Used Web Offset for sale (1,395)

Condition: new, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loaded loading height approx. 890 mm, 24 lashing rings each 10 t, 12 stake pockets in the outer frame, drive-on ramps (approx. 3,100 x 750 mm), climbing strip on the outside of the ramps and rear slope, drive-on ramps adjustable sideways, 68 mm thick wooden floor, storage box with lid for lashing chains or tension belts, contour marking according to regulations, rotating beacon, vehicle hot-dip galvanized, -- Errors, misprints, and changes reserved, sample images --, More data at: !, More Details: ! Cedpfx Ako Aawknj Ajri

Condition: used, empty load weight: 4,850 kg, maximum load weight: 14,150 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 05/2015, loading space length: 5,540 mm, loading space width: 2,420 mm, loading space height: 660 mm, loading space volume: 8 m³, suspension: air, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Air-suspended, tires: 435/50 R 19.5, 600 mm drop sides, 10 x lashing eyes, , surcharge for, aluminum ramps Price: 850 ¤, , customer vehicle , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Csdpe Agfnlefx Ak Asri

Condition: new, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,120 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55 R 19,5, color: other, gearing type: other, front tire size: 385/55 R 19,5, rear tire size: 385/55 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, side boards 600 mm high, galvanized, loading height approx. 990 mm, 4 x lashing points in the floor, each with a capacity of 5 tons, 8 x lashing points in the floor, each with a capacity of 3 tons, reinforced gearbox support winch with load and fast gear at the front, wide tires: 385/55 R 19.5, chassis: hot-dip galvanized. Additional cost for: aluminum ramps (approx. 3,520 x 400 mm), load capacity per pair 10 tons and 2 folding supports at the rear. Price: 1,900 euros. Cedpj Agt Hlofx Ak Ajri Printing errors, errors and changes excepted, sample images. More details: !

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 45 m³, Year of construction: 2026, Equipment: ABS, Chassis material: Aluminum Fifth wheel coupling, kingpin: National (t) 12 Axle load: National (t) 8 Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1175 Chassis width (mm): 1400 Loading width (mm): 2475 Internal height, front (mm) (IHF): 2165 Internal height, rear (mm) (IHB): 2165 Loading length (mm): 8486 Overall width (mm): 2550 Wheelbase (mm) (WB): 5800 Overall length: 10,300 Axles, brakes, and suspension Axles: JOST Brake type: Disc brake Brake type: JOST - DCA-T7 (Knorr Bremse) Offset (ET): 120 Option: 1st axle with lift axle and starting aid Starting aid activation: Via button in the truck and by pressing the brake pedal three times Brake pad wear indicator: Connected Air suspension: ECAS with lifting and lowering valve European Palm coupling Type: Smartboard Standard Air and electrical console: Centrally mounted on the driver's side As a steel gear support winch, type Weweler, with compensating springs, single-sided operation, and 2 speed stages Tire size: 385/65R22.5 Tire pressure monitoring: Wabco Trailerpulse Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nuts: Open Wheel nut covers: Chrome with STAS Cjdpfs Agxxyex Ak Aori Manufacturer: Lighting ECOLED III - with STAS logo Work lights (operated via switch): With Position of work lights (operated via switch): 2 pcs. LED rear work lights (controlled via reverse signal) Operation: Underrun protection - Manually Towing eye: 1 pc. on the left Splash guard: Underrun protection - Black with STAS logo, mounted across the entire width of the underrun protection Cover: Underrun protection - With covers Handle: Underrun protection - Handle Hydraulics Manufacturer: Tipping cylinder - Edbro Type: Tipping cylinder - Hydraulic cylinder with small housing Cylinder tipping angle: Normal ±47° Model: Tipping cylinder - Edbro - CS18 Stroke: Tipping cylinder: 6733 Tipping cylinder max. pressure: 190 Surface treatment of the cylinder stages: Standard surface treatment Hydraulic coupling: Size 1 Hydraulic coupling: Gender - Female Hydraulic coupling: Hose 2,500 mm Suspension of the hydraulic hose with springs: Yes Number of splash guards on the fender: 2 pcs. Type: Splash guard - Fender - Asphalt Toolbox: In front of the axles, plastic Dimensions: Toolbox - Right in front of the axles: 860x520x500 Aluminum extension ladder: 3 m - right Mounting: Extension ladder for rear access - With hooks for hanging Position: Broom and shovel holder - With 3 holders each, mounted on the chassis on the driver's side Plastic shims: With two plastic shims incl. holder Anchoring device: Chassis - Superstructure Inclination: Front wall (°): 20 Inclination: Rear wall (°): 20 Inclination of the lower profile inside (°): 45 Front wall: 4 mm (Aluminum) Profile: Side wall - 3 mm - 2 mm, smooth design inside and outside, double-walled profiles 600 mm wide - 30 mm thick Floor: 8 mm Aluminum - 110 Brinell Position: Rubber pads - Rubber pads attached below the floor crossbeams Rear door Rear wall: Type - Hinged flap Rear wall: Aluminum Type of hinged flap: Straight design with planks Type of hinges: With double door hinge (double-joint hinge) Sliders: Rectangular design, standard Slider position: 1 slider, with operating handle, in the center on the driver's side Fastening of the open door flap: Door latch for hinged flap, positioned on the right on the driver's side Sealing: Rear wall - With rubber sealing completely around (LL sealing) Rotating locks: 4 toggle locks (left, right and 2x bottom) A

Condition: used, empty load weight: 9,318 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 13,410 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2017, Equipment: ABS, Poids à vide: 9318kg, Poids total admissible: 38000kg, Espace de charge (L L H): 13.410 mm x 2.460 mm x 2.650 mmLa taille du pneu: 385/65 R22.5, Volume espace de charge: 87 m³, 1er essieu: , 2ème essieu: , 3ème essieu: , Suspension pneumatique, Dispositif anti- encastrement, Coffre à palette, Système de freinage électronique EBS, Porte-extincteur, Châssis boulonné, Portes battantes conteneur, Cloison ISO sans ventilateur, Enregistreur de température, Fiche de raccordement 1x15 et 2x7 broches, Anti-spray, Scellés douaniers internationaux, Système de télématique, Disques de frein Essieu 1 43,00mm Plaquettes de frein Essieu 1 80% dusureDisques de frein Essieu 2 43,00mm Plaquettes de frein Essieu 2 60% dusureDisques de frein Essieu 3 43,00mm Plaquettes de frein Essieu 3 50% dusure, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télématique.Nous serons heureux de vous conseiller personnellement. Credpfx Aks Afqx Nj Aoi

Condition: used, Year of construction: 2008, Approx. 63 million prints Prinect Classic Center Remote adjustment of circumference, page, and diagonal registration Alcolor Autoplate Static Star Baldwin Basic 3 dampening system Cjdpfs Ad Ix Rjx Ak Ajri All washing devices Alphatronic 200 powder sprayer PrePress Interface via CIP 4 Interface Available on short notice

Condition: used, mileage: 225,000 km, power: 130 kW (176.75 HP), first registration: 03/2022, fuel type: diesel, empty load weight: 2,300 kg, overall weight: 3,500 kg, axle configuration: 4x4, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 5,986 mm, loading space length: 4,330 mm, loading space width: 2,100 mm, loading space height: 2,480 mm, construction height: 2,590 mm, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, sliding door, soot filter, trailer coupling, AUTOPARADIES in Berlin, Frank-Zappa-Str. 9A Mon-Fri 9:00 AM - 5:00 PM Sat 10:00 AM - 1:00 PM Tel: Mobile/WhatsApp: VEHICLE FINANCING & TRADE-INS POSSIBLE MAN TGE 3.180 4X4 AUTOMATIC * AIR CONDITIONING Crode Ahftvspfx Ak Aji * Rearview camera * Suspension seat for driver + passenger and 2 armrests (ErgoActive) * ON-BOARD COMPUTER * DAB radio * Radio with Apple CarPlay and Android Auto * Webasto auxiliary heater with remote control * Hands-free system Bluetooth * Exterior mirrors, electric * Power windows * 3-seater truck (all with 3-point seatbelts) * Lined cargo area * DPF - EURO 6 * Electronic immobilizer * Tow hitch 3000KG * Permissible total weight 3500KG Vehicle is in good condition. Please call to schedule a test drive. Subject to prior sale and errors. Call us! We speak English. Financing, Trade-in, More offers can be found on our website. The information provided in advertisements, on the internet, on price tags, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller also assumes no liability for errors arising from typing, spelling, or data transmission errors. The listed equipment may need to be checked separately. Please understand that, although the technical and optical condition of this vehicle is good, due to its age and mileage, we prefer to sell it to commercial customers or for export, excluding any warranty. Thank you very much! The vehicle description serves only to generally identify the vehicle and does not constitute a guarantee in the legal sense of purchase. The information does not claim to be complete and is not considered a guaranteed characteristic in the sense of § 434 BGB paragraph 1 sentence 3. Errors and prior sale are reserved.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,800 kg, maximum load weight: 27,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl trailer according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis Heavy-duty HANGLER welded construction made of high-quality steel with tapered welded main beams and reinforced neck section with double centre web. Punched Z-profile cross members with welded side frame. Replaceable 2" kingpin with chamfered skid plate. 18 pairs of recessed lashing rings (2.5 t each) and 8 pairs of recessed folding lashing rings (5 t each). 24 t two-speed landing gear, one-side operation. 2 wheel chocks with holders. Aluminium side underrun protection. Plastic mudguards in front of and behind each axle with anti-spray mud flaps. Rear underrun protection and full-width rear mud flap. Approx. 8,000 mm covered coil well divided by approx. 40 mm inclined loading beams. Stake pockets and supports for FR 80/80/4 stakes, fully hot-dip galvanized. 80/80 plug-in stakes with reinforced lower section. Hydraulic inclined loading system with 4 cross beams. Hydraulic supply via tractor through a 2-line hydraulic system (pressure/return) with double Faster couplings. Inclined loading beams with integrated height-adjustable telescopic extensions. Multi-stage hydraulic cylinders with universal joints. Adjustable supports with locking pins. Cylinder openings protected by strip brushes against dirt and weather. 5-function control valve for inclined loading system and folding mechanism. Sliding roof system with tarpaulin apron cover. 1 tank-end support set with height-adjustable support pins for different tank diameters, including storage bracket. Front impact stop for inclined loading platform. # Axles + Suspension Disc brake axles Offset axle spacing 1,310 / 1,450 mm Air suspension # Brake system Dual-line compressed air braking system Aluminium air tanks Spring parking brake Axle load detection via EBS CAN bus Tyre Pressure Monitoring System (TPMS) according to ECE R141 with display in the towing vehicle via EBS # Wheels and tyres 435/50 R19.5 tyres # Electrical system 24 V electrical system Multi-chamber lighting Yellow LED side marker lights Flashing LED side marker lights synchronized with turn indicators 2 × 7-pin and 1 × 15-pin front sockets Crjdpfx Akoi Riw He Asi Additional 7-pin rear socket (ISO 1724) integrated into the underrun protection Double LED illuminated warning panels, extendable to 3,000 mm, removable with plug connection LED rotating beacon with holder, switched via parking lights # Floor Approx. 30 mm phenolic plywood floor, flush-mounted with the side frame # Front wall Fixed aluminium hollow-profile front wall, approx. 2,400 mm high, with timber slats above. Interior reinforced with 3 mm aluminium wear plate up to approx. 630 mm from floor level. # Posts 2 fixed front volume corner posts, approx. 2,400 mm high 3 pairs of Kinnegrip centre posts, approx. 600 mm high, with Kinnetop extension to approx. 2,000 mm 1 pair of removable and foldable rear corner posts made of aluminium hollow profiles, approx. 600 mm high, reinforced internally up to the first slat row Integrated curtain bow recess with two rows of curtain bows. # Roof EDSCHA Profi 95 sliding roof system with straight roof frame and steel scissor mechanism for full curtainsider tarpaulin. Mechanically adjustable roof.

Condition: excellent (used), Splash guard Diameter 390 mm Wheel offset 6 Bolt circle diameter 135 mm Cjdpefm Tqzjfx Ak Ajri Weight 56 kg

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Crodofbt Huspfx Ak Aei Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Quill stroke: 325 mm Swivel range of the arm: 360° Traverseable on bed, bed length: 7500 mm Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition

Condition: used, Wölco Lupo VPAB-53 Labeling Machine Fully automatic labeling machine for professional labeling Wide-belt multi-labeler Manufacturer: Wölco Machine Type: Lupo VPAB-53 Year of Manufacture: 2011 Connection: 400V Current: 3 x 16 A Power: 2.5 kW Air: 6 bar Wide-belt multi-labeler Wölco Lupo VPAB-36 Manufacturer: Wölco Machine Type: Lupo VPAB-36 Year of Manufacture: 2011 Connection: 400V The Lupo VPAB-36 is the ideal machine for continuous industrial operation when precise and variable label printing with position-accurate application is required. Sato S84 ex Label Printing System The SATO S84-ex/S86-ex printer is a very powerful, automated label printing system with a user-friendly design and a wide range of functions. This printer, with its robust design, is designed for continuous operation. The main features of the printer are: • Two-color LCD backlight and two-color status LED for optimized monitoring of the printing status • Robust design for harsh environments • Very fast printing speed with a maximum printing speed of 16 ips and adjustable speed control for retraction Cjdpfx Aeh N Sa Rek Ajri • The printhead can be easily replaced without tools • Newly developed sensor cover with a non-stick surface that can be easily removed and cleaned without tools • Easy loading/unloading to/from an SD card or USB storage device without using the SATO "All In One Tool" application • Supports external printer settings via the SATO "All In One Tool" application or a web browser • Supports a multilingual display menu and the printing of Asian fonts • Supports emulations in standard firmware • Supports various communication interfaces • Supports the SNTP protocol ?v=8RXShKhNsD4&list=PLIoSzgIDE9Judwq07lJFUJWOHG7dJPyms More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Soft clamping jaws Manufacturer: Schunk Type: SFA 400 (28320) Length: 180 mm Cedpfeivzb Rex Ak Aori Width: 50 mm Height: 73 mm Groove width: 18 mm Web width: 30 mm

Year of construction: 1998, condition: excellent (used), Max. roll diameter, unwinder: 750 mm (Shaft 76) Cedpfx Aszn Ayyjk Ajri Max. roll diameter, rewinder: 320 mm Max. web width: 270 mm Description: Unwinder, splicing table, 2x web guiding system, cutting unit, rewinder, counters (meters), Nikka camera Camera Manufacturer: Nikka Research Deutschland GmbH Type: ALIS C2 Date: 2005 Description: Since May 13, 2026, the camera has only been working intermittently (outdated hardware). Although it could be repaired, the chances of success are low; the manufacturer recommends installing a new camera system. Accessories: 1x Shaft rewinder 76 mm 1x Shaft rewinder 40 mm 1x Shaft rewinder 50 mm 1x Shaft rewinder 100 mm 10x Razor blades

Condition: used, Year of construction: 2006, HEIDELBERG PM 52 - 4 ref. No. 26032 Cjdpfxo Agnuxj Ak Asri Sheet-fed Offset Printing Machine Production Year 2006 • Number of Colours: 4 • Counter: 51 mil. impressions • Max. Size: 370x520 mm (14,6"x20,5") • Max. Speed: 13000 imp./hour • Dampening: alcohol - Alcolor • Refrigeration device: Baldwin • Perfecting: NO • Remote control: ink and register - Press Control • Plate loading: semi-automatic plate - EasyPlate • Automatic wash up device: ink rollers, impression cylinders, blanket cylinders • powder sprayer: Medi Print • maximum printing area: 360 × 520 mm • material thickness: up to 0.4 mm • automatic sheet feeder • automatic sheet delivery • central lubrication • CE safety equipment • Classic Center • CIP3/DIPS interface • electronic job storage • power supply: 3 × 400 V / 50 Hz • ultrasonic double-sheet detector • Availability immediately Sale Reason closing company Condition of the Machine very good condition, well maintained, worn out according to its agecan be seen running Price on request

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition Crodpsqa Txqsfx Ak Asi

Condition: new, Year of construction: 2026, Weima Hacker / Shredder WL 8 with Top Features - 2nd knife row, log spacer, 4-sided segment base, discharge auger with gear motor, Fast reverse hydraulics with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used, for example, thousands of times in woodworking companies worldwide. The high number of these highly sought-after shredders guarantees proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures extremely high durability (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally adapted to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components – for example, from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging due to self-cutting hopper design The hopper performs several tasks at once. First, the material to be shredded is fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is crucial for the shredding process. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas spring are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robust due to its extreme stress during the shredding process. To prevent dust or foreign objects from entering it, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): 15/20 mm or according to customer requirements Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Accessories: Codpepdqzxsfx Ak Asri - 2nd knife row - Log spacer - 4-sided segment base - Discharge auger with gear motor - Fast reverse hydraulics with shock valve - Screen size 15/20 mm List price: €52,320, sold at a special price Location: In stock at 54634 Bitburg - available immediately - The pictures show a machine without a discharge auger; one will be available in stock.

Condition: used, machine/vehicle number: 159, empty load weight: 5,600 kg, maximum load weight: 26,400 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 09/2001, loading space length: 7,000 mm, loading space width: 2,320 mm, loading space height: 1,380 mm, loading space volume: 22 m³, suspension: air, tire size: 385/65 r22,5, color: black, Equipment: ABS, Drum brake Wheelbase 1,380 mm with steel insert Level compensation left/right BPW axles Errors excepted Crodpfjn Sl Hpex Ak Aei

Condition: used, mileage: 117,197 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Tachograph version 4.1, rolling lock MAN EasyStart, ASR, ESP, lane return assist LRA, EBS, LED lighting, electric parking climate control, attention warning, preparation for reversing camera, retarder Eco Cool, full brake assist, without reversing warning, 2kg fire extinguisher, MAN mediasystem Navigation Advanced 7'', navigation map Europe and Russia, attention warning system MAN Attention Guard, RIO Box, JOST JSK 42 K0 2 fifth wheel coupling, 150 mm mounting height, 575 mm fifth wheel offset Csdomhc I Ropfx Ak Asri

Condition: used, mileage: 722,540 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Vehicle equipment and technical details: General information: * Chassis type: S 500 A4x2EB * VIN code: YS2S4X20005553872 * Maximum permissible gross vehicle weight: 18 tons ---- Technical data: * Product class: Truck * Wheel configuration: 4x2 * Wheelbase: 3600 mm * Chassis width: 2600 mm * Chassis height: extra low * Front axle load, technical: 7500 kg * Rear axle load, technical: 11500 kg * GVW, legal: 18,000 kg * GVW, technical: 44,000 kg * Maximum permissible gross vehicle weight, technical: 19,000 kg * Emission level: Euro 6 * Engine: DC13 155/500 hp, 368 kW (500 hp), displacement: 13 liters * Transmission: GRS905R, Opticruise, TMS2 * Retarder: Scania R3500 * Front axle tire size: 355/50 R22.5 * Rear axle tire size: 295/60 R22.5 * Rim material: Aluminum * Front axle rim type: 22.5x11.75 Aluminum Alcoa DuraBright * Rear axle rim type: 22.5x9.00 Aluminum Alcoa DuraBright * Braking system: EBS7, electronic, ABS/EBS: 4S/4M * Hill hold: available * Air tank capacity: front 70 dm³, rear 30 dm³ * Suspension system: Air suspension front and rear, extra low air suspension height front * Leveling system: fast, truck and trailer * Steering gear: ZF 8098, ratio: 17-20:1, adjustable steering wheel (tilt + slide) * Speed limiter: 89 km/h (legal 90 km/h) ---- Cab: * Type: CS, length: 20 dm, roof height: high * Color: Ebony Black * Windshield: tinted, with rain sensor * Air conditioning: automatic, with auxiliary heater (WTA cab heater 3 kW) * Sunroof: electric * Cab mounting: Air Comfort * Driver and passenger seat: Premium, leather black, driver's seat with adjustable backrest and seat ventilation * Lower bunk: extendable from 800 to 1,000 mm, mattress: pocket spring * Upper bunk: width 700 mm, with safety net * Bluetooth: available * Navigation: with topographical map data for Europe * Audio system: AUS4 * USB ports: dashboard, passenger side, driver and passenger side, rear wall * Headlights: LED, fog lights: LED (3 diodes), daytime running lights: LED * Rearview mirrors: electrically adjustable and heated, spherical, driver/passenger side * Storage compartments: driver/passenger side, refrigerator box rear lower on driver's side, drawer rear lower passenger side ---- Additional equipment: * Fifth wheel coupling: +GF+ SK-S36.20 2/128, position: -510 mm * Mounting plate: 22 mm, D-value max 152 kN * Rear splash guard: plastic, length 96 mm * Spray suppression device according to EU 109/2011: included * Front mirror: electrically adjustable and heated * Horn: compressed air 118 dBA * Trailer brake coupling: ISO type, 1x15-pin connector ---- Certificates: * Advanced Emergency Braking: E4 - 131R - 010008 EXT.05 * Lane Departure Warning System (LDWS): E4 - 130R - 000010 EXT.04 * Speed Limiter: E4 - 89R - 000069 EXT.13 ---- * Front axle tire dimension: 355/50R22.5 * Rear axle tire dimension: 295/60R22.5 * Fuel tank: 450 + 450 liters * AdBlue tank: 96 liters * Technical total weight: 19000 kg * Tare weight: 8227 kg * Permissible trailer load: 26470 kg * Total length: 5810 mm * Wheelbase: 3600 mm * Next inspection due: 07.2027 * Engine operating hours: 12513 hours ---- Vehicle number: 11934 ---- Errors and prior sale excepted Crsdpfx Akeyv Uh Ij Aoi ---- Advertisements and various lettering have been digitally removed. ---- We will gladly assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you, for an additional fee...

Year of construction: 2018, condition: used, This listing is for a Solaris Biotech Solution Jupiter 3.0 Fermentor. The unit is in full working condition and is ready for immediate release. The Solaris Biotech Solution Jupiter 3.0 Fermentor is a highly versatile and configurable bioreactor system, ideal for laboratory-scale applications. With advanced automation and robust design, it caters to a wide range of research and development needs, as well as small-scale production. Key Features: Autoclavable and Sterilizable Design: Ensures ease of cleaning, sterility, and reliable operation for contamination-free processes. Cedpfexxz T Hsx Ak Aeri Flexible Vessel Options: Available in various aspect ratios and thermoregulation designs, with total volumes ranging from 2.0 L to 10.0 L. Pressure Control: Handles pressures up to 1.6 bar in the 2 L and 4 L jacketed vessels, with continuous gas-in and gas-out flux. Innovative SCADA Software (LEONARDO 3.0): Provides automated management of fermentation and cultivation processes, ensuring precision and ease of operation. Parallel Management: Supports simultaneous operation of up to 24 units via a single HMI with a 24” display, streamlining complex workflows. Remote Access: Enables monitoring and control via PC, tablet, or smartphone, using QR code scanning or a dedicated web portal for remote convenience. Applications: Process Development and Optimization: Facilitates experimentation and optimization of bioprocesses for scale-up and scale-down studies. Education and Research: Suitable for educational purposes and basic research in bioprocessing. Small-Scale Production: Supports small-batch manufacturing and pilot-scale processes. Benefits: Cost-Effective Performance: Combines advanced features with affordability for laboratory and production environments. High Level of Automation: Simplifies management of fermentation and cultivation with LEONARDO 3.0 software, reducing operator workload. Versatility and Configurability: Adaptable to a wide variety of applications, ensuring compliance with validated GMP regulations. Technical Specifications: Material: VALOX resin (external) and silicone (internal) Autoclavable: 121-133°C for up to 30 minutes Residual Volume: 0.04 mL Flow Rate: 65 mL/min

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). Weber CR 9 WSA Hatz Diesel Vibratory Plate Compactor / Electric Start / New unit / In stock & immediately available Sales price: €12,290.00 net / €14,625.10 gross 3-year manufacturer warranty Technical specifications Engine: Hatz Diesel Max. engine power: 10.5 (14.3) kW/hp Weight: 743 kg Centrifugal force: 100 kN Crjdpfjyi Rzpsx Ak Aji Frequency: 65 Hz Working width: 75 cm Weber Smart Assist (WSA) - Analyzes signals from the machine’s integrated sensors and displays them graphically using symbols - Similar to the previous Weber MT engine protection, the engine automatically shuts down if continued operation would risk engine damage - Error symbols guide the operator step-by-step in troubleshooting - For an excessively dirty air filter, the cleaning and replacement process is shown step-by-step - Weber Smart Assist also includes the COMPATROL compaction control system, now in a new design - Displays compaction progress on an easy-to-read bar graph - New machine operation: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engine speed is regulated automatically The reversible soil compactors of the CR series impress with strong compaction performance and maximum efficiency. They are first choice for classic road and civil engineering as well as paving applications. Well-balanced running characteristics, high stability, and low hand-arm vibration ensure outstanding operator comfort. CR 9 – Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle cable and hydraulic changeover are safely routed inside the guide bar - Low hand-arm vibration - Fatigue-free operation thanks to height-adjustable guide handle - Protection of machine and engine by engine protection frame and motor cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing, with all maintenance components readily accessible - Safe and fast loading thanks to large, foldable lifting eye - Secure lashing during transport thanks to additional lashing points on the engine console - Greater operator convenience via electric start - Application areas: road and civil engineering, paving, and—thanks to the low overall height and working width—the CR 9 is also ideal for trench shoring We have a large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. We will gladly provide you with a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: used, For inquiries regarding the vibratory plate compactor, Mr. Herden will be happy to assist you (by phone at ...). Weber CR 8 WSA Hatz Diesel Vibratory Plate Compactor / Electric Start / New Unit / In Stock & Immediately Available Sales Price: €11,190.00 net / €13,316.10 gross 3-Year Manufacturer’s Warranty Technical Data: - Engine: Hatz Diesel - Max. Engine Output: 10.5 kW (14.3 hp) - Weight: 608 kg - Centrifugal Force: 75 kN - Frequency: 67.5 Hz - Working Width: 70 cm Weber Smart Assist (WSA): - Evaluates signals from the machine’s integrated sensors and displays them graphically via symbols - Similar to the previous Weber MT engine protection system, the engine will shut down whenever continuation could cause engine damage - Symbols also indicate to the operator how to resolve any displayed issues - In the event of a heavily soiled air filter, step-by-step instructions for cleaning and replacing the filter element are provided - Weber Smart Assist also features the newly designed COMPATROL compaction control system - Provides the operator with a clear and easily readable bar graph display of compaction progress - New operating concept: After starting the engine, vibration is activated at the press of a button - There is no throttle lever as the engine automatically adjusts to the correct RPM The reversible soil compactors of the CR series stand out for their powerful compaction performance and maximum efficiency. They are the first choice for compaction work ranging from classic road and civil engineering to paving applications. Balanced running properties, high operating smoothness, and low hand-arm vibrations ensure a high level of operating comfort. CR 8 – Economical Machine with Powerful Compaction: - Infinitely variable forward and reverse travel; hydraulic reversing - Throttle cable and hydraulic reversing system routed and protected within the guide handle - Low hand-arm vibration - Fatigue-free operation with height-adjustable guide handle - Engine and machine protection via protective frame and cover - Lower maintenance requirements thanks to self-adjusting centrifugal clutch - Easy servicing with all maintenance components easily accessible - Safe and quick loading via large, foldable lifting eye - Secure tie-down for transport thanks to additional lashing points on the engine console - Greater operator comfort due to electric start - Areas of application: road and civil engineering, paving work, and, thanks to the low overall height and working width, the CR 8 is also ideal for trench shoring We have a large selection of various vibratory plate compactors in stock and available for immediate delivery! Mr. Herden will be happy to assist you by phone at ... Upon request, we will also be pleased to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. Csdpfx Aksyi Rzvo Aeri We are...

Condition: used, Year of construction: 1983, Solna D25 Year: 1983 Units: 8 (1 1 units) Folder: Tabloid / A4 / A5 Meg D 200 S automatic reel rewinder Technotrans refrigeration unit Plate puncher Plate bender Spare main motor Crsdjymby Repfx Ak Aoi Compressor Under power Available immediately. The machine was used for printing news papers

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights Csdsyq Ufnopfx Ak Asri * Multi-chamber tail lights

Condition: new, Number of milling spindles 2 St. fence 1 ja workpiece ja Stegherr Cross rung milling machine TYPE KSF-mini including standard stop with 2 sliding stops, without tools With the KSF-mini, all of those that occur in practice can be used Crossbar connections can be made quickly and precisely. The Precise execution is achieved by having the workpiece in one Clamping is machined on three sides. The tool is driven by two three-phase motors; the tension of the Workpieces pneumatically. The profile cutter is designed for the web width. The saw blades that... If you carry out flattening, spacer rings are used to match the dimensions of the Profile milling cutter adjustable. The swivel device is free of play. The machine is designed for a maximum workpiece cross section of 56 x 46mm. Voltage Europe: 400V(+/-10%)/3Ph/50Hz, USA: 440V(+/-10%)/3Ph/60Hz Other voltages on request. Operating instructions in German or English. Credpfjyrtzqex Ak Aoi Table base EUR 1.070.00 Foot switch EUR 900.00 Adjustment optics EUR 130.00 Profile milling cutter in HM-Wepla version, available for selection: Ø 5,7,9,11,13 mm. Price per piece EUR 650.00 1 set of replacement insert knives for profile milling cutters (=10 pieces) EUR 190.00 HM saw blade, price EUR 170.00 per piece (For a web of e.g. 10 mm, 3 saw blades are required) Setting the machine to the tools provided by the customer, price EUR 700.00 per individual tool Packaging in a crate (suitable for land transport) EUR 650.00 Packaging shrink-wrapped on a pallet (only within Europe, not for air freight) EUR 340.00 Pricing ex works, unpacked, uninsured, for delivery within Germany plus the VAT valid at the time of delivery. (all technical information according to the manufacturer, without guarantee!)