Used Welding Extraction for sale (9,477)

Condition: excellent (used), Field of application: • Single and multi-station extraction in industry and trade • Free-flowing and dry dusts, health-hazardous dusts, dry chips Special features: • Filter cleaning method: • Brush cleaning (manual) • Cleanable permanent filter cartridge (dust class M) • Special versions with various filter cartridges, exhaust ports, special voltages, custom paint finishes, pre-separators, and external control via volt-free contact are possible Your advantages at a glance • High suction power due to side channel blower technology • Low operating costs • Quiet operation suitable for multi-shift use • Patented tiltable filter housing for easy disposal of collected material | Price including packaging (wooden crate) | plus shipping costs Dwodpfx Aiew Avl Us Esd

Condition: excellent (used), Height 480 cm Width 120 cm Dsdpfxjw A Huae Ai Ejwd

Condition: new, In addition to pigments and additives, wet paints also contain other harmful substances that must be extracted without fail. AL‑KO COLOUR JET extraction units are the ideal solution here, offering four performance levels to ensure sufficient capacity at all times. The devices in the COLOUR JET series are optimally designed for the extraction of paint mist and solvents at wet painting workstations. The front guide plate ensures collection of emissions from below and at the side inlets, as solvents from paints settle and accumulate near the floor. At the same time, the guide plate ensures uniform air distribution across the filter and protects the filter medium from direct impact. Paint pigments are separated out via the large-area exchangeable filter, and the cleaned exhaust air is then routed outdoors via a pipe or hose. Dodpfx Aiewv T R Ue Eswd Applications: - Wet painting workstations in trade, industry, and workshops - Painting stations with ATEX Zone 2 Advantages: - Clean and safe painting workstations thanks to high extraction performance and an effective filtration system - Flexible use due to mobile design - Cost-effective and powerful, in many cases a substitute for a closed spray booth - Safety via certification for use in potentially explosive atmospheres (ATEX Zone 2) - Individually adaptable with a wide range of accessories

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding rotary table Protec KT 300 H, 170/400 special version Load horizontal 300 kg, tilted 150 kg Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Dsdpfovu Anzsx Ai Ejwd Welding current transmission 400 A Quick-change chuck diameter 300mm, surcharge €450.- Quick-change chuck diameter 400mm, surcharge €550.- Crank gear motor 0 - 90° stepless adjustment Speed stepless 0.01 to approx. 5 rpm. Incl. foot remote control Digital display with welding time limit (if required)

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 300 kg, Welding rotary table KT 600, with 100mm through hole Load horizontally 600 KG, tilted 300 KG Power consumption AC 380V, 50 Hz Rotary motor AC 400W Table diameter 650mm Height 700mm, width 800mm, length 800mm Weight 155 KG Infinitely variable electric tilt range 0 – 90° Speed 0.2 – 1.9 rpm Welding current transmission max. 500 A Incl. hand remote control and foot remote control Surcharge: Quick-release jaw chuck Dwsdovu Dpyopfx Ai Eod Diameter 500mm, €750 CE mark/approval

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. Dwjdpfx Ajvvcqxji Ejd for ventilation, room air filtration and extraction. extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points - Direct extraction for continuous operation - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Advantages: - Wide selection of standard extraction systems with numerous customer-specific customization and options - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases - Small footprint due to compact design Djdpowwtuisfx Ai Eswd - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Condition: used, continuous power (apparent): 50 kVA, short-circuit current: 31 A, input voltage: 380 V, overall weight: 420 kg, welding power (max.): 126 kVA, Dear Sir or Madam, Below we offer you a DALEX spot welding machine "PMS 10-4", used and in very good condition. Dwjdpfx Aijwtr Exo Eod Technical data and dimensions: errors excepted. Prices are quoted: plus VAT ex stock, loaded free truck. Delivery time: immediately available from stock, subject to prior sale. Payment: advance payment. For further details, see PDF.

Condition: excellent (used), functionality: fully functional, load capacity: 1,000 kg, 3-axis welding positioner with hydraulic height adjustment, load capacity 1000 kg, remote control. Clamping plate diameter 900 mm, excellent condition. Speed, height, and tilt infinitely adjustable. Height with vertical plate min. 635 mm, with horizontal plate min. 800 mm, height with vertical plate max. 1360 mm, with horizontal plate max. 1500 mm. Dwsdpfx Aijylihys Eod

Year of construction: 2012, condition: good (used), Medium-pressure conveying system for wood chips approx. 4 tons per hour Conveying line originally 180 m, 150 mm, partially available Air flow rate approx. 2,350 m³/h Motor power Three-phase motor according to IEC 55 kW Dedpeb Uyizofx Ai Eewd Degree of protection IP54 1 Housing made of high-quality gray cast iron, equipped with two axis-parallel and centrally arranged, dynamically balanced rotary pistons, with hardened and ground, helically toothed precision control gears, each mounted in roller bearings. Drive via V-belts, with the two pulleys and the associated high-performance narrow V-belts, as well as a protective cover. 1 Drive unit with motor mounting rails, shaft connection with easy-to-assemble taper-lock clamping sleeves, completely mounted on a common base frame. 1 Combined intake filter silencer (absorption silencer) 1 Resonance absorption pressure silencer, designed as a base frame 1 Base frame 1 Pressure valve 1 Check valve 1 Elastic connecting sleeve with clamps 1 Manometer 1 Set of vibration isolators with mounting screws 1 Electrical pressure monitoring consisting of a pressure transmitter and a display device, as well as an electrical output signal 1 Sound enclosure made of galvanized sheet steel with an oil collection tray and ceiling coating RAL 5001, segment design with internal lining and forced ventilation, fan wheel driven by the blower shaft. Sound enclosure for outdoor installation.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 4862 € 3000 x 1500 mm 3000 kg 755 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 3000 x 1500 x 200 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating Dwedpeyq Srlefx Ai Eod * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 200 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Dodpjyq Sr Eefx Ai Ejwd 3695 € 2400 x 1200 mm 3000 kg 482 kg 200 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 2400 x 1200 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, 3D grid table 2000 x 1000 x 200 mm, 100 mm pitch, plate thickness 22 mm, hole diameter 28 mm. Machined flat, very robust, weight approx. 750 kg. Supplied with table leg suitable for all standard accessories with 28 mm. Price is without accessories. Additional charge of €500 for a set with half the pictured quantity. Dwedpfovlli Ajx Ai Eod

Condition: good (used), functionality: fully functional, load capacity: 300 kg, Welding rotary table APS 300, fully functional with jaw chuck Speed continuously adjustable approx. 0.01 - 3.5 rpm. Dwsdpevnz Iyofx Ai Eed Swivel range approx. 180 ° Height horizontal approx. 1100 mm Height tilted approx. 900 mm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2860 € 1500 x 1000 mm 850 mm 8000 kg 541 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm Dsdewiripepfx Ai Eswd - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners OPTION (PRICE ON REQUEST): Diagonal holes

Condition: good (used), load capacity: 3,000 kg, Hywema 3-ton double-column rotating lifting device with 3rd axis multifunction including 2 universal joints There are 4 variants: - Mono single-column rotating lifting device - Duo double-column rotating lifting device with universal joint - Duo double-column rotating lifting device with crossbeam approx. 5m length for bolting (additional screw-adjustable height) - Duo double-column rotating lifting device with crossbeam for bolting and additional 3rd rotational axis with 3-ton load capacity Dedpjx Hpvzefx Ai Eswd Travel distance min. 700 mm (+/- 150 mm) Travel distance max. 2000 mm (+/- 150 mm) Total height 2800 mm Total length with 3rd axis 6300 mm Total width 1500 mm Total load capacity 3000 kg Optional foot switch and wired remote control available upon request Please click the video Machine has been repainted, technically flawless

Condition: excellent (used), load capacity: 5,000 kg, Self-supporting, braked rotating device for jig construction, tool making for assembly, welding, painting, etc. with foot-operated remote control, right/left switchable with warning light when working Djdpfxex Tib De Ai Ejwd with speed control on request (additional charge approx. €400) Machine is technically in mint condition, almost unused Weight 1200 kg Dimensions: Height to axle center 1000 mm Mounting plate 400 x 400 mm Hole spacing approx. 240 x 240 mm External dimensions of box section 1000 mm x 850 mm More machines of this type in various sizes are in stock. Load capacity up to 5000 kg New machine price over €20,000

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, Equipment: foot remote control, rotational speed infinitely variable, 3000 kg load capacity welding positioner, complete set Horizontal load capacity: 3000 kg, tilted load capacity: 3000 kg Dwsdpow T S Husfx Ai Esd 2 gears for tilt adjustment Motor protected by two steel swing doors Very robust design Speed steplessly adjustable from 0.05 to 0.7 rpm (optionally up to 1.5 rpm) Turntable diameter: 1400 mm Tilt up to 120° Height horizontal: 1300 mm, tilted to center: 1050 mm Dimensions: Length 2.0 m x Width 1.4 m Handheld remote control with digital display and dual foot pedal

Condition: excellent (used), Year of construction: 2018, arm reach: 1,300 mm, Reach: 1300 mm Load capacity: 12.5 kg Weight: 33.5 kg Type: MSIP-REM-URK-UR10 Djdpfew N N Dcex Ai Eswd Year of manufacture: 2018 Serial number: S300711 Lorch S5 RoboMIG XT cobot welding system 400-A welding system.

Condition: new, Year of construction: 2025, load capacity: 1,000 kg, Various very heavy-duty welding tables, machined, partially plasma nitrided Sizes: - 1 x 1 meter, €1,500 - 1.2 x 1.2 meters, €1,700 - 1.5 x 1.5 meters, €1,900 - 2 x 1 meter, €2,300; plasma nitrided €3,300 Dedpfxowu Exzs Ai Eswd - 2.4 x 1.2 meters, €2,900; plasma nitrided €3,900

Condition: like new (used), controler for resistance weldingmachines Dalex and others T 8036 T 8036 S3 MPS 8043/1 MPS 8043 IQ available from stock Dwjdeyrx Ngepfx Ai Eed

Condition: like new (used), Year of construction: 2019, functionality: fully functional, load capacity: 4,000 kg, Equipment: documentation/manual, Sideros Syncrolift Column Lifting and Rotating Device, 4000 kg load capacity, like new condition. Minimum height: 450 mm Maximum height: 1950 mm Travel: 1500 mm Diameter of clamping disc: 800 mm Overall height: 2505 mm Total weight: 1300 kg Dwedpfx Aisyrz Hno Esd Torque: 5500 N/m Speed: 0.75 RPM.

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 750 - Infinitely adjustable in height - Includes hand-held remote control - Rotation speed 0.07 - 1.3 RPM - Hydraulic tilt up to 135° - Max. welding current 400 A - Table diameter 700 mm - Height 780 - 1,550 mm Dedpfx Aieyupd Ho Eewd - Dimensions 1,640 x 810 mm - Connection 3 x 400 V / CEE 16A - Weight 650 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, load capacity: 2,000 kg, SEVERT Double-Column Positioner S 40.1-1HH, 2 complete sets available with full documentation For welding or assembly applications Can also be used as a single column elevation and rotation unit (mono configuration) Total load capacity: 2000 daN Load capacity per column: 1000 daN Torque of clamping plate 1: 1400 Nm Clamping plate 2: free rotation without drive Clamping plate rotational speed: 2.0 min⁻¹ Clamping plate 1 dimensions: W1070 x H720 x D30 mm, Part No. 20452-001 Clamping plate 2 dimensions: W1070 x H720 x D30 mm, Part No. 20453-001 Vertical stroke: 680 mm Lifting speed: 2200 mm/min Welding current return: 400 A Dimensions (B2): Column 1 with base: Length: 970 mm Width: 885 mm Height: 2350 mm Net weight: 1200 kg Column 2 with carriage: Length: 970 mm Djdpfx Ajyupkyoi Eowd Width: 1030 mm Height: 2350 mm Net weight: 1600 kg Excellent condition, complete documentation included We have multiple column elevation/rotator units in stock with load capacities from 1 ton up to 15 tons 2 complete sets (units) available

Condition: like new (used), functionality: fully functional, load capacity: 2,000 kg, Demmeler Robotix L Manipulator 3-Axis 360° rotation, 360° tilting (overhead), with height adjustment (virtually silent) Excellent condition (like new) Minimum height: approx. 486 mm (tilting axis 0° horizontal) Maximum height: approx. 1438 mm (tilting axis 0° horizontal) Minimum height: approx. 525 mm (tilting axis vertical) Maximum height: approx. 1477 mm (tilting axis vertical) Lower arm length 1500 mm (radius) Upper arm length 1900 mm (radius) Connection: 16 A plug Overall height 3250 mm Rotational speed approx. 0.2 - 2.0 rpm Torque 24000 Nm Lifting speed 1.5 m/min Dwodpfx Aeyupl Doi Ejd Handheld remote control