Used Wall Hood for sale (6,688)

Year of construction: 2022, condition: used, functionality: fully functional, This is a hood-type dishwasher from the manufacturer Meiko, model Upster H500 M2, manufactured in 2022, including feed/discharge tables, spray arm, and mobile water softener. The machine has undergone a major inspection in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The hood-type dishwasher has only 5388 operating hours and 9648 wash cycles and was used in a small company canteen that has since closed. You will receive an invoice with VAT shown. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating manuals, connection diagrams and spare parts. Inspection according to DGUV V3. Technical data: W x D x H: 635(687) x 750(850) x 1470 mm, feed/discharge table dimensions: 1200 x 700 mm Basket size: 500 x 500 mm Passage height: 440 mm Program run time: 90 / 150 / 210 s Basket capacity: 40 / 24 / 17 baskets/h (theoretical) Tank capacity: 22.0 L Rinse water quantity: 2.6 L/wash cycle Total connection value: 10.6 kW Fuse rating: 20A On-site boiler heating: 7.50 kW / 10.82 A Tank heating: 2.00 kW / 8.70 A Wash pump: 0.75 kW / 4.60 A Degree of protection of the machine: IP X4 Condition: Used, inspected and fully functional. Your advantages: Simplest operation thanks to clear and easy-to-understand symbols Digital temperature displays for wash and rinse water 3 program run times Ndsdpfxezzlnts Akqoc Eco-filter system for best cleaning results through warmer and filtered tank water Machine and hood double-walled – ideal heat and noise insulation Hood open at the rear – prevents steam from bothering the operator Temperature-dependent extension of wash time – hygiene safety under all operating conditions Wash and rinse systems made of stainless steel Hood start automatic Including lye pump, pressure booster pump, as well as rinse aid and detergent dosing devices, basket equipment Optional: with built-in water softener EW 10 Standard equipment: Liquid detergent dosing device with suction lance for on-site storage containers Rinse aid dosing device with suction lance for on-site storage containers Connection set Lye filter system AktivPlus Pressure booster pump Basket basic equipment: 1 universal basket VKV 50/1 Additional equipment: Original Meiko feed/discharge tables Including spray arm Including mobile water softener Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is made exclusively according to our general terms and conditions (GTC).

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! Njdpfx Aksz I Tt Isqsdc The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: C116353, Equipment: CE marking, Reconditioned Production Ready！ Ref Code:1014 Emmegi Classic Magic Electronic double‑head cutting‑off machine Twin‑head saw for aluminium and PVC profiles, with NC‑controlled DC motor driving automatic mobile head movement. All angles pneumatically settable down to 22°30’ external. Key Features Blade: Ø 450 / 500 mm cemented carbide blades Cutting length: 5 m useful cut Angle range: 90° to 22°30’ external (pneumatic tilt) Positioning: Magnetic strip direct measuring system Control: Alphanumeric fluorescent display (2 × 40 chars) Memory: 99 profile corrective values (auto angle calculation) Nodey U Tczspfx Akqedc 20 cutting lists (50 rows each) via keyboard 10 cutting lists (100 rows each) via USB (PC) Connectivity: USB port, RJ45 network card; label printer ready Clamping: Horizontal/vertical pneumatic vices with low‑pressure device Safety: Pneumatic full protective hoods for cutting zones Lubrication: Water spray‑mist (oil emulsion or minimal quantity oil) Technical Specifications Motors: 2 × 2.2 kW (400 V); total 5.3 kW Blade speed: 2,800 rpm Operating pressure: 6–8 bar; air consumption 15 NL/cycle Dimensions (5 m version): 9,400 × 1,080 × 1,840 mm (L×D×H) Weight: Approx. 1,500 kg Applications High‑precision cutting of aluminium / PVC profiles for windows, doors, curtain walls, and light alloy processing.

Condition: used, Erlab Captair Filtair 936 Filter Fume Hood The ductless, filtering chemical fume hoods from Erlab offer the most powerful filtration worldwide and guarantee safety and performance. A system with countless advantages that provides comprehensive protection throughout the laboratory and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical performance parameters of the fume hood and ensures your safety at all times. Advantages Perfect user protection Filtration safety: All models of the captair@ filtair filter fume hood comply with the AFNOR NFX 15-21 Class II standard. Retention of chemical vapor pollutants in the work area, guaranteed by controlling the air velocity at the front and complying with the standards for pollutant retention (XPX 15203, BS 7258, DIN 12927). Sampling valve for the exhausted air enables the user to monitor the filter saturation at any time using color reaction tubes (not included). The front and door made of acrylic protect against any chemical splashes (fire classification, NF P92.507 standard). Ergonomics and comfort Sloped front for a better view of the work process. Well-designed openings for the hands provide the user with plenty of freedom of movement in the work area. Stuffing boxes for inserting electrical or power cables into the work area. Work position adapted to the user. Very low noise level (49 dBA). Transparent walls for a good overview of the work processes in the work area. Easy installation / Energy saving No exhaust duct required; a power outlet is sufficient. Direct installation in your laboratory or on an optional mobicap" rolling table. Energy saving, through the recycling of the purified air from the unit without consuming heated or cooled air. Ndjdeyk Dq Hspfx Akqsc Erlab/Captair Filter Fume Hood Filtair 936. Connection values: 230 V. 50 Hz. 94 W Safety class 2 Air flow m³/h: 200 m³/h Air inlet velocity front m/s: 0.51 Filtration type S Filter 960-961. Safety class 3 Class for pollutant retention B 2 fans Analog flow meter Noise level approx. 51 dB(A) External dimensions: 110x84x74 cm Internal dimensions: 87x82x73 cm Volume of the work area m³: 0.432 Two handles in the front window Available filters: MF and VF CE marking. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Nedpfx Aezc Ilxokqjdc

Condition: new, Year of construction: 2025, color: grey, We at Eventmobile Saar GmbH offer you an unbeatable complete package for professional mobile catering operations. Our new 20' gastro sea container combines elegant design with the best German and European brand quality – from the insulated structure to the custom-made stainless steel work surfaces and high-quality catering equipment. Whether for snacks, street food, catering, or events: this container is fully equipped, can be used independently, and is designed for year-round operation. HIGHLIGHTS & BENEFITS 🌡️ Suitable for year-round use: High-quality structure made of isothermal aluminum-fiberglass laminate for optimal internal temperatures in any season. ⭐ Brand-name catering equipment: Certified professional gas appliances from the quality manufacturer Bertos, fully made of stainless steel. 🔌 Ready for use & self-sufficient: Complete water system, cooling & ventilation fully integrated. 🛠️ Flexible customization: Individual requests (payload, room layout, additional serving hatches) can be easily accommodated. ⏱️ Predictable availability: Delivery time up to 6 months, depending on the desired configuration. 🛡️ Safety & warranty: 1 year full warranty on the structure and all kitchen equipment. 📐 TECHNICAL DATA & DIMENSIONS 🏢 Manufacturer / Model: Gastro Sea Container / Food Container 🎨 Color: Anthracite (RAL 7016) 📏 Length: 5,898 mm 📐 Width: 2,352 mm 📏 Height: 2,385 mm GASTRO PROFESSIONAL EQUIPMENT 🔥 Gas appliances: - Gas grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B - Gas fryer "Bertos", 2 x 8 liter tank capacity, dimensions (W x D x H) 600 x 600 x 290, power: 13.2 kW, made of stainless steel, with drain valve, GL8+8B - Gas stove "Bertos" with 4 burners, dimensions (W x D x H) 600 x 600 x 290, power: 12.4 kW, made of stainless steel, G6F4B ❄️ Cooling - Two small under-counter refrigerators "Liebherr" - Refrigerator with glass door, also suitable for beverages "Klarstein" - One small under-counter freezer "Liebherr" - Chest freezer for cooling from 4 to 10 degrees 💧 WATER SYSTEM & HYGIENE - Water system with water canisters, 30 liter capacity with fresh and wastewater canisters - Double stainless steel sink with faucet - Hygiene package consisting of a paper towel dispenser and a soap dispenser - 10-liter hot water boiler - Pump Additional equipment Serving area and work surface made of brushed stainless steel Two large, easy-to-open serving hatches for optimal customer contact Fireproof insulation wall throughout the cooking area Nedpfx Ae Ad Ihlekqsdc Exhaust hood with labyrinth filters Non-slip flooring for catering Sneeze guard available as an option Convenient access via a separate side door Individual requests? We also manufacture to order! Other equipment, additional serving hatches or higher payload can be flexibly implemented. Call us and get a non-binding consultation!

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Ndjdpfx Aszlktpjkqsc Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Njdpfx Aezwg H Aokqsdc Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: used, Free-standing pavilion constructed by upcycling the copper hood from a brewing vessel. Diameter is determined by the existing copper hood, so various different sizes are possible. A variety of options regarding feet or anchoring. Diameter: 5 m (depending on copper hood availability) Material: Copper / stainless steel Base construction: Pipe feet with base plates; optional: height-adjustable feet Features: Flue pipe cover; illumination system; copper side-wall Nodpfxjvcqmne Akqodc

Condition: like new (used), GIF Kitchen Ventilation Ceiling Ventilation Ceiling System The optimal solution for kitchen ventilation, commercial kitchens, and the food industry. The best alternative to extractor hoods GIF kitchen ventilation ceilings are installed in: • Company canteens • Hospitals, clinics • Restaurants / hotels • Retirement homes, homes for the disabled, and children • Military accommodations, field kitchens • University cafeterias, school kitchens • In-flight catering • Correctional facilities • Public facilities Patented quality – Made in Germany The GIF kitchen ventilation ceiling is a complete, wall-to-wall, surface-active solution including large-area exhaust and supply air panels, lighting, and compensation surfaces with an installation height of just 200 mm. The use of the ceiling cavity as a pressure chamber in accordance with VDI 2052 enables implementation as an "open" or "closed" system, always maintaining the largest possible proportion of air-active surfaces. The large-scale capture of frying, cooking, and other fumes, as well as the large-scale, low-turbulence supply air intake, guarantee a comfortable climate free from condensation and drafts. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. On the supply air side, the GIF active cassette ceiling is used for low-turbulence, large-scale supply air intake according to the stratified flow principle. An energy-efficient solution is thus standard. The special design ensures indirect supply air guidance, even for high air volumes at low inlet velocities, without an induction pulse. Since the active cassettes are identical in the exhaust and supply air areas, they can be interchanged at will. Facts and Benefits Complies with or exceeds current guidelines (VDI 2052, VDI 6022, EN 16282), including accessibility to underlying components (no access openings required). Durability of the material: CNS 1.4301 Integrated deflection system for rapid pulse reduction Economical and hygienic cleaning of only 4 parts per m² in the dishwasher Pulling and pushing of the active cassettes in the support profiles makes them easy for anyone to remove without tools Partial cleaning possible as needed No need to climb onto greasy, hot kitchen appliances (risk of slipping) HACCP-certified process Nsdpfx Aot Hglkokqodc Technical Specifications Exhaust Air Air flow rate: 260-300 m³/h m² Separation efficiency: up to 97% Dimensions: 500×485 mm Pressure drop: 20-25 Pa Material/Surface: CNS Material No. 1.4301 Weight per m2 without support structure: 10.00 kg Draft air flow: 360-500 m3/h m2 Dimensions: 500×485 mm Pressure drop: 25-30 Pa Material/Surface: CNS material No. 1.4301 Weight per m2 without support structure 10.00 kg Airflow velocities: less than 0.2 m/s Ceiling area: 6500 x 3000 mm 19.50 m² 300 supply air flat ceilings, 250 x 485 mm 200 supply air flat ceilings with sound absorption, 250 x 485 mm 220 active cassette ceilings, 500 x 485 mm 14 system support profiles, 6500 mm 7 system support profiles, 2000 mm Lighting fixtures installed flush with the ceiling in the GIF ventilated ceiling Financing through our bank is also possible. komplett-konzept.leasingo.de Further items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Ndjdpfx Akszlbpbjqjc Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Nodsu S Tfgjpfx Akqsdc Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: used, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. Ndjdpfxjyltvbs Akqec We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: good (used), Year of construction: 2009, operating hours: 21,955 h, functionality: fully functional, HEIDENHAIN iTNC530 controller Table dimensions 5300 x 750 mm Maximum table load 4500 kgs X-axis travel 4500 mm (pendulum operation) Y-axis travel 800 mm Z-axis travel 620 mm Spindle nose to table surface 325 - 925 mm Spindle speed 12000 rpm (Kessler Celox motor spindle) Torque 183 Nm Spindle taper HSK63 ATC 56-position magazine Middle wall in working area - pendulum operation possible Rapid traverse X/Y/Z = 30/40/40 m/min Power consumption 25 kVA Weight 21000 kgs Space requirement L x W x H = 10.4 x 4.2 x 3.2 m Equipment, accessories Nodpsyugupofx Akqsdc - Large chip conveyor - Large inclined water system 1800 l Internal coolant system and flushing pump - 2x special-design extraction systems – without piping - Machine hood with automatic roller blind - Machine doors with automatic drive and Rotoclear window - Water system 3 x 2 m, position to the left of or behind the machine - Hydraulic clamping unit for machine interior - Blum RMP measuring probe - Separation wall – pendulum operation possible - Hedelius service complete - Pipes for machine cooling, flushing, and pneumatics replaced in 07/2024 - Vises and fixtures on machine table are not delivered with the machine. The machine is no longer in production (it has been professionally stored) and was dismantled in fully functional condition.

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Ndedpfx Aoxy Tm Ijkqec

Condition: good (used), Code: 0473 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blade inclination 90 - 30 degrees with display Manual table rotation from 0 to 180° Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cutting width mm 900 Motor power Hp 15 (Kw 11) Automatic raising of the blade with bimanual control Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 N° 2 suction inlets mm 150 Ndjdpfx Aszquw Aokqsc Compressed air 7 Atm Overall dimensions of disassembled machine : Machine mm 3200 x 2200 x 2200 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h Weight kg 2200

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, tank capacity: 36,784 l, total height: 6,245 mm, inner diameter: 3,400 mm, outer diameter: 3,770 mm, overall weight: 4,000 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 2 x 37 m³ CCT Vessels / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 2 Total volume: approx. 36,784 liters Tank type: Pressure vessel Condition: used Suitable for food use: yes Design: suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Total height: approx. 6,245 mm (incl. insulation dome approx. 7,245 mm) Weight (empty): approx. 4,000 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.9 bar Cone wall thickness: approx. 3.5-5 mm Top head wall thickness: approx. 6 mm Shell/Cylinder wall thickness: approx. 3 mm Operating temperature: -10°C / +50°C Material: Inner shell material: Stainless steel V2A (1.4301) Internal surface: ground and pickled Heating/Cooling System Cooling medium: Glycol Operating pressure: 3.0 bar Operating temperature: -3 °C Heating/Cooling system material: Stainless steel V2A (1.4301) 1 x shell cooling zone with approx. 112 ltr. capacity 1 x cone cooling zone with approx. 40 ltr. capacity Insulation Insulation thickness: approx. 150 mm (shell + top head), cone: 100 mm Insulation material: PU foam Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminium trapezoidal sheet Equipment Mounting type: Suspension lugs Number: 4 Fastening: fixed Top head type: Torispherical head Lower head type: Conical Top head: 1 x manway DN 1000 with insulated hood and vent DN 80 1 x roof edge railing 1 x spray ball DN 32 incl. spray tube (removable) 1 x Cleaning-Air valve combination (RLV) consisting of: 1 x vacuum valve DN 50 1 x safety valve DN 25 1 x cleaning connection DN 100 1 x air connection DN 50 (threaded) Shell: 2 x temperature measuring connection with insulated box 1 x condensate pipe DN 32 1 x sampling line DN 10 1 x cable protection pipe DN 50 1 x cleaning line DN 50 1 x return manifold DN 40 (cooling) 1 x supply cooling DN 25 1 x cooling vent DN 10 1 x cooling drain DN 20 Lower head/cone: 1 x sample valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded outlet DN 100 Ndjdpjyhzrgsfx Akqjc Documentation: Drawing Inspection book TÜV certificate

Condition: good (used), Year of construction: 2013, Hein Luxrotor rotary furnace - used - year of manufacture 2013 - for sheet metal 58 x 98 - electric - total power approx. 70 kW - computer control with touchscreen - fume hood with fan - ceramic wall Nedpfjzly Ezsx Akqedc - 1 trolley - trolley top locking system - technical condition good / device inspected and cleaned - collection from warehouse - price on request

Condition: excellent (used), functionality: fully functional, tank capacity: 68,000 l, usable tank capacity: 65,000 l, total height: 9,865 mm, inner diameter: 3,400 mm, outer diameter: 3,800 mm, overall weight: 4,200 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 20 x 68 m³ ZKG Tank / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 20 Total volume: approx. 58,000 liters Tank type: Pressure tank Condition: Used Suitable for food: Yes Design: Suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Cylindrical height: approx. 6,000 mm Total height: approx. 9,865 mm Weight (empty): approx. 4,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.86 bar Wall thickness, cone: approx. 4–5 mm Wall thickness, top head: approx. 6 mm Wall thickness, shell/cylinder: approx. 3.5–4 mm Operating temperature: -10°C / +50°C Material: Inner shell material: V2A (1.4301) Internal surface: Ground and pickled Heating / Cooling System Cooling medium: Glycol Operating pressure: 2.0 bar Operating temperature: -3°C Heating / cooling system material: V2A (1.4301) 2 x shell cooling zones (approx. 11 m² each) with approx. 100 liters capacity each 1 x cone cooling zone (approx. 4 m²) with approx. 70 liters capacity Insulation Insulation thickness: approx. 150 mm Insulating material: PU foam / mineral wool Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminum trapezoidal sheeting Equipment Mounting type: Hanging lugs Number: 4 Attachment: Fixed Top base type: Basket dome Bottom base type: Cone Top head: 1 x manway DN 500 with insulation hood 1 x roof edge railing 1 x valve dome with the following fittings/connections: 1 x vacuum valve (DN 40) 1 x safety valve (DN 40) 1 x cleaning fitting with spray head DN 32 (removable) Shell: 2 x connections for temperature measurement with insulation box 1 x cable protection tube DN 50 1 x dome drain pipe DN 15 1 x cleaning line DN 50/40 3 x cooling supply (DN 25 / R1") 3 x cooling return (DN 25 / R1") Bottom/cone: 1 x sampling valve DN 10 1 x swiveling cone NW 450 Nodpsyhzq Asfx Akqodc 1 x cone with threaded connection DN 65 terminating Documentation: Drawing Inspection book TÜV certificate The tanks originate from various years of manufacture (1990–2004) and may differ slightly in equipment and design.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. Rotary Motor / NEW / In Stock & Immediately Available Price: €35,190.00 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as roadside verges, riverbanks, steep slopes, or for clearing around gas and electricity lines - Mulches brush and wood up to 30 cm diameter - For excavators from 13 to 30 t - Suitable for mounting on various attachment plates - Drive designed for hydraulic motor, depending on the carrier’s oil flow - Indirect V-belt drive with 5 belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades Njdpfx Akeyltv Isqodc - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front protection with chains - Rear protection with chains - Height-adjustable skid runners in sandwich construction, reinforced with a hard metal plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST Axial Piston Motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 80 - 170 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. An additional hydraulic circuit is needed for the hood. The machine is supplied without hoses or fittings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all available for immediate delivery! Please contact us for more information. We are happy to provide you with a financing offer upon request. We are the official sales and service partner for Seppi M. We are the official sales and service partner for Magni telehandlers. We are the official sales and service partner for DMS. We are the official sales and service partner for Westtech. We are the official sales and service partner for JCB construction machinery. We are the official sales and service partner for Mercedes-Benz. We are the official sales and service partner for Iveco. We are the official sales and service partner for Holp. We are the official sales and service partner for OilQuick. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range for you! Errors and prior sale reserved! = Further Information = Please contact Marius Herden for more details.

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Njdpo Ad Ig Isfx Akqodc Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ). Seppi M. H-SMO-B 125 Mulcher / NEW / in stock & immediately available Price: €11,790.00 net / €14,030.10 gross Working width: 125 cm Overall width: 140 cm Depth: 120 cm Height: 60 cm Weight: 380 kg Support roller: 152 mm V-belts: 4 - Powerful and manoeuvrable attachment suitable for excavators or crawler vehicles, ideal for maintaining embankments and fallow land - Mulches grass and light brush up to 7 cm diameter - Suitable for excavators from 5 to 13 tons - Designed for mounting on various adapter plates - Drive designed for hydraulic motor according to the carrier unit's oil flow - Indirect belt drive with 4 V-belts - Drop-forged counter blades - Double-skinned housing made from high-tensile steel - Adjustable discharge hood with rear rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable by 5 cm - Rotor wall thickness: 12.5 mm - Front protection with chains - Colour: red RAL3020 · anthracite RAL7021 OPT 371 Rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 60 - 120 OPT 099 Floating mounting (parallel linkage) Optional: MS08 adapter plate incl. bolts and installation = €750.00 net Three hydraulic connections required: pressure, return, and drain. Unit delivered without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products available for immediate delivery in our warehouse! Simply contact us at / . Ndedpfjymi Enox Akqjc Finance options available upon request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We can supply the full range of Seppi M. products! Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further details.

Condition: used, functionality: fully functional, Mettler Toledo ReactIR-4000 AUTOCHEM Spectrometer S-1206-0900A MCT Mid-Band Detector FTIR Analyzer Lab with S-1506-0001A Power Supply with Software. In situreal-time data collection- Investigate chemistry and processes in real-time, directly in reactor. Mid-infrared technology - Deduce reaction pathways, mechanisms and kinetics with the spectral information. ReactIRTMReaction Analysis Software - Determine reaction performance, conversion, completion. Analyze and monitor virtually all classes of chemical reactions. Sealed Optics - Operates safely in fume hoods, mounted either on bench top or wall. CompactTower Design - Preserves valuable lab space. Product Specifications: Mid FTIR (4800 to 450 cm-1) analyzer Nsdpfxjua Hdrj Akqodc Compact size Sealed optics Temperature stabilized Pinned in-place detector modules Good working condition. Please check out our other listings as well.

Year of construction: 2017, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combi-steamers, including the connection kit, fits the CMP, SCC 61/101 electric combi-steamers from the production year 2011 to the latest model series (Index H + I); this hood is no longer suitable for the iCombi series. The hood has been inspected in our in-house workshop and is fully functional. The hood has a few dents, see photos, but this does not affect its function in any way. You will receive an invoice with VAT shown. Ndodpfx Ae Aa I E Askqsc Are you looking for a specific Rational appliance type? Ask us, we have access to a large range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs Professional overhaul / inspection & expert cleaning Checked & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which binds and carries away vapors and fumes. Elaborate measures for exhaust air installation are a thing of the past. An external connection is no longer required. Installation is simple and can even be done later. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE17125022437 Year of manufacture: 2017 Type: 60.72.320 Condition: used, inspected, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Njdpfxeztpxms Akqodc