Used Uv Curing for sale (974)

Condition: used, Submitting a bid obligates you to collect the item by December 23, 2026! Personalization line with the following configuration: Kirk-Rudy feeder (serial number: 1710 283) Infeed roller table (serial number: 1505 27) Phoenix printing unit (serial number: 1808 119) UV light module (serial number: 520378) Outfeed conveyor belt (serial number: 1710 4666) Control unit (serial number: 1808 1248) Dkodpfo Agvrnox Ak Aow Note: Accessories are provided without warranty. The following applies: "Item sold as is." The potential buyer must verify the completeness of the item on-site.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Dedpfxo Aa Ad Te Ak Aokw Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: reconditioned (used), Technical Specifications Product Number 1510 Loading chamber dimensions: 87x87x390 mm Height: 1000 mm Width: 600 mm Length: 1200 mm Total power: 2.5 kW Power supply: Electrical: 400V 50Hz 5N Dsdpfez H A Uxox Ak Askw Main material: Stainless steel, acid-resistant Max weight: 170 kg Machine in perfect condition after service New hydraulic oil New safety sensor for the flap Possibility of cutting cubes with dimensions: 29 x 29 mm – Or other dimensions, depending on customer requirements – We can adapt the cutting grids to the customer's needs. Maximum cube length 40 mm, hydraulically adjustable Intended use: Slicing into slices, cubes, and strips Cutting boneless meat, cured meats, ham, bacon, lard, fish, as well as vegetables and fruits – fresh and chilled products at a temperature of +4°C to 0°C Suitable for small meat processing plants, supermarkets, and catering companies General characteristics: Mechanical capacity: 900 kg/h Slicing blade available Compact design Made of high-quality steel The device meets the highest hygiene standards Easily and quickly removable components Net price Video showing the machine in operation:

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10342, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Dkedpfx Aksz Dugnj Aow Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: used, maximum load weight: 15,170 kg, overall weight: 18,000 kg, first registration: 10/2014, total width: 2,480 mm, total height: 1,255 mm, Year of construction: 2014, Equipment: ABS, Krone Trailer, Standard Model * Disc brakes * ABS * Air suspension * 2 x SAF air-suspended axles * Lifting/lowering system Dsdps Ahp U Rjfx Ak Aekw * Tire size: 385/65 R22.5, steel rims * Tire condition: average: ~6.5 mm - German-made trailer! - First owner! - Inspection/MOT: new! Errors and prior sale excepted!

Condition: ready for operation (used), Bosch UVF 160L / 4C-21S - UVF 160L/4C-21S servo motor, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of delivery as per photos. NOTE: Please request a separate quote for packaging and shipping costs! Dkjdpfx Aei D Hhkok Ajw

Condition: used, Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinding machine, center grinding machine Dkodofig Suepfx Ak Asw -Precision universal cylindrical grinding machine -Max. Shaft diameter: 203 mm -Max. Grinding length: 490 mm -Collet: Ø 32 x 87 mm -Grinding wheels diameter: 160 mm -Dimensions: 1660/1500/H1500 mm -Weight: 1802 kg

Condition: refurbished (used), Our Leybold RUVAC RA9001 Roots-blower pumps will: Dodpfxofq D Eqe Ak Aekw be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Condition: refurbished (used), Our Leybold RUVAC RA7001 Roots-blower pumps will: be good as new Dkjdpfsfq D Hrex Ak Asw be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Condition: used, machine/vehicle number: 1 284 066, Feed diameter: 200 mm Dksdocm Tgkjpfx Ak Aew Through-hole: 50 mm Mounting, short taper according to DIN 55027: Size 6 Outer diameter of the clamping cylinder: 290 mm Overall height (clamping cylinder to the front of the chuck, without jaws): 150 mm pneumatically actuated

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Dkedpfxehxvu Es Ak Aew Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manufacturer: Bosch, injection pump from generator MWM RHS 518V16 -Injection pump: Bosch EP/RSUV300-750P9/332/1R PE8P120/520RS190 -Feed pump: Bosch FP/K 22 P11 -Shaft: Ø20 - 25mm / M18x1.5 Dsdpeivfgfofx Ak Aokw -Individual components: see photos -Dimensions: 1000/170/H290 mm -Weight: 41 kg

Year of construction: 2025, condition: new, Manufacturer: Consolidated / Baker Hughes Djdpsz Nh Idjfx Ak Aokw Model: 1910-00K-1-CC-MS-31-RF-LA-HP-PED Year of manufacture: 2025 Quantity available: 3 units Condition: New surplus equipment, visually in excellent condition We offer three Consolidated 1910 Series industrial safety relief valves, manufactured in July 2025 by Dresser Italia S.r.l. The valves are designed for liquid service and feature original manufacturer identification plates with CE, ASME UV, and NB markings. Technical specifications: Series: Consolidated 1910 Outlet size: 3" / DN80 Service medium: Liquid Set pressure: 9.5 bar / 10.7 bar Nominal lift: 15.37 mm Flow area: 1,379.35 mm² Manufacturer: Dresser Italia S.r.l., Italy Manufacturing date: 07/2025 Available units: Serial number: N-25-006784 – Set pressure: 9.5 barg – Tag: SVP773 Serial number: N-25-006986 – Set pressure: 10.7 barg – Tag: SVP1122 Serial number: N-25-006785 – Set pressure: 9.5 barg – Tag: SVP775 Condition and documentation: The valves are in visually excellent condition. Previous installation or operating history has not been confirmed. Individual test certificates are not currently available. Available from our warehouse in Rotterdam, the Netherlands. Worldwide shipping can be arranged upon request. Please contact us for additional pictures, technical information, or a quotation.

Condition: used, mileage: 441,000 km, power: 290 kW (394.29 HP), first registration: 03/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Advertisement/Vehicle No.: MTG18BDF * Office: * WhatsApp: * Mobile: * E-Mail: * Website: We offer rental of various trucks + semi-trailer tractors + trailers for short or long-term rental. 7.5-ton trucks are available from €699.00 and 18-ton trucks from €1,000.00 per month, with short-term availability! Contact us. 1x Mercedes Benz Actros 25 interchangeable chassis with BÄR 2.0t tail lift Year of manufacture: 03-18 * Mileage: 441,000 km * Euro 6 with AdBlue * BÄR 2.0 t tail lift * Wheelbase 4,600 mm * Air suspension * Lifting axle * Trailer coupling * Air conditioning * Cab with 1 bed * Electric lift roof Dsdjzyfayopfx Ak Ajkw * Cruise control * Refrigerator * Multifunction steering wheel * Navigation system * Radio with CD, Bluetooth * 2x 500-liter tank * Tires: 385/55 R22.5 front * Tires: 315/70 R22.5 rear * Tires: 385/55 R22.5 lifting axle * German vehicle * 1st owner, accident-free, very well maintained * FULL SERVICE at Mercedes Benz * TÜV (technical inspection) valid until 03-27 Net price - trade-ins possible - Rental/Financing/Leasing brokerage - Subject to changes, prior sale, typographical errors and mistakes! We only deal with well-maintained German vehicles. Our services: all customs/export documents, Euro 1 * Short-term registration / 5 days * Customs registration / 30 days * Vehicle delivery * Vehicle collection * Main inspection and safety check Our contact details and opening hours: Office: * WhatsApp: * Mobile: * E-Mail: * Website: * Monday - Friday: 09:00 - 18:00 * Saturday: by appointment

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK Dkedpfxsx Hh A Ho Ak Ajw o Single-pass opaque white o Gamut extension o Custom spot colors _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Condition: used, This listing is for the CAS Biomat 2 Microbiological Safety Cabinet + Formalin Vaporiser The unit is in full working condition and is ready for immediate use The CAS Biomat 2 (manufactured by Contained Air Solutions) is a high-performance Class 2 Microbiological Safety Cabinet designed to provide a sterile environment for both the user and the sample. It is ideally suited for laboratories working with biological agents up to Biosafety Level 3. Dksdpfxsyvhn Ie Ak Aow Key Features & Functionality: Triple Protection: Utilises a sophisticated airflow system (inflow and downflow) to protect the operator from airborne hazards, ensure product sterility via HEPA-filtered laminar air, and safeguard the environment by filtering exhaust air. Certified Safety: Fully compliant with BS EN 12469:2000 standards, ensuring it meets rigorous European safety requirements for biological workstations. Advanced Filtration: Equipped with high-efficiency H14 HEPA filters to create an ISO Class 5 clean environment. User-Friendly Control: Features an intuitive control panel for managing work area lighting, gas valves, and decontamination cycles. Integrated Decontamination: Includes built-in functionality for UV sterilisation and formalin fumigation, with some models featuring real-time status monitoring and VHP (Vaporised Hydrogen Peroxide) ports for thorough cleaning. Practical Design: Often includes internal electrical sockets for equipment like balances or stirrers, pipette holders, and energy-efficient LED lighting.

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. The system has seen light use within a small digital printing operation and has processed under 75,000 laminated sheets since new. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Dodpfjyxp Nxjx Ak Askw Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Condition: used, Year of construction: 2000, Overview The SAME barrel support cradles are V-shaped metal supports specifically designed for wineries, ensuring stable and secure positioning of oak barrels during storage, handling, and washing operations. Their geometry guarantees optimal load distribution and perfect barrel support, reducing stress on the barrel structure. SAME standard supports are fully compatible with automated barrel washing lines, making them ideal for professional cellar operations. Technical Data:  A total of 488 units are included in this lot. Key Features - Equipment Type: Barrel support cradles / sleepers for wineries - Design: V-shaped structure for secure barrel positioning - Barrel Capacity: 2 barrels per support - Compatible Barrel Sizes: 225 to 700 liters - Manufacturing Process: Robotic MAG continuous wire welding - Structural Strength: High resistance to load, handling, and mechanical stress - Surface Finish: Oven-cured polyester powder coating - Compatibility: Suitable for automated barrel washing systems - Application: Wine cellar barrel storage and handling - Quantity: 488 units Dimensions (Standard 225 L Barrel Support) Djdpfoyiamrex Ak Askw - Length: 1,430 mm - Width: 610 mm - Height: 364 mm

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1214, product width (max.): 250 mm, working width: 240 mm, product height (max.): 381 mm, sheet thickness aluminum (max.): 2 mm, roll width: 250 mm, roll diameter: 700 mm, year of last overhaul: 2023, type of input current: three-phase, inner diameter: 76 mm, film width: 250 mm, heating capacity: 5 kW (6.80 HP), overall weight: 7,883 kg, operating speed: 2,916 mm/s, total height: 1,970 mm, total length: 7,160 mm, total width: 1,920 mm, The Nilpeter FA2500 is a well-known narrow web flexographic printing press designed for high-quality label and flexible packaging production. Nilpeter is a globally recognized manufacturer with a long history of innovation in flexo printing technology, supplying reliable and efficient presses to converters worldwide. The FA series is particularly valued for its robust construction, printing accuracy, and versatility across a wide range of substrates. This Nilpeter FA2500 label press is configured with 8 colour flexographic printing units, allowing for complex and high-quality print jobs. With a maximum web width of 260 mm, the machine is well suited for label production where precision and consistent print quality are essential. Flexographic printing is widely used in the label industry due to its efficiency, fast setup times, and ability to print on various materials. Dkedjyf E Tfspfx Ak Ajw The press is equipped with electric and UV drying systems, supporting efficient ink curing and stable production speeds. UV drying is commonly used for achieving excellent print quality and durability, especially for demanding label applications. The combination of drying technologies provides flexibility in ink choices and production requirements. Additionally, this FA2500 includes 3 die cutting units, enabling inline converting and finishing. Die cutting is an important feature for label production, allowing printed material to be finished directly on the press, improving workflow efficiency and reducing the need for additional offline equipment. Overall, the Nilpeter FA2500 is a proven flexo label printing press, suitable for converters looking for a reliable solution for high-quality label production within the narrow web segment.

Condition: excellent (used), Year of construction: 2020, The Canon Arizona 1360 XT is a high-productivity, mid-volume UV LED flatbed printer designed for versatile large-format graphics. It features an extra-large (XT) table and 6 colour channels for expanded application possibilities. Colour configuration: CMYK+W+W (conversion of one channel to varnish possible without cost) Manufacturing year: 2020 Mileage: 25.000m² only! Print head status: perfect Print area: 3,08x2,50 meters Roll option: not available In production, demo possible Dkedpfxeylwhnj Ak Aow Location: Western Europe For further technical information please refer to enclosed brochure Key Specifications & Performance Media Size: Supports rigid substrates up to 2.50 x 3.08 meters (98.4 x 121.3 inches) and up to 50.8 mm (2.0 inches) thick. Print Speed: Reaches up to 52.8 m²/h in High-Key mode. Color Channels: 6 independent channels, typically configured as CMYK plus White or Varnish for high-value applications. Resolution: Uses VariaDot technology with variable drop sizes (6 to 42 picoliters) for near-photographic quality and sharp text down to 2 pt

Condition: new, functionality: fully functional, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, color: white, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, traction control, trailer coupling, truck registration, German new vehicle – from an official Peugeot partner! Boxer L2H2 panel van Air conditioning Bluetooth Rear parking sensors (acoustic warning) Reversing camera 3-seater Tow bar and much more. Dodpfx Aoyly Absk Aokw Feel free to contact us with any questions. We always have around 100 commercial vehicles in stock for immediate delivery! We are also happy to offer leasing or financing options. Price is for business customers only!

Condition: excellent (used), Year of construction: 2016, The Océ Arizona 2280 XT is an 8-channel UV flatbed printer with Océ VariaDot grayscale imaging technology, a maximum printing area of 49.2" x 98.4" (1.25 m x 2.50 m) on rigid media, a maximum media thickness of 2" (50.8 mm), and a speed of up to 691 ft²/hr (64 m²/hr) in express mode. It offers flexible media printing via an optional Roll Media Option (RMO), supports white ink and varnish, and can print 2-point text in its High Definition mode. Price includes decommissioning and loading on truck on original boxes (to be returned) Mileage: 60.000m² Manufacturing Year: 2016 Roll to roll option included Colour configuration: CMYK Lc Lm 2W (possible to convert one channel to varnish) Location: Western Europe RIP onyx included In production, demo possible Key Specifications Dedpfeyly Idsx Ak Aekw Model: Océ Arizona 2280 XT Ink System: 8-channel piezoelectric inkjet system using Océ VariaDot grayscale imaging technology Ink Technology: 6 to 42 picoliter droplets with two printheads per color Printing Modes: Near-photographic, High Definition, Production, and Quality modes Rigid Media Size: 49.2" x 98.4" (1.25 m x 2.50 m) Maximum Media Thickness: 2" (50.8 mm) Optional Roll Media Option (RMO): Available for flexible media printing Print Speeds (Express Mode): Up to 691 ft²/hr (64 m²/hr) Ink Options: Standard CMYK, Light Cyan, Light Magenta, White UV ink, and Clear Varnish Text Quality: Legible text as small as 2 pt. in High Definition mode Imaging Technology: Océ VariaDot grayscale imaging, enabling variable ink droplet sizes For further technical information please refer to enclosed brochure

Condition: used, mileage: 133,000 km, power: 132 kW (179.47 HP), first registration: 08/2009, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 11/2026, color: orange, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 7,200 mm, total width: 2,360 mm, total height: 3,670 mm, Year of construction: 2009, Equipment: ABS, soot filter, 1st owner. Perfectly maintained and consistently well-cared-for vehicle from a government agency. German truck, recently passed inspections with only a few operating hours. Valid DGUV (German accident prevention regulations) until 12/2026 and TÜV (German vehicle inspection) until 11/2026. Extensively inspected by a Ruthmann service technician in December 2025, shortly before its scheduled decommissioning, and declared "ready for use." In December 2025, a complete inspection was carried out, including lubrication, maintenance, and replacement of minor parts such as signs and membrane keypads. The vehicle was recently used for maintaining public lighting. A new vehicle has now been purchased. Until then, the aerial platform was in full operation. The TÜV inspection on the truck was renewed at 132,918 kilometers, with validity "without any apparent defects" until November 2026. Chassis: MAN TGL 8.180 with leaf spring suspension. Euro 4 engine. 6-speed manual transmission ZF Ecolite. Registered as a "self-propelled working machine, aerial platform." Unladen weight only 5835 kg. Therefore, a large payload reserve is available, and heavy materials can still be carried in the equipment compartments. Permissible total weight: 7490 kg. Wheelbase 3600 mm. Driver's seat, comfort version with air suspension. 3 seats in total. Yellow rotating beacons. Minor signs of wear from the years are present, but no significant damage. This is an excellent-running truck. All documentation from RUTHMANN is included in the original (operating manual with parts list, inspection book, all inspection reports from recent years). Working height approximately 13 m. Lateral reach 8.20 m. Basket load capacity: 200 kg (2 people plus materials). Basket size: 1300 mm long / 1000 mm wide / 1100 mm high. The basket is made of plastic. Dkodpfxsyrk A Se Ak Asw Insulation against 1000 volts. Compressed air blow-out gun in the basket. This offer is only valid for commercial enterprises or government agencies. Subject to prior sale and errors. The net price for this excellent Ruthmann aerial platform is 22,500 euros!

Condition: used, This listing is for a Shimadzu SIL-HT HPLC System Shimadzu SIL-HT Auto Sampler Shimadzu LC-10AD VP Shimadzu LC-10AD VP DGU-14A Degasser SPD-10AVP UV-VIS Detector This unit was previosuly being used with the CTO-20AC Column oven and the Applied Biosystems API 2000 It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Equipment can be serviced/renovated/refurbished on request at extra cost. Dksdpfx Akexzhn Aj Aow THIS IS ITEM DOES NOT COME WITH THE SHIMADZU CTO-20AC COLUMN OVEN

Condition: used, This listing is for a Enviro Systems UVIC-750 Dksdpjxzhu Asfx Ak Aew