Used Water for sale (7,641)

Condition: used, Year of construction: 2003, Manufacturer: Falch Hochdruck-Strahlsysteme GmbH Vehicle type: Tandem trailer Type No.: H692.03 Dedjw Sdxyjpfx Ak Askw Year: 2003 Permitted gross weight: 2600 kg Axle load: 1–1300 kg / 2–1300 kg

Condition: used, High-capacity industrial water treatment, filtration, and pressure boosting plant. This comprehensive system is composed of premium-tier components, primarily powered by high-efficiency Grundfos pumping stations and modular multi-port filtration vessels.The system is suited for manufacturing facilities, municipal water networks, food & beverage industries, closed-loop cooling systems, or large commercial properties. The Package Includes: 1. High-Pressure Vertical Multistage Pumps:Grundfos CR15-12 A-F-A-E-HQQE (Quantity: 1 units) 2. End-Suction Centrifugal Pumps:Grundfos NBE40-160/158 A-F2-A-BQQE ((Quantity: 4 units on the pallet) 3. Filtration & Water Softening Unit:Multi-cylinder battery consisting of large blue composite pressure vessels (FRP tanks) for media filtration, iron removal, or water softening. Dkjdpfoz Ahh Sjx Ak Ajw 4. 2 units x Grundfos (Vertical Multistage Pumps). Condition: Used, as shown on photos. Stored in a dry indoor facility.

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6.5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2.5 - 5 bar Length: 5000 mm Width: 1000 mm Height: 2000 mm Operation / Control: Simatic S7-300 Dedpfx Akez E Rv Ue Aekw Material: membranes from polyamid Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel

Year of construction: 2021, condition: used, Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. Djdpfez Ndazjx Ak Aekw The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Oil-water separator for compressor condensate Filtration: Oil filter and activated carbon filter Weight: 6.8 kg (empty)

Condition: used, Year of construction: 2023, machine/vehicle number: 8102046714, Used Atlas Copco Oil-Water Separator OSC 1250 For compressors with a free air delivery (FAD) of up to 75 m³/min The OSC 1250 is used and in good condition. The scope of delivery includes 4 new filter bags (see photo). Technical Data: Flow rate (with dryers and filters): Max.: 1,250 l/sMin.: 608 l/sFlow rate (without dryers and filters): Max.: 1,563 l/sMin.: 839 l/s Dsdpfjz D Udyox Ak Askw Residual oil content at outlet: max. ≤10 mg/l Connections: Condensate inlet: 2 x ¾" Water outlet: ¾" Test connection: ¼" Dimensions: Width: 800 mm Height: 960 mm Length: 850 mm Weight: 91 kg Visit our showroom in Erlangen, Germany.With over 450 m² of exhibition space, you will find a wide selection of both used and new compressors.

Year of construction: 2020, condition: used, This listing is for Puro-i III | RO Water Purification System The unit is in full working condition and ready for immediate use The Avidity Science Puro-i III is an integrated reverse osmosis water purification system designed to produce Type III laboratory water directly from potable tap water. Depending on configuration, the system provides production rates from 5 to 30 L/hr, with dispensing at up to 2 L/min. Features include twin-pass RO technology, automatic RO sanitisation and an interactive touchscreen interface. Typical specifications include Type III water production, up to 99% inorganic rejection and feed-water pressure of approximately 0.5–6 bar. Available configurations include different production rates, reservoir conductivity monitoring and loop options Transparency Report and Technical Audit: Dedpjz D H D Eefx Ak Ajkw Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: excellent (used), Year of construction: 2003, operating hours: 3,200 h, functionality: fully functional, fuel: diesel, Hammelmann HDP 232, 1000 bar, 110 liters, CAT engine, in very good condition! Dkodpfx Akoz E S Dmj Aow

Condition: used, Offered for sale is a laboratory ultrapure water system with digital controls. Control system: Digital control panel with LCD display and function keys. Equipped with a handheld water dispenser, flexible coiled hose and side-mounted filter cartridge. Inspection possible by arrangement. Dkedpfo Ad Np Dox Ak Aew

Condition: excellent (used), functionality: fully functional, Electric water heater Maximum power - 18kW Dedpfxsvbfvhe Ak Aokw

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 495 kW (673.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,550 kg, input voltage: 400 V, total width: 2,450 mm, total length: 5,050 mm, total height: 2,750 mm, input current: 170 A, input frequency: 50 Hz, Equipment: compressor, freezer, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller Capacity kW 491.9 Dsdpfot Tfbqjx Ak Ajkw Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

Condition: used, IKA LR 2000 V Laboratory Reactor For sale is a professional, modular IKA LR 2000 V laboratory reactor system in ready-to-use condition. This configuration is the ideal workhorse for product development, simulation, and small-scale production (e.g., in the fields of cosmetics, pharmaceuticals, chemistry, or food technology). Thanks to its vacuum compatibility and the combination of an anchor stirrer and a high-performance disperser, the system is perfectly suited for the production of stable emulsions, creams, and lotions. Here you will receive a complete, ready-to-use system. The expensive double-walled glass vessel with bottom outlet, the heating bath with temperature sensor, and the Ultra-Turrax T25 including shaft are already included in the package. You save yourself the tedious and costly individual purchases, which would amount to thousands of euros! Scope of delivery & technical components: Reactor vessel: Double-walled 2.0-liter vessel made of high-quality borosilicate glass 3.3. The jacket allows for precise heating and cooling via external thermostats. Equipped with a practical bottom outlet valve for clean emptying. Mixing tools: Integrated anchor stirrer for optimal wall scraping with viscous masses, as well as a suitable flow breaker to prevent vortex formation and for perfect vertical mixing. Djdpfxjz I Szwj Ak Askw Dispersing device: IKA ULTRA-TURRAX T25 including matching dispersing shaft. Enables highly effective homogenization and size reduction directly during reactor operation. Drive & control: Robust IKA control unit RE 162 P for powerful stirring even at low speeds. Temperature control: Water bath LT5 control including external temperature sensor. The sensor measures the temperature directly inside the reactor medium, which enables highly precise control via the water bath. Accessories: Complete stand system for the secure mounting of all components as well as all necessary holders. Note: The sale is without control software. The system can be fully, independently, and easily controlled directly via the hardware controls. "Everything from one source: We will gladly offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Water-air exchangers for heating warehouses and enclosed spaces. Djdpfs Ahgpxsx Ak Aokw They receive hot water which is exchanged through radiators and they send warm air into the environment. 3-4 models available.

Condition: used, Year of construction: 2017, functionality: fully functional, Rotox FWS 381 Dodpfx Akjzpygyo Aekw

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials Dkjdpfjyclvnjx Ak Asw

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, CARRIER 09VE 1064 WATER DRY COOLER – YEAR 2025 Industrial Carrier dry cooler featuring a V-shaped coil, two independent water circuits and axial fans. Supplied with a steel support frame, electrical control panel and DN 65 hydraulic connections. TECHNICAL DATA Manufacturer: Carrier Model: 09VE 1064 UI 1270A9B 12A1V1 CU Product reference: 7416018.702174 Serial number: 04136261/0001 Year of manufacture: 2025 Working fluid: Water Number of circuits: 2 Volume per circuit: 120 litres Djdpfxjzvf Ebe Ak Ajkw Maximum working pressure: 13 bar Maximum temperature: 110 °C Hydraulic connections: DN 65 Power supply: 400 V / 3-phase + N / 50 Hz Electrical power input: 35 kW Rated current: 46.8 A Weight: 1,340 kg PED: 2014/68/EU PED classification: Article 4.3, Group 2 liquid Certifications: CE, UKCA and EAC The unit is installed outdoors and available for inspection. The scope of supply includes the dry cooler and its electrical control panel.

Condition: used, Year of construction: 2014, functionality: fully functional, Güntner Axial Fan Condenser. Dkjdpfx Ajygyd Iok Aew Also suitable for water cooling. Other sizes of vertical and horizontal condensers are also available (also suitable for water cooling, pictures can be found in the ad). Located in Vacegres, Hungary (EU).

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 4,000 mm, total width: 2,550 mm, total length: 13,900 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 60 dB, input current: 150 A, energy consumption: 75 kWh, Equipment: documentation/manual, rotational speed infinitely variable, Mobile treatment system for digestate, slurry, and slaughterhouse wastewater Biogas plants and animal husbandry operations are facing increasing costs for the disposal and transport of liquid digestate and slurry. This system treats the wastewater on-site, separating it into clean permeate and a nutrient-rich concentrate. The permeate can be discharged, used for irrigation, or as utility water, and the concentrate can be used as fertilizer. The volume that needs to be transported is significantly reduced. The entire system is mounted on a trailer. It is delivered, connected, and put into operation. Foundations, buildings, or permits for permanent installations are not required. PROCESS 1. Pre-separation: equalization tank, peristaltic pump, two cyclones for the removal of sand and heavy solids 2. Ozone oxidation reactor: oxidative decomposition of the organic load with ozone directly in the water stream 3. Lamella separator: separation of coarse suspended solids 4. Microflotation (DAF): separation of suspended particles with microbubbles and ozone 5. Multi-layer filter: fine separation before the membrane stage 6. Reverse osmosis: open-channel modules with parallel spacers, up to 70 bar, very fouling-tolerant. The RO concentrate is returned to the DAF. RESULTS FROM PILOT OPERATION (Evaluation by the Fraunhofer Institute) Biogas digestate (decanter): - COD: over 20,000 mg/l in the influent, 12 mg/l in the permeate - Total nitrogen: 4,800 mg/l in the influent, 25 mg/l in the permeate - N removal: 99% Slaughterhouse wastewater: - COD: over 20,000 mg/l in the influent, 26 mg/l in the permeate - Total nitrogen: 2,750 mg/l in the influent, 120 mg/l in the permeate - N removal: 95% Pig slurry (separated): - COD: over 20,000 mg/l in the influent, 34 mg/l in the permeate - Total nitrogen: 2,500 mg/l in the influent, 180 mg/l in the permeate - N removal: 91% The values are from pilot operation and laboratory validation. We will determine the performance for your wastewater after a water analysis, and we can also offer an on-site trial run. YOUR ADVANTAGES - Reduced volume for storage, transport, and application Dkodew Uf Ihspfx Ak Aow - Permeate can be used for discharge, irrigation, or as utility water - Concentrate can be used as fertilizer - Mobile: can be used at different locations, trial run without investment - Energy-efficient ozone oxidation, power consumption per m³ on request - Fully automatic PLC control APPLICATIONS - Biogas plants: digestate treatment after the decanter - Pig and cattle farming: slurry treatment - Slaughterhouses and the food industry - Other industrial wastewater with high organic loads, after evaluation TECHNICAL DATA System type: mobile wastewater treatment, ozone oxidation + DAF + RO Design: 40-ft trailer Process stages: cyclones, ozone oxidation reactor, lamella separator, DAF, multi-layer filter, reverse osmosis RO modules: open-channel, 26.5 m² per module, up to 70 bar COD influent: over 20,000 mg/l (pilot) COD permeate: 12 to 34 mg/l (pilot) N removal: 91 to 99% (pilot) Control: PLC, fully automatic Electrical: 400 V / 50 Hz, connected load 75 kW, fuse rating 150 A MARKETING - Rental with or without operation - Treatment per m³: RIEFILT provides and operates the system; you pay per treated cubic meter - Purchase on request - On-site trial run possible to confirm the performance data NOTES ON THE INFLUENT For the design, we need an analysis of your wastewater (at least TS, COD, N-total, NH4-N, conductivity, pH) and the

Condition: used, Applicable material: Water Skid-Mounted Reverse Osmosis Water Treatment System Integrated industrial water treatment installation combining reverse osmosis, chemical dosing and associated tanks, pumps and instrumentation. Mounted on a stainless steel frame and equipped with a control cabinet featuring a Siemens SIMATIC HMI operator panel. System components: Reverse osmosis unit with horizontal membrane housings. Two dosing pumps. Air compressor. Buffer tank. Salt/brine tank. Associated pumps and pipework. Pressure gauges, flow meters and various valves. Electrical control cabinet with Siemens SIMATIC HMI. Stainless steel support frame. Dksdpfo Ahyhzox Ak Ajw Overall dimensions (L × W × H): approximately 3,500 × 1,300 × 2,000 mm. Online auction of detergent processing equipment, soap and powder manufacturing (e.g. SAGAFLUID mixer, AIRJET bag filters, paddle mixers, SIEMENS Milltronics weighing, VEGA level measuring etc.), many s/s storage tanks 5x 100m3, 3x 75m3 etc., workshop and spare parts, logistics, laboratory and offices due to partial relocation and plant closure of the renowned Lagarto Euroquimica at Zaragoza in Spain. The online auction opens Tuesday 3 November and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Tuesday 10 November - Monday 23 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Universal water temperature control unit with electric heating and connections for external cooling. Pressurized water temperature control unit, circulating process temperature control, heater, cooler, electric heating. SINGLE type STW 180/1-36-100-S Mfg. No.: 130568 Year of manufacture: 2013 Temperature max. 180°C Temperature range +20°C to 180°C Operating overpressure max. 6 bar Pump capacity 100 l/min. Tank volume approx. 22 liters (internal volume) Dsdpfx Akjz N H D Do Aokw Heating capacity 36 kW - direct injection cooling Pump motor power 1.1 kW Heat transfer medium water Circulating water supply + return DN 32 - G 1 1/4" Cooling water supply DN 20 G 3/4" Cooling water return DN 20 G 3/4" Connection power 41 kVA Rated current 57 A Control system SC Standard type R8200-S-1-SI1-0-6 Mains connection 400 Volt, 50 Hz. - Temperature control - An external cooling unit or an external cooling circuit is required for cooling (cooling is achieved through direct injection of cooling water into the cooling medium without a heat exchanger). - mobile on 4 rollers - Supplied without connection cable Dimensions L x W x H 1300 x 370 x 1150 mm Weight 200 kg Good condition

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Dkjdpfx Ao Aa Ngzjk Aew Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Dodpo Aa Nf Rsfx Ak Askw Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Dodpj Aa Ng Ijfx Ak Askw Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength detection and seamless integration with HPLC systems. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility Dkjdsy H Egvjpfx Ak Aew • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength Dkjdpsy H E Slsfx Ak Ajw detection and seamless integration with HPLC systems. Includes Waters e2695 Seperations Module Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Year of construction: 2005, PureWaterPlant / Pharmaceutical water treatment plant Make: LETZNER 400 ltr. / h with tank, piping, control box, etc. Dedpfxsmfnv Ss Ak Aokw with operating instructions, etc.