Used U 1200 for sale (43,871)

Condition: good (used), The scope of delivery includes: 1x shelf connector, used Gsdpfxsi Enyus Am Eebw Shelf system: Nedcon Type: NS suitable for frame profile width: 100 mm for shelf spacing: 300 mm Profile dimensions: U 65 x 40 mm Weight: 0.83 kg | per piece

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Gbjdpfx As E Dquem Eow Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: new, weight max. in kg 1200 kg fork length 1150 mm stroke height min 85, max 190 mm 160 mm length in width 550 mm number of wheels 4 vorne, 2hinten tire equipment 80 x 70mm PU tandem fork arm (length x width x thickness) 1150 x 160 x 45 mm turning radius 1452 mm battery 48V / 20Ah weight of the machine ca. 0,140 t dimensions 1,65 x 0,55 x 1,2 m SPECIAL PRICE!!! - Battery charging time only 3 hours Gbedpjfgyhnofx Am Esw - Electrically lift and move - Use up to 6 hours - Easy to maneuver due to its low weight - Powerful lithium battery Driving speed - 4.5 km/h without load - with load 4.0 km/h

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate Godpfx Amjfgyige Esbw constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, functionality: fully functional, Welding tractor, ABICAR 1200 PRO 42V, new unit from stock, original packaging Mobile unit for welding longitudinal seams with maximum efficiency. Production of continuous butt and fillet welds – by using these welding systems, longitudinal seams can be produced faster and costs for rework can be significantly reduced. In combination with accessories, the following applications are possible: • Welding with oscillation, • Use of welding torch with larger diameter, • Operation of the unit on outer edges, overlap joints, plates, pipes, tanks, etc. Operation: in combination with welding power source iMIG POWER 400 (available in stock) Gsdpfx As Afd Nbsm Ejbw * Torch type: MIG/MAG * Torch diameter: 16 – 22 mm * Voltage: 1 … 42 V, 50/60Hz * Power: 25 W * Workpiece thickness min: 5 mm, ground clearance 5 mm * Speed horizontal / vertical: 0 – 120 cm / min, 0 – 110 cm / min * Curvature radius min: 1,500 mm * Dimensions (L x W x H): 401 x 372 x 236 mm * Weight: 14 kg (welding tractor) * Manufacturer: ABICOR BINZEL, Germany * Several units available Delivery/shipping possible against cost coverage. Image of the product is similar.

Condition: new, table length 1200 mm table width 800 mm table height 980 mm weight of the machine ca. 0.95 t Workstation - Hole diameter: 28 mm Godpfjyv I Inex Am Esbw - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm

Condition: used, This listing is for a Olympus U-DO3 Dual Observation Attachment. The unit is in full working condition and is ready for immediate release. Gbodpfx Aexxy Ivsm Eow The Olympus U-DO3 Dual Observation Attachment is a microscopy accessory designed for Olympus BX series microscopes. It allows for simultaneous observation by two users, making it an ideal tool for collaborative research, education, and training. Key Features Dual observation capability with a movable LED arrow pointer, controllable by both viewers Selectable colour (red or green) of the arrow pointer Compatible with Olympus BX series microscopes Allows for real-time observation and discussion between two users

Condition: used, This listing is for a QuattroFLow QF15SU-U Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow QF15SU-U is a specialized 4-piston diaphragm pump designed for single-use in biopharmaceutical applications. Its features and applications make it particularly advantageous for handling delicate fluids. Here’s a closer look: Key Features: Gedpfx Amoxxz Ido Eebw Single-Use Pump Chamber: Constructed from plastic, this design significantly reduces contamination risks and the need for cleaning between uses. 4-Piston Diaphragm Design: Ensures smooth and consistent flow, critical for sensitive applications. Self-Priming Capability: Can operate without priming, enhancing operational convenience, especially in processes where fluid levels fluctuate. Dry Running Capability: The pump can run dry without damage, providing flexibility in various operating conditions. No Rotating Parts: This design feature prevents heat generation and eliminates the risk of particle shedding, ensuring that the product remains uncontaminated and stable. Gentle Fluid Transfer: Designed to facilitate the safe and secure transfer of fluids, ideal for sensitive biological products. Applications: Biopharmaceutical Applications: Perfect for pumping aqueous solutions and biological products, especially those sensitive to shear forces, like proteins and enzymes. Research and Production Facilities: Suitable for use in laboratory or pilot plant environments, where precision and reliability are paramount. Re circulation of Feed/Retentate: Effective for processes involving membrane cassettes, hollow fibre, spiral wound, or ceramic filtration elements. Feed Pump for Filters: Works well as a feed pump for filter cartridges or plate and frame depth filters, ensuring optimal flow rates and minimal shear. Summary:

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Gbjdsyy A Iqjpfx Am Eow Durofer pointed tooth rollers (Weinig patent) wi...

Condition: excellent (used), COLLATING MACHINE DUPLO COLLATOR DC-1200 & DC-12ST Gsdpfx Amsyy Ixno Eebw Consisting of: Duplo Collator DC-1200 // Ser.No.: 60718856 // Stations: 12 DC-12ST // Ser.No.: 61029010

Condition: used, Year of construction: 2000, Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data - Capacity: up to approx. 15,000 bph Godpfoy Azu Usx Am Ejbw - Formats: 0.5 L – 1.0 L (15 formats) - Application: Self-adhesive labelling of bottles - Configuration: 3 labelling stations (front / back / neck/seal) - Label positions: Front, back, neck/seal - Incl. Inspection system | KRONES | Checkmat

Condition: like new (used), Length: 2350 mm Width: 1400 mm Load capacity: 800 kg Aisi 304 steel Certification valid for over 2 years Please see my other listings as well Gbedpfjy Il Ngsx Am Eew

Condition: used, mileage: 707,318 km, power: 250 kW (339.91 HP), first registration: 08/1999, fuel type: diesel, number of seats: 46, gearing type: automatic, emission class: euro2, color: yellow, brakes: retarder, total length: 11,250 mm, total width: 2,500 mm, total height: 3,260 mm, Equipment: ABS, cruise control, fog lights, power assisted steering, traction control, trailer coupling, = Additional options and accessories = - Adjusted for handicapped Gbjdjy Hw Hbopfx Am Ejw - Autoradio - Double glazing - Electrically operated mirrors - Heater - Hydraulic power steering - Individual air cooling - Individual lighting - Portable radio set - Sun visor - Tachograph = More information = Transmission: 5 gears, Automatic Engine capacity: 10.964 cc Make of engine: Mercedes Benz Tyre tread remainder on axle 1: 40% Door count: 2/3

Condition: used, mileage: 354,774 km, power: 235 kW (319.51 HP), first registration: 03/2010, fuel type: diesel, number of seats: 45, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, * Our internal number: 1077 * PICK-UP PRICE / Final price -> as is, where is. * MAN A 20 * Retarder * Automatic transmission * AIR CONDITIONING * SEATS also have 3-point seatbelts facing forward * CUSTOMER SERVICE performed in 06/2025: * e.g., oil change, fuel filter, pre-filter replaced, * oil filter, air dryer cartridge, idler pulleys / tensioner pulleys / * V-belt, FRONT AXLE completely overhauled, SHOCK ABSORBERS new, greased, .... Gsdpfjygp Hfjx Am Eebw * Matrix with control unit GORBA * Screen cabling incl. bracket * Folding ramp * Convector heater * 45 seats * 4 x folding seats at the KIWA parking space * 31 standing places * Raising/lowering * Paint: white * etc. * TAKE-AWAY PRICE * All information without guarantee * We reserve the right to sell the vehicle prior to sale * We expressly refer to our terms and conditions

Condition: excellent (used), Kellenberger 1000U cylindrical grinding machine with many accessories available at a low price. This machine is in very good condition and is fully functional. It was purchased as a completely overhauled unit in 2019. Price greatly reduced!!!!! Gbodpfx Amjwkt Euo Ejw

Condition: new, empty load weight: 290 kg, maximum load weight: 910 kg, overall weight: 1,200 kg, loading space length: 2,510 mm, loading space width: 1,260 mm, loading space height: 830 mm, tire size: 185/70R13, Low loader with cover from the manufacturer ANSSEMS model GTB1200 251x126 VT1. The Anssems cover trailer with brake has aluminum side walls, aluminum cover with gallery, internal locks, adjustable lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar as standard equipment. Gbjdpfoq Su Rcsx Am Ejw We also offer accessories for Anssems car trailers such as tool box, lashing straps, lashing eyes, 100 km/h, and lock.

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system Godpfxswf Rgfo Am Eebw - WITHOUT RINGLER exhaust - WITHOUT tools

Condition: new, KSB Submersible Motor Pump with Water-Filled Motor Manufacturer: KSB No.: 110 321 Type: BRZS 535 /1a Motor Type: 12 A 923 Operating Voltage: 380/660 V Rated Current: 191/111 A 92 kW Speed: 450 1/min Q: 250 m³/h H: 26 m IP: 58 Year of Manufacture: unknown Length: approx. 2750 mm The pumps are unused, in-stock items and are delivered in the original KSB wooden shipping crate (the wooden crates may have slightly different dimensions). Total weight including crate: approx. 1500-1700 kg You can find more pumps – new and used – in our shop! Gsdpfx Aswbqgdom Eobw International shipping costs available upon request!

Condition: good (used), “Bakker Magnetics LD400.1200/1200/7” for Sale Manufacturer: Bakker Magnetics Type: LD400.1200/1200/7 Magnet L x W x H: (1.200 + 1.200=) 2.400 x 1.200 x 400mm. (130mm. Transportmagnet) AA.: Ca. 3.050mm. Belt widthness: 1.400mm. Weight: 4.850 KG. Year of Manufacture: 2019 Gsdow R N Udspfx Am Esbw

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,600 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.) Gbedpfjx D Dx Aex Am Eew

Condition: used, This listing is for Olympus U-RFL-T Fluorescence Power Supply The unit is in full working condition and ready for immediate use This fluorescence power supply is a robust unit designed to provide consistent burner illumination for optical laboratory applications. Manufactured by Olympus, this reliable system is an excellent addition to any modern facility needing to power their fluorescence microscopes. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Gedpjzqf Npefx Am Esbw Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg Godpfx Ajzru Tmom Ejbw

Condition: used, Year of construction: 2016, Used 2016 SPINNER U-1520 Machining Centre Supplied with Siemens SINUMERIK 840 control, 12,000 RPM spindle, 32-station tool changer, 80 bar high-pressure coolant, air through spindle, Renishaw probe, touch probe, and additional Ø650 mm rotary table. ----- SPECIFICATION: TRAVELS: - X Axis: 1,500 mm - Y Axis: 500 mm - Z Axis: 600 mm - 4 Continuous Axes + 1 Positioned Axis TABLE: - Rotary Table Diameter: 650 mm - Fixed table: 920x540mm SPINDLE: - Max Speed: 12,000 rpm - Taper: SK40 - Air Through Spindle Gbsdpezx Ehnofx Am Ejw TOOL CHANGER: - Capacity: 32 Tools COOLANT EQUIPMENT: - High Pressure Coolant: 80 bar GENERAL: - Control: Siemens SINUMERIK - Renishaw Probe - Touch Probe - Year of Construction: 2016 Control: Siemens 840D Spec: Travel X 1500 Y500 Z600 | Spindle Speed 12000RPM | SK40 Accessories: 5 axis Table, Fixed Table, 32 Tool Changer

Condition: used, mileage: 154,360 km, power: 103 kW (140.04 HP), first registration: 09/1998, fuel type: diesel, empty load weight: 3,920 kg, maximum load weight: 3,580 kg, overall weight: 7,500 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 2,830 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, loading space length: 1,950 mm, loading space width: 1,900 mm, loading space height: 400 mm, Equipment: additional headlights, all wheel drive, cabin, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, short cab, high roof, air-suspension seat, rear window, 8-speed gearbox, ABS (anti-lock braking system), constant throttle, auxiliary drive, raised exhaust, differential lock, long-range headlights, rotating beacon, trailer hitch ball, towing device, low-noise G1, winter service equipment, swing-out tailgates, roof hatch. Wheelbase: 2830 mm, Body: 3-sided tilting body, axle ratio: slow, trailer brake system, two-line, mounting brackets front, mounting brackets rear, higher cab roof, fine dust and pollen filter, sound and heat insulation for cab, auxiliary transmission with intermediate and super-crawl gear, dual clutch, shift plate, hydraulic system with 4 circuits, tilting cylinder, hydraulic connection at the rear 6-way, hydraulic connection at the rear 4-way, cell 3+4, separate return line at the rear, hydraulic connection at the front 4-way, cell 1+2, hydraulic connection at the front 4-way, cell 3+4, separate return line at the front, engine brake, engine PTO switchable, PTO front 1 3/8 keyway, PTO rear split 1 3/8 keyway. Loading height approx. 1420mm! Gbedpszx Tlzjfx Am Ejw Approx. €3,000.00 invested (paint, refurbishment and technology). Matching snowplow -9996- available for an additional charge of €1,500.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, BT   Model PPS 1200 MX / 1   The BT PPS 1200 MX / 1 is an electrically powered high-lift pallet truck from the manufacturer BT, designed for internal material handling. This model is characterized by its compact design and high maneuverability, making it particularly suitable for use in narrow storage areas, shops, and small production facilities.   Key technical features   Load capacity: 1,200 kg   Lifting height: approx. 2,700 mm   Fork length: approx. 1,150 mm   Drive: 24V electric drive   Battery: 24V   Model from 1999   Operating hours: approx. 356 hours   The pallet truck is still in use, so the actual operating hours may vary slightly at the time of purchase.   Battery renewed in October 2022.   Condition: used   Scope of delivery: (See image) Gjdeziivdspfx Am Eebw   (Changes and errors in the technical data and information are subject to change!)   We will be happy to answer any further questions you may have over the phone.