Used Universal Vertical Milling Machine for sale (67,512)

Condition: good (used), Year of construction: 1982, travel distance X-axis: 900 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 45 rpm, quill stroke: 80 mm, quill diameter: 100 mm, total height: 2,000 mm, total width: 1,900 mm, total length: 2,000 mm, table width: 350 mm, table length: 1,250 mm, table load: 400 kg, overall weight: 2,100 kg, Universal Milling Machine, gear type, swiveling and tilting head, feed range X/Y/Z 900/270/450 mm, table size 1250x350 mm, motor 7,5 KW, 12 speeds 45-2000 rpm., ISO 40, quill travel 80 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling device, coolant system, dimensions 1900x2000x2000 mm, weight ca. 2100 kg; accessoires into cabinet Ledpfx Aeyly Drsglerr

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Lrsdpfx Agjr U St Uslsr Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale - Can be tilted +/- 15 degrees from/towards the machine - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Lodpod E A I Nsfx Agljrr Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, Universal Tool Milling Machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 contouring control . 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently used only occasionally in the workshop of an electronics company. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z-axis: 10–500 mm/min, stepless Feed Y-axis: 5–250 mm/min, stepless Rapid traverse X, Z-axis: 1.4 m/min Rapid traverse Y-axis: 0.7 m/min Quill vertical travel: 100 mm Quill feed, vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill horizontal travel: 100 mm Spindle drive: 5.5 kW Ledpfx Aov Amryjgljrr Power supply: 380 Volt, 50 Hz, 10 kW - NC contouring control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed 0.02–0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tilts and swivels 30°, 225 mm cross adjustment - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rev = 3° - Swiveling control panel - Central lubrication - Operating manual - Machine mounted on steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Space requirements L x W x H 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (actual) Very good condition

Condition: used, Univ. universal milling machine DECKEL, Type FP 1 Machine No. 28317, Year of manufacture approx. 1960 Travel distances: X: 245 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 210 mm Spindle mount, horizontal: MK 4 - S20 x 2 Spindle speed, vertical: 95-1900 rpm, 12 steps Spindle speed, horizontal: 60-1200 rpm, 12 steps Motor power: 0.8 and 1.1 kW, pole-changing Power connection: 380 Volt, 50 Hz - Spindle speed controlled via 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant system with mechanical pump in the machine base - Quill travel on the vertical milling head: 60 mm - Vertical milling head swivels +/- 90° Lredpfxeiy Ekve Aglor - Metal substructure made of angle iron with machine feet Space requirement L x W x H: 1100 x 900 x 1650 mm Weight: 650 kg Good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Ljdpjhik Ezefx Aglorr Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: used, Univ. universal tool milling machine DECKEL, Type FP 1 Machine No. 51265, Year of manufacture approx. 1967 Travel distances X: 300 mm, Y: 150 mm, Z: 340 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 speeds Motor power 1.0 and 1.6 kW, pole-changing Mains connection 380 volts, 50 Hz - Feed in the X and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill movement on the vertical milling head 60 mm - Swivel, rotary, and tilting angle table - Coolant pump in the machine base - Adjacent control cabinet Ljdpoghtvasfx Aglerr Space required L x W x H 1100 x 1100 x 1600 mm Weight 690 kg Good condition

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Lodpfxeznn Hre Agljrr Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Lrjdpfx Asw A Af Iegljr Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, CNC milling machine ABENE, Type VHF-360TI Serial No. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle mount SK 40 Spindle speed 55 - 3000 rpm, 2 speeds Lsdpfety A Ehsx Aglerr Feed rate 30 - 4000 mm/min, stepless Rapid traverse rate (X + Y-axis) 4000 mm/min. Rapid traverse rate (Z-axis) 2000 mm/min. Distance spindle nose to table 20-495 mm Motor power spindle drive 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with interfaces RS232, USB and LAN - Electronic handwheel for X, Y and Z axis - Mechanical handwheels for X and Y axis - Spindle speed can be manually switched with 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted, swiveling spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric coolant pump located beside the machine - Machine light - Control cabinet firmly attached to the machine - Operating hours read on control system when switched on = 14780 hrs. - Operating hours read on machine when switched on = 12980 hrs. - Operating hours read on program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes Lrjdpfxsr D T U Ds Agler - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: used, Year of construction: 2000, x-travel 1120 mm y-travel 510 mm Lredpfx Agjztfu Dolsr z-travel 510 mm control Mazatrol 640 M

Condition: used, Year of construction: 2003, x-travel 1660 mm y-travel 510 mm z-travel 510 mm Ljdpfx Agsztfuwolerr control Mazatrol 640M

Condition: used, Year of construction: 2014, x-travel 1200 mm y-travel 650 mm z-travel 520 mm control Heidenhain Lrodpsztfuqofx Agler

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 48800 € 932.08 € 40 -3200 U/min ISO 40 600 x 500 x 400 mm 1000 x 500 mm 3.75 kW 1814 kg 1000 mm/min Lrsdpfxsyrhrqe Aglsr 8 14 x 63 mm 300 kg 600 mm 500 mm 400 mm 0 - 600 mm/min. 0 - 600 mm/min. 40 - 3200 40 - 3200 +/- 90° ° 100 mm manuell 3,75 kW 1200 x 250 mm 160 - 660 mm 95 - 495 (2. T-Nut), 180 mm swiveling operating panel 3 axes digital read out Fagor 400ib Innova motor for horizontal- and vertical spindle: 3,75 kW feed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Y/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules

Condition: used, Year of construction: 2023, gebraucht 2023 4546 prompt, Zwischenverkauf v Taiwan 32800 € 1 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1600 mm 1700 mm 2000 mm 1145 kg 840 x 390 mm 1000 mm/min 5 14 x 63 mm 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm demo machine / mint condition net price (price for new machine € 41.800,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details: Lsdowirdgspfx Aglsrr

Condition: used, Year of construction: 2016, x-travel 560 mm y-travel 320 mm z-travel 400 mm turning speeds 25 - 2000 U/min turning speeds 18 Stufen spindle taper ISO 40 SK quill stroke 100 mm table: 320x1000 / 450x950 mm Lrsdpfx Agjzmanxelsr table load 125 kg feed range 5 - 600 mm/min feed 18 Stufen rapid traverse 1200 mm/min total power requirement 5,4 kW weight of the machine ca. 1780 kg. range L-W-H 1800 x 1500 x 1780 mm From a training workshop - good condition (!!) Commissioned in April 2017 Features: - 3-axis digital display - Ball screws on the X and Y axes - Rapid traverse in all 3 directions - Electromagnetic brake for spindle stopping - Coolant system - Chip tray - Vertical milling head with quill adjustment * Milling head rotation 90° * ISO 40 tool holder - Fixed box table 950 x 450 mm * Number/size of T-slots: 7 / 14.0 mm * T-slot spacing: 63 mm * Minimum distance between base table and spindle axis: 163 mm - Machine light - Slatted guard on the vertical column guide - Operatorâ??s manual

Condition: excellent (used), x-travel 450 mm y-travel 175 mm Lsdpfx Aovwgn Dsglsrr z-travel 400 mm spindle turning speed range 60 - 2800 U/min tool taper ISO SK-30 weight of the machine ca. 1 t dimensions of the machine ca. 1,1 x 1 x 1,5 m Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand

Condition: excellent (used), Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm Control MillPlus HEIDENHAIN Lsdpfsvwgp Ujx Aglorr table dimension - longitudinal 1000 mm table dimension - cross 600 mm spindle turning speed range 12000 U/min Number of axles 4 St. rapid traverse 30 m/min tool change unit 24 -fach weight of the machine ca. 9 t The DMU 60 monoBlock is in very good condition and immediately available. Accessories: - Measuring probe

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, 3-axis-Bed Type Milling Machine - Universal | Brand: AUERBACH | Type: FBE 2000 Year of manufacture: 2002, complete overhauled by the manufacturer in 2015 The complete overhaul in 2015 included, amongst other things, the disassembly of all axes, cleaning, reassembly and recommissioning. The machine can be inspected under power by appointment. Condition: Very well maintained / ready for use. Operating hours (July 13, 2026): approx. 40.000 h Last maintenance carried out in 2025, at 36.250 operating hours. TECHNICAL SPECIFICATIONS: Travels: - X-axis: 2.000 mm - Y-axis: 1.000 mm - Z-axis: 900 mm Dimensions / Weight: Dimensions W/D/H: 5,5 (7,15 including chip conveyor) x 4,1 x 2,7 m Machine weight: 13 tons Lredpfxezmn Rue Agljr EQUIPMENT: - CNC control system: Heidenhain TNC 426 - Universal milling head (mechanically swivelling), Brand: SEMPUCO, KFU-2/45/021 - Spindle speed: 3.500 rpm - Tool magazine: 46 positions - Tool holder: SK 50 - Electronic handwheel - 3D infrared measuring probe, brand: m&h Hexagon - Table load: 6 tons - 5 x 22 T-slots in the milling table - Chip conveyor with coolant system - Large air-conditioning unit control cabinet - Drive motor for the Z-axis (spare part) - Documentation in German No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Condition: good (used), Hello, Universal milling machine FY-321 for sale. The machine is fully operational and in continuous use, with the possibility to test on site. The price stated in the advert is net and is subject to VAT. Lrjdpfx Agsxykbielsr The machine can be inspected in Starachowice, at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: good (used), Hello, For sale: Coordinate drilling machine and universal milling machine, type 6T83-1. Lrsdjxyi Stopfx Agler The machine is fully operational and in continuous use; inspection and testing on site are possible. The price listed in the advertisement is net and is subject to VAT. The machine can be viewed in Starachowice, Kwiatkowskiego 13. Telephone contact available from 7:00 to 16:00.

Condition: used, Year of construction: 2008, x-travel 450 mm y-travel 400 mm z-travel 400 mm control Heidenhain Mill Plus V600 Ljdowgi Drjpfx Aglerr weight of the machine ca. 7000 kg

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 500 mm z-travel 500 mm Ljdpfxjwtr Elj Aglerr control Siemens

Condition: used, Year of construction: 2008, travel -x axis 2.100 mm travel -z axis 1.400 mm travel -y axis 1.200 mm control HEIDENHAIN - iTNC 530 numbers of positions in the tool changer 92 tool taper SK 50 BIG PLUS max. tool length 600 mm max. tool diameter 250 mm max. tool weight 20 kg rotary table dia. 1.700 mm max. swing dia. 1.800 mm total connected load 100 A 5-axis simultaneous machining center | REIDEN - BFR-22 equipped with 2-axis swivel head (A+B), NC - rotary table, 92-way tool changer, double gripper, ITC and chip conveyor. Scope of delivery: - probing system The machine has been regularly maintained by the REIDEN factory service team. In recent years, extensive repairs have been carried out and numerous wear parts have been replaced, including a complete overhaul of the milling head with a new intermediate shaft and bearings, as well as various electrical components. Lrodpezlkwzofx Agljr As a result, the machine is in a technically well-maintained and fully operational condition. It can be inspected under power upon request. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: BFR 22 | BFR22