Used Used Milling Machine for sale (88,938)

Condition: like new (used), Year of construction: 1998, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i320 Bdjdpfxezpzxde Agdof Technical features Dimensions Table dimensions: 2000 x 700 mmNumber of T slots: 5T slots dimensions: 22 mm Traverses of axis X axis traverse: 2000 mmY axis traverse: 800 mmZ axis traverse: 800 mmVertical capacity (VC): 22 / 822 mm Milling head U22 manual universal milling headTool clamping system: HydraulicTaper nose: ISO 50 (DIN69871)   /   Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 22 kW Feedrates Working fedérate: 5 - 5000 mm/minRapid fedérate (X,Y,Z): 12000 mm/min Weight and dimensions Maximum weight on table: 3500 kgMachine weight approximate: 9000 kgMachine dimensions approximate: 5265 x 2900 x 2760 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC-20 randomElectronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Cross-cut saw: max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm Bedpfx Agszh Hxaedjdf motor 3.7kW side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm dimensions (L/W/H) 1700x2050x1260mm weight approx. 500kg ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2009, x-travel 2.360/2x 930 mm y-travel 600 mm z-travel 600 mm table surface area 2.750 x 600 mm Control Siemens 840 D spindle tunring speed 30 - 6.000 U/min tool taper SK 50 number of tool places 26 Pos. Number of working hours ca. 50.884 h Bdodpfx Agozqgh Hodof connected load 69 KVA weight of the machine ca. 20 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel, Heidenhain HR 410 - Chip conveyor - External belt filtration system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), max. workpiece diameter 300 mm hobbing length 1000 mm clamping length 2400 mm spindle head ISO 40 distance work spindle /surface of the table 180 - 330 mm surface area 2410 x 375 mm longitudinal feed 1000 mm vertical movement of the milling spindle 150 mm turning speeds 45 - 500 U/min weight of the machine ca. 5,6 t Bsdpfx Ajzq Hl Sogdedf dimensions of the machine ca. 3,0 x 1,6 x 1,9 m

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Universal milling machine EMCO FB-4 with 3-axis digital display Heidenhain, in very good condition. Technical data: >> Year of manufacture: 1997 >> Fixed angular table (clamping area 800 x 400 mm) >> Speed: 18 speed stages from 63 - 3150 rpm >> Mechanical feed: 18 stages Feed rate X and Y: 16-800 mm/min Feed rate Z: 8-400 mm/min Rapid traverse X and Y: 2400 mm/min Rapid traverse Z: 1200 mm/min >> Travels X/Y/Z: 450/300/350 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill, extendable 100 mm >> Tool holder: SK40 >> Weight approx. 1500 kg >> Machine dimensions L x W x H: 1485 x 1475 x 1680 mm >> Motor brake >> Connection value: 4 kVA Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Chip tray, machine feet Bjdpfx Aszq Efqogdsdf >> Operating manual, spare parts list About the machine: Offered is a universal milling machine EMCO FB-4 in very good condition. The EMCO runs very smoothly, even at high speeds. The vertical milling head is fastened with four screws and can be easily swung to the side using the articulated arm visible on the left side of the machine. Feed and rapid traverse in each axis. The Emco comes from a training workshop and has been used very little. Take advantage of the opportunity to inspect and test the machine on-site while it is powered up.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Kunzmann WF7/3 tool milling machine with Heidenhain TNC 124 control – in SUPER condition, CE compliant!! Technical data: >> Year of manufacture 2007, machine no. 370648 >> Swiveling and tilting table 6 mounting slots Slot width 14 H7 Slot spacing 63 mm Maximum load 300 kg >> Spindle speeds S I 1 – 1125 min-1 Spindle speeds S II 1126 – 4500 min-1 >> Feed rate (potentiometer 100%) longitudinal and transverse 0 – 2000 mm/min Rapid traverse longitudinal and transverse 5000 mm/min Feed rate vertical 0 – 2000 mm/min Rapid traverse vertical 4000 mm/min >> Travel distances X/Y/Z: 600/400/400 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 2000 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor: 7.5 kW Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication Bodpjzq Edmsfx Agdodf >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the machine: We offer a Kunzmann WF7/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good condition. A special feature of this machine is the 4th axis and a digital display for the quill. It comes from a company belonging to an automotive manufacturer, where it was used primarily for training purposes. It has a very user-friendly control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are lubricated regularly by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site while it is powered up.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, COLLECTIVE LISTING - 3 FICEP EXCALIBUR CNC BEAM DRILLING LINES Three refurbished CNC single-spindle beam drilling lines from the Ficep Excalibur series: two Excalibur 12 (1201 DE, year 2013) and one Excalibur 6 (601 DE, year approx. 2011). Together they form a graduated profile-processing line (up to 1,200 mm and up to 610 mm). EACH MACHINE AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT (all three lines) All three machines have been refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). === MACHINES 1 + 2: FICEP EXCALIBUR 12 / 1201 DE / YEAR 2013 === Two identical lines, serial numbers 33900 and 34062. CNC single-spindle beam drilling line based on the moving-column principle. The moving drill head with direct drive performs drilling, countersinking, tapping, milling and scribing in a single pass. - Profile cross-section: max. 1,200 x 800 mm, min. 50 x 50 mm | length up to 12 m | CE - Profile shapes: I-beams, channels, angles, flat bar, square/rectangular hollow sections - Drill head: 1, direct drive, 19 kW | 180-4,000 rpm | max. drilling diameter 28 mm - Drilling feed: ball screw, servo-driven | CNC axes: 5 - X-axis: travel 0-15,000 mm, 35 m/min | Y-axis: 12 m/min | rack and pinion - Tool changer: 6-position automatic (ATC), HSK A80 - Clamping: hydraulic double-acting | Profile detection: laser, non-contact - Coolant internal (through spindle) and external - Control: Ficep Pegaso CNC (PC/CNC/PLC integrated), remote diagnostics via network Bjdpfxjv Iamzo Agdsdf - Interfaces: DSTV, DXF, XML (Tekla) | Table: 15 m long, approx. 3,300 mm wide Scope of delivery per line: drilling unit 19 kW | support table with guide rail 15 m | 6-position ATC (HSK A80) | Pegaso CNC | radio remote control | coolant system. === MACHINE 3: FICEP EXCALIBUR 6 / 601 DE / YEAR APPROX. 2011 === Serial number 32754. More compact line with moving drill cabin, workpiece stationary on the clamping frame. - Profile cross-section: max. 610 x 610 mm, min. 30 x 30 mm | I-beam web height up to 610 mm - Max. machining length: 12,000 mm | X-axis traverse 0-12,000 mm, rack and pinion - Profile shapes: I-beams, angles, UPN channels, flat bar, square/rectangular tube - Drilling spindle: 1, 7.5 kW | max. drilling diameter 22 mm | manual change (quick-change chuck) - Operations: drilling, countersinking, tapping (with suitable tooling) - Clamping: double-acting automatic (top/bottom), min. 30 x 30 mm - Control: Mitrol CNC (Ficep Group) Scope of delivery: beam drilling line 601 DE | Mitrol CNC | traverse frame 12,000 mm | length measuring/positioning system X-axis (configuration confirmed during inspection) | automatic clamping system | quick-change chuck. Machine weights, rated voltage and footprint per line follow on request. LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Price on request - individually or as a package | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2022, x-travel 2.600 mm y-travel 1.100 mm z-travel 900 mm control 840 D sl Celos Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 kW max. Torque 120 Nm tool taper SK 40 DIN 69871 swivellable B: +/- 100 ° table surface area 3.200 x 1.100 mm max. table load 4.000 kg max. workpiece height 972 mm rotary table dia. 1.050 mm C-Axis 360 ° max. workpiece weight 1.200 kg number of toolpositions 120 pos. tool taper SK 40 DIN 69871 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Bdedpfx Aezqvmxogdef max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min feed power XYZ: 12 / 10 / 12 kN total power requirement 68 kVA weight of the machine ca. 28 t dimensions of the machine ca. 9,0 x 6,0 x 3,3 m 5 Axis CNC - Travel Column Milling Machine DMG-MORI - DMF 260 11 - Swivel-Millinghead (B-Axis) - NC rotary table (C-axis) - only approx. 4,930 spindle hours - only approx. 15,000 power-on hours - WITHOUT clamping devices, WITHOUT tools

Condition: like new (used), Year of construction: 2001, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 6000 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis Longitudinal traverse X: 5300 mmVertical traverse Y: 1050 mmTransversal traverse Z: 1500 mmVertical capacity (VC): 80 - 1130 Milling head Head type: Fixed frontalTool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872-BSpeed range: 60 - 3000 rpmSpindle power: 22/30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X,Y,Z): 10000 mm/min Weight and dimensions Maximum weight on table: UndeterminedMachine weight approximate: 43000 kgMachine dimensions approximate: 11560 x 6150 x 3538 mm Accessories Guarding: 2 front sliding doorsAutomatic tool changer: ATC40Chip conveyor: 2 longitudinals hinge typeElectronic handwheel: HR-410Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Bdodpougbrqofx Agdsf

Condition: used, Year of construction: 1991, Technical details: x-travel: 500 mm y-travel: 380 mm z-travel: 350 mm total power requirement: 8 kW drive capacity - main drive: 2,2 kW Bodozp Rzhjpfx Agdodf table-size: 800 x 360 mm tool taper: SK 40 weight of the machine ca.: 1,8 t

Condition: like new (used), Double-sided profiling milling and grinding machine, model Uinze 4T2500STD - Year of manufacture: 2023 Bjdpfx Aszqgmcegdodf - New price: €64,000 - Machine is equipped with 2 special carbide milling heads and 2 grinding units - Weight: 4300 kg - Safety fence: 800 kg, safety roller gate: 300 kg - Working length: 2500 mm, working width: 170 mm - Motor power: milling unit 4.5 kW, grinding unit 4.5 kW - Table return speed: 80-100 m/min - Milling speed: 4000 rpm

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis Active TNC 113 - Digital display Heidenhain, point-to-point control, stepless feed Technical data: >> Year of manufacture 1980, machine no. 2302-2430 >> 3 axes, digital active display TNC 113 >> Swivel-tilt table (clamping area 1000 mm x 520 mm) >> Speed: 25 - 2500 rpm >> Feed and rapid traverse in 3 axes >> Feed from 5 to 500 mm/min, stepless >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2 / 4 KW >> Travels X/Y/Z: 800/300/400 mm (Y travel can be adjusted by an additional 200 mm) >> Equipment: Vertical & horizontal spindle >> Vertical and horizontal quill, extendable - SK-40 >> Collet system S20x2 >> Weight approx. 2500 kg Accessories and equipment: >> 3-axis active digital display Heidenhain >> Coolant system About the machine: Bdodpfszquq Nsx Agdsf Offered is a Deckel FP3L universal milling machine in very good condition. The vertical head can be moved by 200 mm to enable an even larger working area. Even at maximum speeds, the milling machine runs smoothly. A central pump ensures lubrication of the various axes. The special feature of this machine type is its basic design; it is a machine with a slanted table bed. The movements are assigned to the spindle and thus to the tool. The accuracy is therefore very high, as different workpiece weights have no influence on the axis movements. Mechanically and electrically inspected. In this newer FP3L model, the feed can be adjusted steplessly in three axes; the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain point-to-point control, you can enter dimensions that the machine will automatically move to. Take advantage of the opportunity to inspect and test the Deckel on-site while it is powered. For an additional charge, the machine can be delivered with CE conformity.

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Bdjdpfxozpfg Es Agdef Machine has 12.000 spindle hours. X-Axis travel: 800 mm Y-Axis travel: 800 mm Z-Axis travel: 550 mm Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Spindle: HSK-A63 18.000 RPM Machine will be in stock in 2 weeks

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, feed length X-axis: 445 mm, feed length Y-axis: 195 mm, feed length Z-axis: 415 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 75 rpm, quill stroke: 125 mm, table width: 240 mm, table length: 800 mm, Warco Milling Machine Model: Super Major Vario Year: 2018 Table Area: 800 x 240mm Long Travel: 445mm Cross Travel: 195mm Vertical Travel: 415mm Quill Stroke: 125mm Spindle Taper: R8 Bdedszlhtmjpfx Agdef Spindle Speed: 75 – 2500 RPM Machine With: Vice Dividing Head Some Tooling Stand Digital Readout Dimensions: 1270 x 930 x 2670mm High Weight: 500 KGS

Condition: used, Year of construction: 2023, operating hours: 100 h, machine/vehicle number: R91, Used SRAML RBB-LT300 bag in box filler machine - Year 2023Technical Specifications & Performance DataThe Sraml RBB-LT300 is a compact, single-head Bag-in-Box filling machine engineered for reliable hot-fill applications in beverage production. Designed for industrial packaging environments, this unit supports a wide range of bag sizes and delivers consistent, hygienic fills that meet modern quality expectations. As part of a used bottling line or as a standalone filler, it offers dependable throughput and straightforward integration with downstream packaging machinery.Manufacturer: SramlModel: RBB-LT300Year: 2023Production speed: Up to 260 bags/hour (at 5.0L)Formats: Compatible with 3.0L to 20.0L Bag-in-BoxFilling heads: 1Neck/fitment: VitopPower: 1.5 kWVoltage/Frequency: 400 V / 50 HzDimensions (L x W x H): 930 mm x 1170 mm x 2090 mmWeight: 120 kgAdvanced Automation & Control SystemsThe RBB-LT300 is built for efficient, repeatable operations with simplified operator controls and process reliability. It includes an integrated buffer tank to stabilize product flow and a CIP attachment point to connect with plant cleaning systems, supporting hygienic operation and reduced changeover downtime. Quick mechanical adjustments enable efficient format transitions across supported bag sizes without complex tools.Integrated buffer tank for stable product feedingCIP attachment for streamlined cleaning integrationHot-fill oriented design suitable for juice applicationsOperator-friendly controls for setup and run modesConsistent dosing accuracy with a single filling headProduction Line Integration CapabilitiesThis Bag-in-Box filler can operate as a standalone station or be integrated into a complete second hand or new industrial packaging line. It pairs naturally with case/box handling, carton erecting, packing, and palletizing solutions. The machine’s footprint and utilities make it straightforward to position upstream of sealing and boxing stations in beverage production environments.Standalone or inline operationCompatible with Bag-in-Box downstream equipmentFlexible format range from 3.0L to 20.0LIdeal for integration in used bottling line upgradesMachine Condition & Maintenance HistoryManufactured in 2023 and showing under 100 operating hours, this unit presents as a late-model, low-use filler. It is functional and ready for operation, offering a near-new alternative for producers seeking dependable performance without the lead times of new equipment.Low-use machine with under 100 hoursFunctional and ready for operationRecent manufacturing year supports long service lifeOperational Performance & VersatilityOptimized for hot-fill beverage production, the RBB-LT300 handles Bag-in-Box applications for products such as apple juice and similar liquids... Bdjdozrgrnjpfx Agdef

Condition: used, machine/vehicle number: R92, Used KOSME rotary bottle filling machineTechnical Specifications & Performance DataThis rotary rinser-filler is engineered by KOSME for precise, reliable wine bottling within industrial packaging environments. The carousel configuration ensures consistent bottle handling and steady throughput suitable for beverage production, including second hand and used bottling line integrations.Machine type: Rotary rinser-filler (carousel)Manufacturer: KOSMEPrimary application: Still wine fillingProduction speed: Typically a few thousand bottles per hour (configuration-dependent)Bottle size range: Approx. 0.25L to 1.5L (typical 0.75L wine format)Containers: Glass bottlesFilling principle: Level-controlled gravity or light vacuum (light depression)Rinsing: Integrated rinser with three spray stagesProduct contact materials: Stainless steelEnclosure: Glazed, lockable safety guardingAdvanced Automation & Control SystemsThe machine supports both automatic and manual operation to adapt to production needs and changeovers. Operator controls promote safe, efficient handling while maintaining high-quality filling.Automatic/manual mode selectorManual jog and machine start/stop controlsSpeed control for carousel rotation and process optimizationEmergency stop and reset-to-zero functionsLight signal for status indicationGate interlock and glazed safety enclosure for operator protectionDedicated rinsing control with three spray stagesProduction Line Integration CapabilitiesDesigned for seamless integration into a used bottling line or operation as a standalone unit, this rotary rinser-filler interfaces easily with upstream depalletizing/inspection and downstream labeling, capsule application, and secondary packaging machinery. Its glass-bottle handling and stable carousel motion support consistent infeed and discharge on standard conveyor systems.Inline or standalone operationCompatible with conveyors and accumulation systemsFormat range suited to common wine bottles: 0.25L, 0.75L, 1.5LIdeal for beverage production environments focusing on wineMachine Condition & Maintenance HistoryThe machine has operated in a well-maintained environment and features a full glazed, lockable enclosure that preserves hygiene and safety. Backed by KOSME engineering, spare parts and service support are readily accessible through established industrial channels. The overall condition is aligned with second hand equipment prepared for reliable start-up in professional beverage production.Operational Performance & VersatilityPurpose-built for still wine, the level-controlled gravity or light-vacuum system ensures consistent fill levels across a range of formats without over-pressurizing glass containers. The stainless steel product-contact surfaces support hygienic operation and quick cleaning, while the integrated rinser with three spray sta... Bdedpfezrgrbsx Agdsf

Condition: used, Year of construction: 2001, machine/vehicle number: M346, Used MBF Synchrofil LV filling machine 7000 BPHTechnical Specifications & Performance DataThis MBF filling monoblock delivers reliable performance for beverage production within a used bottling line or as a standalone station in industrial packaging environments. Built for hot and cold filling processes, it provides steady output and quality control for second hand bottling operations seeking dependable equipment.Manufacturer: MBFModel code: LV 1200-35 / 240-4VYear of manufacture: 2001Production speed: 7000 bphFiller configuration: 35 valvesFilling technology: Gravity with light vacuum (low vacuum)Capping: alluminio MCA 28x15 mmRotation direction: ClockwiseWorked formats: Compatible with 0.5L and 1.0L bottle formatsDesigned for bottle handling: Cylindrical containersElectrical supply: 380 V, 50 HzCompressed air consumption: 200 Nl/min at 0.6 MPaMachine weight: 4000 kgSafety features: Integrated protections and guardsDocumentation: Manuals and maintenance documentation availableDimension: Width x Height x Depth: 3.40 m x 2.60 m x 2.30 mAdvanced Automation & Control SystemsThe monoblock is engineered for consistent operation and straightforward control within beverage production. Safety circuits, interlocked guards, and emergency stops support safe operation. Format changeovers between 0.5L and 1.0L are supported with dedicated change parts and adjustments suited to gravity/light vacuum filling. The electrical configuration at 380 V and 50 Hz aligns with common industrial standards for packaging machinery, facilitating integration into existing control architectures and line PLC/HMI systems.Production Line Integration CapabilitiesThis filling monoblock integrates seamlessly into a complete used bottling line, upstream of capping and downstream of rinsing or bottle preparation equipment. It can operate as part of a larger bottling equipment layout with conveyors, labelers, and secondary packaging machines, supporting industrial packaging requirements for a wide range of beverage production scenarios.Inline or standalone operationCompatible with standard conveyor systemsFormat flexibility for 0.5L and 1.0L bottlesSuitable for hot and cold filling applicationsMachine Condition & Maintenance HistoryThe machine is currently in production, indicating proven operational status. Manuals and maintenance documentation are available to support installation, operation, and service. Spare parts availability is confirmed, supporting uptime and long-term reliability in second hand bottling operations.Operational Performance & VersatilityThe gravity with light vacuum system provides gentle product handling and stable fill levels, ideal for still beverages and applications benefiting from low vacuum assi... Bdjdpfx Aezrgq Djgdof

Condition: used, Year of construction: 1996, operating hours: 26,000 h, machine/vehicle number: R94, Used Tetra Pak TBA 19 200ML Slim Filling machineTechnical Specifications & Performance DataThis aseptic carton filling machine is a second hand Tetra Pak TBA 19 V10 configured for the 200 ml Slim format. It has been workshop checked, fully tested, and received a total refurbishment in 2026 to ensure reliable performance for industrial packaging and beverage production environments. Ideal for a used bottling line upgrade or as a standalone aseptic packaging cell, it integrates smoothly with downstream equipment for complete end-of-line solutions.Manufacturer: Tetra PakModel: TBA 19 V10Machine type: Aseptic carton filling machineYear of manufacture: Approx. 1996Running hours: Approx. 26,000Format/volume: 200 ml SlimRefurbishment: Total refurbishment completed in 2026General condition: Workshop checked, fully tested, good working orderIncluded line components: Straw applicator Tetra Pak TSA 21; Tray packer Tetra Pak TCBP 70 Multiinfeed (compatible/optional for wrap-around); Tray shrink wrapper Tetra Pak TTS 51; Approx. 30 m conveyor system with 4 x 90° curves and 2 x chain tensionersAdvanced Automation & Control SystemsEngineered for consistent aseptic performance, this filling machine features an integrated control philosophy typical of Tetra Pak systems, supporting efficient start-up, stable throughput, and simplified format handling for the 200 ml Slim line. Centralized operator control via HMI streamlines operations and facilitates guided changeovers and diagnostics. The machine has been fully tested under workshop conditions, with live online test runs available to verify automation responses and process stability using water-filled packages. Safety interlocks and guarding are present across the production cell to protect operators during operation and maintenance.Production Line Integration CapabilitiesThe TBA 19 V10 can operate as a standalone aseptic filler or as part of a complete used bottling line for beverage production. The included conveyor set—approximately 30 meters with four 90° curves and two chain tensioners—ensures smooth transfers to downstream packaging modules. The TCBP 70 Multiinfeed tray packer is compatible/optional for wrap-around applications, while the TTS 51 tray shrink wrapper provides flexible secondary packaging options.Machine type/categoryManufacturer / ModelYearFilling MachineTetra Pak TBA 19 V101996 (approx.)Straw ApplicatorTetra Pak TSA 21ConveyorsApprox. 30 m with 4 x 90° curves, 2 x chain tensioners Bsdpfozrgqwsx Agdjdf

Condition: used, Year of construction: 2012, machine/vehicle number: SO141, Used MORETTO EPL 5-8 N blow molding machine - Year 2012Technical Specifications & Performance DataThis extrusion blow molding machine is engineered for producing hollow plastic containers with high repeatability and efficiency. Manufactured by Magic with a full-electric drive concept, it is equipped for industrial packaging and beverage production environments where precision, uptime, and energy efficiency are critical. It suits used bottling line upgrades and second hand equipment integrations requiring robust blow molding capabilities.Blow molding process: Extrusion blow molding, full electricMaximum blown container volume: 8000 cm³Clamping force: 100 kNSpeed: around 200 Unit/hour for ( Distilled water container ) Dry cycle time: 2.2 sOpening stroke: 250 mmMaximum mold dimensions (L × P × A): 425 / 2x130 / 400 mmGeneral electrical power: 15 kWTotal installed electrical power: 64 kWExtruder screw diameter: 70 mmExtruder L/D: 24 L/DExtruder motor power: 35 kWExtruder heating zones: 5Extruder heating power: 10.6 kWSingle extrusion head max die diameter: 100 mmHead heating zones: 4Head heating power: 3.8 kWMachine footprint (W × L × H): 1900 × 5050 × 3250 mmTotal system weight: 7000 kgNoise level: 75 dB(A)Advanced Automation & Control SystemsThe full-electric architecture enhances precision and repeatability while minimizing energy consumption and maintenance compared to hydraulic systems. Fast dry-cycle performance supports higher throughput and stable cycle times. Temperature control across multiple heating zones on the extruder and head ensures consistent parison quality and stable process control for demanding industrial packaging applications.Full-electric drive for efficient, clean operationMulti-zone temperature management on extruder and die headStable, repeatable dry cycle for consistent productionOperator-friendly adjustments and setup for mold changesProcess reliability suitable for stringent quality requirementsProduction Line Integration CapabilitiesThis machine integrates smoothly within a used bottling line or a mixed-manufacturer production environment. It comes with a comprehensive set of auxiliaries to streamline upstream and downstream handling, supporting end-to-end beverage production or industrial packaging workflows.Included auxiliaries: hopper feeders, suction unit, dryer, granulator, cooler, color mixer, conveyorsAuxiliaries brand: Moretto (most components purchased new in 2012)Inline or standalone operation for flexible layoutsSupports diverse container geometries enabled by robust clamping and mold size window... Bdedpfx Agozrgqksdsf

Condition: used, Year of construction: 2000, machine/vehicle number: SO142, Used MAGIC MOD. MGL5 blow molding machineTechnical Specifications & Performance DataThis extrusion blow molding machine is engineered for producing hollow plastic containers with consistent quality and reliability. Configured with a single carriage and single head, it is tailored for medium-format containers up to 5.0 liters, offering robust performance for industrial packaging applications. The machine has undergone a major overhaul and is in perfect working order, both mechanically and electronically.Maximum container volume: 5.0 LMachine type: Extrusion blow molding, single carriage, single headClamping force: 83 kNHydraulic working pressure: 160 barBlow nozzle pressure: 0–70 barExtruder screw diameter: 70 mmExtruder motor power: 29 kWExtruder heating power: 10.6 kWHead heating power (single head): 3.4 kWMaximum die diameter (single head): 120 mmMold opening stroke: 210 mmMaximum mold dimensions (W – Thickness – H): 400 / 2×110 / 400 mmHydraulic pump/Power unit motor: 18.5 kWInstalled power (total): 62 kWAverage electrical consumption: 40 kWBlowing air pressure: 6–8 barAir consumption: 800 Nl/minCooling water pressure: 2–3 barCooling capacity (water): 30,000 Kcal/hHydraulic oil tank capacity: 270 LMachine footprint (W × L × H): 2200 × 4250 × 2900 mmComplete system weight: 7000 kgModel code: MGL5Advanced Automation & Control SystemsThe machine is equipped with a new Gefran PLC, delivering updated electronic control and a modernized program to ensure repeatable cycles, reliable temperature regulation, and stable extrusion. Multi-zone temperature management covers the extruder and head heating, providing precise control over melt conditions and wall thickness quality. Operator-friendly diagnostics support fast setup and streamlined troubleshooting, while integrated interlocks and status monitoring promote safe, efficient operation. The control architecture supports consistent processing of HDPE with accurate setpoint management, alarms, and real-time process visibility.Production Line Integration CapabilitiesDesigned for straightforward integration into industrial packaging and used bottling line environments, the machine features a part discharge belt conveyor for clean outfeed handling. It can be paired with downstream trimming, leak testing, visual inspection, and packing systems to create a complete second hand production cell. Format compatibility focuses on containers up to 5.0 liters, with a structure well-suited for HDPE bottles, jerrycans, and similar industrial packaging formats.Machine Condition & Maintenance HistoryThe unit is reported in excellent condition and fully oper... Bsdpfjzrgp Tsx Agdedf

Condition: used, PARPAS Type AU engraving tool grinding machine Manufacturer's No. 854/36 Year of manufacture 1971 Grinding wheel diameter 100 mm Grinding spindle speed approx. 3500 rpm Motor power approx. 0.55 kW Bodpfx Agsdzp T Tjdodf Mains connection 380 volts, 50 Hz - Collet chuck (DECKEL system with S20x2) - Collet chuck Ø 15.0 mm - Diamond grinding wheel dresser for the face of the grinding wheel Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg good condition

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs for turning and milling operations can be stored. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear using fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed levels adjustable via V-belt, and within each level, operation can be continuously adjusted using a frequency inverter. Speed level 1: 200 - 2000 RPM Bdedpfezfwm Nex Agdof Speed level 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed adjustable continuously, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Extensive accessories: Ring steady rest with front turning tool and insert guide. Four-jaw steady rest Four-jaw chuck 125mm Copy tools, center points, hexagonal drive, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition from a small carpentry shop. The machine was apparently not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: like new (used), Year of construction: 2000, Retrofitted: 2026 Bodpfx Aeznpczegdedf Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 5600 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mmDistance between columns: 2700 mm Milling head Milling head model 1: UAGA orthogonal auto-indexing BC (2,5º)Tool clamping system: HydraulicTaper nose: ISO-50 (DIN69871)   /   Pull stud: (DIN69872)Speed range: 3000 rpmSpindle power: 30 kW Milling head model 2: FA large vertical spindleTool clamping system: HydraulicTaper nose: ISO-50 (DIN69871)   /   Pull stud: (DIN69872)Speed range: 3000 rpmSpindle power: 30 kW Milling head model 3: Direct spindleTool clamping system: HydraulicTaper nose: ISO-50 (DIN69871)   /   Pull stud: (DIN69872)Speed range: 5000 rpmSpindle power: 37 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25000 KgMachine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5738 x 5850 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceMilling head changer: Semi-automatic with hinges on columnAutomatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high-pressure through spindle (only in direct spindle) Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 / 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accessories Guarding: 2 slidings doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features Bdjdpfxoyf Rrto Agdsf

Condition: used, machine/vehicle number: 2886000746-2, This Deckel Maho CNC milling machine, model: DMC 103V, will be auctioned online as part of our industrial auction / machine auction due to the closure of the J&S GmbH Automotive Technology - BGA - workshop, including workshop equipment, tools, storage equipment, materials, office furniture, and canteen equipment. Bdsdpozp Dg Dofx Agdef You can find this and many other items on our platform.