Used Welded Beam for sale (9,372)

Year of construction: 2002, condition: excellent (used), Weld length: 1600 mm For pipe diameter: 150 - 800 mm Sheet thickness: 0.5 - 3 mm Electrical connection: 400 V, 27.5 kVA Fgsdpfx Aasyfgage Asa Weight: 1850 kg Required space: 3400 x 1000 x 2300 mm

Condition: used, functionality: fully functional, type of input current: three-phase, total height: 670 mm, total width: 420 mm, total length: 800 mm, input voltage: 400 V, ground cable length: 4,000 mm, overall weight: 85 kg, hose package length: 3,500 mm, electrical fuse: 16 A, welding current (max.): 210 A, Equipment: type plate available, Fronius Vario-Star 210 MIG/MAG Shielded Gas Welding Machine 210 ampere shielded gas welding machine 3.5 meter torch hose package 4 meter ground cable 0.8 mm wire spool Pressure regulator Additional accessories for aluminum welding Operating manual with spare parts lists Technical Specifications: Maximum welding current: 210 A at 60% duty cycle 2-roll wire feed for steel / aluminum / stainless steel Ø 0.6 / 0.8 / 1.0 mm 10-step rotary switch for voltage selection Stepless wire feed adjustment 2T and 4T trigger modes Spot welding function Interval welding function AL2300 torch for 0.8 mm wire with 3.5 m gas-cooled hose package Connection: 3-phase, 400 V / 16 A Dimensions (L x W x H): 800 x 420 x 670 mm Weight: 85 kg Accessories: Various contact tips, nozzle holders, nozzles, stop for spot welding Including setup for aluminum welding: 1x aluminum wire spool 1 mm 2x feed rollers for 1 mm wire 1x AL2300 torch G/F/3.5m for 1 mm with 3.5 m gas-cooled hose package The machine is ideally suited for sheet metal welding and is often used in automotive repair workshops. It can also be used for rapid battery charging and jump-starting vehicles. The machine can be tested under power during our business hours or by appointment. Fgedpfxjyzztno Aa Aoa Sale due to upcoming retirement.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 5,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current (min.): 25 A, welding current (max.): 400 A, Used Lorch S5 SpeedPulse – Water-cooled TwinPulse Mig 3 Months Warranty Refurbished, tested, serviced, and ready for inmediate use. Specs: 25-400 AMP 380 Volt Pulse / TwinPuls SpeedPulse / Twin SpeedPulse SpeedArc / SpeedUp Water-cooled 2/4 Step / 4 Roller drive Pre gas / Post gas Start current / End current Fixed programs / Program memory Including: 4 Meter SB501XW Welding torch, earth work cable, gas cable, and 10 meter interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Fgodoyylpkjpfx Aa Aja We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F17/5BTZA1/A/01, arm reach: 800 mm, load capacity: 2 kg, empty load weight: 100 kg, number of axes: 4, TECHNICAL DETAILS Number of axes: 4 Fgsdsyuaylepfx Aa Aoa Reach: 800 mm Payload: 2 kg MACHINE DETAILS Control: Teach-in Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,300 mm Unladen weight: 100 kg Transport packages: 1 EQUIPMENT CE marking

Condition: good (used), Year of construction: 1995, Rated power: 63 kVA Thrust: 520 mm Electrode arm distance: 200 mm Welding capacity for steel: approx. 7 + 7 mm Fgedpfowurw Rsx Aa Aea Welding capacity for non-ferrous metals: approx. 2 + 2 mm Electrical connection: 380 V kW

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine Fodpjycv Saefx Aa Aoga - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg As-new condition

Condition: used, Welding current at 25% duty cycle: 250 A Welding current at 100% duty cycle: 110 A Welding current continuously adjustable: 5 - 250 A Electrical connection: 380 V Fgodpfjwvgg Nox Aa Aea Space required: 650 x 600 x 1100/1500 mm high Weight: 55 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Equipment: type plate available, Year of manufacture 1994, modernized by the machine manufacturer KUKA in 2012. The system is equipped with a turning unit, bead punching unit, and a tube feed unit for unloading the welded components. We can adapt this system according to customer requirements. A complete retrofit is also possible. Fgodpfx Aasx I Efbj Aoa

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Fgodpfourlcrox Aa Aea Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, input voltage: 400 V, The KEMPER Filter-Master XL welding fume extractor was manufactured in 10/2021. It is connected via 400V, 16A three-phase power. An air compressor must also be connected, providing 5-6 bar compressed air to the unit. The extraction hose is fully adjustable, allowing for comfortable operation. The device has been function tested and comes with an electrical inspection carried out by a certified electrical company. Fodpsyy Squofx Aa Asga

Condition: new, Year of construction: 2026, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Fedpfeizr Rlox Aa Asga Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: used, Year of construction: 2007, weight max. 20 t clamping width 15065 mm stroke / mm ABUS electric wire rope hoist type: GM5200H6 - 161.41.103.D Span width: 15065mm Rope - nominal diameter: 14.0 mm Rope length: 47.95 metre Construction: Special electric hoist rope SKZ 8-P Surface of wires: galvanised Construction: low tension Type of lay / direction of lay: cross lay / right hand lay Nominal strength of single wires: 2160 N/mm² Calculated breaking load: 240.0 KN Minimum breaking load: 209.5 KN Number of load-bearing wires in the outer strands: 152 Fgodpfx Aoudditea Asa Trolley Year of manufacture: 2007 Trolley track: 1600mm Trolley weight: 1260kg Number of wheels: 4 pieces Running wheel diameter: 200mm Running wheel rotation: 52mm Operation: Floor operation via push-button switch Control: Electric Cross travel trolley Speed: 5.0/20.0 m/min Power: 14 /.65kW Duty cycle: 20/ 30 %ED Protection class: IP 55 Brake: Disc brake Lifting gear Speed: 4.00 / .66 m/min Power: 15.10 / 2.40 kW Duty cycle: 30/20%ED Protection class: IP 55 Brake:Disc brake

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. Fedpfxoyx Hpie Aa Ajga 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 11,755 h, functionality: fully functional, machine/vehicle number: 12543, type of input current: AC, load capacity: 1,000 kg, input voltage: 400 V, type of cooling: water, Severt Welding Robot OTC-IRB-AX-V 6 L - Suspended 6-axis arm on 8m traversing system - OTC Daihen controller, software update from AX-C to AX-2 - 2 stations, each with a 1-axis positioner rated for 1000kg load and 1000Nm torque - Power source: OTC DP 500, 100% duty cycle at 350A, 60% at 500A Fsdpfx Aasydc Eio Ajga - Push-pull torch - Touch sensor - Seam tracking sensor - Water-cooled gas nozzle - Wire feeding via rolliner - Torch alignment gauge included - Various accessories: hose packages, wire guide spirals, contact tips, gas nozzles, etc. Dismantling / transport, etc. is to be arranged by the buyer.

Condition: used, functionality: fully functional, Multi-function welding machine (MIG, TIG, electrodes) Brand: Kemppi Model: Pro 3000 / Promig 500 Water-cooled unit with Kemppi PRO Cool 10 chiller. TIG/electrode welding unit Kemppi PRO TIG 410 - Kemppi TL control panel - Functions for TIG welding: pre-gas, post-gas, arc, high frequency TIG generator Kemppi Pro 3000 MIG/wire welding unit Kemppi PRO MIG 500 - Duty cycle: 500A - 60% - Kemppi ML SYNERGIC control panel - 4 feed rollers - Pulsed arc current with Synergic panel - Dedicated functions for welding steel, stainless steel and aluminum Fgedpexf Hv Hofx Aa Aja Includes: - TIG welding torch - MIG welding torch - Earth cable - Gas regulator

Condition: excellent (used), Year of construction: 2009, Brand: Oerlikon / SAF Model: LP100 Year 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm. Turning speed: 100-1200mm/min. Wheel width: 235mm Wheel diameter: 450mm Fjdpfelffdysx Aa Asga Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Power: Three-phase 380V They have manual and Ce.

Condition: new, load capacity: 2,000 kg, rotary table diameter: 1,300 mm, pivoting range: 120 °, Capacity: 2,000 kg Max. height center of gravity: 250 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1,300 mm Fodpfx Aouf Nm Hja Ajga Motor power: 1,1 + 1,5kw Table tilt (Motorized): Tilt speed 0.67 rpm Rotation speed: 0.12 - 1.2 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: new, load capacity: 10,000 kg, rotational speed (distance/time): 1,000 mm/min, Capacity: 10Tn Type: Self-aligning Minimum diameter: 320 mm Maximum diameter: 2.800 mm Wheel dimensions: 300 x 160 mm (Diameter x Width) Wheel coating: Polyurethane rubber Rotation speed (Min.-Max.): 100 - 1.000 mm/min. Motor power: 1,1 KW Fgsdpfouf A Ahsx Aa Aoa Inverter: Danfoss Electrical components: Schneider Included: 1 motor-driven + 1 idler Control unit with 6 meter extension pole and digital display with the speed of rotation.

Condition: new, load capacity: 5,000 kg, rotary table diameter: 1,500 mm, pivoting range: 120 °, Capacity: 5,000 kg Fsdpfsuf Nu Rjx Aa Aoga Max. height center of gravity: 300 mm Max. center of gravity eccentricity: 200 mm Table diameter: 1.500 mm Motor power: 2,2 + 3kw Table tilt (Motorized): Tilting speed 0.14 rpm Rotation speed: 0.05 - 0.5 rpm Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-120 Drive: Danfoss Electrical components: Schneider

Condition: new, load capacity: 300 kg, rotary table diameter: 600 mm, Capacity: 300 kg Max. height center of gravity: 200mm Max. eccentricity center gravity: 150mm Fjdpfxouf Nk Ej Aa Ajga Table diameter: 600 mm Motor power: 0,37kw Table tilting: Manual, by handwheel Rotation speed: 0,1 - 1,0 rpm Manual operation: By foot pedal (right and left hand rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0-90 Drive: Danfoss Electrical components: Schneider

Condition: new, load capacity: 100 kg, rotary table diameter: 400 mm, Capacity: 100kg Max. height center of gravity: 150mm Max. eccentricity. center of gravity: 100mm Table diameter: 400mm Motor power: 0,2kw Table tilt: Manual, by handwheel Rotation speed: 0.4 - 4.0 rpm Fgodpfx Aouf Niuoa Aoa Manual operation: By foot pedal (right and left rotation) Automatic operation: By means of selector on control panel Angle of inclination (degrees): 0 - 90 Inverter: Danfoss Electrical components: Schneider

Condition: new, Year of construction: 2023, Positioner powered by three-phase current Rotation of table and arm by means of hydraulic swivels Height adjustment of the arm by means of a hydraulic cylinder Controlling functions on the positioner housing Useful in positioning parts in: welding cleaning assembly Increasing work efficiency up to 40% Fsdshtq Rispfx Aa Aega The use of unlimited rotation in 2 axes and, in addition, vertical and horizontal movement, allows any positioning of the attached workpiece (also "overhead"). The 3-axis positioner provides a significant improvement in work culture compared to traditional pan/tilt positioners (optimal positioning of the workpiece, easy operation). Advantages and benefits: For the employer: increased labor productivity by up to 40% through optimum positioning of workpieces - resulting in short amortization time of the device increased production efficiency does not require additional space on the shop floor better quality of welded joints - always possible to weld in the sub-lower position robust design of the device ensures long-term, trouble-free operation For the operator: ensuring ergonomic posture for the working person minimizing the risk of accidents - no changes in the fixing of objects no interruptions in work caused by waiting for the crane easy installation and operation It is possible to fully automate welding by using Kawasaki welding robots. We also offer positioners with a robot and integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE TO OPERATE THE POSITIONER PEDAL WITH CABLE FOR OPERATING THE TABLE ROTATION STEPLESS ADJUSTMENT OF THE SPEED OF TABLE ROTATION AND ARM ROTATION FUNCTION OF CONSTANT TABLE ROTATION LENGTH AND SHAPE OF THE ARM SIZE AND SHAPE OF THE TABLE ROTATIONAL MASS We can make the positioner according to the customer's individual guidelines.

Condition: new, Year of construction: 2023, Positioner powered by three-phase current Rotation of table and arm by means of hydraulic swivels Height adjustment of the arm by means of a hydraulic cylinder Controlling functions on the positioner housing Useful in positioning parts in: welding cleaning assembly Increasing work efficiency up to 40% The use of unlimited rotation in 2 axes and, in addition, vertical and horizontal movement, allows any positioning of the attached workpiece (also "overhead"). The 3-axis positioner provides a significant improvement in work culture compared to traditional pan/tilt positioners (optimal positioning of the workpiece, easy operation). Advantages and benefits: For the employer: increased labor productivity by up to 40% through optimum positioning of workpieces - resulting in short amortization time of the device increased production efficiency does not require additional space on the shop floor better quality of welded joints - always possible to weld in the sub-lower position robust design of the device ensures long-term, trouble-free operation For the operator: ensuring ergonomic posture for the working person minimizing the risk of accidents - no changes in the fixing of objects no interruptions in work caused by waiting for the crane easy installation and operation It is possible to fully automate welding by using Kawasaki welding robots. We also offer positioners with a robot and integrated control system. Fsdpohtq Nzsfx Aa Aega ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE TO OPERATE THE POSITIONER PEDAL WITH CABLE FOR OPERATING THE TABLE ROTATION STEPLESS ADJUSTMENT OF THE SPEED OF TABLE ROTATION AND ARM ROTATION FUNCTION OF CONSTANT TABLE ROTATION LENGTH AND SHAPE OF THE ARM SIZE AND SHAPE OF THE TABLE ROTATIONAL MASS We can make the positioner according to the customer's individual guidelines.

Year of construction: 2023, condition: new, Welding positioner Positioner powered by three-phase current Rotation of table and arm by means of hydraulic swivels Controlling functions on the positioner housing Useful in positioning parts for: -welding -cleaning -assembly Increase productivity up to 40% Advantages and benefits: For the employer: -increase labor productivity by up to 40% through optimal positioning of workpieces - resulting in a short depreciation time for the machine -increased production efficiency does not require additional space on the shop floor -improved quality of welded joints - always possible to weld in a comfortable position Fgedpfx Aajhtq R Aj Aoa -solid construction of the device ensures long-term, trouble-free operation For the operator: -providing ergonomic posture for the working person -minimizing the risk of accidents -no changes in the fixing of objects -no interruptions in work caused by waiting for the crane easy installation and operation It is possible to fully automate welding by using Kawasaki welding robots. We also offer positioners with robot and integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE TO OPERATE THE POSITIONER PEDAL WITH CABLE FOR OPERATING THE TABLE ROTATION STEPLESS ADJUSTMENT OF THE SPEED OF TABLE ROTATION AND ARM ROTATION FUNCTION OF CONSTANT TABLE ROTATION SIZE AND SHAPE OF THE TABLE ROTATIONAL MASS We can make the positioner according to the customer's individual guidelines.

Condition: reconditioned (used), Year of construction: 2023, load capacity: 6,000 kg, total height: 1,021 mm, total length: 2,940 mm, total width: 1,900 mm, The PX series welding positioner allows for safe lifting, rotation and tilting to the optimal position of elements for welding or assembly. The tilting cylinders are protected by a metal body, which protects them from mechanical damage or possible splinters created during welding. Specification: - Model: BEAR PX6000 - Lifting capacity: 6 tons - Rotation, tilt and lifting Fedpfxowcff Rs Aa Aoga - Solid and reliable construction - Positioner powered by three-phase current - Table rotation using an electric turntable - Adjustment of the arm height and table tilt using hydraulic cylinders - Control of functions on the positioner housing Ideal for heavy welded elements