Welding table

Protec APS KT 300

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol Iedpfexgnz Tex Ahyotb - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: ready for operation (used), Year of construction: 2001, operating hours: 19,853 h, functionality: fully functional, machine/vehicle number: 11170000963, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis simultaneous Speed 18000 Tool changer 60 pieces / SK 40 DIN69871 Tools included in the price ICS / air blast Itsdowqp Hujpfx Ahyob Heidenhain 426/430

Condition: new, pressing force: 10 t, - Capacity 10 tons Itedogwxm Hjpfx Ahysb - Cylinder stroke 600 mm - Pressure indicator - Emergency stop - 400V

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 3,600 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 9,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 vertical machining centre was manufactured in 2005. It features a Heidenhain iTNC 530 control, a main spindle speed range of 20 - 10,000 RPM, and a rotary table with a clamping surface of 630 x 500 mm. The machine has undergone significant overhauls, including a complete X-Axis bearing replacement and new coolant pump installation. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 machine we have for sale. Contact us for more information. Additional equipment • Tool Positions: 16 / Max. Tool Weight: 6 kg / Max. Tool Length: 300 mm • Max. Tool Diameter: Without adjacent tools: 130 mm / With adjacent tools: 80 mm • Total Power Requirement: 17 kVA • No chip conveyor included / No automatic measuring probe included / No tools included Machine Benefits Qualitative Machine Benefits • Low spindle hours and power-on hours. • Never used in series production; operated with care and proper procedures. • Warm-up programs and maintenance routines followed for optimal performance. Technical Machine Benefits • Torque: 57 / 82 nm / rapid traverse (x/y/z): 12 m/min /feed rate: 10000 mm/min • Table clamping surface: 630 x 500 mm • Swivel range: -5 / +110° • Max. Table load: 200 kg • T-slots: 14 h7 / t-slot spacing: 63 mm • C-axis rotation: +/- 360° • Complete x-axis bearing overhaul including ball screw and bearing assembly. / various hydraulic components overhauled. / tool changer readjusted and sensor system replaced. • New door switch installed. / new discs installed (with some chip debris affecting them). / new coolant pump installed. / new screen installed. / new handwheel hr410 installed. Itodpfxox E D U Ao Ahyeb • Machine is 5-axis machine with 3+2 configuration Technical Specification Taper Size SK 40

Condition: new, functionality: fully functional, load capacity: 300 kg, Equipment: foot remote control, Welding positioner Protec KT 300 H, 170/400 special version with hydraulic height adjustment and safety lock against lowering. Hydraulic platform load capacity 500 kg. Horizontal load 300 kg, tilted load 150 kg. Power supply 220 V, 50 Hz. Table diameter 450 mm, hollow shaft diameter 170 mm, table height 500 mm. Welding current transmission 400 A. Quick-acting chuck diameter 300 mm, surcharge €550. Quick-acting chuck diameter 400 mm, surcharge €750. Mobile hydraulic height adjustment, surcharge €650 (with lockable castors). Counter-support yellow, stepless height adjustment €250. Crank drive motor, 0-90° stepless adjustment. Speed stepless from 0.01 up to approx. 5 rpm. Incl. foot remote control. Digital display with welding time limitation available on request. Isdpfjwz Rfgox Ahyotb

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 1000 mm Itedpfsxx A Ncox Ahyjb surface area 1.035 x 3.500 mm control Heidenhain 530i round table Ø500 mm / 360° mm/° NC swivel head +/-90 ° spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 48 Pos. auto power on hours ca. 27.834 h spindle hours ca. 12.357 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel head - Rotary table - Wireless probe - Direct linear encoder - Internal coolant supply 40 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2010, functionality: unexamined, Offered is an emulsion coolant system with a belt filter. Itedpev N U Ezofx Ahyob Year of manufacture: 2010, flow rate: 500 l/min, power consumption: 21.2 kW. Further specifications can be found on the nameplate.

Condition: ready for operation (used), Year of construction: 2015, number of axes: 5, This 5-axis Mazak VTC 800/30SR was manufactured in 2015, featuring a 600mm rotary table (Nikken CNC601MA), 70 bar high-pressure cooling, and a 48-tool magazine. It includes Renishaw probe preparation, RMP60Q touch probe, and CAD/CAM software TOPSOLID 7.18 with a floating license. Consider the opportunity to buy this Mazak VTC 800/30SR vertical machining centre. Contact us for more information about this machine. Itedpfx Aox Imq Sehyob • 70 bar high-pressure cooling • 48-tool magazine • Center partition Additional equipment • 600 mm rotary table (Nikken CNC601MA) • Renishaw probe preparation • RMP60Q touch probe • CAD/CAM software with floating license TOPSOLID 7.18 • Post-processor for the specified machine

Condition: ready for operation (used), Year of construction: 2009, Control Unit Itsdpfx Ahex D Rggsysb Brand HEIDENHAIN Model iTNC 530 This 5-axis Matec 30-HV was manufactured in 2009, featuring a versatile universal machining center with a large X-axis travel of 3000 mm and a Y-axis of 600 mm. It includes a high-speed range up to 12,000 rpm, a tool magazine for 36 tools, and a high-pressure cooling system (70 bar). Ideal for complex 3D machining with its powered CNC rotary table and Heidenhain iTNC 530 control. Contact us for more information about this machine. Application Types Milling