Used Wcl 5 for sale (59,342)

Condition: used, mileage: 19,700 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, first registration: 11/2003, next inspection (TÜV): 01/2027, emission class: euro3, color: beige, number of seats: 5, Equipment: ABS, all wheel drive, central locking, immobilizer system, parking heater, First owner. Only 19,700 total kilometers driven since new. Comes with service booklet. Last service in 2025 at 17,983 kilometers. Engine, transmission, and rear axle oil changed. Timing belt replaced. Tires also replaced at the same time; fitted with Semperit winter tires, DOT 2023/2024. Manufactured in February 2003 and first registered in November 2003. One of the last T4 Syncro models built. Long wheelbase. Hodpfxoyyfr Sj Af Asfk Originally, it was technically intended for factory installation to be registered as a standard passenger vehicle with 9 seats. However, this registration was immediately removed from the original vehicle registration document because the vehicle was always used as an operational vehicle. The actual registration type has always been "Other motor vehicle, water rescue operational vehicle." Currently, 5 seats are registered and actually present; all are robust and easy-to-clean synthetic leather seats. SORTIMO shelving is installed in the rear, which has been used for emergency equipment and clothing. Unladen weight according to documents: 2270 kg. Permissible total weight: 2890 kg. Overall dimensions of this VW T4: Length 5107 mm / Width 1840 mm / Height with special signals 2100 mm (without the flashing lights, it is 1920 mm). Sliding door on the right and rear wing doors. Dent on the lower left rear. All doors function smoothly and without noise. WEBASTO AirTop 3500D auxiliary heater. Ball hitch with 2000 kg towing capacity (braked) or 750 kg (unbraked). Maximum towing weight = 4500 kg. 2.5-liter TDI five-cylinder diesel engine. 2461 ccm. 102 hp. AXL. Starts immediately and runs perfectly. 5-speed manual transmission. Differential lock. ABS. Power steering. Airbags for driver and passenger. Central locking with remote control. 2 original VW keys with remote control are included. Electric windows and electrically adjustable exterior mirrors. 155 km/h is listed as the maximum speed. The T4 was recently driven to us without any problems over 600 kilometers on the highway. It runs excellently and is in good original condition. The TÜV (technical inspection) is valid until 01/2027. This offer is only valid for commercial businesses and freelancers of all kinds, as well as for authorities / emergency services. Unfortunately, sales to private end consumers are not possible. Subject to prior sale and errors. Price according to §25a UStG (differential taxation; VAT cannot be shown separately and is not added). The Syncro is available immediately.

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, number of seats: 30, gearing type: automatic, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, New vehicle without registration, immediately available with automatic transmission, double glazing, and auxiliary heating! 5x facelift model. The ideal school bus or small coach for groups with limited budgets. Built for Germany with double glazing, auxiliary heating, and a 24-month warranty, optionally extendable. 29 reclining seats with folding tables. ----General Vehicle Data: * Length 7,168 mm * Width 2,262 mm * Height 3,352 mm * Wheelbase 3,350 mm * Front/rear overhang 1,613 mm / 2,205 mm * Turning circle diameter 12,200 mm * Passenger capacity 29 + 1 * Permissible total weight 8,160 kg * Diesel tank volume 160 l * AdBlue tank 12 l Drive: * Type E6 MFTBC 4P10-HAT4 (Mitsubishi) * 4-cylinder in-line engine * Type automatic transmission * Emission standard Euro 6e * Displacement 2,998 cm³ * Power 110 kW / 150 hp at 3,500 rpm * Max. torque 370 Nm at 1320 rpm * Fire extinguishing system in the engine compartment Hodszuvfvepfx Af Ajfk Braking system and safety systems: * Disc brakes * EBS (electronic braking system) * ESP (electronic stability program) * ABS (anti-lock braking system) * ASR (traction control system) * AEBS (emergency braking assist) * LDWS (lane departure warning system) Climate / Heating / Ventilation: * Roof-mounted air conditioning system Safkar * Convector heating on the side walls * 1 roof hatch, manual operation * Auxiliary heater Eberspächer Doors: * Door 1, single-leaf, front * Door 2, single-leaf, rear * Control, electric Accessories: * Fire extinguisher 1 x 6 kg * First aid kit * Emergency hammer Our company has been on the market for 35 years. You can inspect and test drive the vehicles with us. You will be received at our company premises, and not in some random parking lot. Our business address is not just a mailbox in an apartment building. These mailboxes tend to disappear after a few months.

Condition: good (used), mileage: 233,610 km, power: 266 kW (361.66 HP), first registration: 09/2011, fuel type: diesel, tire size: 385 / 55 / R22.5, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 10,060 mm, total width: 2,550 mm, total height: 3,500 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 7,350 mm, loading space width: 2,490 mm, loading space height: 2,520 mm, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, power mirror, soot filter, trailer coupling, General information Cab: Comfort Cab Technical information Hodpoztxh Rsfx Af Asfk Number of cylinders: 6 Engine capacity: 12.902 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Make axles: DAF Brakes: disc brakes Front axle: Tyre size: 385 / 55 / R22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80%; Suspension: leaf suspension Rear axle 1: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Rear axle 2: Tyre size: 385 / 55 / R22.5; Lift axle; Max. axle load: 7500 kg; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: air suspension Weights Empty weight: 13.925 kg Carrying capacity: 14.075 kg GVW: 28.000 kg Functional Crane: HMF 2420 K3, year of manufacture 2011, behind the cab Sliding roof: Yes Interior Interior: grey Condition Technical condition: good Visual appearance: good Number of keys: 1 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Coupling - Hydraulic - Low-noise - Particulate filter - Power take-off (PTO) - Radio/CD player - Refrigirator - Remote central locking - Speed limiter - Stability control - Toolbox - Visor - Webasto

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Hfjdpfsyffqqox Af Aek Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: good (used), mileage: 709,747 km, power: 330 kW (448.67 HP), first registration: 04/2022, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, suspension: air, Year of construction: 2022, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, parking heater, power mirror, retarder, soot filter, spoiler, - Aluminum fuel tank - Brake booster - EPS - Low noise - Intarder - Particle filter - Radio/CD player - Sliding roof - Sleeper cabin - Side door - Auxiliary heater - Toolbox Suspension: Air suspension Front axle: Steered GVW: 18,000 kg Emission class: Euro 6d Technical condition: good Optical condition: good Reference number: 99 Vehicle number: 99 Mercedes Benz Actros 5 / 1845 / StreamSpace / Retarder / LowLiner Full Air / Eu6d .: W1T96340610566194 Suspension: Air / Air (Full Air) Transmission: Automatic Air conditioning Retarder Engine brake Cruise control Auxiliary heater Lane keeping assist Hsdpfxjzt Rfho Af Aefk Distance assist Navigation system Exhaust standard EURO 6d Wheelbase 3.70 m Special features: Ambient lighting LED, Work lights, Equipment package: Economy, Equipment package: Climate, Equipment package: Safety, CB radio, Air horns (2) on cab roof, Driving assistance system: High beam assist and cornering light, Cab: Tilting mechanism electro-hydraulically, Vehicle without MirrorCam exterior camera, Transmission 12-speed - Type: G 211-12, Fenders 3-piece, Fuel tank: Combination tank aluminum - 660 liters diesel + 75 liters urea solution (AdBlue), Cool box / refrigerator, Air deflector roof (lockable) and side, Engine brake reinforced, Rain sensor, Retarder, Fifth wheel coupling: low maintenance, Lock lubricated, Drawers under dashboard, Seat cover / upholstery: Co-driver seat velour, Seat cover / upholstery: Driver seat velour, Seats in cab: Driver seat comfort suspension seat, Sun visor outside, Steel rims 11.75x22.5 (on front axle), Stowage flap outside left, Socket 12V / 15 A in co-driver footwell additionally, Socket 12V additionally, Socket 24V in co-driver footwell additionally, Socket cab 24V, Curtain sleeper cabin Other features: Exhaust standard EURO 6, Storage compartment above windshield with cover, Axle configuration: 4x2, Axle load front axle 8.0 t, Actros 5, Actros cab L, Approach / front mirrors heated, Trailer electrical and brake connection low, Trailer socket 24V / 15-pole, Step at cab left, Exhaust to the right outside, Equipment package: Powertrain 2, Differential lock rear axle, Torque increase 12th gear, Compressed air connection in cab, Compressed air tank steel, Compressed air unit with condensate monitoring, Compressed air unit medium, Automatic switch-on for driving lights (light sensor), Driving assistance system: Attention Assist (fatigue detection sensor), Driving assistance system: Autonomous emergency braking assistant (Active Brake Assist 5), Driving assistance system: Lane keeping assistant, Cab: Cab entrance fixed, Cab: Interior package chrome, Cab: L StreamSpace, 2.50 m, Floor flat, Cab: steel-sprung, Comfort, Vehicle outline lights LED, Suspension: Air / Air (Full air), Window lifts electric, Vehicle without rear window, Generator 100 A, regulated, Speed limiter, Rear axle with active lubrication, unregulated, Rear axle ring gear 440, Integral rear, Body/superstructure: Semi-trailer tractor, Comfort bunk lower, Comfort locking system, Steering pump electronically controlled, Steering wheel with multifunction, Air intake behind cab, Air compressor 2-stage, Air dryer heated, Engine 12.8 L - 330 kW R6 diesel (OM 471), Engine variant OM 471, Type of use: Local transport,...

Condition: used, mileage: 348,154 km, power: 92 kW (125.09 HP), fuel type: diesel, gearing type: mechanical, first registration: 02/2013, emission class: euro5, color: other, number of seats: 17, Year of construction: 2013, Equipment: ABS, cruise control, navigation system, Height: 250 cm Damage: none = Company Information = Hfodpfxeztvilo Af Aek We are an international company based in Belgium, in the vicinity of Brussels (+/- 20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses and has an extensive parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, and models in stock, covering every price range. We can find the right tourist, school, or city bus for you, tailored to your needs or budget. All information is without guarantee. Errors, prior sale, and typographical errors excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku, Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: used, Year of construction: 2012, machine/vehicle number: SO141, Used MORETTO EPL 5-8 N blow molding machine - Year 2012Technical Specifications & Performance DataThis extrusion blow molding machine is engineered for producing hollow plastic containers with high repeatability and efficiency. Manufactured by Magic with a full-electric drive concept, it is equipped for industrial packaging and beverage production environments where precision, uptime, and energy efficiency are critical. It suits used bottling line upgrades and second hand equipment integrations requiring robust blow molding capabilities.Blow molding process: Extrusion blow molding, full electricMaximum blown container volume: 8000 cm³Clamping force: 100 kNSpeed: around 200 Unit/hour for ( Distilled water container ) Dry cycle time: 2.2 sOpening stroke: 250 mmMaximum mold dimensions (L × P × A): 425 / 2x130 / 400 mmGeneral electrical power: 15 kWTotal installed electrical power: 64 kWExtruder screw diameter: 70 mmExtruder L/D: 24 L/DExtruder motor power: 35 kWExtruder heating zones: 5Extruder heating power: 10.6 kWSingle extrusion head max die diameter: 100 mmHead heating zones: 4Head heating power: 3.8 kWMachine footprint (W × L × H): 1900 × 5050 × 3250 mmTotal system weight: 7000 kgNoise level: 75 dB(A)Advanced Automation & Control SystemsThe full-electric architecture enhances precision and repeatability while minimizing energy consumption and maintenance compared to hydraulic systems. Fast dry-cycle performance supports higher throughput and stable cycle times. Temperature control across multiple heating zones on the extruder and head ensures consistent parison quality and stable process control for demanding industrial packaging applications.Full-electric drive for efficient, clean operationMulti-zone temperature management on extruder and die headStable, repeatable dry cycle for consistent productionOperator-friendly adjustments and setup for mold changesProcess reliability suitable for stringent quality requirementsProduction Line Integration CapabilitiesThis machine integrates smoothly within a used bottling line or a mixed-manufacturer production environment. It comes with a comprehensive set of auxiliaries to streamline upstream and downstream handling, supporting end-to-end beverage production or industrial packaging workflows.Included auxiliaries: hopper feeders, suction unit, dryer, granulator, cooler, color mixer, conveyorsAuxiliaries brand: Moretto (most components purchased new in 2012)Inline or standalone operation for flexible layoutsSupports diverse container geometries enabled by robust clamping and mold size window... Hfodpfxjzrgqke Af Ask

Year of construction: 2006, condition: ready for operation (used), Travels X/Y/Z: 885mm/600mm/600mm, travels B/C: -10° - 110°/360°, rapid traverse X/Y/Z: 9000mm/min, speed: 28000rpm. Table dimensions X/Y: 950mm/650mm, operating hours: 90711h, spindle hours: 19457h. Including workpiece measuring probe, tool changer with 100 places. Hfodpfx Ajta H S Ssf Ask

Condition: ready for operation (used), Year of construction: 2009, Travel ranges working area 1: X: 6450mm, Y: 1535mm, Z: 250mm, working area 2: X: 6200mm, Y: 1535mm, Z: 250mm, working area 3: X: 6200mm, Y: 1520mm, Z: 275mm, axis travel configuration 1: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 2: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 3: X: 6820.5mm, Y: 1963mm, Z: 663mm (5-axis head), Z: 350mm (additional machining units), control: Biesse XP600. Maintenance: complete C-axis was replaced in 2015 including accessories, vacuum pump was fully replaced in 2016 including bellows, hoses and additional components, in 2021 the machine was equipped with a new high-performance control PC running a current Windows 10 operating system. With extensive documentation. An on-site inspection is possible. Hodpeylziijfx Af Ajfk

Year of construction: 2003, condition: ready for operation (used), An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible. Hodpfjvva Hkox Af Aefk

Condition: ready for operation (used), Year of construction: 2016, A total of three similar-design stickpack and sachet packaging machines Josef Blazek are available. Lanes: 5, years of manufacture: 2008/2009/2016, products: powders/granulates/bulk solids, bag sealing: 3-sided, max. film width: 220mm, bag width range: 10mm-48.5mm, bag length range: 50mm-130mm, cycle rate: 50cycles/min. The machine with the year of manufacture 2016 is equipped with a feed screw. Documentation available. An on-site inspection is possible. Individual sale possible. Hfsdpjzcp Uzsfx Af Ask

Condition: ready for operation (used), A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment. Hfodpfxjzcyq Ho Af Ask

Condition: ready for operation (used), Year of construction: 2001, A Fischer CNC 5-axis multi-machining center is available. Spindle power: 7.5kW, spindle speed: 18000rpm, tool positions: 12, clamping elements: 8, working length: 7000mm, clamping stroke: 60mm, clamping range: 380mm, max. spindle tilt: 90°, stop stroke: 60mm, stop width: approx. 250mm, tool holder: HSK-40E, max. saw blade diameter: 200mm, machine dimensions X/Y/Z: approx. 8200mm/2450mm/3200mm. Documentation available. An on-site inspection is possible. Hsdpfxezdumqe Af Asfk

Year of construction: 2024, condition: ready for operation (used), A Cleveland dressing and profiling machine for machining diamond and CBN grinding wheels is available. Dressing process: dry, max. single wheel dimensions X/Y: 400mm/30mm, max. wheel package dimensions X/Y: 150mm/150mm, grinding spindle diameter: 80mm, wheel flange bore: 32mm. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/2000mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible. Hsdpfxszhb Euo Af Aefk

Year of construction: 1999, condition: ready for operation (used), A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible. Hjdpeygmc Defx Af Aofk

Year of construction: 2000, condition: ready for operation (used), Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible. Hodpjzadmgjfx Af Aefk

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Hfodpfx Aezavyfsf Ajk

Condition: ready for operation (used), There are 15 identical loading systems available. Product-contact parts made of stainless steel 1.4301, outlet diameter: 400mm, nominal diameter: DN 300, extended length: 5237mm, retracted length: 1252mm, telescopic length (stroke): 2885mm, max. loading capacity: approx. 50t/h, connected load: 0.55kW, weight: 245kg. An on-site inspection is possible. Hfjdpfx Asy Tn Ngjf Ajk

Condition: ready for operation (used), Year of construction: 2007, A Schüco roll crimping machine for joining aluminum half-shells with polyamide insulating bars in thermally broken profiles is available. Profile throughput speed: approx. 34m/min, max. profile installation depth: 250mm, max. profile height: 400mm, max. insulating bar spacing: 300mm, machine dimensions X/Y/Z: approx. 900mm/900mm/1650mm, weight: approx. 750kg. Including infeed and outfeed. Documentation available. An on-site inspection is possible. Hedpfoyugm Eox Af Asfk

Condition: ready for operation (used), Year of construction: 2017, A textile screen printing machine Hebbecker including intermediate dryer and drying tunnel for the complete process is available. 1) Textile carousel screen printing machine Hebbecker S-Line-5-8-4040, year of manufacture: 2017, printing units: 5, stations: 8, max. print dimensions X/Y: 400mm/400mm, plate adjustment: +/-80mm, squeegee length: 410mm, machine diameter: approx. 2900mm, machine height: approx. 1900mm. 2) Infrared conveyor dryer M&R Economax D, year of manufacture: 2017, belt width: 610mm, heating chamber length: 1140mm, cooling system: CoolSkin. 3) Intermediate dryer Hebbecker Magic 25, year of manufacture: 2017. Documentation available. An on-site inspection is possible. Hfsdjy Hvqxopfx Af Ask

Year of construction: 2008, condition: ready for operation (used), Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible. Hfodpfsx S Rbpsx Af Aok

Condition: ready for operation (used), Year of construction: 2004, Travel X/Y/Z: 700mm/630mm/700mm, max. workpiece dimensions X/Y: 750mm/700mm, pallet clamping surface X/Y: 500mm/500mm, max. pallet load capacity: 500kg, tool holder: SK40, feed rate: 50m/min, rapid traverse: 50m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.001mm, spindle speed: 12000rpm. Machine dimensions X/Y/Z: approx. 4000mm/3800mm/3000mm, weight: approx. 12500kg, control: Fanuc Series 21i-MB, operating hours: approx. 42400h, spindle hours: approx. 11500h. Includes Renishaw OMP 40-2, central lubrication, and 4 pallets. Documentation available. On-site inspection possible. Expected to be available from January 2026. Hsdpfx Afexuvpbs Ajfk

Condition: ready for operation (used), Year of construction: 2017, A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensions X/Y: approx. 15000mm/8000mm, weight: approx. 20000kg. Documentation available. On-site inspection is possible. Expected to be available from the end of September 2025. Hodpfx Aew Azuzof Aefk

Condition: ready for operation (used), Year of construction: 1996, Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control: Zeiss C90, touch probe: PH6/TP6, max. measuring deviation: 3.6+L/250µm, max. angle error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Hfedpfjwzldwsx Af Ajk

Year of construction: 2009, condition: ready for operation (used), Equipment: height-adjustable conveyor, lid sorting and feeding system, conveyor belt with infeed and outfeed section, stainless steel construction, safety enclosure with interlocked safety doors, integrated electrical control cabinet and operator panel, the machine is designed to process Pano TO 100mm PP HOmao closures without liners. Inspection on site is possible. Hfjdozhw Tnopfx Af Ajk