Used Water for sale (7,626)

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Dkjdpfx Akezg Tzxj Aow Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, No. 3280 Dodpfx Akezhblne Aokw Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: good (used), 12V, 50Hz, 5A Application: Water treatment plant Width: 175 mm Height: 125 mm Depth: 75 mm Weight: 548 g Dkedpfx Ajzddbljk Asw Condition: good, second-hand

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 240202088, total width: 1,300 mm, total length: 700 mm, total height: 2,550 mm, overall weight: 350 kg, water tank capacity: 120 l, noise level: 70 dB, input voltage: 400 V, water pressure: 200 bar, pump capacity: 14 l/min, working width: 1,100 mm, Equipment: type plate available, High-pressure washing booth (new installation), working area 1100mm x 650mm. Temperature range adjustable from 0-45°C. The system features a chip screen and filter. Dedpfxozlp Ifo Ak Ajkw In the washing area, the system is equipped with a high-pressure lance and an air blow gun. Stainless steel AISI304, steam extraction, water level sensor.

Condition: excellent (used), 411 USED Hoshizaki - ice maker. Dkedpfxjzdyffo Ak Aew Deltamatic: water mixer Price per set. TECHNICAL DATA: - Capacity: approximately 200-250 kg of ice per day. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Year of construction: 2026, Stainless steel housing Water connections: 1/2" Maximum temperature of the tap water: 65° C Setting range: 2 - 60° C Temperature accuracy: +/- 1° C Min./max. tap water pressure: 1 bar/5 bar Dodpfozux Slox Ak Ajkw Max. inlet water pressure ratio: 1:5 Max. water dosage: 999.9 l Water quantity accuracy: +/- 1% Flow rate at 1 bar and 20 °C: 18 l/min Flow rate at 5 bar and 20 °C: 40 l/min Voltage/frequency: 230 - 110 V / 50 - 60 Hz Power consumption: 25 VA All prices are quoted excluding VAT. Delivery: ex works Syke (shipping by freight forwarder possible, costs to be borne by the customer) Payment: prepayment upon order We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical changes, and errors.

Condition: new, functionality: fully functional, Waters 2420 ELSD Low Flow Nebulizer. 2 for sale. 1 piece/590 EUR. Dodoua Iabjpfx Ak Aekw Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, New Brunswick Scientific G76 Water Bath Shaker. New Brunswick Scientific water bath shakers are equipped with a one-piece seamless water bath of deep-drawn stainless steel which is easy to keep clean. Model G76 is equipped with a triple-eccentric Gyrotory drive which is precision-machined and stabilized to rotate the shaker platform in a 13 mm diameter circular orbit. The gyrotory shaker is engineered to handle any workload from 25 mm test tubes to 1,000 mL flasks with equal ease. Dkedpfx Asupvtisk Aow Features: Reliable, Sophisticated and Convenient Platinum RTD Sensor Precise Temperature Feedback Regulation Triple-Eccentric Gyrotory Drive Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Dkedpfx Aezvn Hzek Asw Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Jogging Table (Delivery)

Year of construction: 2001, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 25,000-liter storage tank for storing water and wastewater, as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer's certificate according to DIN standard and a type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 8,390 mm, Diameter: approx. 2,000 mm, Weight: approx. 4,500 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-coupling connector according to DIN can be offered as an additional option. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer cost-effective delivery on request. Inspections of our systems are possible at any time. Additional tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. General information: Dkodpfxec Nkyzj Ak Asw All offers are valid ex works Warstein, free of charge for loading. Delivery can be offered at a reasonable additional cost. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and, as an approved specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 1995, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company in accordance with the German Water Resources Act (WHG) Dear Sir or Madam, we offer a 50,000-liter storage tank for the storage of water and wastewater as follows: This is a 30 cbm storage tank made of steel. Material: S235JRG2 steel. Includes manufacturer’s certificate according to DIN standard and type plate. The container is cleaned on the inside and insulated with bitumen on the outside. Suitable for both underground and above-ground storage. Container dimensions: Length: approx. 10,900 mm Diameter: approx. 2,500 mm Dsdpfxoc Nkzgo Ak Askw Weight: approx. 8,000 kg Shape: cylindrical Equipment: optional For use as a fire water tank, a suction line with a type A quick-release coupling according to DIN standard can also be offered. Of course, you can also participate in the design of your tank system! All our systems are extensively inspected and checked by selected employees in our company. We also offer a cost-effective delivery service on request. You are welcome to visit our facilities at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please feel free to call us – one of our experienced employees will be happy to advise you. General information: All offers are valid ex works Warstein, free loading. Delivery can be offered at a reasonable cost for an additional charge. Delivery time = immediately You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as an approved specialist company in accordance with the German Water Resources Act (WHG), professionally empty, clean, dismantle and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 2017, condition: new, machine/vehicle number: 1C330966, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10 Nominal compressor capacity (related to 1 bar absolute and 20 °C, depending on compressor type and lubricant): 250 m³/h Connection: G 1" Dkjdpfxsdbwf Ij Ak Asw Container volume: 50 liters Volume of the pre-adsorber: 3.2 liters Volume of the effective activated carbon adsorber: 8 liters

Year of construction: 1996, condition: good (used), Offer: Drinking water treatment plant Water treatment plant 120 cubic meters/hour Djdpfx Akehr D Hns Aokw Year of manufacture: 1996 Fully functional Housed in a 6m container Control system and pumps included. Previously used to supply a container village.

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Dedpfxshwhfqo Ak Ajkw Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, laser power: 12,000 W, warranty duration: 60 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Dsdpfx Aohwhf Aok Askw Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: as good as new (ex-display), Year of construction: 2023, Briefly stated: Base axis (X): 1.3-2 mm Outrigger (Y): 1.3-4 mm Accuracy: 0.06 mm Technical data Dksdpfxjhw Nfqe Ak Asw Linear axis accuracy: ± 0.1 mm/m Maximum travel speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circular accuracy: ± 0.1 mm Z-axis stroke: 180 mm Base axis (X): 1.3 m, 3 m, 4 m Outrigger (Y): 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce1 drilling guide Splash guard1 FlowTexturing (FTT) Abrasive slurry system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Deionized water conversion kit * Required for FlowTexturing

Condition: excellent (used), Coolant pump, immersion pump, coolant pump, centrifugal pump, cooling lubricant pump Dodpohtryxsfx Ak Ajkw -Manufacturer: Grundfos, coolant pump type SPK1-11/8 AAA -Drive: 0.25 kW 2850 rpm -Max. flow rate: 1.0 m³/h -Max. delivery head: 22 m Maximum temperature: 90 °C -Dimensions: 180/150/H590 mm -Weight: 11 kg

Condition: good (used), Year of construction: 2001, I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2001. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Dsdpfei U Dxuox Ak Askw Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: used, Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: volts Dksdpsd Ergpjfx Ak Aew -Power kW - Delivery rate: 100 l / min -Dimensions: O 250 / H330 mm -Weight: 20 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 8,869 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, type of input current: AC, input voltage: 400 V, table length: 4,100 mm, table width: 2,100 mm, pressure: 6,500 bar, rapid traverse X-axis: 17 m/min, rapid traverse Y-axis: 17 m/min, table height: 900 mm, power: 73.55 kW (100.00 HP), Equipment: safety light barrier, Flow Mach 500 4020 - Material Support Area Dsdpfx Aevvl Ugjk Aokw • X-axis ca. 4.100 mm • Y-axis ca.2.100 mm - Net Cutting Area (2 D) • X-axis ca. 4.000 mm • Y-axis ca. 2.000 mm -Precisions Z-axis, programmable, servo-driven, Z-axis travel 305 mm -Cutting head PASER 4 Dynamic Waterjet XD Technology • Beveling and 3D cuts up to 55˚ without taper • Produces 2D and 3D parts with tight tolerances at high speed • 5-axis kinematic system -Pump Intensifire HyperJet 94i-D • 6.500 bar, 75 kW (100 PS), 4,92 l/min • Closed loop cooler • Pump tool kit -Software FlowMaster + FlowExpert -Material Support System + Catcher tank • Stainless steel construction • Waterlevel control module • Prepared for use with an abrasive removal system • Stainless steel slats as workpiece support - Abrasiv Delivery System PASER CF 900 • Garnet capacity 425 kg - Flow UltraPierce Material Piercing Assist (for composites, glass, stone) -Machine under power, is working -actualy price of new machine with same configuration: 370.000 € -It could be sold the complete still working waterjet job shop company in Poland (real estate, machine park with 3 Flow waterjet cutting systems, base of ca. 160 regular customers, complete company equipment)

Condition: like new (used), Year of construction: 2025, operating hours: 400 h, functionality: fully functional, pressure: 2,800 bar, overall weight: 3,000 kg, rotational speed (min.): 1,900 rpm, pump capacity: 30 l/min, Equipment: type plate available, HAMMELMANN AQUAJET 144 GWARANCJA PRODUCENTA Djdpfxovgrpxe Ak Aokw SILNIK DEUTZ TCD 6.1 ST5 140 KW DOSTĘPNY OD ZARAZ

Condition: good (used), Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Motor Schlüter 1.5 kW -Container capacity: liters Dksdjvmxx Tjpfx Ak Aow -Dimensions total: 850/620/H670 mm -Weight: 124 kg

Condition: refurbished (used), Fire extinguishing water tank according to DIN 14230 (underground fire extinguishing water tank): Dkjdpevmz Idsfx Ak Ajw 40,000 liter fire extinguishing water tank for underground storage, single or double-walled, 1 manhole DN 600 with blind cover including seal and screws, outside with bitumen insulation - used - Tank volume: 40,000 liters / 40 m³ Length: approx. 8,720 mm Diameter: approx. 2,500 mm Weight approx. 6,600 kg Material: steel material S 235 JRG 2 The tank has a fire extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the form B version without a dipstick. The tank also has a vent flange in NW/DN 100 with a cap with a total length of approx. 1,300 mm suitable for 800 mm of earth cover and 500 mm above ground. The tank is emptied, cleaned and was given a bitumen exterior coating by us at the factory If desired, we can equip the tank with a full internal coating based on bitumen (against corrosion) or an epoxy resin interior coating We are happy to offer you cost-effective delivery with our own truck. Simply let us know the delivery location and you will receive the exact freight costs immediately. A viewing is possible at any time by prior appointment. Trade-in and purchase of tanks/containers is possible, just talk to us about this. We of course always have such tanks in stock in the following sizes: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 50,000, 60,000, 80,000, 100,000, 120,000 liters

Condition: excellent (used), The reverse osmosis unit is capable of a flow rate of up to 2.0 m³/h by producing desalinated water with a conductivity below 10 μS/cm. Storage tank with pump for clean water Dodsr Dthmepfx Ak Aekw Conductivity meter for measuring the conductivity of water.

Condition: ready for operation (used), Year of construction: 1987, Recooling capacity at water flow temperature of 15/10°C: 2.3/2.1 kW Volume flow: 0.5 m³/h electrical Connection: 380 V, 1 kW Dodsr Ezdrjpfx Ak Askw Space requirement: 900 x 600 x 1020 mm Weight: 160kg Water connections reduced to 1/2".