Used Wall Scales for sale (8,043)

Condition: excellent (used), Year of construction: 2021, Now there is a rare opportunity to invest in a used AutoStore system delivered by Swisslog. The system was installed in 2021 and is available for immediate sale. The system is located in the USA and offers a quick path to upgrading your automation without the long lead times and high investment costs associated with a new installation. This AutoStore is equipped with a total of 22 Red-line robots, resulting in a very high robot density. This creates incredibly high output with high capacity. Don't miss out! 23 robots – high throughput from the start Ready for sale now – avoid long delivery times Cost-effective investment – fast ROI The availability of used AutoStore systems is very limited, making this a unique opportunity for companies that want to scale up quickly. The system is ready to be dismantled, moved, and put into operation in a new facility immediately. Fpedpfx Aezbhchsl Ujn Model year: 2021 Machine length: 16,300 mm Machine width: 15,250 mm Machine height: 4,880 mm Grid type: Double-double Number of robots: 23 Number of ports: 8 Port type: 2 Relay Ports + 6 Conveyor Ports Number of bins: 4100 Bin height: 330 mm Bin width: 400 mm Bin depth: 600 mm

Condition: new, maximum load weight: 32,406 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,660 mm, loading space volume: 28 m³, total height: 3,600 mm, Year of construction: 2026, Tipping semi-trailer Schmitz Cargobull SKI 24 SL 7.2 with 28.2 m³ volume + Cramaro electric tarp and LED rear lights. First registration: unregistered New vehicle Mileage: 500 km Color: Light gray Technical data Tires: 385/65R22.5 * Body length i.L.: approx. 7480 mm * Body width i.L.: approx. 2354 mm * Side wall height: approx. 1660 mm * Payload (permitted/technical): 29406/32406 kg * Tare weight: 6594 kg * Condition: New vehicle Equipment Electric tarp Cramaro + remote control * Side wall in 4 mm steel * Rear wall with 1 pair of additional tensioning closures * Automatic, mechanical 2-hook locking system * SR tipper body floor 7.2 in 5 mm steel * Aluminum ladder 3000 mm long with bracket on the side member * Support winch, manufacturer: Jost * EBS electronic braking system with RSP * Automatic lowering during tipping * Lift axle, automatic/pneumatic, electric start assist * Air suspension * Hydraulic cylinder 170-250 bar, manufacturer: Hyva, suitable for low and high-pressure operation * Disc brakes * LED rear lights * Loading pressure gauge Technical specifications Tires: 385/65R22.5 * Length: 7480 mm * Width: 2354 mm * Side walls: 1660 mm * Net load / technical load: 29406 kg / 32406 kg * Tare weight: 6594 kg Equipment Electrical tarp Cramaro with remote control * Side walls: 4 mm steel * Rear wall: toggle closures with rubber seals * Bottom: 5 mm steel * Aluminum ladder: 3000 mm * EBS electronic braking system with RSP * Automatic lowering during tipping * Trailing axle Fsdpfx Ajy Aqzwol Ujpn * Disc brakes * Air suspension * Hydraulic cylinder 170-250 bar, Hyva, for operation in high and low pressure * Rear lights: LED * Charging scale display Non-binding offer, ex works Cologne. Subject to prior sale and errors. Sale to businesses only. We speak German - We speak English - Hablamos español - Nous parlons français - Мы говорим по-русски - 我们说中文

Condition: good (used), Year of construction: 2014, functionality: fully functional, ELCON Automatic Multiwall Sheet Cutting Machine LANCET 215 For vertical and horizontal cutting of multiwall sheets with a rigid blade! Technical Specifications: Fedsyymhuopfx Al Uepn Cutting Height: 2,150 mm Cutting Length: 7,300 mm Cutting Depth: 50 mm Required Air Pressure: 6 bar Dimension setting for horizontal cuts: electronically adjustable via touchscreen Dimension setting for vertical cuts: via scale from 0–1,300 mm Feed rate: continuously adjustable from 0 to 60 m/min. Features: Solid, enclosed rear wall with felt support (new) Aluminum material support table Right-hand, pneumatically retractable material stop Pressure device for vertical cuts with adjustable pressure Lower pneumatic sheet clamping device per meter of cutting length Pneumatically retractable blade Pneumatically swiveling blade

Condition: new, maximum load weight: 11,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,500 mm, total height: 3,330 mm, Year of construction: 2025, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ KROLL Suction-Pressure Tank Trailer ADR (internal no. #518) Type K 14.0/36 PEAH --- Tank code L4BH Suitable for the collection and transport of liquids and sludges. Total capacity approx. 14,000 liters (air volume) Sludge chamber (behind piston) approx. 12,000 liters (air volume) Tank material: S355J2G3 Shell wall thickness: 7 mm Flange pair "LONG LIFE" Closure bottom can be opened by 2 hydraulic cylinders Closure bottom locking with tension claws, hammer head bolts and galvanized linkage Pneumatic lid locking Tank level indicator via internal float and external display scale Discharge apron made of aluminum Discharge by free flow and via piston Piping and fittings in DN100 Suction line DN100 Operator station rear right Chassis 9t BPW axles, air suspension with lift and lower valve for each axle Ball-bearing slewing ring and certified long drawbar Tires 4x 385/65R 22.5 Michelin Plastic mudguards Rear impact protection Side underrun protection 2 wheel chocks Dual-line air brake system with WABCO EBS, ABS, and TSS Hose lockers left and right on superstructure Toolbox LED work lights LED beacon lights 4x LED area lights Advertising panels left and right, 3000 x 650 mm For further details and/or pictures, please contact us directly. You will find a wide selection of other vehicles for SALE or RENT at: Fpjdpsxc S Aasfx Al Usn Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively in accordance with our terms and conditions and excludes any warranty.

Condition: like new (used), GIF Kitchen Ventilation Ceiling Ventilation Ceiling System The optimal solution for kitchen ventilation, commercial kitchens, and the food industry. The best alternative to extractor hoods GIF kitchen ventilation ceilings are installed in: • Company canteens • Hospitals, clinics • Restaurants / hotels • Retirement homes, homes for the disabled, and children • Military accommodations, field kitchens • University cafeterias, school kitchens • In-flight catering • Correctional facilities • Public facilities Patented quality – Made in Germany The GIF kitchen ventilation ceiling is a complete, wall-to-wall, surface-active solution including large-area exhaust and supply air panels, lighting, and compensation surfaces with an installation height of just 200 mm. The use of the ceiling cavity as a pressure chamber in accordance with VDI 2052 enables implementation as an "open" or "closed" system, always maintaining the largest possible proportion of air-active surfaces. The large-scale capture of frying, cooking, and other fumes, as well as the large-scale, low-turbulence supply air intake, guarantee a comfortable climate free from condensation and drafts. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. On the supply air side, the GIF active cassette ceiling is used for low-turbulence, large-scale supply air intake according to the stratified flow principle. An energy-efficient solution is thus standard. The special design ensures indirect supply air guidance, even for high air volumes at low inlet velocities, without an induction pulse. Since the active cassettes are identical in the exhaust and supply air areas, they can be interchanged at will. Facts and Benefits Complies with or exceeds current guidelines (VDI 2052, VDI 6022, EN 16282), including accessibility to underlying components (no access openings required). Durability of the material: CNS 1.4301 Integrated deflection system for rapid pulse reduction Economical and hygienic cleaning of only 4 parts per m² in the dishwasher Pulling and pushing of the active cassettes in the support profiles makes them easy for anyone to remove without tools Partial cleaning possible as needed No need to climb onto greasy, hot kitchen appliances (risk of slipping) HACCP-certified process Technical Specifications Exhaust Air Fjdpfet Hglkox Al Uepn Air flow rate: 260-300 m³/h m² Separation efficiency: up to 97% Dimensions: 500×485 mm Pressure drop: 20-25 Pa Material/Surface: CNS Material No. 1.4301 Weight per m2 without support structure: 10.00 kg Draft air flow: 360-500 m3/h m2 Dimensions: 500×485 mm Pressure drop: 25-30 Pa Material/Surface: CNS material No. 1.4301 Weight per m2 without support structure 10.00 kg Airflow velocities: less than 0.2 m/s Ceiling area: 6500 x 3000 mm 19.50 m² 300 supply air flat ceilings, 250 x 485 mm 200 supply air flat ceilings with sound absorption, 250 x 485 mm 220 active cassette ceilings, 500 x 485 mm 14 system support profiles, 6500 mm 7 system support profiles, 2000 mm Lighting fixtures installed flush with the ceiling in the GIF ventilated ceiling Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 850 mm, total length: 3,000 mm, total width: 1,500 mm, table height: 850 mm, table width: 1,500 mm, overall weight: 800 kg, height adjustment type: mechanical, Welcome, The welding table manufacturer, ATRIBU, offers a new welding table designed for both professional industrial environments and demanding hobbyist workshops. Short Description: DIMENSIONS: Fpjdsy Atrxepfx Al Ujn Tabletop: 3000 x 1500 mm with 200 mm high side walls. Both tabletop and side walls are 15.0 mm thick. HOLE SYSTEM: Precision-milled and chamfered holes, System 28 mm, 100 x 100 mm grid, with engraved scale/grid. MATERIAL: S355 J2+N Steel (high-strength structural steel). REINFORCEMENTS: Internal ribbing (160 x 6 mm plates) spaced every 40 cm for maximum stability. TOLERANCES: Maximum deviation of 0.5 mm per meter length. Maximum angular deviation of 0.5°. LEGS: 80 x 80 x 3 mm profiles, bolted, height-adjustable with swivel feet. Height adjustment range: 85–90 cm. PRICE: The price includes the table with standard metal-profile legs (wheels are not included in the base price). Swivel castors in various load capacities are available as an option for an additional fee. Full VAT invoices are issued. Detailed Description: Our tables are manufactured from high-grade S355 J2+N steel. The use of harder structural steel significantly reduces premature hole wear and ensures maximum structural durability. All holes are precision-milled and chamfered for optimal fit and tooling quality. Side walls are also made of S355 steel and feature a double row of holes. Table flatness remains within a maximum tolerance of 0.5 mm per meter. For tables of this size, we typically achieve a flatness of 0.2 mm per meter, ensuring near-perfect surfaces. The tabletop is protected with a mill scale layer for initial corrosion resistance. Additionally, each table is treated with a professional anti-spatter agent with a corrosion inhibitor prior to shipment. [Our welding tables are not plasma nitrided.] Robust internal ribbing provides necessary rigidity, even when welding heavy or complex assemblies. We also supply a full range of professional tools and accessories. Shipping: Affordable shipping across Europe is available (approx. 50–300 EUR depending on table dimensions). VAT Information: For private customers: Local VAT rates apply. Intra-community supply (B2B): With a valid EU VAT number, purchase at 0% VAT is possible. Custom Orders & Other Systems: Need a different size or thickness? We are happy to design and manufacture a customized solution for your requirements. Available Systems & Specifications: Hole Systems: System 28 / System 16 Tabletop Thicknesses: 8.0 mm / 12.0 mm / 15.0 mm Standard Sizes: 1200 x 800 mm 1200 x 1200 mm 1800 x 800 mm 2000 x 1000 mm 2400 x 1200 mm 3000 x 1500 mm Options: Wheels with 300 kg or 100 kg load capacity, HEX grid (additional holes), 50 x 50 mm grid. Available Accessories: Table extensions, towers, clamps, squares, bolts, accessory organizers, and more. Note: Welding tables are supplied without accessories. Please consult our catalog to select your tooling set. How to Order / Contact Us: Inquiry: Please send us an email with your requirements (size, thickness, etc.). We highly recommend requesting our comprehensive catalog, as selecting the right accessory set is essential for efficient work. Order: Once you’ve finalized your configuration, orders can be placed via email. We look forward to hearing from you! We welcome both long-term cooperation and single orders. Best regards, Team ATRIBU

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6 kg, maximum load weight: 28 kg, overall weight: 35 kg, axle configuration: 3 axles, loading space length: 15,030 mm, loading space width: 2,480 mm, loading space height: 4,060 mm, total length: 15,150 mm, total width: 2,550 mm, total height: 4,060 mm, suspension: air, tire size: 435/50R19,5, tire condition: 100 %, Additional information Chassis, semi-trailer, transport company Fine-grained steel welded construction, with preload for slight tension in the neck area, kingpin plate with interchangeable 2 kingpins X-tra Long, with an internal length of 15030 mm Outer frame slightly angled, new design with Load-Lock profile for attaching lashing straps 24-ton, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Note: Free support foot angle or free swivel radius to the rear approx. 1930 mm Fpsdpoi Riwusfx Al Uon Retractable ladder at the rear Door lock on the side 2 chocks with holder Aluminum side impact protection Galvanized steel under-ride protection Partial wheel arches in front of the 1st axle and behind each axle Rear impact protection Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The semi-trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle driving stability system AAC Basic, automatic lift axle acting on the last axle, as an aid for maneuvering, up to 20 km/h, can be manually switched off Axle load detection via EBS-Canbus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels & Tires 435/50R19.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal, flashing Side marker lights 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Sieved plywood, approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / Corner posts at the front 2580 mm high, corner posts steel in full volume design, release mechanism for side tarpaulin on the front wall, crash blocker, at the bottom inside at approx. 140 mm height with steel impact protection Center posts 3 pairs of sliding posts that can be moved along the entire length, with 4-fold insert pockets & at the bottom with a long pocket. 3 pairs of post positions Insert slats 5 rows of wooden slats Rear wall / Corner posts at the rear Corner posts at the rear steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal swivel latch locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Sliding roof, rear end lift that can be folded up, with roof that can be slid from back to front, L-roof beam for the automotive industry, interior width between the roof beams approx. 2490 mm, tarpaulin color: white Roof non-elastic, hardly any deflection of the roof beam during loading and unloading EcoLift - liftable roof by approx. 380 mm, on both sides, with gas spring support, 3 driving positions at the front: Interior height at the front set to approx. 3000 mm Optimal rain gutter at the rear, at the top of the end ra

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,680 kg, maximum load weight: 35,320 kg, overall weight: 50,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,520 mm, loading space height: 600 mm, total length: 15,400 mm, total width: 2,550 mm, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Folding rear support 2x chock blocks with holder Aluminum side impact protection Quarter panel fenders in front of and behind the axle assembly with splash flaps behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted crosswise at the front on the floor of the gooseneck, with 2 storage trays Extendable widening elements up to 3,000 mm (not in rear slope)(However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on the gooseneck, at the front, crosswise Wooden planks 70 mm for widening to 3,000 mm Excavator arm recess starting above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Tie-down points: Low-loader 3 pairs of tie-down points, each 10 tons, at the front of the gooseneck, 8 pairs of tie-down points, each 10 tons, in the low bed, 3 pairs of tie-down rails in the wheel track area of the low bed, 3 pairs of tie-down points, each 10 tons, in the axle/rear area Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption with steering axle Air suspension Wheels and tires 235 / 75 R 17.5 as chosen by the manufacturer Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, without connecting line with lift & lower valve, hold function in the lowered position + auto-reset function Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Vehicle - Driving stability system Trailer Info Center, for displaying vehicle data such as axle loads (no calibrated scale), mileage and diagnostic/system messages Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1x additional LED work light at the rear Fodpfx Aoi Ri Hgjl Ujpn 1x LED rotating beacon with holder, switched via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel/diamond plate covering in the wheel track area with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering, low bed on the left and right in the wheel track area can be hydraulically raised for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Low bed length approx. 6,300 mm Side walls 25 mm aluminum hollow profile, 400 mm high, can be plugged into the front and side on the gooseneck Ramps Steel ramps 2,800 mm long, 750 mm wide Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown i

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 12,800 kg, maximum load weight: 44,200 kg, overall weight: 57,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to customer specifications. Chassis, Low-bed Semi-trailer Steel welded construction, drawbar plate with interchangeable 2 kingpin and 2 kingpin positions 24 tons, 2-speed landing gear, one-sided operation Foldable rear support 2 chock blocks with holder Aluminum side guard 1 plastic toolbox, with insert tray, w=620/h=360/d=440 mm, lockable with a padlock Fedpfx Alsi Ri Hnj Uspn Extendable widening sections to 3,000 mm Storage compartment for timber planks on gooseneck, transverse at the front Timber planks 70 mm for widening to 3,000 mm Telescoping Central tube frame in cleanly welded, interlocking telescoping frame sections. Extendable by a maximum of 6,000 mm and lockable approximately every 1,000 mm Locking with mechanical pin lock With sliding platform Tie-down eyes, low-bed 2 pairs of ring-type tie-down eyes, each 5 tons, at the front on the gooseneck; 11 pairs of tie-down loops embedded at the top and side in the outer frame, each 10 tons; 2 on the gooseneck, 9 distributed in the low-bed area; first tie-down eye 250 mm from the front and last at most 250 mm from the rear, spacing of tie-down eyes not greater than 1,100 mm 8 pairs of socket pockets embedded in the outer frame, inner dimensions 70 x 40 mm, (can be converted to 5-ton ring-type tie-down eyes, not included in the scope of supply) 3 pairs of folding tie-down eyes additionally embedded in the low-bed area, each 10 tons; 1 at the front of the low-bed, 1 in front of the 1st axle, and 1 behind the 3rd axle Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last 2 axles steerable, with automatic reverse locking via reversing light and manual locking function via a button on the vehicle Air suspension with lift and lower valve Wheels and Tires 235 / 75 R 17.5, manufacturer Fulda Steel rims in twin configuration, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab; truck must be appropriately prepared; no truck installation (no calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED revolving beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED-lit and extendable to 3,000 mm 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / chequered plate surface Storage box embedded in the ramp to the gooseneck Then with 70 mm soft wood floor, steel/chequered plate surface in the wheel arch area Rear slope with 70 mm soft wood floor Side Walls 25 mm aluminum hollow profile, 400 mm high, at the front and side on the gooseneck, pluggable Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally movable Covered with wood Hydraulically operated via tractor PTO with flow control Hydraulic connection with SVK coupling NW 10/3, without connect

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Fpodpfjwcfgbex Al Uon Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 Fpsdexr Am Ujpfx Al Uen KO - SPECIAL 27.000 x 18.000 x 9.000

Condition: new, Year of construction: 2025, We are an official Sunward dealer for Berlin, the state of Brandenburg, and Eastern Saxony. Visit us and be impressed by our wide range and outstanding quality. We always have approximately 20 excavators in stock. Micro Excavator Sunward SWE08B New machine Operating weight: approx. 1 ton, with grading bucket 1.1 tons (measured on scale) Hydraulic pilot control - joystick operation Yanmar 2-cylinder diesel engine – 2TNV70-PSU Power: 7.2 kW / 2400 rpm Fuel level indicator Hour meter Telescopic undercarriage, width adjustable from 74 to 98 cm 2 travel speeds Swing boom (enables work directly alongside walls and hedges) LED work light Auxiliary hydraulics (for breaker and swivel bucket) Fpjdpfx Aoyq A R Eel Uen 5-year warranty Options: MS01 mechanical quick coupler 30 cm digging bucket 50 cm digging bucket 60 cm digging bucket 80 cm fixed grading bucket 80 cm hydraulic grading bucket Matching trailers also in stock. All information subject to change without notice. Inspection possible at any time by appointment. We accept trade-ins of your old machine. For inquiries, please include your complete address and email address! We are your Sunward dealer for the following regions: District of Wittenberg, District of Nordsachsen, District of Leipzig, City of Leipzig, District of Elbe-Elster, District of Oberspreewald-Lausitz, City of Cottbus, District of Spree-Neiße, District of Oberhavel, District of Barnim, District of Märkisch-Oderland, City of Frankfurt Oder, District of Oder-Spree, District of Dahme-Spreewald, District of Teltow-Fläming, District of Potsdam-Mittelmark, City of Potsdam, City of Brandenburg, District of Havelland, City of Berlin.

Condition: ready for operation (used), Heidenhain LS 703 ML 620 mm ID: 216 750 0C linear scale SN: 2302669 - cable length: 2 m, used, in good condition, 100% functional, delivery as per photos. Fodpfxsx Er Hgo Al Uspn

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 8,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loaded loading height approx. 940 mm, 20 x lashing eyes each 6 t, 20 x lashing brackets each 6 t, 18 x lashing holes, 7 x stake pockets, central, 14 x stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, plug-in, Price: €1,500, surcharge for extendable drawbar Price: €1,500, surcharge for 4 x warning signs with lighting Price: €800, Also available with loading area length of 7,600 mm! -- Printing errors, mistakes, and changes reserved, sample images --, More data at:!, More details at:! Fjdsz Ndmnjpfx Al Ujpn

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 445/45 R19,5 160J, color: other, gearing type: other, front tire size: 445/45 R19,5 160J, rear tire size: 445/45 R19,5 160J, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Wide tires, loading height approx. 1,080 mm, 20 x lashing points, each rated for 6 tons, 20 x lashing brackets, each rated for 6 tons, 18 x lashing holes, 7 x center-mounted rung pockets, 14 x rung pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, plug-in design: €1,500, surcharge for extendable drawbar: €1,000, surcharge for 4 x warning signs with lighting: €800. Also available with loading platform lengths of 8,600 mm, 9,000 mm, or 10,000 mm! -- Printing errors, mistakes, and changes reserved, sample images --, more data at: !, More details: ! Fpsdoz Ndk Topfx Al Uen

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loaded platform height approx. 940 mm, 20 lashing rings at 6 t each, 20 lashing brackets at 6 t each, 18 lashing holes, 7 stake pockets centered, 14 stake pockets in the outer frame, 2 pairs of container locks, Surcharge for front wall approx. 1,600 mm high, plug-in type Price: €1,500; Surcharge for extendable drawbar Price: €1,000; Surcharge for 4 warning panels with lighting Price: €800; Also available with loading area lengths of 8,600 mm, 9,000 mm, or 10,000 mm! -- Subject to errors, misprints, and modifications, sample images -- More data at: !, More Details: ! Fpjdpfx Alez Ndlds Uon

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 940 mm, 20 lashing rings each rated at 6 t, 20 lashing brackets each rated at 6 t, 18 lashing holes, 7 central stake pockets, 14 stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, removable Price: €1,500, surcharge for extendable drawbar Price: €1,500, surcharge for 4 warning signs with lighting Price: €800. Also available with loading platform lengths of 8,600 mm, 9,000 mm, or 10,500 mm! -- Subject to misprints, errors, and changes, sample images -- For more data, see: !, More details: ! Fpjdpfoz Ndkgjx Al Ujn

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Reinforced design, air-suspended with lift axle, axle load gauge for axle load, high-bed length approximately 4,400 mm including slope, low-bed length approximately 8,500 mm, loading height approximately 900 mm, for 2-axle and 3-axle semi-trailer tractors, adjustable kingpin, front wall, 16 x stake pockets in the outer frame, 32 x lashing points, ramp approximately 3,100 mm long, ramps with climbing strips on the outside, ramps for traversing on the gooseneck, additional options available at an extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, -- errors, omissions and changes excepted, sample images --, more data available at: !, More Details: ! Fedsz I Skxspfx Al Uepn

Condition: used, Used PSV approximately 4,000 litre working capacity and approximately 6,300 litre total capacity (product dependent) vertical stainless steel reactor. Unit has welded dished top and bottom heads. Unit measures approximately 1,800mm diameter x 2,450mm straight side. Internal rated 6 bar/full vacuum design pressure at 130 deg.c. External stainless steel coil jacket rated 9 bar/full vacuum design pressure at 185 deg.c. Unit has external stainless steel cladding. Has top entry stainless steel 2-tier, 4-blade pitched blade agitator driven by motor/gearbox. Unit has (4) stainless steel internal wall mounted baffles. Specifications: Capacity: 4,000 L Fsdjzdfb Hopfx Al Uspn Internal Pressure: 6 bar Internal Temperature: 130°C Jacket Pressure: 9 bar Jacket Temperature: 185°C Legs/Lugs: Lugs

Condition: new, empty load weight: 3,780 kg, maximum load weight: 6,720 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, loading space height: 2,420 mm, loading space volume: 42 m³, suspension: air, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, tail-lift, BPW axles, Dautel or BÄR tail lift, load capacity 1,500 kg, 4 cylinders, aluminum platform 1,800 mm long, 2 roll-off safety devices, with own batteries and charging cable, side wall thickness approx. 17 mm, , Front with portal doors for through-loading with short drive-over plate, , 2 rows of combination lashing rails, 7 pairs of lashing eyes embedded in the floor, , Rental price from 720 ¤ per month, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fjdsz Nv S Repfx Al Uopn

Condition: new, empty load weight: 3,280 kg, maximum load weight: 9,720 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, loading space volume: 11 m³, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, with side wall extension 900 mm high, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fpedpfez Nv Hbjx Al Usn

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,580 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 2 x rows of rod lashing rails, 14 x lashing eyes in the floor, walls lined with felt, 1 x interior light, pull-out galvanized stairs approx. 700 mm wide, rear, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fjdpfx Alez Nv Uxj Uspn

Condition: new, Year of construction: 2023, Alzmetall Alztronic i16 table drilling machine 5" touch display Condition: new Call us and ask us about special discounts or send us your request by email with your contact information and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and uniform operator guidance using pictograms - Manual input of spindle speed - target value - Speed display - actual value - Integrated drilling depth display with touch zero point transfer (drilling start) - Virtual drilling depth scale in the display - Machine status displays and warnings in the display (safety)• Main switch, lockable - Right and left rotation through contactor control - Control voltage 24 V - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU Fpodpfx Ajy S Atkel Uon - Spindle braking function - ALZTRONIC only (safety) - Adjustable display timeout Standard Equipment: -AC motor 230 V, 50 Hz -Infinitely variable speed adjustment -Reversing switch for right-left rotation -Spindle protection with electrical protection -On/off button with lockable emergency stop flap -Connection plug, cable length 3m -Paint: structural paint light gray RAL 7035, anthracite RAL 7016, white aluminum RAL 9006 Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thread 190 mm Column diameter 65 mm Manual feed Drill head height adjustment by handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: used, mileage: 19,986 km, power: 170 kW (231.14 HP), first registration: 10/2023, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,053 mm, loading space width: 2,360 mm, loading space height: 400 mm, Equipment: central locking, soot filter, RF40-G135 trailer coupling (Ringfeder), D3 tipper (Meiller), Active Brake Assist, rear axle differential lock, air connection for trailer, electric windows, cab rear wall with window, ball hitch coupling, multifunction steering wheel, PTO (power take-off), radio with SD/USB interface, frame cladding, revolving warning lights on front cab roof, sun visor, lane keeping assist. Fsdpey Ha Alefx Al Uopn

Condition: new, functionality: fully functional, power: 10 kW (13.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,035 kg, empty load weight: 1,305 kg, operation weight: 1,350 kg, lifting height: 2,150 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 08/2026, emission class: euro5, mast type: other, brakes: other, suspension: steel, Year of construction: 2026, operating hours: 2 h, Equipment: additional headlights, adjustable boom, hydraulics, low noise, rubber tracks, standard shovel, Mini Excavator GT JAPAN1000J Fsdpfx Aszrqpkjl Ujpn Crawler Mini Excavator The GT JAPAN1000J mini excavator, in its new and improved version, is a compact machine weighing 1035 kg, designed for precise excavation work in confined spaces. Thanks to its adjustable width of 750–950 mm, it is ideal for narrow passages, private properties, gardens, and urban environments. Perfect for excavation work for installations, foundations, fences, and for clearing and leveling tasks. Kubota D722 engine – reliability and power The machine is equipped with a 3-cylinder Kubota D722 diesel engine with an output of 10.2 kW at 2500 rpm. This engine is known for its smooth operation, low fuel consumption, and high durability. This ensures that the mini excavator delivers stable and efficient performance, even under heavy use. Advanced hydraulic system The GT JAPAN1000J is equipped with a double gear pump with a capacity of 25 l/min and a Load Sensing valve system, which ensures smooth, precise, and energy-efficient operation. The working pressure of 16 MPa guarantees sufficient power for demanding tasks, while the maximum drawbar pull of 19 kN ensures good mobility on difficult terrain. Precision and ease of operation The mini excavator features ergonomic joysticks that enable intuitive and precise control. The swivel boom (54° to the left / 59° to the right) significantly facilitates working along walls and obstacles, while the extendable tracks provide extra stability and adaptation to different working conditions. Compact dimensions and mobility The total length of the machine is 3005 mm, the height is 2160 mm, and the width is adjustable from 750 to 950 mm. The turning radius at the rear is only 510 mm, which allows operation in very confined spaces. The ground clearance at the rear is 380 mm and the minimum ground clearance is 140 mm, which facilitates driving on uneven terrain. The tracks with a width of 180 mm and a length of 1330 mm provide stability and good grip. Technical data Weight 1035 kg Engine Kubota Configuration 3-cylinder diesel Rated power 10.2 kW / 2500 rpm Maximum drawbar pull 19 kN Type of hydraulic pump double gear pump Main pump output 25 l/min Working pressure 16 MPa Type of control valve Load Sensing valve Fuel tank capacity 15 l Arm digging force 5.5 kN Bucket digging force 6.5 kN Joystick Yes Swivel boom Yes Extendable tracks Yes Travel drive Two travel speeds Bucket capacity 0.02 m³ Travel speed 2.1 / 4 km/h Platform rotation speed 13 rpm Boom swivel angle left 54° / right 59° Grading ability 30° Maximum digging height 3060 mm Maximum dumping height 2150 mm Maximum digging depth 1870 mm Maximum digging radius 3410 mm Maximum reach at ground level 3350 mm Turning radius rear 510 mm Overall length 3005 mm Overall width 750–950 mm Overall height 2160 mm Ground clearance rear 380 mm Minimum ground clearance 140 mm Track width 180 mm Track length 1330 mm