Used Uv Dryer for sale (2,513)

Condition: excellent (used), For painting-finishing line (Ultra - Violet rays system) Max working width mm 1300 Total machine lenght: mm 4000 (ca.) Workpieces thickness (working height): mm 0 - 80 (ca.) Adjustable feeding speed: m/min 0 - 40 (ca.) PLC control panel (Touch Screen) Built-in electric and command panel Total installed power KW 54.9 Equipped with: No. 3 U.V. lamps Motorized feeding system by metal rods runned with two side-chains In-feed suction system (to take in the air) Gusdpfx Aegz Svgsihjh Out-feed suction system (to take away the solvent fumes)

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 16 Bar 3-60 degrees C Refrigerant R513A Gjdpfjyy U I Nsx Aihouh Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Gusdezw Apgopfx Aihoh Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Gujdpfszg Iw Iex Aihsh Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Due to the closure/relocation of the warehouse, the deadline for collection is October 22nd. Therefore, a great discount is offered! Mimaki JFX200-2513 UV-LED flatbed printer (model 2020). Professional UV-LED flatbed printer from the first owner – in top condition & serviced annually by a specialist company. For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from the first owner and has only been used in a professional environment. It was exclusively used for printing on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system was serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Godpjzt Dmrofx Aihouh Operating hours (Use Time): 19,409 h Printed output: Print Length: Only 3,023 m, Print Area is currently only 5142 m² UV lamps (LED): 2 UV-LED lamps (Note: Extremely durable UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (varnish) + White + White Your advantage: Thanks to the double white configuration, you achieve extremely high opacity and speed when printing under/over. The integrated primer and clear varnish enable smart finishing (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Accessories & highlights included: Includes a powerful suction fan (vacuum add-on): Even uneven or lightweight sheet materials are held perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is complete. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal by a specialist transport company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT, and only valid for collection by October 22nd, 2026! Errors and prior sale are reserved. This offer is exclusively aimed at commercial enterprises and freelancers.

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Godpfxjzf Ivuo Aihjuh Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: used, Scott AST Air Swept Tubular Dryer Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list. Gsdpfx Aezvgiusihjuh

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Gujdpfx Aieyr Aiwjhsh Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Year of construction: 2012, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 363/15862010, The rotary bed dryer WB-T (model 1.00 / 3.00) from Allgaier Process Technology GmbH is a specialized industrial plant for the continuous, uniform, and gentle drying of bulk materials and biomass. In process engineering, the model designation (1.00 / 3.00) typically refers to the dimensions of the drying area, i.e., a bed width of 1.00 meter and a bed length of 3.00 meters. Gusdpfx Aijz Rz Dneheh The heating capacity is 250 kW and is powered by electricity. Typical applications: • Biofuels & wood industry: Drying of wood chips, sawdust, and bark for pellet production. • Waste management • Agricultural & recycling industry: Processing of fermentation residues (from biogas plants), green waste, sugar beet pulp, or bagasse. Operating principle: The technology combines the process engineering advantages of a drum dryer with those of a fluidized bed dryer: • Rotary bed mechanism: The wet product lies inside on a perforated flow bed (perforated sheet). A targeted mechanical movement or tumbling in combination with the airflow creates a rotating or rolling product movement ("rotary bed"). • Counter-current or cross-current ventilation: The drying air is blown from below through the sieve bed and flows intensively through the tumbling product. This ensures an optimal heat and mass exchange. Main features & advantages: • Low-temperature drying: The plant is ideally designed for operation with waste heat or low-temperature heat sources (e.g., from combined heat and power plants/CHP or industrial residual energy). • Long residence time: This enables particularly gentle dewatering of the material while simultaneously ensuring high homogeneity of the residual moisture. • Robust particle processing: In contrast to pure fluidized beds, large, irregular, or sticky particles can also be processed economically. • Integrated screening: The flow effectively reduces fine dust and sand content during the process.

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Gsdpfx Aey R Tdwjiheuh

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM Gsdpfx Aiey Iplfehjuh 8.9 CFM / 4.21 lts/s Very little use Ex Pharma Facility

Condition: good (used), Year of construction: 2011, Refrigerant dryer, Kaeser, TE 91 – used: Gsdpez Sd Iysfx Aihsuh Price ex-works: €1,750 (net) plus dismantling costs, etc. Manufacturer: Kaeser Type: TE 91 Year of manufacture: 2011 Article number: 1.8008.50010 Serial number: 3027 Refrigerant: R134a Refrigerant charge: 1.950 kg Operating pressure: 18 bar, or 16 bar Max. operating pressure, air system: 16 bar 400V/3/50Hz Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry Gjdpfx Asq Igyvjihsuh - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 3342-01-2815, functionality: fully functional, power: 3.4 kW (4.62 HP), input voltage: 230 V, input frequency: 50 Hz, Compressed air dryer Manufacturer: FarragTech Type: CARD 110 S Year of manufacture: 2015 Power: 3.4 kW Gsdpfezaum Dex Aiheuh Two material handling devices Manufacturer: ICEVA Type: GS-4mD Year of manufacture: 2015 Power: 1200 W System in perfect condition, like new!!! PRICE REDUCED FROM 3550 TO 3250 EUR!

Condition: good (used), Year of construction: 2015, 1x Digicolor dryer, as shown in the pictures. Guedpfxez Inm Aj Aiheh

Condition: excellent (used), Year of construction: 2004, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from the premium manufacturer Ultrafilter (Donaldson). This system was specifically designed for applications that require absolutely high-purity compressed air – ideal for the operation of laser cutting systems, the pharmaceutical and food industries, or electronics manufacturing. The system removes moisture in a 5-stage process and also cleans the compressed air extremely efficiently from oil vapors, particles, and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Voltage supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ removal: Inlet max. 1000 ppm → Outlet max. 100 ppm - Container test overpressure: 20.8 bar - Year of manufacture: 2004 Dimensions (H x W x D): 2000 x 600 x 800 mm Gusdpfx Aozwl Rgsiheh We would be happy to offer you suitable bank financing for your project. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2022, functionality: fully functional, total length: 14,000 mm, total width: 2,500 mm, total height: 2,500 mm, overall weight: 5,000 kg, year of last overhaul: 2026, Equipment: documentation/manual, MAGNUM LABORA ROTARY DRYER + 750 kW FURNACE – CAPACITY up to 1 t/h For sale: a complete Magnum rotary dryer from Labora, along with a 750 kW furnace, designed for drying sawdust and biomass. Dryer capacity: up to 1 t/h of dry material, depending on the moisture content of the input material and the required final moisture content. The dryer is complete, installed, and operational. It is possible to view the equipment in operation on November 15th. After this date, it will be dismantled due to the installation of a larger dryer. The installation includes, among other things: - Magnum Labora rotary dryer, - 750 kW furnace, - raw material feeding and shredding system, - fan and exhaust and chimney system, - dust collection and steam extraction system, hot air discharge system, spraying system, - automation system with control cabinet, - temperature measurement and process monitoring, CO detection The installation is used for drying wood sawdust for pellet production. Sale includes the complete set, including the furnace and the raw material shredding mill. I can send a video of the equipment in operation via WhatsApp. Price: 350,000 PLN net Gedpfx Ajz Iq Rkoihjuh Location: West Pomeranian Voivodeship

Condition: excellent (used), Year of construction: 2002, Ultrafilter LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryers and CO₂ purifiers from the premium manufacturer Ultrafilter (Donaldson). This system was specifically developed for applications that require absolutely ultra-pure compressed air – ideal for operating laser cutting systems, the pharmaceutical and food industries, or electronics manufacturing. The system removes not only moisture in a 5-stage process but also cleans the compressed air extremely efficiently from oil vapors, particles, and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Voltage supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ removal: Inlet max. 1000 ppm → Outlet max. 100 ppm - Container test overpressure: 20.8 bar - Year of manufacture: 2002 Dimensions (H x W x D): 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. More items – new and used – can be found in our shop! International shipping costs on request! Gusdpfx Ajzwmacjihoh

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 800 kg, power: 19.5 kW (26.51 HP), tank capacity: 200 l, volume flow: 350 m³/h, Desiccant dryer with granular material silo and material separator Manufacturer: Piovan Type: DSN521NE No.: ODE 6242 4 insulated granular material silos, each with a capacity of 200 L With additional heating 3 material separators Manufacturer: Colortronic Guedpfxjx Na Ite Aihsh This system has been checked for all functions and is fully operational! PRICE REDUCTION FROM 6450 TO 6200 EUR!!!

Condition: used, functionality: unexamined, Digital color printer, Roland Versa UV LEF2-200 Gjdpfx Aiszv Sncoheuh Location: Bad Tölz Inspection is welcome. We have other used machines available. Please contact us.

Condition: excellent (used), Year of construction: 1998, Ultrafilter Laserpac LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ purifier from the premium manufacturer Ultrafilter (Donaldson). This system was specifically developed for applications that require absolutely ultra-pure compressed air – ideal for operating laser cutting systems, the pharmaceutical and food industries, or electronics manufacturing. The system removes not only moisture in a 5-stage process but also cleans the compressed air extremely efficiently from oil vapors, particles, and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Voltage supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow (at 5.5 bar g): Inlet approx. 36.3 m³/h | Outlet min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/ambient): max. 40°C - CO₂ removal: Inlet max. 1000 ppm → Outlet max. 100 ppm - Container test overpressure: 20.8 bar - Year of manufacture: 1998 Dimensions (H x W x D): 2000 x 600 x 800 mm We would be happy to offer you suitable bank financing for your project. Gujdpozwl Hzofx Aiheh More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2008, overall weight: 190 kg, hopper volume: 7 l, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Gjdpfsz N Igmsx Aihouh

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4608 1999, power: 5.6 kW (7.61 HP), volume flow: 200 m³/h, Desiccant air dryer Manufacturer: Motan Type: ADC 200/10/20 Connection value: 5.6 kW Gujdpfx Aieyvfibjheh Dry air volume: 200 m3/h 5 material silos Manufacturer: Motan Type: BC-30 Ltr. Additional heating: 1.55 kW 5 material conveying units Manufacturer: Motan Type: HLS-06-1-A000-0 PRICE REDUCTION FROM 5500 TO 5000 EUR!!!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Dryer: Gedsu Rcz Dopfx Aihjuh Manufacturer: Ryser GmbH, Switzerland Type: BAFAG ATU 35 Power: 3 kW Tested and fully functional!

Condition: used, Year of construction: 2015, input current: 70 A, input voltage: 400 V, We offer this used KBA GENIUS 52 UV offset printing press, year of construction 2015. Manufacturer: KBA Model: GENIUS 52 UV Identification number: MC4U00-000173 Current number: 178 Manufacturing year: 2015 Ingress protection rating: IP20 Voltage: 400/230 V Current: 70 A Apparent power: 48400 VA Frequency: 50 Hz Air pressure: 7.0 bar Gujdpfx Aijz D En Nshjh Air consumption: 1500 l/min Weight: 7250 kg If you have any questions or need more information, feel free to send us a message or give us a call.