: complete -Transport dimensions: 1070/410/H240 mm -Weight: 265 kg

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Klsdpfx Aozc Id Uenysu Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower.

Condition: excellent (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, Equipment: documentation/manual, EQUIPMENT: FANUC 31i control system Back-end machining Synchronous spindle Kljdezcdbijpfx Anysu Powered tools C-axis Part conveyor Oil mist extraction system Fire extinguishing system Bar feeder magazine FMB TURBO 3-36

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 341883, TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter 270 mm Maximum diameter above the cross slide 160 mm Center height above the cross slide 83 mm Maximum diameter above the machine bed 430 mm Turning length (depending on equipment) 630 mm Headstock: Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories. Accessories for SCHAUBLIN chucks B45/F66 Maximum bar capacity, dia. 36 mm/60 mm Automatic chuck, standard dia. 210 mm Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW Maximum torque at 100% / 50% duty cycle 135/165 Nm Maximum spindle speed 4000 min-1 Spindle positioning, increment 0.1° C-axis: Programmable increment 0.001° Spindle lock 80 Nm Pneumatic clamping cylinder 3400 daN Cross slide: Transverse travel, X-axis 230 mm Resolution along the radius 0.0005 mm Drive by AC motor, rated torque 3 Nm Ball screw, X-axis pitch 32 x 5 mm Longitudinal travel, Z-axis 720 mm Resolution 0.001 mm Drive by AC motor, rated torque 6 Nm Ball screw, pitch 32 x 10 mm Feeds: Working feeds, X/Z axes, stepless 0-5000 mm/min Rapid traverse rates, X/Z axes 8/10 m/min Feed force, X/Z axes 420/670 daN Turret system: Number of tool stations 12 Number of rotating tool stations 6 Drive by AC motor, intermittent duty power 3.7 kW Maximum intermittent torque 36 Nm Maximum drive speed 5000 min-1 Standardized tool holder 0VDI 30 Maximum cross-section of cutting tools 20 x 20 mm Integrated coolant system Indexing in both directions of rotation Coolant system: Tank capacity 120 liters Pump flow rate 10 l/min Kodezb U Epepfx Anyslu Pressure 5 bars Inventory 2230043 including: 1 Fanuc 18i control unit 1 A2-6 headstock 1 VDI 30 turret with 12 positions for 6 rotating tools 1 pneumatically operated steady rest 180-65.200 1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck 1 Brucker CM5 rotating center 1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552 1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550 1 KENNAMETAL ESX-25 dito, without collet EX 1 EWS ESX-25 dito, without collet EX 4 radial tool holders, short, left-hand, Form B2 ref 4100.0100 1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet 1 dito without EX25 collet 3 threading collets Ø 4.5 – 6 and 8 mm 1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124 1 dito bore Ø 32 mm ref 4100.00107 1 dito bore Ø 20 mm ref 4100.00105 1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108 1 dito Ø 10 ref 4100.0109 1 dito Ø 12 ref 4100.0110 2 dito Ø 16 ref 4100.0111 1 dito Ø 20 ref 4100.0112 1 dito Ø 25 ref 4100.0113 1 dito Ø 32 ref 4100.0115 1 dito Ø 32 GARANT, long 5 steel protection plugs, Form Z2 ref 4100.00130 1 axial tool holder, left-hand, force C4 ref 4100.00103 1 CM 5 pneumatically operated steady rest ref 180-65.200 1 separate support for microscope ref 180-60.005 1 coolant system OPTION 1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT Unless otherwise stated, the technical data is provided without guarantee.

Condition: reconditioned (used), Year of construction: 2010, operating hours: 31,600 h, functionality: fully functional, machine/vehicle number: 3078, Travel range Z = 400 mm Y = 200 mm X = 410 mm Power / thrust force Z-Y 2.5 kW / 550 daN (linear motor option = 7.2 kW / 350 daN) X 4.8 kW / > 550 daN X-Y-Z Travel speed 40 m/min (linear motor option = 50 m/min) X-Y-Z-W Acceleration 8 m/s2 / 0.8 g (linear motor option = 10.4 m/s2 / 1.1 g) X-Y-Z-W Resolution 0.0001 mm MAIN SPINDLE + C1 Power 7.5 kW Torque / peak 22 / 28 Nm Measuring system direct Resolution 0.0001° Accuracy 0.001° Bar passage Ø 32 mm Turning spindle speed 72,000°/min Turning clamping force 4,900 N at 6 bar AXIS B (TILT AXIS OF TOOL HOLDER SPINDLE) Power 4.3 kW Torque / peak 119 / 226 Nm Angular travel -25° / +115° Measuring system direct Resolution 0.0001° Accuracy 0.001° Rotational speed 36,000°/min Supporting torque 200 Nm TOOL HOLDER SPINDLE Power 5 kW Torque 6 to 800 min-1 Max. speed 30,000 min-1 Clamping force of the tool holder 2,000 N Blocking torque mechanical blocking via straight-tooth gearing Tool shank taper HSK 40 (A or E) Tool clamping power 1000 daN TOOL CHANGER Number of stations 30 (for HSK 40) CNC control Fanuc 30i/31i type Y-axis (transverse axis) Travel 200 mm Power 4.8 kW Feed power 240 daN Resolution 0.0001 mm Max. rapid traverse G0 50 m/min Max. feedrate G1 20 m/min Measuring system glass scale Kjdpfxoyf Ange Anyolu Z-axis (longitudinal axis) Travel 400 mm Power 7.2 kW Feed power 360 daN Resolution 0.0001 mm Max. rapid traverse G0 50 m/min Max. feedrate G1 20 m/min Measuring system glass scale Includes coolant unit 8 kW and integration of an emergency stop system. Inventory no. 2220114, machine comprising: CONTROL Fanuc 30i/31i, with 14’’ screen LINEAR MOTOR FEED OPTION for Y and Z axes TURNING-MILLING FUNCTION with integration of an indexing system (8 positions) on the tool holder spindle, transformation of the tool magazine for HSK40-A tool holders, increase of the spindle speed to 5500 min-1 4-POSITION PART RECOVERY UNIT “PRM” FOR MACHINING THE 6TH FACE: In idle state, the unit is located protected under the main C1 spindle. The recovery unit moves on the W-axis, which is parallel to the C-axis. Max. speed W-axis: 40 m/min. Travel on W-axis: 310 mm. With 2 vices – power at 5 bar: 3500 N 1 tailstock INCREASED SPINDLE PASSAGE increase from 1 to 50 mm (main spindle) TOOL MEASUREMENT DEVICE “RENISHAW” T27 Measurement of the length of the turning tool. Routine detection by M-code. Automatic tool breakage monitoring. TOOL MAGAZINE EXTENSION Increase in the number of tools from 30 to 60 stations COOLANT THROUGH THE SPINDLE 100 bar, 25 L/min, 400 L tank ADAPTATION AND PREPARATION OF HP THROUGH THE MILLING SPINDLE Mechanical and electrical integration of the turning clutch. PART UNLOADING CONVEYOR Output to the left of the machine PAPER BAND FILTER SYSTEM CLAMPING SYSTEM FOR F-48 CLAMPS ADAPTATION FOR W-20 CLAMPS PREPARATION FOR INTEGRATION OF A BAR FEEDER Subject to errors and omissions, the technical specifications are provided without commitment.

Condition: used, Year of construction: 2017, Technical details: turning diameter: 340 mm turning length: 1000 mm control: OSP 300 LA swing diameter over cross slide guide: 470 mm swing diameter max. over bed cover: 580 mm travel -x axis: 260 mm travel -z axis: 1065 mm Klsdpjzb Rh Hefx Anyeu rapid travel - longitudinal/face: 30 / 25 m/min bar material dia.: 52 mm spindle diameter: 80 mm Spindle RPM: 5000 1/min spindle drive: 22 / 15 kW turret stations / rotary tool stations: 12/12 VDI 40 : 7 kW speed of driven tools: 6000 1/min Tailstock Travel: 1015 mm tailstock quill taper MT: 5 total power requirement: 38,7 kVA weight of the machine ca.: 6500 kg dimensions of the machine ca.: 4 x 2,5 x 2 m Accerories Chip conveyor Signal lamp 2 colors manual tool eye High precision Turning and Milling Centre with turret for milling tools and main spindle with C- axis. The Stiefelmayer mandrel for inside clamping of hollow shafts can b e replaced by regular 250 mm Kitagawa chuck. Machine can be shown undeer power *

Condition: excellent (used), Year of construction: 2024, MAZAK INTEGREX i-100H Max. machining diameter: 600 mm Max. machining length: 590 mm Max. milling speed: 12,000 rpm Max. spindle speed: 6,000 rpm Machine is equipped with: - CNC control Mazatrol SmoothAi - Tool magazine for 74 tools Kodjy Hwn Espfx Anyolu - KITAGAWA 3-jaw chuck B-206, diameter 169 mm - Tool Eye - C-axis input accuracy 0.0001° - Y-axis - B-axis 0.0001° - 5-axis machining package for SmoothAi - Reinforced coolant pump 15 bar - Chip conveyor, side discharge

Condition: used, Year of construction: 2011, gearing type: automatic, color: other, Year of manufacture: Apr 2011 Kljdey Ennaopfx Anysu Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm

Condition: used, Year of construction: 2008, operating hours: 24,869 h, gearing type: automatic, color: other, Year of manufacture: Apr 2008 Ksdpfx Ansy N D Rleyjlu Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm

Condition: used, Year of construction: 2010, gearing type: automatic, color: other, Year of manufacture: Apr 2010 Axle 1: left 8 mm righ8 mm Ksdpfx Anjy Enkbsyolu Axle 2: left 8 8 mm right 8 8 mm Axle 3: left mm right mm

Condition: used, Year of construction: 2011, operating hours: 24,159 h, gearing type: automatic, color: other, Year of manufacture: Apr 2011 Axle 1: left 12 mm right 12 mm Kjdpfoy Uw Alex Anyjlu Axle 2: left 18-18 mm right 18-18 mm Axle 3: left mm right mm

Condition: used, machine/vehicle number: XLWRT2839C2301615, Year of construction: 2012, operating hours: 20,000 h, gearing type: automatic, color: other, Year of manufacture: Apr 2012 Axle 1: left 8mm right 8mm Ksdpfxjwd Na Us Anyjlu Axle 2: left 6 6 mm right 6 6 mm Axle 3: left mm right mm