Used Two-Aisled Hall for sale (7,912)

Condition: new, Year of construction: 2021, Industrial Fabric Storage Hall for Sale – Approx. 500 m² For sale: a well-maintained industrial fabric hall with an area of approximately 500 m². The hall is suitable for use as a warehouse, production facility, or for storing timber, machinery, and equipment. - Approximate floor area: 500 m² - Robust steel frame construction - Durable PVC/fabric cladding - Large sliding doors - Separate personnel access door - Good internal headroom Cedpfxoz Im Edj Acpsrh - Easy access for forklifts and other machinery - The hall can be dismantled and reassembled at another location - Currently erected and available for inspection Price: Upon request / negotiable. Dismantling and loading for transportation can also be arranged separately.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 612334X00379, Year of construction: 2020, operating hours: 2,810 h, load capacity: 750 kg, lifting height: 10,610 mm, fuel type: electric, construction height: 4,400 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,250 mm, overall weight: 8,330 kg, Equipment: lighting, Attention: The complete equipment list of the vehicle is included as a photo in the images of the ad! STILL Order Picker MX-X 80 – Used unit with premium features, single sale Vehicle Data: - Model: STILL MX-X 80 (Very Narrow Aisle Truck with Pivoting Reach Fork) - Year of manufacture: 2020 | Operating hours: approx. 2,810 h - Load capacity: 800 kg | Lift height: 8,750 mm | Height: 4,400 mm - Additional lift: 1,800 mm | Fork length: 1,250 mm | Aisle width: 2,200 mm - Pivoting reach fork: 180° swiveling, max. 1,400 kg at 600 mm LSA - Adjustable forks: hydraulic, outer width 400 – 1,650 mm Features (Selection): - Mobile personal protection system with 2 laser scanners, fully factory-integrated - Special design pivoting reach fork carriage with reinforced capacity, reach carriage for wide loads up to 2,600 mm - IZF – Inductive Guidance System with guide wire detection, lane detection, automatic aisle recognition & emergency stop on signal loss - Cabin: Combined design for standing/seated order picking, with LED work lights, warning beacon & polycarbonate windshield - Ergonomic driver’s seat (fabric-covered, height & tilt adjustable, suspended), foldable - Control panel: multifunctional, steering knob, 5 programmable favorite keys, contactless two-hand sensor, MMS terminal preparation - Safety: automatic braking, stop & absolute stop at aisle ends, rescue lowering system, RFID-controlled height limit (2 definable heights) - OPTISPEED 3.0: dynamic load display depending on fork height, automatic reach reduction - Additional equipment: Panoramic rear-view mirrors on both sides, DIN A4 writing pad, modular accessory system on cabin railing Battery & Charger: - 80V traction battery (930 Ah), low maintenance, with central water filling system (STILL) - External charger D 80/100 PXS, charging time approx. 9–11 h, 400 V / 32A CEE, LED charge status display Special features: - Extended chassis – ideal for special pallets/corlettes – no disadvantage in racking applications - Machine is currently set up and ready for demonstration - Single unit – not available as a series sale, we bought the truck ourselves 1 year ago but did not set up a warehouse Cedpfx Acsw U El Tjpjrh Condition & Removal: - Very well maintained, fully functional, no known defects - Removal only possible by crane (hall height 10 m) – disassembly required and to be organized by the buyer or by arrangement

Condition: used, System Hall Moulder Infeed Table (2005) with Hydraulic Drive Used moulder infeed table for sale, manufactured by System Hall AB, Sweden. It consists of a chain cross transfer conveyor and an infeed section with pneumatic hold-downs, and it feeds timber into the moulder automatically and evenly. The hydraulic motors have had their seal kits replaced. Crodpfx Ajz H I R Eecpsh Specifications: Manufacturer: System Hall AB, Falkenberg, Sweden Year: 2005 (CE) Overall length: 7.5 m Height: 1.85 m Infeed section length: 2.25 m Infeed section width: 0.9 m Drive: hydraulic (separate hydraulic power unit with electric motor), SEW gear motors Pneumatic cylinders for clamping and positioning Chain cross transfer with roller chains Included: hydraulic power unit, 4 toothed pulleys.

Condition: used, Year of construction: 2018, functionality: fully functional, load capacity per storage section: 1,000 kg, total length: 37,030 mm, total height: 4,310 mm, total width: 4,590 mm, shelf height: 4,310 mm, We are offering a used, fully functional flow rack system with a two-level construction (ground floor and upper floor) for sale. This system is perfectly suited for storage and order picking according to the FIFO principle (First In – First Out) and is ideal for logistics, shipping, or manufacturing operations. The racking is optimized for cartons with dimensions of 600 x 400 x 250 mm, accommodating a total of up to 3,000 cartons. Dimensions: The entire system has a total length of approx. 37 m, divided into two sections: one continuous block (approx. 20 m), a staircase section (approx. 1.3 m), and a second block with a walk-through passage (approx. 15.6 m). The total depth is approx. 4.6 m and consists of two racking depths of 1.3 m each, as well as a central service aisle of approx. 2 m. The upright height is approx. 4.3 m; the bottom edge of the intermediate deck (upper floor) is at approx. 2 m, providing sufficient clearance for ergonomic work on the lower level. Configuration and equipment: Each bay is approx. 2.12 m wide (upright width approx. 0.1 m) and contains a total of 10 flow channels – 5 on the lower and 5 on the upper level. Shelf heights are variably adjustable via perforations in the uprights, allowing flexible adaptation to different article sizes. The shelves are equipped with roller conveyors that have a slight incline, ensuring goods and handling units automatically move to the picking side. Crsdpfx Asyxqhvocpsh Access to the upper floor is via an integrated staircase. A central aisle between the rack rows allows loading from the rear and picking from the front. Load capacities (with evenly distributed loads): - Shelf load: 100 kg - Bay load: 1,000 kg - Mezzanine floor: 250 kg/m² Summary of core data: - Total length: 37.03 m - Overall width / depth: 4.59 m - Upright height: 4.31 m - Headroom lower level: approx. 1.98 m - Bay width: 2.12 m - Shelves per bay: 10 (5 lower / 5 upper) - Roller conveyors: yes, inclined (FIFO) - Shelf load: 100 kg - Bay load: 1,000 kg - Mezzanine floor load: 250 kg/m² The system will be dismantled at its current location prior to collection. Inspection possible by appointment. Self-collection required.

Condition: good (used), Year of construction: 2012, Exposé for Hall Rental Production and assembly hall ready for occupancy Fully equipped - 850 m² - Compressor system available - 40.0 t overhead crane (2 x 20 t rotating cranes) - 10.0 t overhead crane - 5.0 t gantry crane - 20.0 t overhead crane - 12.5 t overhead crane - Millutensil MIL303 spotting press Crjdjygkinopfx Acpoh - Crane hook height: 7 m - Truck entrance gate height: 4.5 x 5 meters - Workshop trolley with tools and lifting gear available - Foreman’s office and meeting room with air conditioning - Ladies and gents restroom - Lathe and grinding machine available - Fiber optic connection available (contract with Telekom possible) Available for immediate rent Location: 35232 Dautphetal, Industriestr. 9 Viewings by appointment possible

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Cedpfjvlpctox Acporh Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Mobile shredding plant LINDNER URRACO 4000DS (semitrailer version) Diesel engine: 350 hp Csdpfxjz Hw Nqj Acperh Discharge height of discharge conveyor: > 4.50 m

Condition: good (used), CMC Q Cover Two LPA2 50-70 Hard Cover Maker The machine is in very good condition and ready for production. Made in Italy. Manufacturer’s description: The machine is very easy to set up, operate, and service. It can produce over 250 covers per hour. The machine is equipped with the following components: – a hot glue application module (laminator) with a roller steam extraction bar, Crodpfszw Tzgsx Acpjh – an assembly table with a vacuum system, – a module for folding the veneer edges in a single pass on both sides, – pressing rollers, – a module for positioning the cardboard, Veneer types that can be used: smooth and laminated paper, photo paper, canvas, artificial and genuine leather, etc. Technical specifications: Type: Semi-automatic machine for producing hardcovers Maximum cardboard format: 700 x 500 mm Maximum paper format (cover): 740 x 520 mm. Cardboard weight: 1.5-3.0 mm. Power consumption: 2 kW, Power supply: 380V. Adhesive type: hot or cold External dimensions: 140x210x125cm Weight: 490kg.

Condition: used, functionality: fully functional, machine/vehicle number: FN312489, Year of construction: 2004, operating hours: 2,829 h, lifting height: 4,000 mm, load center: 418 mm, fuel type: electric, power: 4.4 kW (5.98 HP), gearing type: automatic, battery voltage: 48 V, DGUV certified until: 02/2026, overall weight: 5,395 kg, empty load weight: 4,395 kg, total height: 6,550 mm, total width: 1,450 mm, Equipment: cabin, Jungheinrich narrow-aisle forklift from 2004 for sale. Codpfx Ajz Ixcuscpjrh The forklift was only used once a year for inventory purposes. Please refer to the pictures for details.

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available Cjdpfxeum Uzae Acporh - Directly from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large programme of mounting and connection accessories - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Condition: used, Year of construction: 1988, CRANE HALL with ADDITION 492 m² + 288 m² with 2 x 10-ton crane runways *for DIY enthusiasts* DEMAG, year of construction 1988 Crane hall (all dimensions are approximate) Width: 13.50 m Length: 36.50 m Eaves height: 8.89 m Ridge height: 9.25 m Roof slope: 3.05° Snow load at previous location: approx. 85 kg/m² Crane runways: 2 pieces Crane runway 1: 10 tons Cantilever at a height of: 8.85 m, the same for both cranes Hook height at 7.00 m, the same for both cranes Serial No. 1: Serial No. 88205500 Type FKKF, year of construction 1988 Drive motor 1 Crane runway 2: 10 tons Serial No. 2: Serial No. 88205510 Type FKKF, year of construction 1988 Drive motor 2 Codpfxoz Hlx He Acpjrh Addition Width: approx. 12.00 m Length: approx. 24.00 m Height: approx. 5.60 - 6.00 m Crane runway support provided for approx. 2.5 - 4 tons Equipment Supports: HEA 400, 14 pieces, 9.80 m, 17,150 kg incl. struts to truss, approx. 1.40 m Truss: IPE 400, 7 pieces, 10.70 m, 4,966 kg Gable wall supports Wall posts: IPE 140, 32 pieces, 6.00 m, 2,478 kg Pressure tubes roof: DN 80, 14 pieces, 6.00 m, 528 kg Gable wall supports Wind bracing in 3rd bay, 10 mm, 10 pieces, 6.23 m, approx. 23 kg Crane runway rails: 2 x 36 m 1 gable frame Supports: IPE 360, 3-4 pieces Pressure tubes: 90 mm, 11 pieces Corner supports: HEA 300, 3 pieces, 5.60 m The supports were cut off, 1 support was tapered, approx. 60 were embedded in concrete. Roofing: none Wall panels: none Windows: none Doors: none Gates: none Power cable crane runway: none Structural calculations / plans: none Lighting: none Crane runway drive, addition: none

Condition: good (used), functionality: fully functional, total width: 20,200 mm, total length: 12,000 mm, total height: 10,750 mm, Professional Industrial Tent Hall Hallbyggarna Jonsereds – 242 m² For sale: a high-quality, lightly used industrial tent hall manufactured by the Swedish company Hallbyggarna Jonsereds, featuring a heavy-duty steel supporting structure and durable PVC fabric cover. The hall was purchased in Sweden, professionally dismantled, and is currently located in Latvia, ready for installation at a new location. Hall dimensions: - Width – 20.2 m - Length – 12.0 m - Total area – 242.4 m² - Side wall height – approx. 8.0 m - Maximum height – approx. 10.75 m The hall is particularly suitable for: - manufacturing facilities - warehouses and storage - machinery storage - raw material storage - bulk material storage Crodpfxez Iudns Acpsh - woodworking - agricultural and industrial purposes - other industrial applications Additional technical information and drawings are available upon request. The hall can be viewed in its dismantled condition in Straupe Parish, Cēsis Municipality, Latvia. This type of structure is significantly more robust and designed for professional industrial use. It should not be compared with lightweight PVC storage tents or basic temporary shelters. Price: EUR 30,000 (VAT is not included)

Condition: used, functionality: fully functional, machine/vehicle number: VR 1,25M, Year of construction: 1998, operating hours: 12,000 h, lifting height: 7,000 mm, empty load weight: 1,075 kg, total height: 7,000 mm, Equipment: full service history, pallet forks, sideshift, BT VR 1.25 M reach truck, 48V Year of manufacture: 1998 Codpjzl R Erofx Acporh Operating hours: 12,000 hours New battery, May 2026; TAB 560Ah - battery warranty of 24 months Lifting height: 7 meters, 1,075 kg Regularly serviced Selling price: €5,000.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION1750-840PM Baujahr: 2008 Schließkraft: 175 Tonnen Holmabstand 510 x 510 mm Einbauhöhe min. /max.: 500 - 800 mm Öffnungsweg: 450 mm Codoz I Dd Depfx Acpjrh Schnecken DN: 55 mm Max. Hubvolumen: 457,6 cm³ Spritzteilgewicht in PS: 455,8 g Ausstattung: 2 x Kernzug

Condition: used, Year of construction: 2012, operating hours: 2,815 h, functionality: fully functional, machine/vehicle number: 12SLT146060, overall weight: 21,000 kg, Equipment: steel tracks, Tracked diesel 2 shaft shredder in perfect working condition. Dimensions: Weight: 20 Tonne (22UST) Transport Width: 2.5m (8'3") Transport Length: 10.2m (33'6") Transport Height: 3.1m (10'5") Working Width: 2.5m (8'3") Working Length: 10.2m (33'6") Working Height: 4.2m (13'10") Applications All types of wood (railway sleepers, pallets) All plastics (including wind turbine blades) Cedeya Hmiepfx Acporh Commercial and industrial waste Construction & Demolition (C&D) Domestic and household waste Green waste (including grass, trees, stumps) Mattresses Paper and cardboard (including paper rolls) White household goods

Condition: excellent (used), Year of construction: 2019, 1.0 unit, two-component dispensing system with material feed and mixer. Manufacturer: KOCH - Technik Type: GK-65 / 612D / GK65 / Crodpfx Acez Hn Ecjpsh Year of manufacture: 2019

Condition: good (used), functionality: fully functional, Net price: 1,100.00 EUR Crodpfx Acez E N Dwopjh Gross price: 1,309.00 EUR You will receive a proper invoice. Internal article number: 26093 Pneumatic press Schmidt Pressing force: 32 kN Stroke: 100 mm Connection: 220 V Ram holder: D20 mm Table: 300 x 220 mm Hole in table: D50 mm Dimensions (L x W x H): 35 x 60 x 130 cm Weight: approx. 100 kg Fully functional. The pneumatic hoses should be replaced as they are partially porous. You are welcome to inspect the press while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, type of input current: three-phase, empty load weight: 3,500 kg, working width: 1,400 mm, filling opening length: 1,400 mm, filling opening width: 700 mm, Untha 40 shredder This slow-speed shredder is ideal for shredding large items such as pallets, consumer electronics, televisions, solar panels, and bumpers. Power: 2 x 18.5 kW Electrical cabinet: Siemens Chamber dimensions: 1400 x 700 mm Loading hopper included. Weight: approx. 3500 kg The machine is in perfect working order. Price available upon request. More photos and a video of the machine in operation can be provided upon request. Testing is possible. Csdezmzgpspfx Acpsrh More information is available by phone.

Year of construction: 1977, condition: good (used), machine/vehicle number: 12200, Cylinder diameter: 400 mm Cjdpfx Acjy Ui Uyjpjrh Cylinder length: 1000 mm Max. pressure between cylinders: 2 x 450 kN

Condition: excellent (used), Complete planing line from intake to stacker with a Waco 3000 planer and surrounding equipment from System Hall Cjdpfx Acjm Uyknjperh

Condition: used, functionality: fully functional, operating hours: 1,616 h, total length: 584 mm, total height: 355 mm, total width: 330 mm, type of input current: AC, overall weight: 16 kg, Sales Description For sale is a Markforged Mark Two 3D printer, one of the leading professional fiber composite 3D printers for manufacturing high-strength functional parts. The printer is in good condition and has only 1,616 operating hours. Cedpozdnyqefx Acpjrh Thanks to the ability to reinforce components with carbon fiber, Kevlar® (aramid), fiberglass, or HSHT fiberglass, extremely stable and durable components can be produced. Ideal for professional use in development, prototyping, mechanical engineering, motorsports, or the manufacture of fixtures and tools. The printer processes materials such as Onyx, Nylon White, PLA, and TPU, and offers a build volume of 320 × 132 × 154 mm. The scope of delivery includes numerous accessories and consumables:  Kevlar fiber  Fiber spools  Carbon fiber (already installed)  Dry box  Black PLA spools  New blue PLA spool  Print plate  Fiber load tubes  Fiber Bowden tube  Replacement nozzles  Torque driver  L-key set and other accessories Technical Highlights  Printing process: Fused Filament Fabrication (FFF) with continuous fiber reinforcement  Build volume: 320 × 132 × 154 mm  Materials: Onyx, Nylon White, Precise PLA, TPU 95A  Fiber reinforcement: Carbon fiber, Kevlar® (aramid), fiberglass, HSHT fiberglass  Tensile strength: up to 800 MPa (comparable to aluminum components)  Elastic modulus: up to 60 GPa  Precision print bed: flatness up to 160 μm  2nd generation extruder with material monitoring and out-of-plastic detection  WLAN connectivity (802.11 b/g/n)  Industrial quality for functional prototypes and durable end-use parts The printer is ready for immediate use and is suitable for both companies and ambitious users who want to manufacture high-quality, durable components.

Condition: excellent (used), Colotronik two-component mixing unit for plastic granules. The mixing unit can be used in conjunction with commercially available conveyor systems. It receives a start signal from the conveyor system and then mixes the two granule components independently. The unit was hardly used, or possibly not used at all. If it was used, only polypropylene (PP) was processed. Glass fiber reinforced materials were not used. Credsz H Sbnepfx Acpoh

Condition: like new (used), Year of construction: 2005, operating hours: 20,000 h, warranty duration: 24 months, rotor diameter: 500 mm, rotational speed (max.): 165 rpm, year of last overhaul: 2024, MAQUINA COMPLETAMENTE RECONSTRUIDA // MACHINE FULLY REFURBISHED Longitud de entrada // Intake length: 1250 mm Anchura de entrada // Intake width: 2962 mm Longitud de rotor // Rotor length: 2962 mm diam. rotor // rotor diam.: 500 mm nº de rotores // nº of rotors: 2 off n.º de cuchillas // n. of knives: 2x27 (80x80) velocidad del rotor 1 // rotor 1 speed: 95 rpm velocidad del rotor 2 // rotor 2 speed: 75 rpm potencia motor 1 // main motor 1 power: 75 kW potencia motor 2 // main motor 2 power: 55 kW voltaje // voltage: 400 V frecuencia // frequency: 50 Hz Peso de la máquina // machine weight: 16000 kg * Máquina completamente reconstruida (rotor y contracuchilla completamente recargado); 1 año de garantía ó 2000h, lo que antes suceda * Incluye: - Soporte de máquina - NUEVO - Tolva de alimentación - NUEVO - Cuadro de control eléctrico - NUEVO - Planos de implantación disponibles - Manual de instrucciones & esquemas eléctricos Includes: - Machine fully refurbished (included complete hard facing of rotor); 1 year guarantee or 2000h, whatever happens first - Machine specially designed for shredding of plastic waste. - Electric control pannel - NEW - Steel support for the machine - NEW - Infeed funnel for the machine - NEW - Dimmensional drawings available in Acad for the machine Crsdpfjg D Ullex Acpeh - Operation & maintennance mannuals available

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 5,450 mm, total width: 2,700 mm, total height: 2,300 mm, overall weight: 22,500 kg, rotor diameter: 640 mm, rotational speed (max.): 165 rpm, rotor width: 2,000 mm, input voltage: 400 V, year of last overhaul: 2026, Vecoplan VNZ 200 - Two-shaft shredder 2 rotors, each with a length of 2,000 mm Rotor diameter: 640 mm each 48 cutting tips, 80x80 mm, X-Cut per rotor 2 drive motors, each with 132 kW Rotor speed: approx. 165 rpm Control cabinet as a freestanding cabinet Weight: approx. 22.5 t The machine is equipped with a pneumatically pre-tensioned counter-knife crossbar, which can be lowered for maintenance work and to remove foreign objects. In addition, this protects the machine from major damage when foreign objects enter. The large, hydraulically pivoting and locking maintenance doors on both sides further simplify maintenance work and the removal of foreign objects. Possible areas of application: Re-shredding of pre-broken waste or residual wood, as well as pre-shredded household, commercial, or industrial waste, packaging materials, production residues, and much more. Depending on the size, the materials can also be fed into the machine without prior pre-shredding. The machine has been completely overhauled. The following overhauls were carried out: - Rotor bearings renewed Cedpszdf Ruefx Acperh - Wear surfaces refurbished - Rotor tool holders re-armored - new hydraulic hoses and new motor for hydraulic unit - Pneumatic piping and valves renewed - Rotors fitted with new cutting tips, and new counter-knives installed - new drive belts - Screens will be newly manufactured according to the required grain size - Complete new paint job - Control cabinet overhauled and new star-delta starter circuit installed Additional spare parts package includes: - two overhauled gearboxes - overhauled drive motor - new turbo coupling

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 6,565 h, load capacity: 1,000 kg, load center: 600 mm, fuel type: electric, power: 6.9 kW (9.38 HP), battery capacity: 750 Ah, battery voltage: 48 V, battery weight: 960 kg, fork length: 1,000 mm, tire condition: 99 %, overall weight: 4,897 kg, Equipment: head guard, pallet forks, We offer this used Jungheinrich EKX 410 narrow aisle forklift, manufactured in 2015. Type: EKX 410 Serial number: FN487296 Rated capacity: 1000 kg Battery voltage: 48 V Forklift weight without battery: 4897 kg Option: G+I 120 650 DZ Crsdez An Npopfx Acpeh Year of manufacture: 2015 Center of gravity distance: 600 mm Rated power: 6.9 kW Battery weight min/max: 960 / 1062 kg If you have any further questions or require more information, please do not hesitate to send us a message or call us.