Used Weeke Venture 5 for sale (77)

Condition: used, Year of construction: 2004, number of axes: 4, controller model: POWERCONTROL PC85, working width: 1,220 mm, milling spindle speed (max.): 24,000 rpm, working length: 3,250 mm, TECHNICAL DETAILS Working area X-axis: 3,250 mm Working area Y-axis: 1,220 mm Number of working areas: 2 Table system: Pod-and-rail table Number of vacuum pod holders: 6 Number of controlled axes: 4 Number of drilling units: 1 Cjdezmtl Repfx Ak Aeri Number of milling spindles: 1 Number of grooving units: 1 Drilling unit Position: top Vertical drilling spindles: 12 Horizontal drilling spindles in X-direction: 4 Horizontal drilling spindles in Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Position: top Controlled axes: 4 Motor power: 12 kW Speed: 24,000 rpm Cooling: Liquid cooling Tool change: automatic Grooving unit Position: top Design: fixed, for producing grooves in the X-direction Maximum tool diameter: 100 mm Motor power: 2.2 kW Speed: 7,500 rpm Number of tool change stations: 16 Tool magazine on the machining head: 8 slots Tool magazine on the rear of the machine: 8 slots MACHINE DETAILS Control system: POWERCONTROL PC85 Programming software: WOODWOP 5 Main spindle power: 12 kW Total connected power: 22 kW Vacuum pump capacity: 100 m³/h EQUIPMENT CE marking Pod-and-rail work table 6 vacuum pod holders Vacuum pump Automatic tool changer 2 tool magazines, each with 8 slots Protective device for machining units with safety sensors Front safety mats Liquid cooling of the milling spindle The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 7716

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Credjwuz Dgspfx Ak Aei Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working width: 1,050 mm, working height: 100 mm, working length: 3,250 mm, TECHNICAL DETAILS Working length: 3,250 mm Working width: 1,050 mm Working height: 100 mm Drilling unit Vertical drilling spindles: 18 Horizontal drilling spindles, X-axis: 4 Horizontal drilling spindles, Y-axis: 2 Tool stations: 4 Position: rear MACHINE DETAILS Milling spindle power: 7.5 kW Operating voltage: 400 V Mains frequency: 50 Hz EQUIPMENT Grooving circular saw for X and Y direction, 90° Rear tool changer Csdpfx Aj Aggu Aok Aeri CE marking

Condition: used, Weeke Venture 06M machining center X-axis: 3130mm Y-axis: 1250mm Z-axis: 85mm 18 drilling heads (12 vertical and 6 horizontal) HSK milling spindle, 9kW Csdpfj Ahiuhsx Ak Ajri 8-position tool magazine Grooving saw Machine available immediately. Loading included in the price.

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Codpjwuclxjfx Ak Aori Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Crsdpfxsum H Eke Ak Asi Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13

Condition: used, Year of construction: 2013, WEEKE OPTIMAT ABD 150, manufactured in 2013. CNC-controlled drilling, gluing, and dowel insertion machine for furniture components. Equipment: - 3 individually controlled vertical drilling spindles, spacing 32 mm - 3 individually controlled horizontal drilling spindles, spacing 32 mm Crsdpfx Aj Afawbek Aji - Gluing unit with adjustable glue quantity - Dowel insertion unit for standard dowels 8 x 30 mm / 8 x 35 mm - Automatic dowel feed via vibration feeder - 4 upper clamping cylinders - Left, right, and center workpiece stops - Automatic central oil lubrication - powerControl with woodWOP and ABDWork Workpiece range: Length 20–1,250 mm, width 100–800 mm, thickness 10–60 mm. The machine is located in the TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). The original photos show the machine in its previous location. Inspection, functional testing, and detailed information on the scope of delivery are available by appointment. Price on request. Offer includes free loading onto a truck. Transport is subject to separate agreement. High-quality machines sourced from Germany, Austria, or Switzerland. Consulting and sales handled by DS-Maschinen in Stuttgart. PC and software as shown in the original photos: woodWOP 6.1; Microsoft Windows XP Embedded, Version 2002, Service Pack 3; Beckhoff C9900-I374 v1.1. Counter photo: Total operating time 24,701.5 h, production time approx. 1,806 h. The values refer to different types of counters and the status of the available recording.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Vector Speed: X/Y= 50m/min Vector Speed: Z = 15m/min Workpiece length: min. 200 mm Workpiece length: max. 3050 mm Workpiece width: min. 70 mm Workpiece width: max. 850 mm Workpiece Thickness min: 8mm Workpiece Thickness max: 56mm Drill Block with 13 Vertical Spindles Drill Block with 4 Horizontal drills in the X Direction Drill Block with 2 Horizontal drills in the Y Direction Grooving Saw X Direction Cedpfj Acw Hnox Ak Ajri Plausibility Check 5Kw Tool Change Spindle 4 Position Tool Changer Energy Saving Mode 400V 50Hz CE Marked

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Cjdpfex Ey H Isx Ak Asri

Condition: good (used), Year of construction: 1998, functionality: fully functional, Weeke through-feed drilling machine BST 500, with drilling heads on the right and left sides, 5 units underneath, none above. 5 drilling machines in stock, sold individually. Cjdpfx Aszb El Hek Aori

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-250-04-1744, functionality: fully functional, input voltage: 400 V, number of axes: 4, number of slots in tool magazine: 8, total length: 7,500 mm, total width: 4,600 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, For sale: Weeke Optimat BP 150, the largest model, a 4-axis, liquid-cooled machining center with 12 beams and two vacuum pumps, one of which has undergone a major overhaul. The machine is in continuous operation. The gross price includes 23% VAT. This is a reliable and durable machine; parts are readily available through the Hommag network and on the open market at very reasonable prices. I recently replaced the vertical drive shaft and other minor parts. It is a solid, heavy-duty, and rigid machine. The headstock covers are removed but are included as a complete set. The machine is still in continuous operation, working at 25% capacity. It has 12 vertical drilling units in the X-axis, 24 vertical drilling units in the Y-axis, and 12 horizontal drilling units. It also includes a grooving saw and a milling cutter. Two safety mats require repair or replacement. The price is 5,000 Euros, and loading onto a truck costs 890 Euros. I am selling it because I am closing my business due to my age. Codpfsz Tfiasx Ak Aeri

Condition: used, Year of construction: 2008, machine/vehicle number: 0-250-19-0287, functionality: fully functional, input voltage: 415 V, input current: 125 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 1,500 mm, workpiece width (max.): 3,000 mm, workpiece height (max.): 60 mm, actuation type: electric, total height: 2,760 mm, total length: 5,280 mm, total width: 7,150 mm, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, The PROFI BHT 500 drilling center is equipped with 2 upper tool heads. Csdpfx Aszyp Tksk Ajri Each head includes: a) two sets of vertical drills with a 32mm spacing: 17 spindles in the Y-axis, 15 spindles in the X-axis, and an additional 4 horizontal spindles in the Y-axis. b) an electric spindle unit with a power of 5kW and an ISO30 chuck. The machine also features two horizontal drilling units, each consisting of: two units equipped with 9 spindles with a 32mm spacing, and 2 glue guns for applying adhesive and furniture dowels. Belt conveyors at the infeed and outfeed points allow for manual loading of parts, and the machine can also be operated in a production line.

Condition: good (used), Year of construction: 2011, functionality: fully functional, feed length X-axis: 2,500 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 60 mm, Technical description of the machine The machine is designed for the precise machining of furniture and carpentry components using multi-spindle drilling technology. Thanks to its large working area and CNC control, it provides high productivity, repeatability, and accuracy in production. Operating parameters Maximum width of the workpiece: 2,500 mm Maximum working depth: 1,000 mm Maximum height of the workpiece: 60 mm Drilling grid: 32 mm Infinitely adjustable feed rate, allowing for optimal parameter adjustment to the type of material. Drilling system The machine is equipped with: 7 vertical drilling heads 7 bottom-mounted drilling heads 2 horizontal drilling heads 2 drilling blocks per head, enabling the simultaneous execution of multiple operations. The positioning of the blocks and drilling heads is manual, while the drill feed is pneumatic, ensuring a fast and repeatable work cycle. Clamping system 7 clamping bridges guaranteeing stable clamping of the workpieces during the entire machining process. Control The machine operates under the control of: HOMAG POWER CONTROL HOMAG WOODWOP software, which enables intuitive programming of operations and integration with the production process. Electrical data Total connected power: 49 kW Additional information CE marking for conformity. Cjdpfx Aezi E Ebek Ajri The machine’s design ensures high drilling accuracy and reliability in the serial production of furniture components, fronts, bodies, and other wood and wood-based components. Thanks to its large working area and extensive drilling system, the machine is ideally suited for both single-item and large-scale production.

Condition: used, Year of construction: 2002, Used Machine Year of Manufacture: 2002 Features and Technical Specifications - CNC machining center for drilling, milling, and grooving operations - HOMATIC 2000 control system with woodWOP for convenient, workpiece-oriented programming - Liquid-cooled milling spindle for consistent operating temperatures and reliable operation at high cutting rates - HSK 63 tool holder with high clamping force for precise machining - Automatic tool changer - Digital axis drives - Positioning accuracy according to the manufacturer: 0.03 mm - Travel speeds X/Y/Z: 80/60/20 m/min - Travel range of the Z-axis: 370 mm - Maximum workpiece thickness: 100 m - Working length X/Y: 3,250/1,300 mm - Usable machining area depends on the tool and unit - Electrical power consumption: 14–22 kW, depending on configuration - Vacuum pump capacity according to brochure: starting at 100 m³/h - Compressed air connection: R 1/2 - Required compressed air pressure: 7 bar - Central exhaust connection: Ø 250 mm Cedpfs Af I Uwex Ak Aori - Required extraction capacity: at least 4,950 m³/h Additional features: - Vertical drilling spindles, individually controllable - Horizontal drilling spindles in the X and Y directions - Groove saw unit - 8-position tool changer, moving in the X and Y directions, for short tool change paths - C-axis for freely programmable positioning of compatible units from 0–360° - Crosshair laser as a positioning aid for quick setup - Cantilever table with freely positionable, hose-less vacuum suction cups; alternatively, a base or matrix table - For the console table version: workpiece loading aids, lowerable stops, and electric vacuum monitoring - Weight: approx. 4,500 kg Machine is available for demonstration in 15528 Spreenhagen The connected SCHUKO VacoVent 750 dust collector is also available for purchase: samstag.gmbh/maschinenbestand/1333-5931

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: chip conveyor, documentation/manual, We are offering this ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2003. Codpfx Ajx Nw Drjk Asri Manufacturer: Weeke Model: Optimat BHC 550 Year of manufacture: 2003 Condition: ready for operation Machine type: machining center If you have any questions or need more information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1997, functionality: fully functional, input current: 50 A, number of axes: 3, number of slots in tool magazine: 12, total length: 5,000 mm, total width: 2,900 mm, overall weight: 4,500 kg, Equipment: CE marking, documentation/manual, CNC milling machine with a tool magazine for 12 tools, featuring a vacuum clamping system to secure the workpiece, and includes a vacuum pump. Crsdpoza U Nxjfx Ak Aei

Condition: used, Year of construction: 2002, functionality: fully functional, 4-axis machine with WOODWOP 4.5, from a carpentry workshop Working dimensions: X-axis 3,200 mm Y-axis 1,250 mm Work table: 6 pcs workpiece supports, each with 3 vacuum cups 4 pcs lifting rails for heavy workpieces 1 rear and 1 front stop row Vacuum pump 100 m³/h Tool arrangement: Main spindle 7.5 kW HSK 63 F with water cooling Speed 1,500 - 18,000 rpm with C-axis / positioning axis for adapter tools Drilling unit with 18 vertical spindles 6 drilling spindles horizontally Dado saw unit fixed in the X-direction Tool changer magazine, 8 positions, mounted at the rear of the support, moving in the X-direction, for milling tools and units Control: HOMATIC 2000 with WOOD WOP 4.5 Safety equipment: ----- * Foot mat protection in front of the machine Without tools Csdpfe Afh Izox Ak Ajri

Condition: used, machine/vehicle number: 008176, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Credpfe Ahwxzox Ak Aji Total number of drilling spindles: 25 Total number of tool changer positions: 4

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, The HOMAG WEEKE OPTIMAT ABD 150 is a high-performance CNC machine designed for precise drilling, dowel insertion, and hardware fitting in furniture production and panel processing. This machine is ideal for cabinet makers, furniture manufacturers, and industrial woodworking operations requiring accurate and efficient automated processing. The machine features: Crjdpfxsym Nvts Ak Aoi CNC-controlled drilling and inserting unit Integrated glue and dowel insertion system Robust industrial construction Compact footprint Easy-to-use control panel CE certified The machine has been regularly maintained and is ready for operation.

Condition: used, Year of construction: 2012, Automatic CNC machining center for efficient and precise drilling and milling of panel furniture components wooden PC 85 numerical control - woodWOP 6 software Safety cabin for the working head N. 2 clamps for blocking and moving the piece during machining Loading bench by air curtain table Minimum dimensions of the piece (X - Y - Z) mm 250 x 100 x 8 (2 x 4 mm) Maximum dimensions of the piece (X - Y - Z) mm 3000 x 1000 (optional mm 1300) x 80 (2 x 40 mm) Possibility of processing two panels simultaneously N. 2 working heads (one lower and one upper) composed as follows: * Upper vertical work head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) * Bottom vertical working head N. 1 ETP-6 vertical electrospindle (power Kw 6) N. 1 Grooving saw (90° on the X-Y axis) dia. 125mm N. 32 vertical drilling spindles (power Kw 2,7) N. 10 Horizontal drilling spindles (8 in X + 2 in Y) Evacuation of the panel (panels) by motorized belt roller conveyor Security system with perimeter grilles and frontal safety mats Crjdpfx Aksvz A E To Aji

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Cedpox S Hzlefx Ak Aeri Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 4,300 mm, rotational speed (max.): 24,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Travel range X-axis: 2,500 mm Travel range Y-axis: 4,300 mm Maximum workpiece clearance: 60 mm Spindle speed, milling unit 1: 24,000 rpm Spindle speed, milling unit 2: 24,000 rpm Spindle speed, milling unit 3: 24,000 rpm Number of controlled axes, milling unit 1: 4 Number of controlled axes, milling unit 2: 3 Number of controlled axes, milling unit 3: 3 MACHINE DETAILS Number of work zones: 2 Number of grippers: 9+4 Motor power, milling unit 1: 12 kW Motor power, milling unit 2: 12 kW Motor power, milling unit 3: 12 kW Tool magazine 1: 14 positions, located on the side of the machine Tool magazine 2: 14 positions, located on the side of the machine Crodpexw Ugdsfx Ak Aoi EQUIPMENT Grippers for holding the workpiece Automatic panel loading system Motorized transfer Automatic tool changer Printer for barcode labels CE marking Machine-mounted safety fences Note: Tools and the automatic chip extraction system are not included in the offer.

Condition: used, machine/vehicle number: 008744, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Credpfjz Ig Ufjx Ak Aei Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PC 85 (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet - Total installed power (Kw) 20 (ca.) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) In-feeding working table (panel support) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 100 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-25 (power Kw 6) Codpsziapbjfx Ak Ajri No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-25 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 32 Vertical drilling spindles (power Kw 2.7) No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: used, machine/vehicle number: 008166, X axis working area: 4250 mm Y axis working area: 1250 mm Working Table: Pod and Rail Codpfx Aksyy U S Io Aori Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 25 Total number of tool changer positions: 14