Used Welding Fixture for sale (5,792)

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. Hfsdpoh N Sd Uofx An Njn The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: refurbished (used), controler for resistance weldingmachines MPS 1033 MPS 1036 MPS 15033 MPS 15036 MPS 15043 T 1036 Hfodpfx Ansyrx Dwo Non T 5036

Condition: new, controler for resistance weldingmachines Dalex MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1 --- MPS 200mono MPS 200monoR1 Hfodpfx Aeyrx Ntsn Non MPS 200multi MPS 200multiR1 --- MPS 300multiR1 available from stock

Condition: like new (used), Year of construction: 2020, Welding positioner table for sale Sale only within EU member states! No private sales. Hfedpfx Aoz Rxz Rjn Nen MAE can be inspected upon request. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: good (used), Siegmund System Perforated Table including Silverline Profile Processing Station Hfsdpfxsztawgj An Nsn For sale is an extremely robust, combined industrial workstation for metalworking, jig and fixture construction, or precise profile manufacturing. The system consists of top-quality components: 1. Siegmund System Perforated Table (base) - High-precision, extremely warp-resistant, and solid welding and clamping table from the world market leader, Siegmund. - The perforated system (including perforation on the side panels) allows for flexible and repeatable positioning of stops, clamping bolts, and angles. 2. Silverline Clamping & Processing System (assembly) - Solid upper structure with precise linear guides for longitudinal movement. - Two parallel-arranged, yellow motor heads (milling/drilling units) for simultaneous or staggered processing steps. - Three heavy-duty, horizontal clamping bars securely fix workpieces from the rear against the stops, ensuring material protection. 3. Pneumatic Comfort Control - Ergonomic control panel on the front with a 5-way numbered lever control. - Selective control of individual pneumatic cylinders. - Integrated analog pressure gauge and safety emergency stop switch. - Powerful, central electric motor for the mechanics/hydraulics. Dimensions: Tabletop: 2000 x 1000 x 200 mm Table height: approx. 900 mm, height adjustable Overall dimensions: 2420 x 1400 x 1580 mm This offer is for one Siegmund System Perforated Table. "Everything from a single source: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Hfjdszd Rmgspfx An Nen Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, IPG Type: Laser welding pliers LSS-5M-3500-3F Ytterbium fiber laser The laser welding pliers LSS5 M complements the series as a compact welding tool. With laser power ranging from one to four kilowatts, integrated cooling technology, and a user-friendly control unit, this combined welding and clamping tool is an ideal tool for welding high-strength steels, galvanized sheet metal pairings, or aluminum. Trifocal technology 3500W laser pliers Controller 3F Operating mode CW/Modulated Wavelength 1070 nm Laser power main beam 3.0 kW Laser power secondary beams 2 × 0.25 kW Spot size (depending on fiber and optics), µm 250 – 600 Power requirement 3500 W laser power Laser duty cycle 30% (with cooler) 3.5 kW Dimensions, controller W × D × H, mm 608 × 808 × 1335 Weight 250 kg Lss-5M-3500-3F 400-460V AC 3P/PE 50/60 Hz 32A/120k Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information provided!) We will gladly answer any further questions you may have over the phone. Hfedpfx Aszd Rinen Njn

Condition: new, number 33 Positionen weight 52 kg condition neu 28 mm Set 1: 33 pieces, 28mm system, consisting of: Clamps: 4 x 280610.N Hfjdpfsfh N Ekex An Non Clamps: 2 x 280630.N Prism: 2 x 280648.1.N Bolt: 12 x 160511 Stop: 4 x 280410.N Stop: 4 x 280420.N Angle: 2 x 160110.N Angle: 2 x 280152.N Accessory set. 1 x 283999 Price plus packaging and transport.

Condition: new, table diameter 1000 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,1 - 1,25 U/min max. torque on the faceplate 900 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,37 + 0,75 kW weight of the machine ca. t Hfjdsfv Aw Espfx An Njn ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1400 mm table load 3,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm Hedpjfv Axbsfx An Nsfn table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 800 mm table load 600 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 2,0 U/min height adjustment 850 - 1300 mm max. torque on the faceplate 900 Nm engine output 0,37 / 0,37 kW welding current 500 Ampere Hsdofv Aynopfx An Njfn - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, table diameter 1100 mm table load 2000 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min height adjustment 1100 - 1550 mm max. torque on the faceplate 4000 Nm engine output 1,1 / 0,75 kW welding current 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Hfodpfefv Ayvox An Nsn Welding power transmission for max.500Ampere.

Condition: new, table diameter 2000 mm table load 10000 Kg swivelling range 0 - 130 Grad turning speeds 0,02 - 0,2 U/min Hodpofv Ay Iofx An Nefn height adjustment 1450 - 2200 mm max. torque on the faceplate 20000 Nm engine output 1,5 / 2,0 kW welding current 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Condition: new, table diameter 1400 mm table load 5 t swivelling range 0 - 135 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1100 bis 1950 mm max. torque on the faceplate 7000 Nm welding current 700 Ampere Hjdsfv Azdjpfx An Njfn including remote control and welding current transmission.

Condition: new, table diameter 300 mm table load 50 Kg Hfjdpfx Anjfv Aztj Nen swivelling range 90 Grad turning speeds 1 - 12 stufenlos U/min table load capacity 50 kg vertikal total power requirement 0,22 kW weight of the machine ca. 0,036 t dimensions of the machine ca. 0,45 x 0,43 x 0,38 m

Condition: new, table length 400 mm table width 400 mm table load 0,2 t table diameter 400 mm swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 100 kg. vertikal total power requirement 220 kW weight of the machine ca. 0,065 t Hedpfx Ansfv Azzs Njfn dimensions of the machine ca. 0,56 x 0,42 x 0,46 m

Condition: new, table length 2000 mm table width 1000 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,38 t dimensions 2,0 x 1,0 x 0,9 m Hfjdpogarhkofx An Non Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, number 55 Positionen Hfedpfx Ajgarhysn Njn 16 mm condition neu weight 23 kg Set 2 55 pieces, 16mm system, consisting of: Clamps: 6 x 160610 Clamps: 2 x 160630 Prism: 4 x 160645.1.N Bolt: 18 x 160511 Stop: 4 x 160410.N Stop: 6 x 160420.N Angle: 6 x 160108.N Angle: 6 x 160110.N Angle: 2 x 160162.N Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,18 t dimensions 1,2 x 0,8 x 0,85 m Special offer !!! Siegmund Workstation incl. 2 drawers + tool set B Through hardened tool steel, bore Ø 16 mm Hfjdsgazm Ijpfx An Nen Holes surface 50x50 mm grid, material thickness approx. 11.5 - 13 mm. Consisting of: 1x 004002 (Siegmund Workstation) 1x 164004.X07 (perforated plate) 1x 164030 (clamp holder) 1x 004020 (shelf) 1x 164035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) 4x 160620 (clamp) 8x 160511 (double quick release bolts without groove) 6x 160412 (stop) 2x 160108.N (angle) 1x 160852 (Allen key) 1x 164301 (vice)

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,35 t dimensions 1,2 x 0,8 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top Hsdpfxsfqncpj An Njfn parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: good (used), Year of construction: 2004, EMA high-frequency welding machine with cooling water unit EMA high-frequency welding machine MFA with Thermotec PT2000 water cooling system Welding machine range: 0 - 1000 °C MF output: 80A MF generator frequency: 10 kHz Mains connection: 380V 106 A Foot pedal Water cooling, cooling water unit Thermotec PT2000 Dimensions approx. L1500 x W730 x H1900 mm Hfjded Tv H Dspfx An Njn Volume: 1730 liters Year of manufacture: 2004 The collection basin is not included in the scope of delivery. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, Magnetization Device, Magnet Physics MF-RI8 251970 Item condition: New, without original packaging The goods originate from the liquidation of a company in the automotive industry and were temporarily stored in carousels. Possible signs of storage. Hodpfx Aneivdl Tj Njfn R12B1_EK You can find more magnetization devices – both new and used – in our shop! International shipping costs available upon request!

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Hfjdpfomhm Axox An Non Welding table "SIEGMUND Professional Extreme 850 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 850 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top, parallel hole arrangement in 50 mm grid on the sides. Including basic equipment. Accessories shown are optional. Price plus packaging and transport.

Condition: new, table diameter 450 mm table load 300 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 300 kg vertikal total power requirement 220 kW weight of the machine ca. 0,078 t dimensions of the machine ca. 0,66 x 0,45 x 0,48 m Hedsupxa Sspfx An Nofn

Condition: new, number 43 Positionen weight 40 kg condition neu 0 Hfjdpfxjupxbvj An Nsn Basic set 3 / 43 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 12 pcs. quick clamping bolts 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 stop and clamping angles 175mm 2 stop and clamping angles 275mm 2 pcs. prisms 60mm 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis