Used Two Shafts for sale (12,642)

Condition: used, Year of construction: 2025, operating hours: 650 h, functionality: fully functional, overall weight: 27,000 kg, total length: 10,030 mm, total height: 3,675 mm, total width: 2,540 mm, rotor length: 3,000 mm, power: 405 kW (550.65 HP), ejection height: 4,030 mm, For sale is a PRONAR MRW 1.300 single-shaft pre-shredder (mobile slow-speed shredder) in very good condition. Similar design to the legendary DW-3060 "Buffalo". Dcsdpfxszrd Tio Ak Asp We are very satisfied with the machine, which is in top condition and has only a few operating hours. The reason for the sale is solely that the input material for the company has changed, and therefore a change to a different (chipping) shredding technology is necessary. The machine is regularly used and can be inspected upon request! Diesel engine Volvo Penta 405kW/550 hp, Stage 5 Rotor with 42 bolted tools; length 3000 mm 3-axle chassis with 27 tons; approved for up to 80 km/h 2 screening baskets Overband magnet Long discharge conveyor; discharge height 4030 mm Central lubrication Radio remote control Hopper volume 6.4 m³ / hopper dimensions 3650x2200 / hopper discharge height 2870 mm Direct sale by Hannes Schirnhofer - Schirnhofer wood chip production - Flattendorf, Styria

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. Dodpfx Ajvlpctek Aecp DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: used, Year of construction: 2000, functionality: fully functional, Gas-heated forging chamber furnace from IOB Weinheim, available from company stock. The system features a recuperator, two burners, and an electrically powered lift-up door. Equipment: • PMA KS92 temperature controller Dcedps Aia Umofx Ak Aep • JUMO LOGOPRINT 500 temperature recorder • Siemens SIMATIC S5-95U control system The existing drawing dated May 18, 2000, has the number 5440-20/0. Drawings, electronic documentation, and photos of the furnace, interior, and control system are available. A warm demonstration can be arranged upon request. Condition and inspection: The machine is functional and can be demonstrated under power by arrangement. To the seller’s knowledge, no defects are known. Availability and pickup: Available immediately. The buyer is responsible for disassembly, loading, and transport. The exact scope of delivery and the pickup date will be agreed upon.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 3,050 mm, total height: 4,000 mm, overall weight: 32,450 kg, warranty duration: 12 months, hopper volume: 4,000 l, rotor diameter: 750 mm, rotational speed (max.): 12 rpm, blade width: 75 mm, power: 150 kW (203.94 HP), rotor width: 1,800 mm, type of input current: three-phase, Genox X1800 Twin Shaft Shredder, suitable for shredding various types of materials including tyres, metals, plastics, wood, packaging materials, household & construction waste etc. Dcedpfoz Hyupox Ak Ajp Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with twin 75kW (150kW Total Power) drive motors and oversized, heavy duty reduction gearboxes as standard. Providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs. Segmented blades with replaceable tips are available as an option.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 5,150 mm, total width: 2,210 mm, total height: 2,600 mm, overall weight: 11,400 kg, warranty duration: 12 months, hopper volume: 2,000 l, rotor diameter: 515 mm, rotational speed (max.): 15 rpm, blade width: 50 mm, power: 90 kW (122.37 HP), rotor width: 1,600 mm, type of input current: three-phase, Genox X1600 Twin Shaft Shredder, suitable for shredding various types of materials including tyres, metals, plastics, wood, packaging materials, household & construction waste etc. Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. Dcjdpfx Akjz Hyuis Aep The machine is equipped with twin 45kW (90kW Total Power) drive motors and oversized, heavy duty reduction gearboxes as standard. Providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs. Segmented blades with replaceable tips are available as an option.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 5,873 h, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 10,500 mm, total height: 3,400 mm, total width: 2,800 mm, rotor length: 3,000 mm, rotor width: 3,000 mm, rotational speed (max.): 31 rpm, year of last overhaul: 2026, Doppstadt DW 3060K Buffel Type F Bio Power - Year of manufacture: 2017 - Operating hours: 5,873 - Engine: MTU 6R 1300 (490 hp) - Weight: 30,000 kg - Number of teeth: 42 - Radio remote control Dcjdpfo Aarp Esx Ak Ajp - Cable control - Central lubrication system - 7m rear discharge conveyor - Magnetic separator (over-belt) - BioPower system – increased power and efficiency - Tracked chassis - Working shaft: 3000x600 mm Machine has been refurbished and is available immediately. (Komptech Terminator, Tana Shark, Eggersmann, Hammel, Arjes, Lindner, UNTHA)

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total width: 1,225 mm, total height: 1,850 mm, overall weight: 1,470 kg, warranty duration: 12 months, hopper volume: 550 l, rotor diameter: 276 mm, rotational speed (max.): 13 rpm, blade width: 20 mm, power: 7.5 kW (10.20 HP), rotor width: 400 mm, Genox M400 Twin Shaft Shredder, suitable for shredding various types of materials including plastics, wood, packaging materials, metals (copper, hard drives etc), Dsdpfez Hytrsx Ak Aecp Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with a 7.5kW drive motor and oversized, heavy duty reduction gearbox providing high torque, low speed operation. Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,710 mm, total width: 1,270 mm, total height: 1,850 mm, overall weight: 2,300 kg, warranty duration: 12 months, hopper volume: 750 l, rotor diameter: 276 mm, rotational speed (max.): 14 rpm, blade width: 20 mm, power: 15 kW (20.39 HP), rotor width: 800 mm, Genox M800 Twin Shaft Shredder, suitable for shredding various types of materials including plastics, wood, packaging materials, metals (copper, hard drives etc), Robust, heavy duty construction with easily replaceable wear parts ensures reliable operation, long service life and low maintenance operation. The machine is equipped with twin 7.5kW (15kW Total Power) drive motors and oversized, heavy duty reduction gearboxes providing high torque, low speed operation. The shafts can be started and operated independently which reduces on site power requirements and improves performance. Dcedpoz Hyucsfx Ak Aep Blade width and hook configuration can be specified to suit the specific application and output size requirements. The shredding blades and spacers are manufactured from heat treated, high quality, precision ground specialist steels to ensure long life, shred quality and minimal operational costs.

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 800 mm, filling opening length: 1,000 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Used Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm Infeed opening 1000 x 800 mm LW V-rotor system Hydraulic material pusher Manual and automatic operation Perforated screen with a hole diameter of approx. 15 mm Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Dedpfx Aeznnf Usk Aocp Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, Shredder Shafts for Metal and Car Bodies fitted in Hammel 950, Arjes 950, Lindner U95, Olnova95 all types availlable WERT GmbH exclusively manufactures various types of shredder shafts for shredding metal, wood, waste wood, roots, mixed construction waste, tires, construction rubble, concrete, and scrap tires. "MADE IN GERMANY" We manufacture exclusively in Germany using the finest materials. We impress with our high level of workmanship and quality. Dcedpfx Akefg Adls Asp Delivery time by arrangement WERT GmbH is a metal construction company that specializes in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex and Keestrac. With more than 50 different configurations, an in-house design department and a highly qualified team, we offer tailor-made, innovative solutions that meet the highest quality standards. Our goal is to continually meet our customers' individual requirements through technological excellence and improvement. We serve companies from various sectors, including waste management, recycling and mechanical engineering, and place great value on long-term partnerships. With our reliable and powerful shredding solutions, we support our customers in increasing their efficiency and competitiveness.

Condition: used, Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, overall weight: 20,500 kg, number of blades: 50, control cabinet length: 3,000 mm, control cabinet height: 2,300 mm, power: 200 kW (271.92 HP), rotational speed (max.): 264 rpm, # Lindner Power Komet 1800 – 200 kW – Year of Manufacture 2012 – Secondary Shredder For sale is a regularly maintained and well-kept Lindner Power Komet 1800, year of manufacture 2012, from our existing commercial waste processing plant. The machine was used as an industrial single-shaft secondary shredder for the processing of pre-treated commercial and construction mixed waste and was permanently integrated into our stationary processing line. Dcodpfx As Ahnqysk Ajp ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Power Komet 1800 - Year of Manufacture: 2012 - Machine Number: 1953 - Operating Hours: approx. 38,000 h - Machine Weight: approx. 20,500 kg - Main Drive: 200 kW - Hydraulic Drive: 11 kW - Operating Voltage: 400 V / 50 Hz - Rotor Speed: 264 rpm at 50 Hz - Number of Blades: 50 pieces - Blade Dimensions: 172 × 57 × 28 mm - Screen Hole: Ø 30 mm - Frequency Inverter: ABB ACS-800 - Hydraulic Unit: Bosch Rexroth - Design Throughput: approx. 5 t/h (material-dependent) ### Equipment and Application Area The Power Komet 1800 features a frequency-controlled 200 kW main drive and a hydraulic feed unit for uniform material feeding. The machine was used for the secondary shredding of already pre-sorted and pre-shredded commercial and construction mixed waste. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its operating life. A separate maintenance contract with the manufacturer Lindner Recyclingtech exists for the Lindner Power Komet 1800. In addition to the regular maintenance work, necessary repairs and wear parts were continuously replaced. Important maintenance measures: - Drive bearings completely renewed. - Drive belts completely renewed. - Rotor completely re-armored. The complete rotor re-armoring is carried out regularly to repair areas subject to wear. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets The associated control cabinets are located in a separate switchgear room and are therefore protected from dust and dirt from the production environment. ### Sale Due to Plant Modernization The sale is due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on site during the dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your contact.

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, overall weight: 9,500 kg, rotor diameter: 446 mm, number of blades: 36, total length: 2,990 mm, total height: 2,100 mm, total width: 2,250 mm, rotor length: 1,560 mm, power: 132 kW (179.47 HP), rotational speed (max.): 1,485 rpm, Redoma RC 130 – Single-shaft pre-shredder, rotor 1560mm, used and in working condition For sale is a Redoma RC 130 single-shaft pre-shredder in used, but functional condition. The machine is suitable for pre-shredding various materials in industrial and commercial applications. Dcsdoz N Ev Sjpfx Ak Asp Scope of delivery: Redoma RC 130 single-shaft pre-shredder Associated control cabinet Various spare parts The machine is sold in used, functional condition. Ideal for companies looking for a used pre-shredding system or wishing to expand their existing machinery. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 900, power: 3 kW (4.08 HP), Description Type: EH 400/1 Serial number: 900 Year of manufacture: 2004 Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes Device description: Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: Dcjdpfxszgblre Ak Aop System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Machines of this type are generally used to shred the following materials: Plastic Rubber Wood Light metal shavings Electronic scrap

Year of construction: 2009, condition: good (used), The device is in working order, was removed from a production line, and is stored in a heated warehouse. Before being removed, it was used for mixing dough. It could potentially be used in other branches of the food industry. Dedj Agf S Nepfx Ak Ajcp Power supply: 400V Capacity: 100 kg/batch

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, overall weight: 10,000 kg, loading space length: 1,300 mm, loading space width: 1,000 mm, total height: 3,400 mm, total length: 3,500 mm, total width: 2,000 mm, power: 90 kW (122.37 HP), input voltage: 380 V, rotary shear 2 shafts - 2 motors 45kw - inversion in case of jam - shredding chamber 1300 x 1000 - thickness of new knives 55 - 4 tons - large loading hopper - possibility of loading very versatile and very powerful, can pre-grind organic matter for methanizers, copper cables, lumps, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, hollow bodies, etc. use to grind up sick calves at the renderer. Dcedpfx Ake Ahrp Ro Aop

Year of construction: 2008, operating hours: 18,500 h, condition: ready for operation (used), functionality: fully functional, Universal granulator MeWa UG 1600, Drive power: 110 kW, Rotor length: 1600 mm, Hydraulic feed system (HNDE), Control cabinet, Includes discharge conveyor, stairs, and railings. Dodpfx Akj Ahtime Aecp Wear parts have been replaced. Available from approximately the end of November 2026.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, rotor diameter: 640 mm, number of blades: 62, total length: 2,000 mm, Vecoplan original rotor for VAZ2000 60x60 mm cutters hardfaced rotor includes cutters Dcsdpfxe Ah Hfrj Ak Asp

Condition: used, Year of construction: 2008, machine/vehicle number: 1462, number of blades: 73, LINDNER MICROMAT 1500 – 75 kW – 2008 – OPERATIONAL MACHINE, TESTING POSSIBLE For sale: a Lindner Micromat 1500 single-shaft shredder from the renowned Austrian company, Lindner Recyclingtech. This machine has a power output of 75 kW and was manufactured in 2008. It is designed for the industrial shredding of plastics. Technical specifications: Manufacturer: Lindner Recyclingtech Model: Micromat 1500 Year of manufacture: 2008 Power: 75 kW Power supply: 400 V / 50 Hz Machine number: 1462 Country of origin: Austria CE marking The machine is currently connected to an operational production line. It is possible to start and test the shredder directly in the hall, under real operating conditions. Dsdpfx Akjz Ayaye Aecp Arrangements can be made in advance for an inspection and a demonstration of the machine's operation in the hall.

Condition: used, Year of construction: 2013, operating hours: 4,867 h, functionality: fully functional, Equipment: Basic model DW 3060-C “Büffel” Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. ABS and lighting according to EC directive 50 mm EC drawbar coupling incl. adapter shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the side) Permissible total weight 25,000 kg Tires 385/65 R22.5 Mercedes-Benz diesel engine OM460LA, 315 kW at 2,000 rpm, meets exhaust emission standard EUROMOT IIIB Additional hydraulic connections 20 l and 70 l/min. (using a variable pump) Hydraulic preparation for comb basket system and drive mechanism Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pieces) and comb (22 pieces) - form C (174 mm, armored) Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control system Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint finish: 2-component paint RAL2011 deep orange Additional equipment: BioPower package - Engine output: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 form C armored (42 pieces) - Comb basket system with fine strip basket - Transmission oil cooler Hydraulic drive mechanism Radio remote control Dedozn Icyjpfx Ak Aocp NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system Funnel attachment plates foldable on both sides Delivery date will be agreed upon.

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ* DPPD III 50E 530/150 multi-blade slitting saw Catalog number 7405 TECHNICAL DATA - max. cutting height 150mm - max. workpiece width 700mm - working width of the saw mandrel 530mm - max. saw blade diameter 450mm (installed 350mm) 350mm - arbor bore diameter 90mm from above: - pawls - 2 toothed draw shafts from below: - 2 smooth draw shafts - saw mandrel - smooth draw shaft - 4 feed speed settings - feed motor approx. 2kW - 30kW motor - machine dimensions L/W/H 2400x1700x1900mm - weight approx. 3000kg – Polish production – Used machine, very good condition Net price: 38900 PLN Net price: 9050 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations) Djdpfxo Agupfe Ak Ajcp * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously introduced to the market. We have no business relations with the manufacturer.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 165 kW (224.34 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 700 mm, saw blade diameter: 300 mm, height adjustment type: hydraulic, saw blade bore: 85 mm, actuation type: electric, overall weight: 4,900 kg, Equipment: documentation/manual, We offer a used, twin-arbor multi-blade saw, MEBOR VC 700 D16, manufactured in 2021. The machine is in fully working condition and ready for operation. Manufacturer: MEBOR Model: VC 700 D16 Machine type: twin-arbor multi-blade saw Year of manufacture: 2021 Power supply: 3/N/PE~400/230 V Dedps Afwuqsfx Ak Aocp Frequency: 50 Hz Power: 165 kW Weight: 4900 kg If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2007, operating hours: 4,500 h, functionality: fully functional, machine/vehicle number: W0925621972D07090, overall weight: 18,000 kg, We are selling our Doppstadt Buffalo DW2060. This machine is one of the most reliable Doppstadt models. It is in used condition but is in good working order and ready for use. It can be demonstrated and tested on-site at our facility. It can be transported on the road on its axle with a suitable towing vehicle. This is an exceptionally powerful machine and is available immediately. Dodpfs Adnz Sex Ak Aecp

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Dsdpfxexx Tfzj Ak Ascp Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Dcjdetyy Sfspfx Ak Aep Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: excellent (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft Dcsdpfx Ae Ad N Rnsk Aop - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE - Weight: 30,000 kg - Remote control - Humidification system - Rear conveyor belt 7m - Over-band magnet - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.