Used Wedge Zinc for sale (677)

Condition: new, empty load weight: 341 kg, maximum load weight: 659 kg, overall weight: 1,000 kg, loading space length: 2,020 mm, loading space width: 1,070 mm, loading space height: 720 mm, loading space volume: 1.5 m³, color: silver, construction height: 1,390 mm, working width: 1,650 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, 100km/h approval / reinforced railing / off-road tyres / reinforced mudguards, * IMMEDIATELY AVAILABLE * incl. 100km/h approval / Reinforced railing / Offroad tires / Reinforced mudguards Technical data: - Make: TPV Trailers - Model: KT-EB2-Offroad - Vehicle type: Cover trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 202 x 107 x 72 cm - External dimensions (LxWxH): 308 x 165 x 139 cm - Loading height of floor: 50 cm - Perm. Total weight: 1,000 kg - Unladen weight: 341 kg - Payload: 659 kg - Chassis: Low loader (wheels next to the body) - Tires: 235/75R16 - Chassis: KNOTT rubber suspension - Support wheel: Yes - 100km/h approval: Yes EQUIPMENT: - Brake: Yes - Number of axles: 1 - Floor: Wooden floor - Drop sides: Sheet steel, single-walled - Drop side height: 72 cm - Drop sides foldable: No - Drop side hinges: 2 at the rear, riveted - Drop side elevations: 0 - Locks: Eccentric locks - Railing: Yes - Number of pallet spaces: 1 - Lid: Yes - Lid stop side: Front - Lid load: approx. 75 kg - Rear opening with closed lid: Yes - Bicycle carrier / lid: Yes - Rear opening with closed lid: No Frame/chassis: Sheet steel frame - Galvanization: galvanized - Drawbar: V-drawbar, bolted, U-profile - Drawbar length: 90 cm - Mudguards: Plastic mudguards - Rear doors / tailgate: Rear doors - Load ramps: - - Drive-on angle: - - Supports: Yes - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC documents DESCRIPTION: Single-axle box trailer with upward-opening and lockable splash-proof cover with railing. The reinforcement set consists of reinforced roof rails and stronger shock absorbers for the lid, which are additionally supported on the inside with a reinforcing plate. This increases the load capacity of the cover to 250 kg, so that you can easily fit bicycle racks, roof boxes or even roof tents. The off-road trailer is suitable for off-road use. The coarse-tread off-road tires give this trailer more ground clearance and the reinforced black painted mudguards can be walked on. This trailer has 1.5 mm thick side walls made of aluminum-zinc-coated sheet steel. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iajdpfxou Hr Tnj Abren

Condition: new, empty load weight: 760 kg, maximum load weight: 2,240 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 5,020 mm, loading space width: 2,090 mm, color: silver, construction height: 1,000 mm, working width: 2,150 mm, Hydraulics, automatic reverse drive, drive-on ramp, full aluminium floor / tiltable loading area / wheel stop bracket / spare wheel, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. full aluminium floor / tiltable loading area / wheel stop bracket / spare wheel Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,000 kg - Unladen weight: 760 kg - Payload: 2,240 kg - Interior dimensions: 500 x 209 x 0 cm (L x W x H) - Overall exterior dimensions: 670 x 215 x 100 cm (L x W x H) - Loading sill height: 60 cm - Tires: 195/55R10 steel rim - Brakes: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: full aluminium floor! - Drop sides: without - Drop side height: 0cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes - Hydraulics: manual hydraulics - Drive-on angle: - Wheel stop: adjustable wheel stop bar - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Lashing eyes: 12 pieces in the floor (750kg/pc) - Winch: yes. manual, with adjustable winch bracket - Supports: Ramps: not necessary, drive-on wedges mounted on the vehicle - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - aluminum floor - extremely robust - 1 sliding wheel stop bracket - very stable welded steel frame - tiltable loading area by means of hand hydraulics + 2 lifting cylinders - frame cpl. frame completely hot-dip galvanized - many stable cross beams thus high point load - additional longitudinal struts welded in throughout - 12 lashing eyes inside the loading area, rubber-coated (750kg/each) - automatic reverse drive - ALKO overrun device and parking brake - ALKO coupling head - very stable V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing light - large rear lights plug - reversing lights - large safety lighting - LED rear lights - integrated rear fog light - swivel lighting - automatic center support wheel - spare wheel mounted under the cargo bed - registration papers: COC papers Incl. Optional extras: - Cable winch with cable winch bracket - Cable winch can be removed and adjusted in length Accessories can be retrofitted - please enquire: - 100 km/h approval with shock absorbers - Anti-theft device - Tarpaulin body - Fixed box body - Drop sides - Additional wheel stoppers - Storage box - Additional lashing eyes - Reversing lights - Lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iaodpfx Aou Ht Nwobren

Condition: new, empty load weight: 268 kg, maximum load weight: 482 kg, overall weight: 750 kg, loading space length: 2,020 mm, loading space width: 1,070 mm, loading space height: 1,060 mm, loading space volume: 2.4 m³, color: silver, construction height: 1,660 mm, working width: 1,520 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, 100km/h approval / steel drop sides, * IMMEDIATELY AVAILABLE * incl. 100km/h approval / steel drop sides Technical data: - Make: TPV Trailers - Model: KT-EU2 Plus - Vehicle type: Cover trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 3 years from initial registration - Internal dimensions (L x W x H): 202 x 107 x 106 cm - External dimensions (L x W x H): 296 x 152 x 166 cm - Loading height of floor: 50 cm - Perm. Total weight: 750 kg - Unladen weight: 268 kg - Payload: 482 kg - Chassis: Low loader (wheels next to the body) - Tires: 145/80R13 - Chassis: KNOTT rubber spring axle - Support wheel: Yes - 100km/h approval: Yes EQUIPMENT: - Brake: No - Number of axles: 1 - Floor: Wooden floor - Drop sides: Sheet steel, single-walled - Drop side height: 106 cm - Drop sides foldable: No - Drop side hinges: 2 at the rear, riveted - Drop side elevations: 0 - Locks: Eccentric locks - Railing: Yes - Number of pallet spaces: 1 - Lid: Yes - Lid stop side: front - Lid load: approx. 75 kg - Rear opening with closed lid: Yes - Bicycle carrier / lid: Yes Frame/chassis: Welded sheet steel frame - Galvanization: Galvanized - Drawbar: V-drawbar, bolted, U-profile - Drawbar length: 90 cm - Mudguards: Plastic mudguards - Rear doors / tailgate: Rear doors - Load ramps: - - Drive-on angle: - - Supports: Yes - Rear lighting: Incandescent lamps, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION: - Side walls made of 1.5 mm sheet steel with aluminium zinc coating - with 1x side wall elevation - continuous side members (3 pieces) - screen-printed wooden floor, 9 mm continuous without joint, slip-resistant and waterproof - eccentric locks for the rear door and lid - galvanized V-drawbar - plastic mudguards - lid made of steel KTL and black powder-coated, 56 mm high with roof rails, splash-proof - load capacity lid: 20 kg open / 75 kg closed - 4 lashing handles mounted inside on the floor - maintenance-free rubber spring axle from KNOTT - 100 km/h manufacturer's approval - 2x rear supports mounted - support wheel with clamp mounted - 13-pin plug - large-dimensioned safety lighting plug - large safety lighting - integrated rear fog light - lighting recessed in rear frame New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iodpfeu N Nixox Abrjan

Condition: new, empty load weight: 350 kg, maximum load weight: 950 kg, overall weight: 1,300 kg, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 800 mm, loading space volume: 2.6 m³, color: silver, construction height: 1,470 mm, working width: 1,790 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Koch trailer - Model: 4.13 - Vehicle type: Cover trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 250 x 125 x 80 cm - External dimensions (L x W x H): 383 x 179 x 147 cm - Loading height of floor: 50 cm - Perm. Total weight: 1,300 kg - Unladen weight: 350 kg - Payload: 950 kg - Chassis: Low loader (wheels next to the body) - Tires: 205/55R16 - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100km/h approval: Yes EQUIPMENT: - Brake: Yes - Number of axles: 1 - Floor: Wooden floor - Drop sides: Double-walled anodized aluminium - Drop side height: 75 cm - Drop sides foldable: Rear drop side - Drop side hinges: 2 rear, bolted - Drop side elevations: 1 - Locks: Eccentric locks - Railing: Yes - Number of pallet spaces: 3 - Lid: Yes - Lid stop side: Front - Lid load: Heavy-duty, on the railing - Rear opening with lid closed: No Bicycle carrier / surf rack: Optional, can be retrofitted - Overrun device/brake: ALKO - Frame/chassis: Steel side member, bolted - Galvanization: Hot-dip galvanized - Drawbar: Tubular drawbar - Drawbar length: 125 cm - Mudguards: Steel mudguards - Rear doors / tailgate: Tailgate - Load ramps: - - Drive-on angle: - - Supports: Optional, can be retrofitted - Lashing eyes: 4 - Rear lighting: bulbs, lamps recessed in rear frame - Side lighting: - - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION: - Dropside height 75 cm + lid height 5 cm - Double-walled anodized aluminium dropside 30 mm, with integrated aluminium frame - Dropside with load securing system Accessories such as, lashing eyes can be easily fitted without drilling. - Stainless steel lashing lugs (V2A stainless steel) - Sturdy screen-printed base plate, non-slip (birch wood, (birch wood, waterproof glued) - Very sturdy V2A stainless steel latches for the tailgate (unique) - Lid can be opened from the rear - 2 sturdy V2A stainless steel hinges at the front - Sturdy aluminium lid with aluminium corrugated cover plate can be walked on - 8 mm V2A screw connection - Sturdy lid railing - Optional cross member set can be fitted to the railing - Sturdy V2A lid lock at the rear with disc lock - 2 gas springs for easy opening - Lid can be easily removed - Maintenance-free hot-dip galvanized rubber spring axle - Chassis and drawbar from renowned manufacturer ALKO - Safety indicator on the coupling - Steel mudguards - Tailgate can be easily removed - 13-pin plug - Reversing lights - Large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - fitted with balanced 1A brand tires as standard - large 205/55 R16 inch tires balanced on black aluminium rims and capable of 100 km/h - all M8 stainless steel (V2A stainless steel) screw fittings - clear operating sign with the most important data (tire pressure, cable assignment...) - including 10-year Koch warranty - black wedges with holder at the front instead of red New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vez Iajdpfx Abou Hr Uxorjn

Condition: new, empty load weight: 350 kg, maximum load weight: 950 kg, overall weight: 1,300 kg, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 950 mm, loading space volume: 3.3 m³, color: silver, construction height: 1,620 mm, working width: 1,790 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * Technical data: - Make: Koch trailer - Model: 4.13 - Vehicle type: Cover trailer - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 250 x 125 x 95 cm - External dimensions (L x W x H): 383 x 179 x 162 cm - Loading height of the floor: 50 cm - Perm. Total weight: 1,300 kg - Chassis: Low loader (wheels next to the body) - Tyres: 205/55R16 - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Yes DESCRIPTION - Dropside height 90 cm + lid height 5 cm - Double-walled anodized aluminium dropside 30 mm, with integrated aluminium frame - Dropside with load securing system Accessories such as lashing eyes can be easily mounted without drilling. - Stainless steel lashing lugs (V2A stainless steel) - Sturdy screen-printed base plate, non-slip (birch wood, (birch wood, waterproof glued) - Very sturdy V2A stainless steel latches for the tailgate (unique) - Lid can be opened from the rear - 2 sturdy V2A stainless steel hinges at the front - Sturdy aluminium lid with aluminium corrugated cover plate can be walked on - 8 mm V2A screw connection - Sturdy lid railing - Optional cross member set can be fitted to the railing - Sturdy V2A lid lock at the rear with discus lock - 2 gas springs for easy opening - Lid can be easily removed - Maintenance-free hot-dip galvanized rubber spring axle - Chassis and drawbar from renowned manufacturer ALKO - Safety indicator on the coupling - Steel mudguards - Tailgate as door, fixed, swivel-mounted - 13-pin plug plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - fitted with balanced 1A brand tires as standard - large 205/55 R16 inch tires on black aluminium rims, balanced and capable of 100 km/h - all M8 stainless steel (V2A stainless steel) screw connection - clear operating sign with the most important data (tire pressure, cable assignment...) - including 10-year Koch warranty - black wedges with holder at the front instead of red+ accessories Can be retrofitted on request: - rear supports - anti-theft devices - lashing rails - crossbars for bike racks, surfboards and the like are available on request New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Ijdpeu N Nirjfx Abrean

Condition: new, empty load weight: 960 kg, maximum load weight: 2,540 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 5,420 mm, loading space width: 2,090 mm, color: silver, construction height: 1,000 mm, working width: 2,150 mm, Hydraulics, automatic reverse drive, drive-on ramp, full aluminium floor / tridem / tiltable loading area / electric winch / wheel stop bar / spare wheel, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. full aluminium floor / tridem / tiltable loading area / electric winch / wheel stop bar / spare wheel Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,500 kg - Unladen weight: 960 kg - Payload: 2,540 kg - Interior dimensions: 542 x 209 x 0 cm (L x W x H) - Overall exterior dimensions: 725 x 215 x 100 cm (LxWxH) - Loading sill height: 61 cm - Tires: 195/55R10C steel rim - Brake: yes - Support wheel: yes, automatic - 100km/h: at extra charge - incl. Vehicle documents Vehicle superstructure: - Floor: full aluminium floor - Drop sides: without - Drop side height: 0 cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes - Hydraulics: manual hydraulics - Drive-on angle: approx. - Wheel stop: adjustable wheel stop bar - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Lashing eyes: 14 in the floor (750kg/each) - Winch: yes. electric with battery, winch bracket can be moved left and right - Supports: Support at the rear - Ramps: not necessary, drive-on wedges mounted on the vehicle - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Tridem / 3 axles - Aluminum floor - Extremely robust - Winch, electric, can be moved left & right, as well as adjustable in length - Incl. 12V battery for cable winch - weather protection cover for cable winch - 1 movable wheel stop bracket - very stable welded steel frame - tiltable loading area using hand hydraulics + 2 lifting cylinders - frame cpl. frame completely hot-dip galvanized - many stable cross beams therefore high point load - additional longitudinal struts welded in throughout - 14 lashing eyes inside the loading area, rubber-coated (750kg/each) - automatic reverse drive - ALKO overrun device and parking brake - ALKO coupling head - very stable V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing light plug - reversing lights - large safety lighting - integrated rear fog light - swivel lighting - automatic center support wheel - registration papers: COC papers Accessories can be retrofitted - please enquire: - 100 km/h approval with shock absorbers - anti-theft device - tarpaulin body - drop sides - additional wheel stoppers - storage box - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iedpfx Asu Hry Uebrsan

Condition: new, empty load weight: 736 kg, maximum load weight: 2,764 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,200 mm, loading space width: 1,700 mm, loading space height: 200 mm, loading space volume: 1.1 m³, color: silver, construction height: 1,970 mm, working width: 2,320 mm, Automatic reverse drive, hot-dip galvanizing, TracStrap load securing, extremely robust body, perforated lashing floor, LED lighting, e-wheel, bucket tray, * IMMEDIATELY AVAILABLE * incl. TracStrap load securing / extremely robust body / perforated lashing floor / LED lighting / e-wheel / bucket storage TECHNICAL DATA - Make: Brian James - Model: Digger Plant 2 - Vehicle type: Construction machinery - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 320 x 170 x 20 cm - External dimensions (LxWxH): 512 x 232 x 197 cm - Loading height of floor: 40 cm - Perm. Gross vehicle weight: 3,500 kg - Unladen weight: 736 kg - Payload: 2.764 kg - Chassis: Low loader (wheels next to the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Robust steel mudguards with non-slip perforated profile - Reinforced perforated steel floor inside on the side - 18 mm screen-printed wooden floor in the middle, non-slip and waterproof - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Chassis: Steel frame with anti-slip profile Hot-dip galvanized frame - Chassis with two additional longitudinal beams under the loading areasteel single ramps, galvanized steel, adjustable, L=1.62m - stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber bumper dampens noise - very low chassis for low drive-on angle - excavator bucket rest - 10x lashing eyelets on the dropside (1000dAN/kg) TÜV certified - free choice of lashing points when lashing in the perforated steel floor - TracStrap Kit (Heavy-Duty), TÜV-certified load securing system - Revolutionary system - First-class securing of tracked vehicles - Ready for departure within a very short time - Front wedges are adjustable and form the basis for form-fit load securing - 2x lashing straps (LC 5000 daN) for lashing over the chains - Maintenance-free axles and damping systems designed for long journeys and heavy loads - Spare wheel mounted on the side wall for easy access - Automatic reverse - ALKO overrun device and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Very sturdy V-drawbar REINFORCED - 13-pin plug - Complete LED lighting system Plug - Complete LED lighting: Extremely bright, durable and reliable. - LED rear lane departure lights - Reversing lights - Integrated rear fog light - Robust rear light protection - Heavy-duty support wheel - 5-year chassis warranty Accessories can be retrofitted - please enquire! - Excavator bucket cage - Lashing straps - Storage box - Winch - and much more New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Iodpfsu Hrhrox Abrsan

Condition: new, axle configuration: 2 axles, loading space length: 64,000 mm, loading space width: 24,800 mm, loading space height: 6,000 mm, suspension: air, tire size: 205/65-17,5, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal reference number for customer inquiries: 5-086 PAVIC TBPA 14 64ZC Container Flatbed Trailer Suitable for 20" containers in various versions. Standard and wide, thanks to telescopic container locks! * Ultra low-profile design with a loading edge height of only 830 mm (unladen)! * Approx. 780 mm coupling height * Chassis length: approx. 6,400 mm from front frame to front frame * Coupling length (B) = 7,900 mm * Removable sideboards and stanchions also available * Front wall approx. 800 mm high * 4x lateral, extendable container locks * Container locks flush with the floor * Ferry lashing eyes: 2x at the front and 2x additional at the rear * 1 set of landing legs at the front, single-sided operation * Drawbar eye Ø 40 mm * 2x SAF axles, 7t capacity each * Air-sprung suspension (incl. lifting/lowering device) * Branded tires: 205/65 R 17.5 twin tires (max 90 km/h) * LED lighting system * Rear socket for beacon * Warning board, red/white striped, extendable, 2x at the rear and 2x at the landing legs (with outline marker outside) * KTL with zinc-phosphating plus powder coating, providing maximum corrosion protection Ijdpfxjyk Akxo Abrsan Financing is available through one of our financing partners. For further questions, our sales team is at your service. This is a non-binding offer. Subject to prior sale, errors and changes excepted. = More Information = Axle configuration Tire size: 205/65-17.5 Brakes: Drum brakes Suspension: Air suspension Weights Unladen weight: 4,100 kg Payload: 9,900 kg Gross vehicle weight: 14,000 kg Functionality Body manufacturer: PAVIC container flatbed Condition Overall condition: very good Technical condition: very good Visual condition: very good

Condition: new, Year of construction: 2026, ZGR-3640/0.8 Warrenty: 12 months Certificate CE Eccentric pressure that is transferred to both sides of the machine Working length: 3640mm to the plate thickness of 0,8 mm STEEL SHEET 0,8 mm TITAN-ZINC-PLATE 0,8 mm, ALUMINIUM SHEET 1,2 mm , Iedpecka N Usfx Abrjan COPPER PLATE 0.8 mm, NIRO-SHEET 0,5 mm , Bending beam: 24 mm Bending angle: 145 degrees Cutting in the whole working length, Lift the upper beam in three layers, maximum width between the beams 80 mm rear frame for holding sheet, weight: 650 Kg Shears - with regulation of scissors guide and the rolls, which are made of high-alloy steel of very high resistance to wear. This allows cutting of sheet metal over a very long period without sharping the rotary shear. The performance of the rotary shear is about 40km sheet with a thickness of 0.5 mm - up to the first sharpening. The shears can be sharpened on average 35 times. The rotary shear weighs about 6.5 Kg. The price of this item does not include VAT. For invoice, we need the active VAT No. We provide VAT invoices from the tax rate of 0%. If you wish to order private, you should contact us.

Condition: new, maximum load weight: 9,900 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 6,400 mm, loading space width: 2,480 mm, Equipment: ABS, Internal reference number for customer inquiries: 177----NEW AT LKW PAVIC PAVIC TBPA 14 64ZC Container Flatbed Trailer. The flatbed superstructures can be used universally, even for oversized loads. With additional container locks, you gain even more flexibility in your business. Suitable for 20" containers in various configurations. * Ultra-low construction with a loading edge height of only 830 mm (unloaded)! Iasdpfx Abexnn Szsron * Approx. 780 mm coupling height * Chassis length approx. 6400 mm (front frame to front frame) * Coupling dimension (B) = 7900 mm * Drop sides and stakes removable, also available * Front wall approx. 800 mm high * 4x container locks, laterally extendable * Container locks flush with floor * Ferry lashing points: 2x front, additionally 2x rear * 1 set of landing gears in front, single-side operation * Towing eye Ø 40 mm * 2x 7t SAF axles * Air suspension (including lift/lower device) * Premium tires 205/65 R 17.5 twin tyres * LED lighting system * Rear socket for rotating beacon * Warning panel, red/white hatched, extendable, 2x at the rear and 2x by the landing gear (with side marker lamp) * KTL coated with zinc phosphating plus powder coating, maximum corrosion protection Financing / hire purchase, as well as leasing / partial amortization leasing, are available with our leasing partner. If you have any further questions, our sales team will be happy to help. This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: new, empty load weight: 2,030 kg, maximum load weight: 11,970 kg, overall weight: 14,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,800 mm, suspension: steel, tire size: 285 /70 R19,5, color: other, gearing type: other, front tire size: 285 /70 R19,5, rear tire size: 285 /70 R19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, ZINCED, closed floor, skip according to DIN 30720 up to max. 15 cbm, or for ASK waste compactor, 2 x support, rear, loading height approx. 900 mm, tool box, , surcharge for ramps 1,600 ¤ net, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iodsygrm Ujpfx Abroan

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data – Installation: Number of racking rows: 01 unit Length per racking row: 17,040 mm Number of bays per row: 06 units Number of levels plus ground level: 06 units Technical Data – Capacity: Iajdeyfg Hmopfx Abrjn Pallet spaces per bay: 21 units Pallet spaces per racking row: 126 units Total pallet spaces: 126 units Max. bay load: 19,000 kg Lowest clear shelf height: 1,080 | 880 mm Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,055 kg Scope of supply: 07x pallet rack frames, used Material finish: sendzimir galvanized Frame type: P215 Profile dimensions: 120 x 100 x 2.5 mm Including horizontal and diagonal braces, and base plates The frames are pre-assembled (bolted lattice) Height: 14,100 mm Depth: 1,050 mm 72x pallet rack beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Maximum load per pair of beams: 3,165 kg, with uniformly distributed load Note: The functionality of the beams is fully ensured in spite of holes. SSI project with heat baffles mounted as per manufacturer's specifications! 144x safety pins, used Material finish: sendzimir galvanized For securing beams against inadvertent lifting 28x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used Finish: fully galvanized For leveling the rack frames when installing on uneven surfaces 01x load capacity sign with field and shelf load details, manufacturer and job number dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Delivery or shipment is possible at extra cost, which can be quoted separately depending on the delivery location and the scope of delivery.

Condition: new, Year of construction: 2025, Sheet metal folder RED 2200/0.8 + wheels Bending machine with side cutouts for bending from up and down. Thanks to it, you will make your window sill ready. In the machine's construction there is a place for bent processing at a height of 6 cm up and down. It is a modern sheet metal folding machine that bends sheet metal from three sides. max. working length: 2200 mm bending: 0.8 mm steel sheet 1.2 mm (aluminum, copper, zinc) Iodocqu Dgopfx Abrsan bending beam: 15 mm bending angle max. 150 degrees max. opening: 80 mm weight: ca. 250 kg

Condition: new, Year of construction: 2026, Sheet metal machines type RED are the trademark of the Prod Masz company. Each RED press brake has a narrow folding beam, regardless of its length, can be bent on 3 sides thanks to side cut-outs, 2 handles on both sides. An additional advantage is more space inside for a fold. Professional folding bench RED PLUS with foot pedal Iaedpfecrcgqjx Abrsn Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminium, copper, zinc) Bending beam thickness: 15 mm Bending angle: max 160 degrees Upper beam opening: 80 mm Weight: about 700 kg Roller scissors plus 350 euros The front depth stops and rear frame are also included in the price. Bending from 3 sides -> cutouts on the side Recess 60mm/45° Marking template FREE :) Price: EUR 6,600.00 Delivery costs: PLEASE ASK Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C Ijdpfx Ajwtct Hjbrsan 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting 8x foot plates 4x wedge lifters various pairs of jaws 1x bezel Ø 100mm closed *

Condition: used, Technical details: bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 160 mm spindle taper MT: MK3 feed steps: 0,1; 0,2; 0,3 mm/U und manuell spindle speed:: max. 1800 stufenlos U/min Distance spindle/table max.: 750 mm table clamping surface:: L: 280 x B: 355 mm table rotating: nein ° clamping table - swivable: 360 Grad Iasdpfx Aova Higobrsn drill table adjustment: vertikal: 600 mm column diameter: 130 mm threading: Nein / no total power requirement: 1,1 kW weight of the machine ca.: 570 kg dimension machine xH: 0,9 x 0,9 x 1,9 m This machine has 2 tables. Drilling table LxW: 370 x 500 mm Attachment table: LxW: 420 x 750 mm Clamping surface = 320 x 600 mm, transverse displacement (X-axis) 250 mm possible Ejection of tool via ejector wedge accessories: vice machine base *

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 2,450 kg, total width: 2,000 mm, total length: 4,000 mm, total height: 2,300 mm, fuel: electricity, cutting length (max.): 500 mm, saw drive: 15,000 W, Saw and Splitting Machine AMIX LP-450 K Professional (Electric Drive) Complete System, Model 2023 Consisting of: 1) AMIX LP-450 K Professional; Splitter knife combination (8/16), Saw blade Ø110 2) AMIX PPW-3 Electric Log Infeed + Cross Conveyor 3) Work platform 4) Electrification (Plug & Play ready) Technical Data – Main Machine (AMIX LP-450): + Max. log diameter: 45 cm + Variable number of splits: 8/16 combination + Log length: 20–50 cm + Box wedge splitter, hydraulically adjustable, made of Hardox, 16/8 + Circular saw blade: 110 cm diameter (15 kW electric motor drive) + Hydraulic log hold-down + Splitter cylinder with 25 t working pressure + Hydraulic drive: 15 kW electric motor + Infeed conveyor with hydromotor + Hydraulic connections for log infeed table + Split wood conveyor belt: 450 cm + Dimensions (l/w/h): 400 x 200 x 230 cm – Weight: 2,450 kg + Electric connection (single-plug system with central distribution) Technical Data – AMIX PPW-3 (Log Cross and Longitudinal Conveyor): - 3-chain cross conveyor, 110 cm spacing - Length: 400 cm / Width: 240 cm - For log lengths from 200 to 500 cm - Weight: 650 kg A demonstration is possible with a binding request! Original system price: EUR 64,000 The system has only run in trial operation! Isdpeyky Egsfx Abroan Manufacturer description 1: see amix-wieczorek.pl saw-splitter-lp-450sp-1 Manufacturer description 2: see amix-wieczorek.pl luparek-ppw-3-1 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, "Prod-Masz" your partner when it comes to bending. Our name stands for innovative products of the highest quality and reliability. Our bending machines impress with their particular flexibility, performance and versatility. Iasdpfx Abjcv S H Aoren Folding beam only 15mm RED 3200 / 0.8mm Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminum, copper, zinc) Folding beam thickness: 15 mm Bending angle: max. 150 degrees Upper cheek opening: 80 mm Weight: approx. 600 kg The price also includes the front depth stops and the rear frame. Bending from 3 sides -> cutouts to the side 60mm / 45 ° recess Price: 5100.00 EUR rotary shears + 350 Euro Delivery date: every week We are looking forward to your contact! The invoices are issued either with 0% of VAT as intra-Community delivery.

Condition: used, Year of construction: 2018, Overview  The gravity filling machine is a rotating machine that works automatically and is suitable for filling bottles, cans made of zinc sheet or jars. It is used to add liquids (such as brine, oil, vinegar, sauce, sugar water, etc.) into containers filled with solids. It is also used to fill empty bottles. The filler block can be viewed at any time.  Technical details  Number of filling places: 48  Pitch circle diameter: 1560 mm  Capacity (last):  250- 300 bottles/ min at 500ml fruit syrup. For used twist-off cap an additional capper would have to be organized  160 - 200 bottles/ min at 250ml maple syrup  Used plastic cap can be applied by installed AROL capper  Dimensions  Length: 3.000 mm Width: 2.500 mm Height: 2.500 mm Weight: 6.500 kg   Electr. characteristics Voltage: 400 V - 50 Hz  Auxiliary voltage: 24 V DC  Installed power: 20 kW  Scope of delivery  Filler | Zilli& Bellini | GD48/12 | 2018 Capper | Arol | TSI - EURO VP - W6 | 2018 Iedpsnhikiefx Abrean

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Ijdjxx N Dgjpfx Abrean Delivery date by arrangement

Condition: new, Year of construction: 2026, working width: 4,200 mm, bending angle (max.): 150 °, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, total length: 4,500 mm, Hey professionals, we know that you are always looking for the best and most powerful tool. That's why we have the ultimate solution for you: the Prod-Masz electric bending machine RED-4200/0.8/160* with recess! With our bending machine, which is equipped with an advanced electronic control system, precision and ease of use become standard. Now, a push of a button starts the bending process and guarantees flawless results without unnecessary effort. Iodpfx Abebnq U Terean Magnets attached to the bending beam ensure a stable position of the sheet and enable precise dimensional adjustment, which is the key to perfect shapes. In addition, the machine offers a three-stage height adjustment of the upper beam and a number of necessary accessories, including a protractor, an angle limiter, a rear table for supporting the sheet -> quick adjustment with a handwheel. ✔️ Maximum working length: 4200 mm ✔️ Bending capacity: up to 0.8 mm (steel sheet) ✔️ Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.2 mm, copper sheet: 1.25 mm ✔️ Bending angle of the bending machine: max. 160 degrees ✔️ Bending beam thickness: 18 mm ✔️ Cutting with the roller shears across the entire working width ✔️ Raising the upper beam in three positions ✔️ Upper beam stroke: 80 mm Seize this unique opportunity and improve your workshop with the best folding machine on the market! Trust the manufacturer who has been the industry leader in metalworking for years. -> The roller shears (max. cutting capacity 0.8 mm / steel) plus 350 euros -> a hand folding machine plus 75 euros Additional equipment: - Stop with scale - Quick adjustment via hand crank plus 1250 euros Delivery date: every week Monday/Tuesday We look forward to hearing from you! -> We issue invoices

Condition: new, Year of construction: 2026, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000T/0,8 incl. wheels Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Ijdpfxoc Rtv Ts Abrsan Price: 1.350,00 Euro ( VAT excl. ) We provide invoices with 0% of tax.

Condition: new, *IMMEDIATELY AVAILABLE* Special Price! - We are updating our exhibition and selling various display trailers and one-off units at special prices! The promotional price applies only to available trailers! Once sold, they’re gone! Tandem Trailer with 30mm Steel Sheet Sandwich Body, braked, 2 lashing rails, 4 lashing rings Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 2,700 kg • Unladen weight: approx. 725 kg • Payload: approx. 1,975 kg • Internal dimensions: 355 x 152 x 193 cm (L x W x H) • Overall external dimensions: 504 x 203 x 257 cm (L x W x H) • Loading height: approx. 56 cm • Tyres: 185R14C steel rim • Brakes: yes • Jockey wheel: yes • 100 km/h approval: at extra cost • incl. vehicle papers Body Structure: • Floor: Finnish multiplex plywood • Walls: 30mm steel sheet sandwich • Roof material: 25mm GRP sandwich • Chassis: ALKO rubber suspension axle • Number of lashing rings: 4 pieces (750kg/daN each) • Rear door: Yes, double-winged • Rear ramp: No • Rear ramp material: - • Rear door/ramp function: cam bar lock • Rear door/ramp passage dimensions: • Interior light: at extra cost • Support legs: at extra cost • Overrun coupling & brakes: yes • Frame/chassis: V-drawbar, hot-dip galvanized • Lighting plug: 13-pin • Registration documents: COC papers Standard Equipment: • Robust V-drawbar, hot-dip galvanized by immersion • Tandem axle • ALKO overrun coupling • Floor plate made of Finnish multiplex • Side walls made of extra heavy-duty 30mm steel sheet sandwich • Roof 25mm GRP sandwich • Double rear doors • Doors with special hard/soft plastic seal profiles • Stainless steel cam bar locks and zinc-plated hinges • Rear frame and edging profiles made of special aluminum profiles • 4 lashing points in the floor, 750 kg load per point • Trailer equipped with pre-mounted lashing rail on both sides • Automatic jockey wheel • Reverse automatic system • Plastic mudguards • 13-pin plug • Reversing lights • Large-sized safety lights • Integrated rear fog lamp • Superstructure: splashproof • Registration documents: COC papers Optional Accessories – Please inquire: • Anti-theft device • Rear support legs • 100 km/h approval with shock absorbers • Side door • Motorcycle wheel chocks • Motorcycle rails • Motorcycle tie-down straps • Additional lashing rings • Additional slotted rails for tie-down straps & shoring beams • Lath strip with rubber coating for tie-down straps & shoring beams • Shoring beams in steel or aluminum Iasdsyivbhopfx Abrjn • Interior lights • Additional reversing lights • Much more New vehicle with warranty and TÜV. ——— - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document shipping in advance available or transit plates (Germany) can be provided - Export license plates incl. customs declaration possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available immediately from stock! For over 30 years official specialist dealer & workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Errors, mistakes and prior sale excepted -

Condition: new, * IMMEDIATE AVAILABILITY * Tandem trailer with 50mm steel sheet sandwich construction, braked, 2 load-securing rails, 4 lashing eyes Technical Data: • Type: New vehicle • Inspection (TÜV): New/2 years • Availability: IMMEDIATE! • Permissible gross weight: 2,700 kg • Unladen weight: approx. 681 kg • Payload: approx. 2,019 kg • Internal dimensions: 301 x 152 x 193 cm (L x W x H) • External overall dimensions: 454 x 203 x 257 cm (L x W x H) • Loading edge height: approx. 56 cm • Tyres: 185R14C steel rims • Brakes: yes • Jockey wheel: yes • 100 km/h approval: available at extra cost • incl. vehicle documents Standard Equipment: • Robust V-drawbar, hot-dip galvanized • Tandem axle • AL-KO overrun brake system • Floor panel made of Finnish multiplex • Side walls made from extremely sturdy steel sandwich panels, 30 mm thick • Roof made from 25 mm GRP sandwich • Double rear doors • Doors fitted with special sealing profiles, made from hard/soft plastic • Stainless steel rod lock and zinc-plated hinges • Rear frame and edging made from special aluminum profiles • 4 lashing points in the floor, lashing capacity 750 kg per point • Load-securing rails fitted on both sides of trailer • Automatic jockey wheel • Automatic reversing function • Plastic mudguards • 13-pin plug • Reversing light • High-capacity safety lighting system • Integrated rear fog light Optional Accessories – Available upon request: • Anti-theft devices • Rear supports • 100km/h approval with shock absorbers • Side door • Motorcycle wheel chocks • Motorcycle wheel rails • Motorcycle tie-down straps • Additional lashing straps • Additional lashing eyes • Additional slotted rails for tie-down and load bars • Slatted rails with rubber coating for tie-down straps and load bars • Load bars in steel or aluminum • Interior lighting • Reversing light • and much more New vehicle with warranty and inspection certificate (TÜV). - Financing or leasing available - Nationwide delivery possible - Vehicle registration documents can be sent in advance or temporary license plates (Germany) can be provided. - Export license plates including customs clearance available Iaodsyivbujpfx Abrsn Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been specialists and service workshop for over 30 years for brands such as Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberté, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix, and many other brands. - Errors, omissions, and prior sale excepted -

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,920 kg, empty load weight: 2,080 kg, loading space volume: 13.8 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,000 mm, Price on request. The price applies ex stock 33106 Paderborn! Iajdpfjydbrusx Abrjn Volume discounts possible for purchase of multiple containers. Leasing/hire purchase available. Available in approx. 4 - 6 weeks, RAL color of your choice. Other versions and sizes available ex stock Paderborn. Feel free to view our current inventory on our homepage. Roll-off container according to DIN 30722-1 Technical specifications: • Internal dimensions: 6000 x 2300 x 1000 mm (l x w x h) • Usable volume: 13.8 cbm • Unladen weight: 2080 kg • Floor: 5 mm S 235 • Side walls: 3 mm S 235 • All sheets and profiles continuously welded • Double wing door with safety lock • Additional longitudinal runners ('belly band') for increased stability • Container tested and approved according to DGUV Regulation 114-010 • Standard ladder, bolted, galvanized • Rounded floor/wall connection • Hook diameter 50 mm, S 355 • Hook height 1570 mm • Top frame made of round tube 89×6.3 mm • Net hooks • All moving parts greaseable • Steel rollers 159 x 6.3, length 300 mm • Inside and outside with zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg Errors and prior sale excepted. Photos for illustration purposes only. For questions, please feel free to send us a message or give us a call.