Used Vertical Internal Grinder for sale (15,898)

Condition: not inspected (used), Type: DO 25 - 0.55 kW - 2,800 rpm Dcodpfx Apjza Dk Ejvsk - 220/380 V

Condition: used, Year of construction: 2011, Technical details: x-travel: 660 mm y-travel: 355 mm z-travel: 500 mm Dedpszq S D Tjfx Apvjck total power requirement: 19 kW weight of the machine ca.: 4,1 t

Condition: used, Year of construction: 2016, operating hours: 24,000 h, functionality: unexamined, machine/vehicle number: 466, Wenzler VKM 1-1 CNC Vertical 5-Axis Machining Center Description Type: CNC Vertical 5-Axis Machining Center Manufacturer: Wenzler Dodpezrv Dgofx Apveck Model: VKM 1-1 Year of Construction: 2016 Serial Number: 466 Condition: Used Quantity: 1 HS Code: 84571090 Item Description The lot includes: One CNC Vertical 5-Axis Machining Center and accessories Technical Data Machine History and Condition The machine was used as a demonstration machine from 2016 to 2022. From 2022, it was used in production at HAL Automotive Plauen GmbH for machining axle carriers. Before being put into operation in production, the machine was overhauled and upgraded. A new milling spindle was acquired in December 2024. The spindle has a running time of approximately 500 operating hours. Operating hours: approx. 24,000 hours Working Area X-axis: 1,500 mm Y-axis: 1,250 mm Z-axis: 880 mm Feed Rate / Rapid Traverse X-axis: 100 m/min Y-axis: 100 m/min Z-axis: 100 m/min Axis Acceleration X-axis: 7 m/s² Y-axis: 7 m/s² Z-axis: 10 m/s² Jerk: 150 m/s³ Table Load Maximum Workpiece Weight: 400 kg Spindle Tool Interface: HSK 100 Maximum Spindle Speed: 10,000 rpm Power, S6 / 40% Duty Cycle: 40 kW Maximum Torque: 175 Nm Tool Magazine Number of Positions: 36 Maximum Tool Length: 520 mm Maximum Tool Diameter with Empty Adjacent Position: 205 mm Maximum Tool Weight: 20 kg Maximum Total Magazine Load: 200 kg Tool Change Time: 3 seconds Equipment Included in the Scope of Supply Chip Conveyor Cooling Unit Cooling Unit Manufacturer: Lahntechnik GmbH Model: KESY 280-01 Serial Number: 2017-05981 Year of Construction: 2017 Rated Power: 13.6 kW Rated Voltage: 400 V / 3~ / PE / 50 Hz Control Voltage: 24 V DC Protection Class: IP54 Refrigerant: R410A – 10.03 t CO₂ equivalent Maximum Operating Pressure: 30 bar HD / 19 bar ND Dry Weight: 400 kg Country of Origin: Germany Not Included in the Scope of Supply The machine or the economic asset does not include product-specific tools, fixtures or robot grippers. Operational Status and Inspection The machine was taken out of production in October 2025 due to the factory closure. The machine is still connected to the power supply and can be inspected in this condition. However, a test run is not possible as no machine operator is available. Please view the videos recorded by the machine in December 2025. Transport and Loading No special transport securing is required. Special lifting and transport equipment from Wenzler is required for loading and unloading. The buyer must rent this equipment directly from Wenzler / Heller Group. After lifting and unloading, the buyer is responsible for returning the equipment to Wenzler.

Condition: good (used), Year of construction: 1990, functionality: unexamined, total height: 3,000 mm, total length: 5,400 mm, total width: 2,900 mm, overall weight: 8,600 kg, For sale from our Bremen location. Manufacturer: Model: AJV25/404 Mazak with 2 worktables and 3 machine vices, as well as accessories, including 1 T-slot worktable, 1 additional machine vice, 1 chip conveyor, and 1 tool changer, with 30 tools. Year of manufacture: 1990 Technical data: X-axis travel: 1000 mm Y-axis travel: 508 mm Z-axis travel: 460 mm Rapid traverse rate: X/Y-axis: 24 m/min Z-axis: 18 m/min Control system: Mazatrol M-32 Table length (clamping surface): 550 x 1240 mm Table width: 410 mm Workpiece weight: 300 kg Tool changer: 40 Dcedpfxszq Hw Uo Apvjk Spindle taper: CAT 40 Max. working spindle torque: 263 Nm Max. spindle speed: 28 – 4000 rpm Spindle motor power: 15 kW Length x Width x Height: 5400.0 x 2900.0 x 3000.0 Weight: 8600 kg

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Sale from Bremen location. Manufacturer: Mazak with chip conveyor and accessories Type: VQC-15/40 Year of manufacture: 1985 Technical data: X-axis travel: 560mm Y-axis travel: 410mm Z-axis travel: 380mm Control system: Mazatrol CAM M-2 Table length: 900mm Table width: 410mm Workpiece weight: 300kg Tool changer: 30 Spindle taper: CAT 40 Max. spindle speed: 6000rpm Spindle motor power: 7.5KW Length x Width x Height: 2300.0 x 2400.0 x 2480.0 Weight: 4750 Kg Dcedpfx Aezq Hwnjpvsk

Condition: used, Year of construction: 2021, Manufacturer: Kolbe Model: MW52-120 Year: 2021 Condition: Used Serial Number: 128 0461 Stock Number: 3418 Hole plate diameter: Enterprise, E52, 130mm Capacity max: 2000 kg/h Hopper: 120 litre Power: 3 x 400V, 8.6kW Dcjdpfxjzqr Sqs Apvek Dimensions: 1550 x 950 x 1500 mm Weight: 560 kg With single mixer in the hopper and safety cover over head

Condition: excellent (used), Year of construction: 1996, CNC machining center MORI SEIKI MV-40B/40 Year of manufacture: 1996 X-axis: 800 mm Dcodew Ebtcjpfx Apvok Y-axis: 410 mm Z-axis: 510 mm Spindle speed: 8,000 RPM Workpiece Workpiece weight: 700 kg Table External length: 1,100 mm External width: 450 mm

Condition: used, Year of construction: 2015, travel -x axis 762 mm Dcedpfxezq Hkbe Apvek travel -y axis 530 mm travel -z axis 560 mm control Siemens Sinumerik 828D max. Spindle speed 10.000 U/min. table-size 900 x 500 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | QUASER - MV 154 C-10B equipped with 30-way tool changer and chip conveyor. The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MV-154 | MV154 | MV 154 C 10B | MV154C

Condition: used, Year of construction: 2021, travel -x axis 712 mm travel -y axis 508 mm travel -z axis 515 mm B-axis ° C-axis 360 ° control Siemens Sinumerik 828D max. Spindle speed 12.000 U/min. rotary table dia. 410 mm max. swing diameter 500 mm max. table load 200 kg tool taper BT40 5-axis machining center | QUASER - UX 500 equipped with ITC, tool changer and chip conveyor. The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dcjdpfx Apezq Hi Rjvek #Tags: UX-500 | UX500

Condition: used, Year of construction: 2013, travel -x axis 762 mm travel -y axis 530 mm travel -z axis 560 mm control Siemens Sinumerik 828D max. Spindle speed 10.000 U/min. table-size 900 x 500 mm numbers of positions in the tool changer 30 Dcedpezq Hi Dofx Apvsk Milling machining centers - vertical | QUASER - MV 154 C-10B equipped with 30-way tool changer and chip conveyor. The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MV-154 | MV154 | MV 154 C 10B | MV154C

Condition: used, Year of construction: 2003, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Mori Seiki Machining Center Model NV5000A/40 Year 2003 Chip Conveyor ✅ Spindle ✅ Dodpfx Aezqbm Dspvjck Table ✅ Without Ball Screw ❌ Without CNC Drives ❌ The machine is missing the ball screw and the CNC drives; other than that, the spindle and table are present; the machine is otherwise complete.

Condition: used, Year of construction: 2007, x-travel 600 mm y-travel 450 mm z-travel 450 mm Control Heidenhain The machine is used and untested. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale! Dcedpfxszq Hl Eo Apvok

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dcjdpfjzq Hlrox Apvok Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Heidenhain TNC 355 Dcedpfx Apszq Hllovsk In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog 11 turning speed range - main spindle 40 - 4000 min/-1 tool taper SK 40 swivellable +/- 90 ° quill stroke 80 mm In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Accessories: - Cabin Dcedezq Hlfopfx Apvsk Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: used, x-travel 560 mm y-travel 500 mm z-travel 410 mm Control Deckel Dialog 11 In our opinion, the machine is in good used condition and can be inspected Dcedpfx Apozq Hk Uevjk under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2008, x-travel 700 mm y-travel 420 mm z-travel 610 mm Control Heidenhain output 22 kVA weight ca. 5.200 kg Dedpfx Aszq Hkhspvock In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Erowa automation Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 2010, Striebig Panel Saw Compact 5220, Year of Manufacture 2010 Robust, self-supporting, firmly welded, and torsion-resistant saw frame Stable, durable saw beam steel construction Robust bearing of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.9 kW motor (5.3 HP) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; Hvertical: 2200 mm, Hhorizontal: 2100 mm Equipment: - Compact 5220 - Strip fence - Mechanically braked support rollers - Freestanding support complete Location: Available from stock in 54634 Bitburg Dcjdpfx Apezhx A Rsvek - immediately available -

Condition: good (used), Year of construction: 2008, Working hours: - Power on: 44113 - Spindle hours: 13284 Dedpfszquqiex Apvsck Equipped with: * CNC control SIEMENS 810 D powerline * 20-station ATC * Coolant equipment * Chip conveyor x-travel 1035 mm y-travel 560 mm z-travel 510 mm table surface area 1200 x 560 mm table load 1000 kg tool taper SK 40 spindle turning speed - stepless 20 - 8000 rpm feeds longditudinal/cross/vertical - 20000 mm/min rapid traverse 25 m/min spindle drive motor 13 kW dimensions of machine 2,6 x 2,6 x 2,7 m weight of the machine approx. 4,1 t

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Machining Center 3-Axis X, Y, Z Mori Seiki Dcjdpfxozp E E Ij Apvsk Model MV-653/50 Year 1999 CNC Fanuc MSG-803 Phase 3

Condition: used, Year of construction: 2016, Technical details: Dedpfx Ajzq Aw Rjpvjck turning diameter: 150 mm

Condition: used, Year of construction: 2016, Technical details: turning diameter: 150 mm Dcedpfjzq Aw Dsx Apvjk

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm Dedozh H I Ispfx Apvock - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: used, Jones & Shipman 540 Surface Grinder (6" x 18"), 460 x 150mm Magnetic Chuck, Power Rise & Fall Wheel Head. S/No. 1682/78 Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dcodpfxszr I Dle Apvok

Condition: used, Year of construction: 1997, Mazak VTC-20B M+ Vertical CNC Machining Centre with Mazatrol M Plus CNC Control, Table Size 1460mm x 510mm, 20 Tool ATC, CAT 40 Spindle Taper, Spindle Speed Max 10,000rpm, Travels X = 1040mm, Y = 510mm, Z = 640mm, Table Load 500kg, Machine Weight 5850kg. S/No. 125075 (1997) Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Dcedjzr Iymepfx Apvok