Used Wedge Zinc for sale (701)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, stroke length: 800 mm, ram plate width: 1,200 mm, ram plate length: 2,200 mm, overall weight: 100,000 kg, 2022 Macrodyne 1500T Hydraulic Hot Forging Press. Condition Very Good. Weight 100000 kg. Refer to attachments in the documents sections for more information. Unit available immediately. Buyer responsible for removal, contractor must be licensed and insured. MAXIMUM PRESSING FORCE 15,000 KN USABLE BED BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm Crjdpfx Acez Hb T Hjpjh USABLE RAM BOLSTER SIZE (L-R X F-B) 2200 mm X 1200 mm DISTANCE BETWEEN TENSION MEMBERS (L-R) 2400 mm DISTANCE BETWEEN TENSION MEMBERS (F-B X HEIGHT) 750 mm X 1473 mm DAYLIGHT 1400 mm SHUT HEIGHT 600 mm STROKE 800 mm TOP EJECTOR CAPACITY (STATIONS 3 & 4) 750 KN TOP EJECTOR STROKE (STATIONS 3 & 4) 90 mm BOTTOM EJECTOR CAPACITY (STATION 3) 750 KN BOTTOM EJECTOR STROKE 200 mm MAXIMUM PUNCH WEDGE CAPACITY (STATION 4) 6000 KN

Condition: good (used), functionality: fully functional, Esterer spreading jaw AVER. Equipped with electrically driven spreading rollers. Also adjustable manually. Electrical adjustment of the spreading jaws, also asymmetrical. Credpfx Acsz D Exuspjh Pressure rollers can be hydraulically extended and retracted. Heavy-duty spreading jaw blades and spring flaps.

Year of construction: 2017, condition: good (used), We are selling our etching system for magnesium and zinc, consisting of: - STOMA Etching Machine E-90L - STOMA Developing Machine 18 L - STOMA Preparation & Pre-treatment Tank - STOMA Exhaust Hood 90 L All components were purchased new in 2017. The STOMA ECOLINE etching machines are largely constructed from V2A-grade stainless steel. The machine enclosure is bolted. ECOLINE etching machines are equipped with a separate freestanding control panel for increased flexibility. A powerful AC drive motor ensures reliable operation. The machines are supplied without factory-installed extraction or a fan. Standard configuration includes a connection for direct water cooling. Bath volume: 90L, Max. plate size: 50 x 65 cm, Weight: 450 kg, Dimensions (LxWxH): 1315 x 1430 x 1310 mm. - Suitable for magnesium and/or zinc - Maximum plate format: 50 x 65 cm Crodsy H D Acjpfx Acpeh - Bath volume approx. 90L - Mains voltage: 3 x 400V - Total space required: approx. 2 x 2.5 m STOMA Preparation Tank - Maximum plate format: 50 x 65 cm - Water connection: R ½" - Footprint: 200 x 95 cm - Drain pipe diameter: 50 mm STOMA Developing Machine 18L - Maximum plate format: 50 x 65 cm - Approx. 18 L

Condition: used, Year of construction: 2018, operating hours: 4,717 h, functionality: fully functional, machine/vehicle number: 222319, total height: 6,500 mm, total length: 18,500 mm, total width: 12,500 mm, type of input current: three-phase, temperature: 250 °C, operating temperature: 250 °C, space requirement height: 6,500 mm, space requirement length: 19,000 mm, space requirement width: 12,500 mm, heating capacity: 30 kW (40.79 HP), year of last overhaul: 2023, Equipment: documentation/manual, emergency stop, lighting, We are selling our dipping conveyor system, which was installed in 2018 by Forplan AG. The system is fully functional and was used until 2022/2023 to overcome capacity bottlenecks, allowing for approximately single-shift operation. There are 4 sets of baskets (16 in total) for the system, with different wire diameters, making it suitable for smaller connecting elements, stamped, and bent parts that can be coated as bulk material. After prior arrangement, the system can be inspected at any time. Codpjzkt I Tjfx Acpsrh

Condition: used, ZINC-COATING PLANT FOR PIPES , made by VOEST ALPINE / LOECO Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Credpfx Acjyman Hepeh Zn layer: 400 g/m2 according to DIN 2444 Maximum capacity: 60.000 t/year (16 t/h) Producible dimensions: ¼” to 4” Producible lengths: 4 to 7 m Zn layer: 400 g/m2 according to DIN 2444

Condition: excellent (used), Year of construction: 2013, operating hours: 11,556 h, functionality: fully functional, type of cooling: water, laser power: 500 W, laser wavelength: 1,064 nm, Equipment: documentation/manual, type plate available, LASER welding unit - AL 500 CWS Average power 500 W Emergency stop switch on the resonator CWS laser power supply Pulse peak power 17 kW Pulse frequency 0-100 Hz Crodpfxoz Eu Sys Acpoh Incl. deflection flange 3 x 400 V, 50-60 Hz, 3 x 32 A ALFlak motion system Travel range (X, Y, Z) 340 × 330 × 370 mm Equipment: Ergokeil 5°-25° Ergonomic wedge for microscope Tilting/swiveling optics AL500 LED-UW HP Focusing objective f=120, ultra-white diode ring light Protective glass swivel joint ALFlak X, Y and Z can be locked independently Eyepiece 16x magnification Rotating axis module ALFlak with chuck ø 125 mm / internal ø 24 mm Tiltable for horizontal to vertical rotation.

Year of construction: 1974, condition: used, functionality: unexamined, For sale: Cjdpfxez Dn Ulj Acporh - Circular saw mill, type OS65, from a carpentry/lumber mill in very good condition. - Low operating hours, only approx. 800-1000 m³/year. - Clamping carriage, self-propelled. - Auxiliary carriage. - Approx. 15m of guide rails for the clamping carriage/auxiliary carriage. - Splitting wedge/outfeed rollers, not driven. - €20,000 net / plus VAT. The following are also available separately: - Log infeed system - Chain hoist with transverse conveyor Prior inspection is required.

Condition: used, Year of construction: 1980, functionality: fully functional, 1 branded driven splitting wedge Arta/C, workshop overhauled New bearings for pressure rollers and motor Cjdpfxjqvz U Ee Acpjrh new tips opening width: 430 mm

Condition: excellent (used), Mosca RO-M strapping machine Manufacturer: Mosca Cedpfx Ajtncc Uocperh Type: RO-M Semi-automatic carton strapping Band width: 4 to 12 mm Hot wedge welding system Adjustable band tension Control: ecomat 100 Foot pedal for triggering the strapping process Table surface: W 640 mm Working height: 830 mm Power connection: 400 V More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: good (used), Rittal PS 4806 Modular Control Cabinet Product description PS 4000 modular system Manufacturer: Rittal Modular system: PS 4000 Model: PS 4806 Enclosure frame: 1.5 mm steel sheet Roof: 1.5 mm steel sheet Door: 2.0 mm steel sheet Rear panel: 1.5 mm steel sheet Mounting plate: 3.0 mm steel sheet with zinc coating Base plates: 1.5 mm steel sheet Enclosure frame: dip-coated Door, roof, and rear panel: dip-coated Powder-coated exterior, textured paint Color: RAL 7035 Codpfx Acotzbxzoperh 4 transport eyelets Wiring diagram pocket made of steel sheet 4118000 Swiveling frame, large 19" 44 U Base system as a stable cabinet base Control cabinet cooler SK 3296100 Dimensions (H x W x D) 2500 x 800 x 600 mm You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), The device performed only 140 measurements. NITON XL3t 980 GOLDD+ – a portable X-ray analyzer with a next-generation SDD detector featuring GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral databases for alloys enables the identification of stainless steels, tool steels, chromium-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, and zinc, zirconium, and aluminum alloys. The analyzer provides very fast measurement. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys such as: cast alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all iron-based alloys (0.00x% – 100%) and non-ferrous metal-based alloys (0.00x% – 100%) and rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x%-100%). Cedpszlcciofx Acperh The NITON XL3t 980 GOLDD+ analyzer operates based on BASIC PARAMETERS, meaning that it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that assigns a name, symbol, number, etc., to a known sample, and such samples will be identified by that name. a program for quantitative chemical analysis (SuperChem Teach Mode) – based on its own standards, we create our own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch-screen display. The screen is color and tiltable, which facilitates reading the results during field work. It includes an integrated scanner and backlit alphanumeric sample identification codes. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two interchangeable batteries. One battery enables continuous operation for 8-10 hours without the need to recharge. It has two libraries, 900 and 800.

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, Equipment: 3rd hydraulic function, Complete line for the production of stator and rotor packages, and an assembly line for assembling finished electric motors. The stator line consists of a manual workstation for producing packages, inserting slot insulation, inserting wedges, wire winding on a winding machine, a control machine, and a dielectric strength testing machine. The rotor line consists of a manual workstation for making rotor packages, a machine for applying insulating plastic, a machine for manual collector installation, a winding machine for wire winding, a manual workstation for rotor inspection, and a machine for rotor varnishing. Also included is an assembly line for assembling complete electric motors. Codpfx Aoz Epz Nocpjrh The lines are sold in working condition and are ready for operation.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, power: 15 kW (20.39 HP), total height: 2,300 mm, total length: 1,500 mm, total width: 900 mm, overall weight: 1,500 kg, table height: 955 mm, Equipment: CE marking, documentation/manual, motor brake, Vertical band saw / resaw Manufacturer: Stenner Type: ST 9 Heavy-duty vertical band saw for resawing and trimming of squared timber, planks, and boards Typical applications: sawmill, timber trade, carpentry, pallet manufacturing, planing mill Saw blade and rollers: Diameter of saw blade rollers: 915 mm Saw blade width: 100 mm Minimum saw blade length: 5280 mm Maximum saw blade length: 5380 mm Cutting performance: Maximum wood width: 370 mm Maximum cutting width (standard): 230 mm Maximum distance from saw line to fence: 305 mm Fence swivels 0 – 35° Drive and feed: Motor: 15 kW (optional equipment) Feed rate: variable, 7.5 – 30 m/min Dust extraction: Dust extraction port diameter: 150 mm Extraction volume: 1455 m³/h Dimensions and weight: Working height: 955 mm Cjdpfx Asz Eigfocpjrh Dimensions (approx.): 1500 x 900 x 2300 mm (L x W x H) Machine weight (approx.): 1500 kg Basic concept: - Vertical band saw for resawing and trimming of solid wood - Fence swivels 0 – 35° for bevel and wedge cuts - Feed rate can be adjusted variably from 7.5 to 30 m/min - Saw blade rollers 915 mm, saw blade width up to 100 mm - Wood type: softwood / hardwood

Condition: excellent (used), Guide plates 1250 mm long x 460 mm high, strong steel base frame with 2 guide shafts and 4 adjustment spindles each, can be mounted behind any type of gang saw, also 2 robust, toothed pressure roller devices with 4 ball bearings each to complement it Crjdsui Ifcjpfx Acpjh

Year of construction: 2019, condition: used, Operational machine. Ask for additional information. Second unit as well, vintage 2021. Credpfoy R U H Hox Acpjh

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: AM970083, Industrial arc spraying system Praxair TAFA CoArc 9910 / 9935 / TCV-400 For sale: a used industrial arc spraying system, Praxair TAFA CoArc 9910 / 9935 / TCV-400. Credpfoz Aakrjx Acpeh Praxair CoArc 9910: The central control console. It features a modern touch display, on which the operator can linearly set and monitor all parameters (voltage, current, wire feed speed, and atomizing air pressure). Praxair 9935: The associated arc spraying gun. It uses a pull principle (or push-pull in combination with the console) to feed the two metal wires precisely and smoothly into the arc. Maximum current capacity: 350 amps at 100% duty cycle. Wire diameter (standard): 1.6 mm (14 ga) or 2.0 mm (or 1/16 inch to 2.0 mm depending on the installed feed rollers and nozzle kits). Spraying rate (throughput): Up to 20 kg/h (e.g., with zinc or zinc-aluminum wires). Wire feed principle: Powerful air or electric motor directly in the gun (pull principle). TAFA TCV-400: The power supply (inverter) of the system. It is a robust, industrial rectifier (380V/400V connection) that provides constant voltage and the necessary energy to maintain the arc between the wires. The "400" indicates the maximum or rated capacity of the transformer, although the 9910 system is typically operated at up to 350 amps. NH14

Condition: repair required (used), Year of construction: 1987, machine/vehicle number: 90071000, bale width: 300 mm, bale height: 300 mm, overall weight: 15,000 kg, Currently, the “lateral pressure” is stuck because material (sheet metal) has shifted and become wedged under the side block. Crsdpfxsy Tlzaj Acpoh

Condition: used, Year of construction: 2021, functionality: fully functional, input voltage: 400 V, overall weight: 100 kg, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, type of cooling: water, input current: 16 A, laser power: 300 W, input frequency: 50 Hz, laser wavelength: 1,064 nm, travel distance X-axis: 120 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, continuous power: 9 kW (12.24 HP), Equipment: type plate available, We are selling a like-new ALM300. It underwent a complete service in September 2026 and a new laser unit, including a flash lamp, was installed. The price was €12,500.00 excluding VAT. Includes special equipment: Tilting-swiveling objective, LED-UW Ergonomic wedge, 5-25 degrees Aluminum light case Camera set ALFT-HDMI Optional, if required: Laser protection curtain, 2x 4300x2100mm, €3,000.00 Extraction and filter system LN 260 ZA-W3, €3,000.00 (filter in like-new condition) Laser safety glasses, 2x, €500.00 Crsdpfxozyzwns Acpoh New price: €130,000.00

Condition: used, This used META shelving unit is a compact and flexible storage solution for workshops, warehouses, archives, and businesses. With a height of 250 cm, a depth of 40 cm, and a total of 6 storage levels, the shelving unit offers ample space for the organized storage of boxes, containers, spare parts, and other storage items. The modular shelving system can be used in a variety of ways and enables efficient use of the available storage space. 30.06 linear meters of shelving, 40 cm deep, used, workshop shelving, warehouse shelving, manual storage, plug-in shelving, small parts storage. Data: - Height: approx. 250 cm - Depth: approx. 40 cm - Length: approx. 30.06 linear meters Shelving offer of 30.06 linear meters consisting of: - 031 x uprights approx. 200 x 40 cm, pre-assembled - 180 x shelves approx. 100 x 40 cm - 720 x shelf supports - 030 x cross braces - Manufacturer: META CLIP - Load capacity: 100 kg per shelf, with evenly distributed load - Levels: 6 x storage levels - Surface: Sendzimir zinc-plated - Used, available from stock -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: Crsdpfx Asz I Izaocpjh €2179.00 net plus applicable VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged through our partner shipping company upon request; the costs depend on the postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment, if required. Our recommendation: Please let us know your requirements… We will be happy to help you with the implementation of your projects, from planning and ordering to assembly. Are you interested or have any questions? Simply contact us via message or phone call. Our phone number can be found on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 133/SCS, cutting speed: 35,000 mm/min, working width: 1,250 mm, feed rate X-axis: 35 m/min, product width (max.): 1,250 mm, number of straightening rollers: 7, We are offering a very well-maintained Krasser CENTURIO 1250 stand-alone slitting line, manufactured in 2023, for sale. Highlights Reinforced 7-roll leveling unit Max. coil width 1,250 mm Cutting speed up to 35 m/min Suitable for longitudinal and transverse cutting as well as leveling of strip steel Modern control system with touch operation Very well-maintained condition Crodpfx Aezvgbqscpsh Ready for immediate use Technical data Manufacturer: Krasser Model: CENTURIO 1250 Type: Stand-alone slitting line Year of manufacture: 2023 Condition: Very good Max. coil width: 1,250 mm Min. coil width: 250 mm Description The Krasser CENTURIO 1250 is a powerful sheet metal cutting system for the precise processing of steel, stainless steel, aluminum, copper, and zinc sheets. The reinforced 7-roll leveling unit is particularly noteworthy, as it enables excellent leveling quality and reliable processing of a wide variety of materials. The system is currently still in operation and can therefore be inspected at any time by appointment while running. This offers interested parties the opportunity to directly verify the condition, performance, and functionality of the machine. The machine is expected to be available in the first quarter of 2027. The exact date may vary slightly depending on the project, but we currently anticipate a release around February 2027. Early reservation or coordination of the delivery date is possible and desirable. Contact For further information, technical details, or to arrange a viewing appointment, we look forward to receiving your message or call. Category ID: 1052 Type ID: 136 Type: Slitting line

Condition: as good as new (ex-display), PFAFF 8320 - 111/101 long-arm version with table Cedpfx Ajxa D Hrscpjrh

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) - Additional clamps - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Cjdjz Ady Dopfx Acporh Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: good (used), AK 200: The machine is equipped with: ✅ a foot pedal ✅ a shear bar ✅ a 10mm clamping bar ✅ Performance: 1mm steel sheet (also suitable for aluminum, copper, and zinc) ✅ Weight: approx. 750kg HS 200 The machine is equipped with: ✅ a back gauge ✅ extendable sheet metal support ✅ Performance: 1.25mm steel sheet (also suitable for aluminum, copper, and zinc) ✅ Weight: approx. 650kg Condition: • good technical condition Crodpfx Asz Dumhecpeh • good optical condition

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drive-away wedge. Credpfx Aez Engkscpeh 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: used, maximum load weight: 64,900 kg, overall weight: 94,100 kg, axle configuration: > 3 axles, first registration: 08/2021, Gooseneck, detachable * Loading platform: 3,750 mm x 2,480 mm * Maximum technical saddle load: 30,000 kg (without using the front axle) * Hydromechanical steering with multi-chamber hydraulic cylinder * Hydraulic lifting and lowering function * 2 support cylinders * Hydraulic differential lock * Operating elements for hydraulic functions on the left-hand side in the direction of travel, including a pressure gauge with a diagram for determining saddle load, as well as a pressure gauge for monitoring the pre-tension pressure in the steering system * Access ladder to the gooseneck * Hydraulic claw locking for the platform or axle * Multifunction quick coupler * Air gun for cleaning the multifunction quick coupler ---- Front 2-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,145 mm + 340 mm / - 260 mm * Additional lifting option for all axles in the front axle assembly * Floor covering: sheet metal * Additional warning sign holders, mounted on the front axle assembly ----Braking system with TIM Drum brake all-wheel drive air brake system with diaphragm brake cylinders * Automatic load-dependent brake (ALB) (AGS) * Parking brake by means of spring-loaded cylinders * EBS / ABS (Electronic Braking System) manufactured by KNORR-BREMSE * Socket for EBS on the front end of the gooseneck * Vehicle stability control RSP (Roll Stability Program) ----Flatbed platform, single telescopic * Two external box-shaped outer/inner beams * Height of the outer beams: 300 mm * Carrier width of the outer beams: 730 mm + 120 mm edge strip * Front end with coupling claws * Without floor covering between the two longitudinal beams * (L x W) 7,500 mm x 2,750 mm, telescopable by 2,800 mm to a maximum of 10,300 mm * With a separating point * Loading height, loaded: approx. 450 mm, ground clearance: approx. 150 mm * Including a short, permanently welded-on front ramp * And 1 pair of aluminum ramp wedges, at the front ----Rear 4-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,100 mm + 385 mm / - 215 mm * Floor covering: sheet metal ----Combined excavator-tipping body * (Length x Width) 5,770 mm x 880 mm/1,538 mm * Splash guard with water-absorbing mats on all axles * Aluminum partition sheet in the excavator body, front and rear, plug-in ----Load securing Gooseneck * 4 pairs of threaded sockets M30 * 1 pair of lashing points LC 20000 daN * 2 pairs of lashing points LC 800 daN Front axle assembly * 3 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 1 pair of threaded sockets M36 on the side (16,000 daN) * 1 pair of lashing points LC 20000 daN Loading platform, flatbed * 1 pair of lashing points LC 20000 daN * 3 pairs of lashing points LC 10000 daN * 3 pairs of threaded sockets M 30 * 3 pairs of threaded sockets M30 on the inner beam Crodpfx Aez Ivnujcpoh Axle assembly * 2 pairs of lashing points LC 10000 daN * 2 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 3 pairs of rail pockets 100 x 50 mm (LC 2000 daN) * 1 pair of threaded sockets M36 in the excavator body (16,000 daN) * 4 pairs of el