Used Welded Beam for sale (9,403)

Condition: used, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Level indicator (without guarantee) Design: vertical External diameter: 2,000 mm Internal diameter: 1,800 mm Total height: 5,200 mm Insulation: present Max. excess pressure: 5.00 bar Support type: height-adjustable feet Location: Bremen Technical documents: Drawing, TÜV certificates Nameplate: Volume: 10,000 liters Cylinder wall thickness: 5 mm Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,000 mm Previous use: Ice water tank in a dairy plant Dcedpfoxqcpyjx Ab Uof TANK Max. permitted operating temperature: 20 °C Number of feet: 4 pcs INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the cylinder Outlet: pipe end approx. Ø 40 mm Note: slight residues, outlet end cut off MATERIAL SPECIFICATION Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm

Condition: used, Year of construction: 2006, tank capacity: 10,000 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Year of manufacture: 2006 Remarks: Nameplate no longer available; cylinder manhole diameter 600 mm; minor dent on the side of the vessel Internal diameter: 2,500 mm Total height: 3,800 mm Power: 3 kW Djdpfxjx Dmbae Ab Uecf Top head: Flat bottom Agitator: Beam agitator Support design: Height-adjustable feet Location: Outdoor storage Technical documentation: Drawing Volume: 10,000 liters Cylinder wall thickness: 3 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: Used Cylindrical height: 2,000 mm Last product processed: Sludge VESSEL Max. allowable operating temperature: 80 °C Specific gravity of medium: 1.8 (to/m³) Bottom head: Conical bottom Number of feet: 3 pcs EQUIPMENT Manhole/Dome: In cylinder, in top head (Ø 430 mm) Outlet: Flange DN80 Note: Minor residues MATERIAL SPECIFICATION Foot material: Stainless steel AGITATOR 1 Agitator manufacturer: Fluid Voltage: 380/660 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Agitator positioning: Eccentric in top head

Condition: used, tank capacity: 14,000 l, GENERAL Equipment: Spray head Design: upright Remarks: Insulation around top head and cylinder, not around bottom head; spray head connection slightly bent and weld seam on the top head cracked; discharge pipe internal diameter approx. 50 mm, widens towards its cut-off end to approx. 65 mm Speed: 13 / 26 rpm External diameter: 2,700 mm Internal diameter: 2,480 mm Total height: 4,100 mm Insulation: present Power: 1.5 / 2.2 kW Agitator: beam agitator Agitator component: agitator flange Type of stand: height-adjustable feet Location: Bremen Volume: 14,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,350 mm Last application: Dairy TANK Number of feet: 4 pcs INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manhole / Dome: in cylinder (approx. 350 x 450 mm) Outlet: present MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR 2 Agitator arrangement: side-mounted on cylinder Dcedpjxqc S Ujfx Ab Ujf AGITATOR 1 Voltage: 400 Volt Bottom bearing:

Condition: used, Year of construction: 2004, tank capacity: 8,000 l, GENERAL Equipment: Crane lugs Design: Vertical Year of manufacture: 2004 Outside diameter: 2,200 mm Total height: 3,700 mm Insulation: Present Agitator: Beam agitator Location: Outdoor storage Nameplate: Volume: 8,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: Used TANK Dodpsyciwiofx Ab Uecf Support type: Height-adjustable feet INSULATION Insulation jacket: Hermetically welded FEATURES Manhole / Dome: In the top head Outlet: Present AGITATOR Agitator arrangement: Eccentrically mounted in the top head

Condition: used, tank capacity: 10,000 l, GENERAL Equipment: Crane lugs Design: Vertical Insulation: Available Agitator: Beam agitator Location: Outdoor storage Nameplate: Volume: 10,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: Used TANK Support type: Height-adjustable feet Number of feet: 3 pcs INSULATION Insulation jacket: Hermetically welded EQUIPMENT Manhole / Dome: In the upper head Outlet: Present AGITATOR Bottom bearing: Dcjdpfx Abjyciwpe Usf Agitator arrangement: Eccentric in upper head

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Features: Air/ventilation system, disc valve Design: vertical Speed: 0 - 85 rpm Internal diameter: 820 mm Total height: 1,850 mm Power: 0.75 kW Dcjdpfxsxqc S Ie Ab Ujf Max. viscosity: 5,000 mPas Top: agitator traverse with folding lid Agitator: blade agitator Base design: PE base Location: Bremen Technical documentation: drawing, CE marking and declaration of conformity, assembly instructions, operating manual Nameplate: Volume: 550 liters Product-contact material: V2A 1.4301 (AISI304) Condition: factory-new Cylindrical height: 1,034 mm TANK Max. permissible operating temperature: 80°C EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION External surface: marbled Internal surface: high gloss Material of feet: plastic AGITATOR 1 Voltage: 400 V Agitator arrangement: eccentric in top plate Agitator features: NORD frequency inverter 400V IP55 NORD helical gear unit made with latest aluminum technology Gear unit with stainless steel seal flange and oil leakage indicator Gear unit filled with food-grade Klüber oil Gear motor unpainted

Condition: used, tank capacity: 60,000 l, GENERAL Equipment: Venting, spray head, crane lugs Design: Upright Outer diameter: 3,880 mm Inner diameter: 3,700 mm Total height: 9,200 mm Insulation: available Agitator: Beam agitator Base type: Skirted base Location: Outdoor storage Volume: 60,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous application: Food TANK Bottoms: Conical bottom EQUIPMENT Manhole / dome: in the shell AGITATOR 1 Dcjdpfex Dmcqjx Ab Ujf Bottom bearing: Agitator arrangement: eccentric on top head

Condition: used, GENERAL Heat exchange surface: 4.0 m² Insulation: available Other information: Heat exchange surface: 4 (2 x 2) m² Side A: Volume: 9 liters Permissible operating overpressure: 7 bar Permissible operating temperature: -40/+20°C Dodpfx Asxqclbob Ujcf Side B: Volume: 29 liters Permissible operating overpressure: 8 bar Permissible operating temperature: -40/+20°C Location: Bremen Nameplate: Condition: used Last application: Pharmaceutical chemistry INSULATION Insulation material: Armaflex

Condition: used, Shielding Gas Welding Machine MIG-O-MAT Type U 405 Serial No. Year of manufacture 1991 Output 400 amps = 60% duty cycle 280 amps = 100% duty cycle Adjustment range 18 steps Torch hose length 5 meters Power supply 380 V, 50 Hz, 32 amp plug - Spot and interval welding function - 2-stroke and 4-stroke welding functions - Wire feed with 2-roller drive Dcjdpfxoyy Dfqj Ab Uef - Water-cooled - Shielding gas pressure regulator - Supplied with 1.2 mm welding wire Dimensions L x W x H: 1300 x 500 x 900 mm Weight approx. 200 kg In good condition

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The newly developed filtoo filter unit from TEKA is a mobile filtration system suitable for a wide range of applications involving the filtration of fumes, dust, and gases. It is also suitable for high-alloy steels (stainless steel). The unit has been tested according to DIN EN ISO 15012-1 (2005) and is IFA ( formerly BGIA) certified (IFA No. 201020469/1140) for welding fume class "W3" (separation efficiency: > 99.9%). Where can the SIG 230 filtoo be used? - at welding workstations - in workshops - for soldering applications - by restorers - in metalworking shops Features: - BGIA-certified extraction and filtration system Dcjdpfx Ajxaal Rjb Uef . IFA 1005030 for extraction . from high-alloy steels Steels & Non-ferrous Metals - Operating instructions in German Optional equipment available at extra cost (recommended) - STAVO retrofit kit (dust pre-separation) - For FILTOO with spark guard and collection tray Note: - This unit is only used for extracting dry dust/fumes - Read the operating instructions before initial use

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Manufacturer: Kemper, mobile welding fume extraction system type Eco M Dcedpfxjx I Aknj Ab Uef -Drive: 0.75 kW -Max. volume flow: 1650 m³/h -Max. pressure increase: 2100 Pa -Extraction arm: Ø 150 mm x 5000 mm -Fan wheel: Ø 290 mm x 60 mm -Quantity: 3 pieces available Price: per piece -Transport dimensions: 1200/800/H780 mm -Weight: 38 kg/pc.

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Dcjdpfxoxf Up Io Ab Usf

Year of construction: 2013, condition: used, Make: PAUL VON DER BANK GMBH, Type: Robotic Welding System, Year of manufacture: 2013, Serial No.: 13.536, Welding source, make Fronius, type CM TransPuls Synergic 4000, Cooling unit, Welding unit VR7000CMT, Programming terminal RCU5000I, Positioner table, Welding robot, make KUKA, type KR5-2ARC, Robot controller KRC4, Extraction system, make Plymovent – System not connected. Dcedpfoyx Exvsx Ab Uef

Condition: used, table length 1500 mm table width 1500 mm table height 200 mm Dcedpfxeyy A Hme Ab Uof weight of the machine ca. 750 kg

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: SINUMERIK ONE NCU 1750, _____ Description: Year of manuf. : 2022 Control : Siemens SINUMERIK ONE NCU 1750 In general: System:Industrial DED system Safety:Vacuum lock and inert gas purging Year of manufacture:2022 Weight:approx. 7,500 kg Geometry: Number of axes:5-axis kinematics with automatic tool changer Travel ranges (x/y/z):650×400×400 mm Table diameter:400 mm Table load capacity (max.):100 kg Measurement:Renishaw probe Lasers & Optics: Laser:Dual IPG laser Fine machining:500 W (IPG fiber laser, 200 µm fiber) High build-up rate:2000 W (2 kW) (IPG fiber laser, 600 µm fiber) Optics:Precitec YW 30 optics with VX10/VX24 nozzles for standard and micro cladding Control unit: Control:SINUMERIK ONE NCU 1750 (SW 6.14) on a 24" SIMATIC touch panel Process preparation:Via Siemens NX CAM and edge computing (IPC 427e) Monitoring:Live process control via HMI Display Manager and sensors for the chamber atmosphere Electrical specifications: Total power:62 kW. Current:110 A. Dcodjyy Hgkspfx Ab Uef Voltage:3×400 V / 50 Hz (control circuit Materials used: Material:Two Medicoat powder conveyors for titanium (Ti64), nickel-based alloys, steel, and hard materials

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 4 004 .433 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/270/H145 mm Dcsdpsyxm R Tefx Ab Uef -Weight: 20.1 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit Dsdpjyxm Rtsfx Ab Uecf -Welding transducer/horn: Type R2003474 -Ultrasound sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 515/160/H115 mm -Weight: 18.9 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 92420 353324 -Horn: Type 2.0 Dcjdpfxsyxm Ras Ab Uef -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H120 mm -Weight: 6.1 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode Dsdpfxjyxm Ixe Ab Uocf -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 92420 353324 -Horn: Type CTC205708 -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H83 mm -Weight: 4.6 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos -Number: 3x ultrasound transducer units available -Price: per piece Dsdpfxjyxm Hne Ab Uocf -Dimensions: 450/100/H145 mm -Weight: 15.7 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos -Number: 3x ultrasound transducer units available -Price: per piece -Dimensions: 450/100/H70 mm -Weight: 4.8 kg/pc. Dcodpjxyw H Esfx Ab Usf

Year of construction: 2002, condition: good (used), Make: HAEUSLER Type: Crocodile Year: 2002 Specifications Metric US Standard Min. shell inner diameter 1500 Max. shell inner diameter 6000 Dcedpfokwcnzex Ab Usf Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 20 mm Maximium wall thickness 70 mm Max. section weight 30 T Max. weight total workpiece 120 T Dimensions (Estimate) Length 60000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Year: 2007 Specifications Metric US Standard Min. shell inner diameter Dedpfx Abskwcn Eo Ujcf 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight 15 T Max. weight total workpiece 60 T Dimensions (Estimate) Length 24000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, MIG / MAG Pulse Shielded Gas Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Item No.: 4.075 Serial No. Year of manufacture: approx. 2000 Output: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 50 V Open-circuit voltage: approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding processes: MIG/MAG/TIG (program and manual operation) Dsdpfx Abjyxy Tbj Uocf 2-stroke, 4-stroke, 4-stroke special, and spot welding - Separate 4-roller wire feeder FRONIUS Type VR 152 with approx. 1.5 m interconnection hose package - 4 m hose package with new central connection - External Fronius water cooling unit Type FK 71 - New welding gas pressure regulator - Welding machine equipped with 1.2 mm welding wire Dimensions (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration Also suitable for TIG and stick welding. Additional equipment for TIG and stick welding not included.

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, spot and projection welding machines, AC welding current control, welding current control, welding control Dedpfeyxc A Sox Ab Ujcf -Manufacturer: HiE, welding current control for spot and projection welding machines -Type: Accent T-500 / L050 -Imax: 500 A -Technical data: see photo datasheet -Dimensions: 250/160/H100 mm -Weight: 1.5 kg