Used Vdf Due Lathe for sale (8,357)

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 820 mm, spindle bore: 128 mm, turning diameter over bed slide: 515 mm, turning length: 2,000 mm, total length: 6,000 mm, total width: 1,900 mm, total height: 1,800 mm, spindle speed (max.): 1,400 rpm, Centre lathe VDF BOEHRINGER - DUE 800 MACH-ID 9760 Make: VDF BOEHRINGER Type: DUE 800 Year: 1989 3 Axis HeidenHain ND780 dro 3 chuck 400 mm 4 chuck 800 mm Steady rest closed ca 400 mm Steady rest C-Type ca 400 mm DBC Turning Length: 2000mm Swing over bed Ø: 820mm Swing over cross slide Ø:515mm Spindle bore: 128mm Spindle power: 30kW Bed width: 560mm Lhodpfx Ajzpwwpsncel Speeds / ranges: 1400Rpm Quill Ø: 125mm Workpiece load: 5000 Length: 6000mm Width: 1900mm Height: 1800mm Weight: 6700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1983, Boehringer DUE 500 lead and feed spindle lathe Condition: Used, geometrically overhauled in 2026 Year of manufacture: 1983 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked and adjusted. A test report according to DIN 8605 is available. During the work, the gib strips were also adjusted, and the coolant pump was overhauled. Technical data: Center height: 250 mm Ljdpjz A Tt Defx Ancohl Distance between centers: 1300 mm Spindle bore: 62 mm Chuck diameter: 300 mm Spindle speed: 2240 min-1 Motor power: 11 kW Space requirement approx.: 4000 x 1525 mm Weight approx.: 4300 kg Equipment: 3-axis digital display, NEW Coolant system Chuck guard with microswitch Emergency stop Roller guard Machine light Geometry report Inquiry item: Transportation costs will be provided in an individual offer.

Year of construction: 1997, condition: used, Specification Data Manufacturer VDF Boehringer Model VDF 250 Cm Year 1997 Serial No. 1114.3705-24 Machine type CNC turning center / CNC lathe Control Siemens Sinumerik 840C Design Slant-bed Tailstock No Swing over bed 550 mm Swing over cross slide 480 mm Maximum turning length 1,000 mm X-axis travel 405 mm Z-axis travel 1,099 mm Spindle bore 103 mm Spindle nose Size 8, DIN 55026 Lhsdezw D I Repfx Ancsl Front spindle bearing Ø 150 mm Maximum chuck Ø 315 mm Spindle power 53 kW (50% duty) Maximum spindle torque 780 Nm Spindle speed 30–3,000 rpm* Turret 12 positions Tool interface VDI 50, DIN 69880 Rapid traverse X/Z 10 m/min Maximum feed rate 10,000 mm/min Maximum feed force 15 kN Dimensions L × W × H approx. 5,400 × 3,200 × 2,400 mm Machine weight approx. 11,000 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Lhjdpjz Apc Refx Ancsl Machine weight: approx. 28,000 kg

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, turning diameter: 840 mm, feed length Z-axis: 6,000 mm, bed width: 560 mm, Turning diameter in gap: 1,040 mm, VDF Heidenreich & Harbeck Gildemeister M820x6000 Machine prfessionally refurbished, inspected and tested, very good working condition. Lhjdpfx Anjuq A Icocjl BASIC TECHNICAL PARAMETERS: Swing over bed: Ø 840 mm Swing over cross slide: Ø 520 Swing in the gap: Ø 1040 mm Length of gap: 390 mm Distance between centres: 6000 mm Width of bed: 560 mm EQUIPMENT INCLUDED INTO THE PRICE: Digital readout Sony for X and Z axis Central lubrication system for logitudinal support Safety guard on chuck, tool post and rear cover on support Ligtening, cooling pump and emergency stop button ADDITIONAL EQUIPMENT: Steady rest range 20-300 mm 4-jaw turning chuck Ø 800 mm Machine located in central Poland, ready for checking. Perfect condition.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Universal lathe with cycle control VDF Boehringer VDF 400 DUS Control system: Siemens Sinumerik 840 Year of manufacture: 2014 Internal machine no.: 57 Turning length: 1,000 mm Turning diameter over bed / cross slide: 420 / 235 mm Cross slide travel: 250 mm Max. speed: 10 – 3,000 rpm Ledpfx Ansy R Rl Ejcehl Accessories - Steady rest - Extraction unit - 3-jaw chuck Schunk 250-62 - Tool holder

Condition: excellent (used), Year of construction: 1985, Control: Philips B2T Swinging diameter: 640 mm Machining diameter, longitudinal: 550 mm Machining diameter on the turret: 450 mm Turning length: 1000 mm Lhsdpfjzpy Rrjx Ancol Spindle speed: 2,240 rpm Spindle bore: 103 mm 12-position turret, VDI 60 Chip conveyor

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 365 mm, spindle bore: 62 mm, turning length: 2,000 mm, turning diameter: 57 mm, swing diameter over cross slide: 365 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, bed width: 360 mm, total length: 5,000 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 1,600 kg, travel distance cross slide: 345 mm, overall weight: 5,000 kg, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, The VDF Boehringer DUS 560 Ti is, in terms of turning diameter, the most popular teach-in lathe from VDF Boehringer. With a standard chuck size of 315mm or larger, these machines offer optimal machining efficiency for single-piece and small batch production. Ljdpfxsyvuhzo Ancohl This machine is currently set up in our showroom and can be viewed on site! Comes as standard with: - Original documentation - Set of tool holders + drill chuck - Fixed steady rest - 3-jaw Forkardt 315-F Ø315mm chuck Weight & dimensions: - 5,500 kg - 5,000 x 2,100 x 2,000 mm (LxWxH) For all specifications of this machine, please see the last images!

Condition: used, Year of construction: 1996, turning diameter 250 mm Lhjdpfx Asyan R Aencel turning length 1000 mm Control Philips CNC-Steuerung weight of the machine ca. 8 t PHILIPS CNC control X-axis: 295 mm / Y-axis: 295 mm Center distance: 1000 mm Max. diameter on the bed: Ø 310 mm Max. diameter when turning: Ø 250 mm. Maximum turning speed: 4500 rpm. Spindle bore diameter: Ø 78 mm Turret with 8 tools Weight: approx. 8 tons

Condition: used, Year of construction: 2005, total length: 3,600 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti Year of manufacture: 2005 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this lathe from 2005, as well as a DUS 560 ti from 2004 with chip conveyor, and a DUS 400 ti from 2004. All three machines come from the same factory and were in use together until they were decommissioned in calendar week 34 of 2026. Ljdozwbxyjpfx Ancshl The purchase of all three machines is possible and will be offered with a discount. I also own several chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: used, Year of construction: 2004, total length: 4,200 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,500 kg, VDF DUS 560 ti With chip conveyor Year of manufacture: 2004 FORKARDT F+315 Previously used in the training department of a gear manufacturing plant. Was in production until approximately 3 months ago. I own this 2004 lathe with chip conveyor, as well as a DUS 560 ti from 2005 and a DUS 400 ti from 2004. All three machines originate from the same factory and were used together until they were decommissioned in calendar week 34 of 2026. The purchase of all three machines is possible and will be offered with a discount. I also have some collet chucks for the FORKARDT centering chucks. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Lodpfx Anezwbx Tscshl Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: ready for operation (used), Year of construction: 1971, functionality: limited functionality, turning length: 2,000 mm, turning diameter: 680 mm, Hello, I am selling a conventional lathe made by VDF. Maximum turning diameter: 680 mm Distance between centers: 2000 mm This machine is still very well suited for finishing operations, such as re-machining sealing surfaces, etc. Only the machine itself is being sold. Lhsdpfx Ajzwnproncel If you are interested, please do not hesitate to contact me!

Condition: good (used), We are offering an exceptionally good precision lathe. This machine is probably the best German-made lathe in its class ever built. BOHEHRINGER precision lathe, model DUE 630 Year of manufacture: 1991 Serial number: 1032.1239-08 Center height: 320 mm Swing diameter over bed: 640 mm Distance between centers: approx. 1,200 mm Effective turning length: approx. 1,000 mm Bar capacity: 82 mm Spindle head: DIN 55022, size 8 Drive power: 24 kW Max. torque: 2,000 Nm 24 speeds: 9 – 1,800 rpm Lsdpfezlm Ucox Ancehl 60 cross feed rates: 0.03 – 28 mm/rev 60 longitudinal feed rates: 0.06 – 56 mm/rev Footprint: L x W approx. 4,000 x 1,525 mm Weight: approx. 4,500 kg Accessories: - 3-axis digital display HEIDENHAIN - Parat tool holder including 4 holders - Coolant system - Chip guard back panel - 3-jaw chuck T 315 mm including jaws - Roller strip cover for lead screw support to the bed - Machine light - Operating manual - Wiring diagram - Rapid traverse in longitudinal and cross slides Condition: The machine has been completely technically inspected and can be inspected under power if desired. The gearbox runs very well. The bed guides are also in good condition.

Condition: used, Year of construction: 2004, total length: 3,400 mm, total width: 1,900 mm, total height: 2,200 mm, overall weight: 3,000 kg, VDF DUS 400 ti Year of manufacture: 2004 FORKARDT F+250 Previously used in the training department of a gear factory. Was in production until approximately 3 months ago. I own this lathe from 2004, as well as a DUS 560 ti from 2004 with a chip conveyor, and a DUS 560 ti from 2005. All three machines come from the same factory and were used together until they were dismantled in calendar week 34 of 2026. Lsdpozwbyqjfx Ancjhl The purchase of all three machines is possible and will be offered with a discount. I also have several chucks for the FORKARDT centering chuck. Please contact me to discuss the possibility of purchasing one or more lathes, as well as accessories. Loading is included in the price. Transport in a closed Eurotrailer can be arranged.

Condition: ready for operation (used), Year of construction: 1993, turning length: 1,900 mm, turning diameter: 700 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 25 rpm, rotational speed (min.): 25 rpm, rotational speed (max.): 4,000 rpm, total height: 2,520 mm, total length: 9,000 mm, total width: 4,100 mm, overall weight: 21,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, -Turning length: 1900 mm -Maximum workpiece diameter over the bed: 700 mm -Spindle head A11 DIN 55026 -Tool system: 2 x 12 pieces -Tool holders according to DIN 69880, diameter 50 mm Lhodpfxeztr N Is Ancsl -Automatic door sliding mechanism -Tailstock prepared for diameters of 80 mm - 262 mm -Pressure booster pump

Condition: used, total length: 3,350 mm, total width: 1,100 mm, total height: 1,500 mm, Colour: Blue Empty weight: 2.200 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Centre height [mm]: 240 - Swing over bed [mm]: 480 - Carriage turning diameter [mm]: 260 - Distance between centres [mm]: 1500 - Bed width [mm]: 370 - Spindle bore [mm]: 65 - Min. spindle speed [rpm]: 18 - Max. spindle speed [rpm]: 900 - Options: Removable bed, Quick-change tool post, Three-jaw chuck - Swing over removable bed [mm]: 740 - Transport dimensions: 3350mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 2200kg Ljdoy Nk N Uepfx Ancehl - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points Lhsdswwkx Eopfx Ancol  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: used, Year of construction: 1984, serial number 1113-23 turning length 500 mm Lsdpfx Aovxltujncohl turning diameter 220 mm chip conveyor ja kW Werkzeugwechsler 12-fach spindle turning speed range 5000 U/min tail stock automatisch

Condition: good (used), Year of construction: 1997, functionality: fully functional, Used CNC turning machine Manufacturer: Böhringer Type: VDF 250 Cm Year of manufacture: 1997 Ledpfx Aez Anv Noncohl with accessories.

Condition: good (used), Year of construction: 1976, functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 65 mm, turning diameter: 480 mm, turning length: 1,000 mm, total length: 3,400 mm, total width: 1,000 mm, total height: 1,500 mm, spindle speed (max.): 2,240 rpm, type of input current: AC, overall weight: 3,500 kg, For sale is an L+Z lathe manufactured by VDF Boehringer. The machine is in good condition and can be inspected and tested upon request. Manufacturer: VDF Boehringer Göppingen Type: D 480 Year of manufacture: 1976 Swinging diameter over bed: 480 mm Swinging diameter over cross slide: 280 mm Lhsdpfjzu I A Tox Ancol Turning length: 1000 mm Power feed Spindle bore: 65 mm Maximum speed: 2240 rpm Bed width: 310 mm Dimensions (L x W x H): 3400 x 1000 x 1500 mm Weight: approx. 3 tons Includes various Multifix tool holders and accessories. Free loading onto a truck.

Condition: used, Year of construction: 1982, Center height: 220 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Spindle mount: Lhsdpfx Aovzn Itencsl Tailstock taper: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Lhsdpfx Anoxq Eyuecol

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, •Revolver head overhauled in 2021 •High-pressure/high-flow KSS pump installed in 2021 •Draw tube renewed and spindle housing re-bearinged and lapped in 2022 •Prepared for automatic loading of parts using a robotic cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Turning diameter max. 550 mm Turning diameter max. 480 mm Turning length 1000 mm Spindle bore 78 mm Drive power (50%) 53 kW Speed range (1-stage) 30 – 4000 rpm Drum turret Number of positions 12, of which 6 are driven Cylinder shank 40 mm Speed range (2-stage) 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT/ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock controlled via program including various centering tips  Drum turret, 12 positions  Drive unit for turret Lhsdovr Tkzjpfx Ancsl  Chip conveyor  Coolant system with increased pump capacity, approx. 4 bar  Interface for automation  Various accessories  1 Heimbuch collet chuck SK 80, without collets  1 3-jaw chuck Schunk Rota NCF 315  1 3-jaw chuck Schunk Rota NCF 250  1 2-jaw chuck Schunk Rota NCF 250  1 Impact head WTO  2 driven tools CAPTO-axial tool  2 driven tools CAPTO-axial radial tool  3 driven tools CAPTO-radial tool  7 fixed tool holders  Mounting elements  Documentation

Condition: good (used), total width: 800 mm, total height: 1,500 mm, total length: 1,400 mm, steady rest CNC Lathe VDF Wohlenberg - U1270 MACH-ID 9187 Make: VDF Wohlenberg Type: U1270 Ledpjzcn Srefx Ancehl Length:1400mm Width:800mm Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, turning length: 3,000 mm, turning diameter over bed slide: 480 mm, controller model: Siemens 840D, TECHNICAL DETAILS Swinging diameter over bed: 520 mm Swinging diameter over carriage: 480 mm Turning length: 3,000 mm C-axis: yes C-axis speed range: 0–20 rpm Lhodpfxjzwmzte Ancol Number of tools: 12 Driven tools: 6 Spindle bore: 103 mm Main spindle head size: 8 MACHINE DETAILS Control system: Siemens 840D Main drive Main drive: 1-stage AC main drive Drive power: 53 kW Duty cycle: 50 % Speed range: 30–3,000 rpm EQUIPMENT Forkardt 3 NHF 315-82 A8 power chuck with centrifugal force compensation and hard, ground-in top jaws Outer diameter of power chuck: 315 mm Bore diameter of power chuck: 82 mm Maximum bar diameter: 63 mm Including draw tube and mounting for power chuck