Used Welding Inverter for sale (7,134)

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere Fsdpfx Aofv Ayksm Espp connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, table diameter 1300 mm Fjdpfx Amjfv Ayye Eopp table load 3000 Kg swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min height adjustment 1200 - 1800 mm max. torque on the faceplate 6000 Nm engine output 1,1 / 1,1 kW welding current 700 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Condition: new, Year of construction: 2020, 3000 kg load capacity, welding rotary table, Fsdpsfv Huusfx Am Eepp very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display and foot-operated remote control

Condition: as good as new (ex-display), Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW Fpsdpfxofxpggj Am Eep

Year of construction: 2022, condition: new, 3000 kg load capacity, welding rotary table, very robust Fpsdpfxefxphls Am Eep Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display and foot-operated remote control

Condition: new, volume capacity 2500 m3/h 0 3000 mm total power requirement 1,1 kW weight of the machine ca. 0,08 t dimensions of the machine ca. 0,58x0,58x0,58 m Fsdpfx Aefrzt Uem Espp

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Fpsdpfxsftd T Ss Am Eep Accessories shown are optional. Price plus packaging and transport.

Year of construction: 2020, condition: as good as new (ex-display), Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Fodpfxsf Ezc As Am Ejpp Handheld remote control with digital display Dual-foot remote control Height: approx. min. 700 mm horizontally, max. 1400 mm Diameter of turntable: 1400 mm Tilting angle: min. 135° Speed: 0.05 to 0.6 RPM Motor power: 3 kW

Condition: new, Year of construction: 2025, 1000 kg load capacity, height-adjustable welding positioner with through-hole, 200 mm Plate diameter: 900 mm Horizontal height: min. 0.8 m, max. 1.6 m Tilted height: min. 0.6 m, max. 1.4 m Speed: 0.1 - 1.2 RPM Length: 2000 mm Width: 1000 mm Fedof Ezdcopfx Am Espp Tilt angle: up to 135° Handheld and dual-foot remote control with speed display Very robust

Condition: excellent (used), Welding positioner, Focker Strähler, 8 tons Fsdpfx Amef Ezdns Eopp 8000 kg load capacity with hand and foot remote control Speed and inclination continuously adjustable 0.02 rpm to 1.1 rpm Diameter 1500 mm Height to center when tilted 1170 mm Height in horizontal position 1400 mm Length 2400 mm Width 1500 mm Condition: visually and technically flawless, runs very quietly.

Condition: good (used), Extremely practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Maximum load: 100 kg horizontally. Maximum load: 50 kg vertically. Rotation speed: 0.5-9 rpm. Rotation direction: left and right. Rotary table speed: manually adjustable. Rotary table diameter: 345 mm. Rotary table height: 415 mm. Fjdpfx Aocctnaom Eopp Rotary table tilt angle: 0-90°. Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Power supply: AC 110V / 220V 50/60Hz. Optional with jaws, additional cost: 160. Delivery to your doorstep: 80.

Condition: new, table length 1000 mm table width 1000 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,3 t dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Fpjdpjgazl Usfx Am Eep Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,1 t dimensions 3,0 x 1,5 x 0,9 m Fodegazmkjpfx Am Espp Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, table length 1200 mm table width 800 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,19 t Fpjdpfx Asga Nh Hsm Ejp dimensions 1,2 x 0,8 x 0,85 m Siegmund workstation including 2 drawers Premium Light, through hardened tool steel X8.7, plasma nitrided and BAR coated. Drilling Ø 28 mm, drilling surface 100x100 mm grid. Material thickness approx. 15 mm With the new workstation from Siegmund, you can create your ideal workplace in a modular system. The Siegmund Workstation can be individually adapted and expanded to meet your needs and wishes. Whether sawing, drilling or welding - the absolute all-rounder in every workshop! Consisting of: 1x 004002 (Siegmund Workstation) 1x 804004.X7 (perforated plate) 1x 284030 (clamp holder) 1x 004020 (shelf) 1x 284035 (bolt and prism holder) 1x 004025 (tool wall including shelf) 2x 004210 (drawer) Spacer ring 800653.N is required for clamping with bolts 280510/280511.

Condition: used, Bosch Diffusion Welding Machine The system described here was designed for the following application: Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft-soldering unit, copper band welding unit), consisting of a main machine and control system, "PLC control, touchscreen operation". Process Description The workpiece carrier moves into the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. The loading gripper takes over the armature and inserts it into the welding fixture. The welding fixture moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process begins. This process is repeated until the armature is completely welded. The welding fixture moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with I0 armatures continue on the belt system; I0 armatures are conveyed to the removal belt. Technical Data: Manufacturer: Gatek Designation: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse: 35 A Fpedpfxeg Icfpe Am Eep Water: Inlet 4 bar, 15-23 °C approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of manufacture: 2016 You can find more new and used items in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, 600 kg load capacity Fjdpfx Amsg Tdpgo Espp Welding rotary table, height-adjustable with through-hole, 100 mm Plate diameter 700 mm Height in horizontal position, min. 0.65 m, max. 1.25 m Height in tilted position, min. 0.45 m, max. 0.95 m Speed range from 0.01 - 1.3 RPM Tilting angle up to 135° Hand and foot remote control with speed indicator very robust

Year of construction: 1996, condition: excellent (used), Welding rotary table Hamacher 500 KK, load capacity Fedohadtuopfx Am Eepp Speed continuously adjustable from 0.01 to approximately 2.0 RPM Height (horizontal) 800 mm, width 800 mm, length 1550 mm Diameter of the clamping disc 800 mm

Condition: as good as new (ex-display), Very practical, heavy-duty table, good quality. Welding rotary table, 100 kg load capacity. Max. load: 100 kg horizontally. Max. load: 50 kg vertically. Rotation speed: 1 to approx. 7 RPM. Rotation direction: left and right. Table speed: manually adjustable. Table diameter: 345 mm. Fpedpe Ugnbofx Am Eep Table height: 415 mm. Table tilt angle: 0-90°. Motor power during operation: 0.12 kW. Dimensions: 500 x 470 x 415 mm. Power: AC 110V / 220V 50/60Hz. Optional: with chuck/quick-release chuck, surcharge of 180 €. Delivery to your door: 90 €.

Year of construction: 2022, condition: new, 3000 kg welding rotator, hydraulically adjustable in height Speed: 0.05 to 0.8 revolutions per minute Very robust, complete set with hand-held and dual-foot remote control Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approximately 700 mm Height adjustment with the disc in a vertical position to the center: Fjdpfoff Ngijx Am Eopp 960 mm to 1910 mm Dimensions with the disc in a horizontal position: 1200 mm to 1900 mm We offer the rotary tables with capacities of 600 kg, 1000 kg, 3000 kg, and 5000 kg.

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine, Type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and tested. Rated voltage: 400V Rated power: 60 kVA at 50% duty cycle Short-circuit current: 22 kA Fjdpfxjh N Sd Uo Am Espp Welding current: 17.6 kA Fuse rating: 125A Outreach: 420mm Electrode force: 470 daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode cone: MK2 Lower console, height-adjustable by approximately 300mm Welding control unit TE 180 with digital display of welding current, current rise, etc. Main switch on the control cabinet - new 2-stage foot switch according to UVV regulations - all pneumatic and water hoses replaced - electrode holder new - original documentation / operating manual available - machine inspection with confirmation valid until 09/2026 - weight approximately 330kg Demonstration and inspection by appointment only. Commissioning and training at the customer's site possible for an additional charge. The machine is located in Dresden, near the A17 motorway. And we also have a suitable cooling unit in stock – of course, for an additional charge ;-)

Condition: new, functionality: fully functional, Welding tractor, ABICAR 1200 PRO 42V, new unit from stock, original packaging Mobile unit for welding longitudinal seams with maximum efficiency. Production of continuous butt and fillet welds – by using these welding systems, longitudinal seams can be produced faster and costs for rework can be significantly reduced. In combination with accessories, the following applications are possible: • Welding with oscillation, • Use of welding torch with larger diameter, • Operation of the unit on outer edges, overlap joints, plates, pipes, tanks, etc. Operation: in combination with welding power source iMIG POWER 400 (available in stock) * Torch type: MIG/MAG * Torch diameter: 16 – 22 mm * Voltage: 1 … 42 V, 50/60Hz * Power: 25 W * Workpiece thickness min: 5 mm, ground clearance 5 mm * Speed horizontal / vertical: 0 – 120 cm / min, 0 – 110 cm / min * Curvature radius min: 1,500 mm * Dimensions (L x W x H): 401 x 372 x 236 mm * Weight: 14 kg (welding tractor) Fodpfx Ame Afd Nbs Ejpp * Manufacturer: ABICOR BINZEL, Germany * Several units available Delivery/shipping possible against cost coverage. Image of the product is similar.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,760 mm, total width: 2,450 mm, total length: 3,600 mm, overall weight: 3,200 kg, input voltage: 400 V, input current: 40 A, warranty duration: 12 months, Equipment: documentation/manual, This offer features a robotic welding cell, which includes a Panasonic TM-1800 welding robot with a WG4 controller, along with two workstations equipped with single-axis welding positioners. The workstations, measuring 1200x800 mm, are positioned opposite the robot, with the fixtures located 800 mm above the floor. The entire cell is mounted on a common structural base, allowing it to be easily relocated anywhere within the production facility using a forklift. Safety is managed by a system incorporating limit switches installed on a sliding partition and service access doors. If a limit switch is triggered on the side where the robot is currently operating, both the robot and the positioner will come to an immediate stop. Fpsdpfo Agng Dex Am Esp A fume extraction hood with ductwork will be installed above the cell to capture welding fumes generated during the robot's operation. A filtration unit, featuring an automatic filter-cartridge cleaning system, will be positioned next to the cell. The cell is equipped with a Panasonic TAWERS welding system, which integrates a 350A MIG/MAG inverter power source directly with the robot controller. The robot is outfitted with a wire feeder, a welding cable package, a gas-cooled welding torch, and an anti-collision sensor.

Condition: new, table length 1500 mm table width 1500 mm Fpjdpfsmhm Ausx Am Esp table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: used, Manufacturer: SIEMENS Type: 6SE7031-3FG20-Z Fodpfx Asu D Eknem Eepp Description: SIMOVERT MASTERDRIVES SIMOVERT VC, CONVERTER CHASSIS UNIT, IP00 3 x 500-575V AC, 50/60HZ, 128A NOM. POWER RATING: 90 KW Item condition: used, untested

Condition: new, table diameter 350 mm table load 100 Kg swivelling range 90 Grad turning speeds 0,2 - 2 stufenlos U/min table load capacity 50 kg. vertikal total power requirement 220 kW Fpsdpfx Amsupw Nxj Ejp weight of the machine ca. 0,055 t dimensions of the machine ca. 0,46 x 0,4 x 0,42 m