Used Laser Welding for sale (7,497)

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Iasdpfsn Sl D Rjx Ab Top

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: Iaodpfx Ajh Ad E Uob Tjp 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 24 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, laser wavelength: 1,080 nm, Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine AIRTECH 3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: the Airtech handheld laser welding system with 3,000 watts of power! Ideally suited for demanding sheet metal fabrication – efficient, safe, and highly flexible in use. Highlights and Features: - Power: 3,000 watts for top welding quality and speed - Laser wavelength: 1080 nm, continuous operation with modulation frequency up to 20 kHz - Handheld laser welding head – optimally positioned for comfortable operation - Robust housing, intelligent internal layout for maximum service life - Touchscreen display for easy operation Iasdpfx Abewzv D Ij Top - Optional automatic multifunction wire feeder - Safety features: three-color alarm, safety interlocks, misuse protection mechanism - Cooling via separate water circuit with 13-liter tank capacity - CE-certified components according to European standards Your Advantages - Safe operation thanks to extensive protection mechanisms and alarm systems - Flexible applications including automatic wire feeding and robotic integration - Low operating costs and easy maintenance through well-designed technology and durable components For more information or a consultation, the Airtech team is happy to assist you!

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Isdpfjxfrv Esx Ab Tsap Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: new, Year of construction: 2025, functionality: fully functional, IMPACT 4in1 from stock Europe MANUAL FIBER LASER 4 IN 1 MACHINE WITH DOUBLE WIRE FEEDING SYSTEM WELDING – CLEANING – CUTTING – WELD CLEAN the IMPACT FL 3000 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it possible that you can use it for Cleaning , cutting and welding. The device ensures a lower cost of use: the energy consumption is about 10-20% of the usual welding processes, and the welding speed is 3-10 times faster than traditional arc and argon welding or plasma welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A welding machine with extra functions as cleaning and cutting from 1,5 Kw together cut at least 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders so that welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Iaedjvca Nrepfx Ab Tjp we deliver in complete Europe, we have in Europe in 3 locations a sales and service organization.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Iaodpfx Absv Ipcfo Tsp Pipe length: 100 - 1250 mm

Condition: excellent (used), Year of construction: 2019, The system consists of two identical laser welding units. The system was previously used to manufacture Li-ion batteries (E-Smart). In this process, cell connectors for series connection in battery modules were welded. The cycle time for battery modules in this production was 3-4 minutes. Basic data: Iodpfxsv Iq Tlj Ab Tsap Year of manufacture: 2019 Weight: 6021 kg Nominal current: 20 A Connected load: 12 kVA Disc laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and calibration: PRIMES FocusParameterMonitor (FPM) Control cabinet cooling: RITTAL SK 3185830 1x laser source supplying both systems: Trumpf TruDisk 5001, Laser power: 5 kW Wavelength: 1030 nm Beam quality: < 100 µm

Year of construction: 2021, condition: ready for operation (used), A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment. Isdpfjyugl Usx Ab Teap

Condition: new, Year of construction: 2024, Handheld laser welder LWH-3000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm Iaodpfxeup Uzxe Ab Tsp - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-1500-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1500 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W Iaedpfxjthigro Ab Tjp - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Ijdpfx Aethit Eob Tsap Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Manual laser welder 3000 W There are two features that characterize Otinus laser welders - perfectly repeatable welds and ease of use. The kit includes: laser welder with a built-in cooling system welding gun features with a focal length adjustment and a set of accessories MAX Photonics fiber laser source automatic wire feeder lead and hose kit nozzle and lens starter kit Specifications laser power output 1500 W laser wavelength 1064 nm welding speed: up to 120 mm/s feed voltage 230 V 50 Hz dimensions (including the laser head rack) 630x1300x1500 mm Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Fiber optics connecting the welding gun with the laser source allows the operator to work freely at multiple workstations. Small heat affected zone prevents from severe distortions. The weld is applied in a short time achieving proper and strong joint between materials. Intended use The laser welder is designed for professional use in workshops and plants where high welding quality and aesthetics are required. Laser source output power: 1000 W Carbon steel: up to 3 mm Stainless steel: up to 3 mm Aluminum: 2 mm Brass: 0,8 – 1 mm Laser source output power: 1500 W Carbon steel: up to 4 mm Stainless steel: up to 4 mm Aluminum: 3 mm Brass: 1 mm Laser source output power: 2000 W Carbon steel: up to 5 mm Stainless steel: up to 5 mm Aluminum: 4 mm Brass: 2 mm Laser source output power: 3000 W Carbon steel: up to 8 mm Stainless steel: up to 8 mm Aluminum: 7 mm Principle of operation The laser welder melts down the welding wire together with material edges by means of a laser beam. After switching on and setting up the unit, the welding gun is positioned at the beginning of the future weld line. Then, by pressing the trigger of the welding gun, the beam is generated at the fiber laser source located inside the housing. The beam propagates along the optical fiber to the laser head. The beam is focused and emitted toward the welding wire, which is fed by a wire feeder and toward a location where the gun has been placed. After the trigger is pulled, the head should be pulled along the weld line according to the wire feed rate. Iodpfxsrumymo Ab Tsap The cooling system maintains a constant temperature for the gun and the laser source by means of a water recirculation system. Radiation level and cooling are managed using a controller that adjusts the parameter values according to the user’s parameter settings.

Condition: new, Year of construction: 2024, Handheld laser welder LWH-2000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm Iajdpfxoh H Ngtj Ab Tjp - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: new, Year of construction: 2024, Handheld laser welder LWH-1000-N Gefasst SUP 20S The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Gefasst SUP 20S laser head - Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm Iasdpfehufigex Ab Tep 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Isdpfoxrpmzex Ab Tjap Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: new, Year of construction: 2026, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Iajdpfeizr Rlex Ab Tsp Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: new, Year of construction: 2026, Introducing the latest model of the CORMAK WL3000 industrial laser welder, which combines advanced FIBER technology with innovative design solutions, offering unparalleled precision and efficiency. This device is designed for welding various types of metals, which ensures the quality and repeatability of welds at the highest level. Thanks to the 3-in-1 function enabling welding, cutting and laser cleaning, the device is versatile and effective in many industries. Why choose CORMAK WL3000? The CORMAK WL2000 laser welding machine is the perfect solution for professionals looking for reliability, precision and efficiency. Its innovative design and advanced cooling system make it a future-proof device that can handle even the most demanding welding tasks. Pre-order now and take advantage of this unique offer! Key Features and Benefits Advanced cooling system : A new, more efficient water cooling system ensures optimal operating temperatures, allowing you to work longer without interruption and increasing the lifespan of your device. Innovative design : The ergonomic and lightweight design of the welding head allows for welding even in hard-to-reach places. Thanks to the adjustable spot size (0-5 mm) and replaceable nozzles, the operator has full control over the welding process. Easy to use - thanks to the solutions used and the well-thought-out design, the operator can start working after a short training Low indirect radiation, just wear protective glasses to filter strong light when working Much faster welding than traditional methods, productivity can increase by 3 to 10 times Concentrated beam: slight change in structure due to small heat-affected area, Repeatability of welds, the weld seam is nice, the welds are of high strength. Very thin materials such as 0.5 mm stainless steel can be welded. Welding option with or without wire. The integrated laser cleaning function increases the range of applications of the device. Possibility of using the cutting option - ensures excellent cutting quality, without mechanical processing. Technical parameters Maximum power 3000 W Laser wavelength 1070nm Isdpfx Abekkbw Uo Teap Fiber optic length 10m Working modes Continuous / Modulated Air pressure 10 - 15 L/min Welding speed 0-215mm/s Automatic wire feeder Ø 0.8 - 2.0 mm Maximum power consumption ≤11.0kW Focal length 150mm Cooling system water Operating voltage 400V Shielding gas consumption 20L/min Dimensions 600x1100x1100mm Weight approx. 207 kg

Year of construction: 2013, condition: ready for operation (used), A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible. Iaedpov Rfrbsfx Ab Tjp

Condition: ready for operation (used), Year of construction: 2022, Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new. Iaodpfx Aborwzruj Tjp

Condition: used, Föhrenbach Laser Welding System Furthermore, I would like to inform you that the laser has been stored for shipping in 2 wooden crates. Data sheets are available as PDF files. Complete data package (4 folders). Iaodsxbcwxopfx Ab Tjp As previously mentioned, since this is a "custom machine," there are no off-the-shelf solutions here.

Condition: new, The Laser Cube X is a compact and versatile laser robot cell designed for precise welding, cutting, and structuring processes. Equipped with a state-of-the-art laser source, high-performance robotics, and a secure safety enclosure, the cell is ideal for automated mass and small-batch production. Its modular design, high process stability, and short setup times enable efficient integration into existing production environments. Iaodpfsyhzrtjx Ab Top

Condition: new, Year of construction: 2025, Equipment: CE marking, Welding, cutting and cleaning fiber laser machine Iaodpfx Absw Srtfs Tep

Condition: refurbished (used), Condition: refurbished, since then unused and professionally stored in case of the manufacturer Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm up to 4 kW mappings: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber connector: Trumpf B or type D (LLK Auto) Laser: CW laser up to 4 kW working range height (Z): ± 5 mm Robot adaptation: any Repaired/exchanged - Lens - pressure spring - protection spring - cover - Beam diaphragm - Wave spring - Fiber coupling weft The unit was also cleaned, adjusted and force-normalized. Iaedpfxsg Sfdlo Ab Tsp

Condition: used, Year of construction: 2011, A well-preserved EMAG laser welding machine with EMAG ultrasonic testing system including Laser Rofin type: DC 060 built in 2009 Without exhaust unit The machine used to weld gears with coupling rings. Diameter 60-80 mm. Weld depth 4-6 mm. Iaodoixxqkjpfx Ab Top *

Condition: like new (used), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Optics Wavelength Range (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W @ 9400 nm / 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Ijdpfx Aexp Iw Heb Teap Number of Installed Tunings: 1 Typical Tuning: Fast-Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale): 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Maximum Position Resolution: 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min warmup): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital controller card Control Interface (alternatives): digital SL2-100 Advanced Diagnostics: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing, with varioSCAN): (433 x 268 x 266) mm³ Beam Offset: 72.72 mm Other Features Water Cooling: Yes Air Cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (upon arrangement) or local pickup possible. Feel free to contact us by phone for further questions.