Used Wet Grinders for sale (2,028)

Condition: ready for operation (used), Year of construction: 1990, functionality: not functional, Michael Deckel S 11 tool grinding machine. The machine is operational and in good condition. Accessories: grinding wheel arbors, collets, operating manuals. Gedpfxoyhxccs Afnobh

Condition: used, Coffee grinder Manufacturer: Schärf MAZZER Model: xmill-Protect Precision grinder with conical solid grinding discs Slow rotation for optimal grinding quality Robust stainless steel housing Power supply: 220 – 230 V / 50 Hz / 900 W Gbjdpfoxzp Scsx Afnoh (Operation via standard household power) Safety certifications: GS and CE Weight: 25 kg Dimensions (W/H/D) approx.: 285 x 820 x 400 mm Ideal for professional use in the catering and hospitality sector.

Condition: used, STÖCKEL FNX 640 ST-2 is a NC Surface grinder, engineered for precision, high accuracy and reliability. Capacities: grinding length 600 mm, grinding width 400 mm, grinding height over table 530 mm; table speeds up to 35 m/min. Main technical specifications: grinding spindle motor 7.5 kW; voltage 50 Hz 3x 400 V; machine weight approx. 3600 kg; overall dimensions L 3000 × W 2500 × H 2300 mm. Delivers tight tolerances and is suited to applications in automotive, aerospace, machine tools, medical and watchmaking. Gsdpfx Afjychhaensbh

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Gsdpfxexgtgzj Afnebh Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A Gsdpfxsv Srgue Afnsbh • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Condition: used, total width: 660 mm, total length: 2,900 mm, total height: 1,400 mm, Empty weight: 2.500 kg Gjdpfsx U Duujx Afnsbh - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 2500 - Magnet width [mm]: 2050 - Magnet depth [mm]: 200 - Options: Tiltable magnet, Knife Sharpener - Transport dimensions: 2900mm x 665mm x 1400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2010, condition: excellent (used), MADO meat grinder with cooling Model - MEW 714 Year of manufacture - 2010. Perforated discs there is with the machine - 3 set of 3mm.. 3,5A. 50hz. 400V, 3ph. 1,5kW. Have 2 MADO MEW 714 in stock of this model. Gjdpfx Afjmkgp Honsbh DAB.2864.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 Gsdeya Az Nspfx Afnobh x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: used, Seydelmann Grinder -Type: AE130 -Power: 14/18 kW -Throat diameter: 130 mm -Dimensions: 1220 x 1050 x 1300 mm -Two-speeds for the working screw -Two-speeds for the feeder screw -Hopper capacity: 130 L -Weight: 800 kg Gbsdpfx Aoyip Etofnsh -Set of knives and sieves -Made of stainless steel -Condition: used in very good condition, overhauled, ready to work

Condition: used, Year of construction: 1975, 1640 weight 280 kg ja +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Gbodpfsh H Eqnex Afnsh +++++

Condition: like new (used), Year of construction: 2022, operating hours: 1,034 h, functionality: fully functional, machine/vehicle number: 26128, Okamoto OGM 250 UNC III Machine Characteristics: - OKAMOTO touch-screen NC controller with advanced OKAMOTO software - 2-axis interpolation - Step (shoulder) automatic probe for setting starting reference and face grinding - Automatic wheel dressing with automatic compensation - Up to 21 programs can be stored - 6 types of grinding cycles, up to 10 steps each - 5 types of wheel dressing cycles - Zero point measuring device and air gap measuring device (optional) - Extremely rigid, stress-relieved cast iron bed construction - Double V-type prismatic slideways, only OKAMOTO machines are manufactured this way (with unique hand-scraped surfaces) Technical Data: Capacity - Max. swing diameter over table: Ø 220 mm - Distance between centers: 500 mm - Max. grindable diameter: Ø 200 mm - Max. workpiece weight between centers: 50 kg - Max. workpiece weight in chuck, gross: 20 kg - Grinding wheel size for universal grinder: Ø305 mm x 50 mm x Ø127 mm - Max. peripheral speed (with inverter): 45 m/sec - Wheel spindle X-travel: 215 mm - Universal swiveling range: +/- 30° - Diameter resolution: 0.0001 mm - Rapid traverse in diameter: 4 m/min - Table Z-travel: 762 mm - Swivel angle: 0° ~ -9° - Resolution: 0.0001 mm - Rapid traverse: 8 m/min - Workhead type: fixed and rotating centers, taper MK3 - Workhead bore diameter: Ø18 mm, speed 10 – 500 rpm - Swivel angle - universal: 30°/ -90° - Tailstock sleeve stroke: 20 mm, sleeve taper MK3 - Motors: Wheel spindle 3.7 kW, workhead AC servo 1.8 kW, table feed AC servo 1.2 kW, wheel feed AC servo 1.2 kW - Total power requirement: 15 kVA Gbodpfex R Tw Rjx Afnsh - Machine dimensions: length 3,400 mm, width 2,330 mm, height 1,950 mm - Net weight: 3,300 kg Standard grinding and wheel dressing software features: - 10-step automatic grinding cycle - Straight wheel dressing cycle - Plunge oscillation grinding cycle - Offset plunge (roughing) + cross-feed finishing grinding cycle - Shoulder wheel dressing cycle for both left and right sides - Profile wheel dressing cycle, programmable in ISO G-code - Grinding cycle for workpiece shoulders, left and right sides Standard Accessories: - Grinding wheel Ø305x50xØ127 mm (UNC III), 1 pc - 2 wheel arbors - 3.7 kW spindle motor - Max. grinding wheel peripheral speed: 45 m/sec - Speed controller for workhead spindle - FANUC 0i D CNC control (simultaneous 2-axis) - 10.4" color OKAMOTO controller – vertical and cross-feed display - Graphical teach software for creating grinding and dressing cycles - Complete Fanuc push-button panel for ISO G-code programs with corner radius compensation - Electronic handwheel (graduations: x1/x10/x100) - Rapid traverse control lever (joystick) for cross and longitudinal directions - Enclosed guard with safety interlocked sliding door - LED machine lamp - Automatic lubrication during operation - Coolant nozzles and piping - Coolant system for wheel dressing - Permanent coolant installation to the table - Carbide centers - Step (shoulder) positioning device and software - Gap sensor and software - Leveling screws and base plates - Tool kit - Operating manual - CE version - Table rotation measuring device - Coolant system with paper filter, DGS, 200 l - Rinsing gun - 2-point manual steady rest - 130 mm manual chuck with backplate - Motorized tailstock sleeve with foot pedal - Status lamp (green/yellow/red) - Balancing arbor - Spare wheel arbor

Condition: excellent (used), Profile grinder Weinig model Rondamat 929 Gjdpjydd Ncjfx Afnobh

Condition: excellent (used), Carbide saw grinder for top & face VOLLMER model CE21H Gbodpfeydd D Hox Afneh

Condition: excellent (used), Knife grinder MVM model KS with tilting magnet mm 1500 long Gbedpfox Hp Svsx Afnoh

Condition: excellent (used), Catalogue number 7733 TECHNICAL DATA - Belt width: 150mm - Oscillation - Vertical oscillation movement - 2 rotation speeds - Work table: 1180x370mm - Work table adjustment: up/down, front/back and at an angle - Motor: 3kW - Platen - for precise grinding - With fan - Effective sanding length on belt: 700mm - Top/bottom milling cutters for edge chamfering Godpfxeya Hm Nj Afnebh - Extraction port diameter: 70mm - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – with oscillation – with platen – with fan – includes milling cutters for edge processing/chamfering – for both curvilinear and straight sanding – unpainted – used machine, in very good condition Net price: 7500 PLN Net price: 1780 EUR (based on exchange rate 4.2 EUR) (Prices may vary with greater rate fluctuations)

Condition: new, Year of construction: 2026, OSTERBERGER KSBP 2500 Universal Brand new combined universal long-belt sander - brushing machine - polishing machine in portal construction. Sanding length and width can be customized according to customer requirements, also available with two sanding belts in parallel for two workstations, allowing for pre-sanding and finishing without changing the belt, as well as a brush and polishing head with automatic longitudinal adjustment to the left and right. The machine is suitable for coarse and fine sanding, structuring (brushing), polishing, and high-gloss polishing of a wide variety of surfaces including painted workpieces, natural workpieces, and various metal sheets made of stainless steel, aluminum, brass, copper, bronze, and various plastics. Combined long-belt sanding machine with brushing and polishing unit for workpieces up to 650 mm in height: Gbedpfjyhzkpex Afnsh - Motorized movement of the brushing and polishing unit from left to right and back - Manual movement of the support table forwards and backwards - Motorized adjustment of the support table up and down Worktable size: 2,500 x 1,000 mm (other sizes available upon request) Sanding belt dimensions: 8,200 mm x 150 mm Drive power of brushing and polishing unit: 3 kW Drive power of sanding belt unit: 3 kW Dimensions approx. 4,200 x 1,600 x H 2,100 mm Weight approx. 1,000 kg

Condition: excellent (used), Jung JF 625 surface grinder in very good condition. The machine enables precise surface machining. Sturdy construction and reliable operation. Ideal for workshops of all sizes. Safe loading on our side. Short video showing the machine in operation: ?si=JufmHYi6Q27ELJXR Gsdpfxeya Izzs Afnjbh Technical data: Grinding width: 250 mm Grinding length: 600 mm Magnetic table: 250x600 mm Max. table to spindle height: 500 mm Grinding wheel size: 300x30x76.2 mm Machine weight: 2500 kg

Condition: used, Year of construction: 2000, functionality: fully functional, The machine is still in operation and fully functional. Available programs: Cylindrical cutters with profiling Slab milling cutters Disc milling cutters Gbsdpeyc Hf Dsfx Afnsh Conical cutters Die milling cutters Drills Step drills

Condition: used, Year of construction: 2012, functionality: fully functional, The machine is in good condition and is equipped with a loader and a disc changer. Gjdpfx Afox Swyfsnsbh

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Godsyaq Taspfx Afnobh TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 23146001, The machine was acquired in 2024 and has seen very little use. The original price was €132,000 net. The technical data is sourced from the manufacturer's website. The seller cannot guarantee its accuracy. TECHNICAL DETAILS Capacity up to: 150 m³/h Gbsdpfx Afoyg D Svenjh Chipping disc: 1,450 mm (diameter) x 78 mm Disc speed: 700 rpm Number of cutting blades: 4 Number of counter blades: 4 Maximum chip length: 36 mm Feed speed: 0.7 m/s MACHINE DETAILS Control system: Greentec Control System 3.0 with touchscreen Three-point hitch: Standard Starting aid: Hydraulic Drive: PTO shaft 1000/1000E Required power: 200 – 450 HP Weight: 3,100 kg Speed: 1000 rpm Note: This machine is a special version without a hopper.

Condition: excellent (used), functionality: fully functional, center height: 160 mm, workpiece weight (max.): 250 kg, grinding length: 1,500 mm, grinding wheel diameter: 203 mm, total width: 23,500 mm, total length: 62,500 mm, total height: 17,000 mm, grinding diameter: 320 mm, spindle speed (max.): 1,470 rpm, table speed: 5 mm/min, overall weight: 5,900 kg, year of last overhaul: 2016, power: 7.5 kW (10.20 HP), BHU 320 x 1500 roller grinder. Prod. by TOS Hostivar Czech Republic - Major overhaul 2016. Grinding diameter 320 mm Grinding length 1500 mm Center height 160 mm Dimensions of the grinding wheel 500 x 80 x 203 mm Speed of the grinding spindle 1470 rpm. Grinding spindle - quick adjustment 60 mm Table speed - return 0.005 - 0.05 mm Automatic feed 0.1 - 5 mm/min Workpiece weight max. 250 kg Grinding head rotatable +/- 45° Gjdpfx Aotzwy Iefnobh Taper in tailstock MK 5 Workpiece advancement rotatable 90 degrees Grinding spindle drive 7.5 kW Weight of the machine 5900 kg Overall dimensions (L X W X H) 6250 x 2350 x 1700 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 595 h, WWB200 SuperGrinder. Perfect machine for kebab factories, sausage and burger producers etc. Has run for 595 hours only. Gbjdpfx Aowhagtsfneh

Condition: like new (used), Year of construction: 2022, functionality: fully functional, ITALMEC TBNS/9 Wet Drawing Line 2022 - 25 m/s, Copper Bath, Near-New, Slippage-Free Description: ITALMEC TBNS/9 WET DRAWING LINE - High-performance wire drawing machine for copper and alloy. This premium unit is offered as part of a two-line package sale. Year of Manufacture: 2022. Commissioned: 2023. Condition: Near-New (Only 20 tons of test operation completed). Detailed Technical Specifications: Gbedpfx Ajxm Tq Hsfneh ● Machine Type: Multiple Wire Drawing Machine (Wet). ● Technology: New Generation Slippage-Free (Independent motor on each capstan). ● Max. Operating Speed: Up to 25 meters/second (m/s). ● Max. Inlet Wire Diameter: 3.5 mm (specific to wet drawing). ● Drawing Process: Designed for high cross-sectional reduction. ● Control System: AC Siemens Electrical Cabinet and integrated drives. ● Unique Feature: Factory-integrated COOPER BATH (Miedziująca Wanna) included. Commercial & Logistics Information: ● Original Purchase Value (This Unit): 160 000 EUR. ● Ancillaries: Complete Line Wiring (approx. 50 000 PLN value) is included in the package price. ● Current Status: Professionally Disassembled and secured, ready for immediate loading (EXW). ● Price: This line is sold as part of a two-line package (TBNS/9 + TBNS/9 Standard). Total package price: 259 000 EUR EXW. Inquiries for a single machine purchase are welcome. This is a rare chance to acquire a 2022-technology wire drawing machine with minimal hours, guaranteeing cutting-edge performance.

Condition: excellent (used), Year of construction: 2007, 5 controlled axes: X, Y, Z, A, and B Fully automatic grinding wheel changer NUM Axium Power 1050 control system with PC TOOL DATA Max. diameter: Ø 250 mm Max. diameter for complete machining: Ø 250 mm Max. length for complete machining (from front edge of workpiece support): 430 mm Max. tool length between centers: 480 mm Center height: 195 mm X-axis grinding travel: 625 mm Z-axis cross slide travel: 305 mm Y-axis vertical slide travel: 305 mm All linear axes are driven by high-precision ball screw spindles with 2 preloaded nuts. The axes are guided on extremely robust recirculating roller shoes on hardened rails. GRINDING HEAD, B AXIS Swiveling range in the horizontal plane: 240° Rotational speed: 120°/s Liquid-cooled motor spindle: 150 x 150 mm Grinding wheel mount with automatic quick-clamping system HSK - C/E 50 Spindle speed infinitely variable: 2,000 - 10,000 rpm Max. grinding wheel diameter: 150 mm Gbodpfoxt N Izsx Afnoh Grinding wheel changer with 4 magazine slots Second probe arranged on the workpiece holder for automatic grinding wheel measurement, including software CHAIN LOADING MAGAZINE with PICK-UP arm Capacity: 160 tools Maximum workpiece diameter: 32 mm Maximum workpiece length: 200 mm Maximum tool weight: 2.5 kg CNC-controlled steady rest TURBO separator (filter system)