Used Windows Center for sale (22,428)

Condition: used, Year of construction: 2005, revolutions per minute 8000 U/min x-travel 1000 mm Chjdpfeud Al Hox Ah Ued y-travel 500 mm z-travel 570 mm Control Siemens weight of the machine ca. 5000 KG

Condition: used, Year of construction: 2004, x-travel 1.500 mm y-travel 700 mm z-travel 700 mm control FAGOR 8055 MC table-size 1.725 x 650 mm table weight 1.000 Kg T-slots 6 x 18 x 100 mm rapid traverse 30.000 mm/min distance spindle /table 190-890 mm taper iso 40 DIN 69871 number of spindle speeds 10.000 U/min/rpm Spindle power 25/34 kW total power requirement 57 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,683 x 3,750 x 3,335 m -Working acceleration 3 m/s² -Distance from axle to column 690 mm. -Min.-Max. Distance from the center of the table to the column 340-1,040 mm. -Automatic tool changer: -Type of tool change Random bidirectional -Positions in magazine 24 Chedpfx Ahoxtfzdj Uod -Maximum diameter with adjacent/free positions 77/130 mm. -Maximum tool length 300 mm. -Maximum weight of 1 tool / total weight 7 / 120 kg -Tool change 2 s.

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Cedpsxrahcjfx Ah Ujhd Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 370 mm, table width: 320 mm, table length: 320 mm, table load: 300 kg, rotational speed (min.): 80 rpm, rotational speed (max.): 80 rpm, overall weight: 9,000 kg, spindle speed (min.): 15,000 rpm, spindle speed (max.): 15,000 rpm, spindle motor power: 31 W, spindle nose: HSK 63A, tool length: 250 mm, tool diameter: 125 mm, tool weight: 8 g, control type: CNC control, Equipment: chip conveyor, Hermle C22U 5 Axis Machining Centre Siemens 840D Control 5 Axis Simultaneous XYZ: 450 x 600 x 330mm 320mm diameter table Maximum workpiece diameter 320mm maximum workpiece height 265mm Maximum table load 300Kg A axis -/+ 135 degrees spindle speed 15,000rpm 55 station tool changer Swarf Conveyor Coolant Codpfx Ajxpil Soh Uohd Tool Setter Spindle Probe

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1064590, SPECIFICATION Travel X axis stroke 1270mm Y axis stroke 508mm Z axis stroke 635mm Distance spindle nose to table 102-737mm Table Width 457mm Length 1321mm Max. Weight on table 1588kg T Slots : width 16mm : pitch 80mm   SPECIFICATION Cont’d Spindle Taper size No.40 Speed 0-7500rpm Bearings Bearing lubrication Air/oil injection Cooling Liquid cooled Motor Spindle motor, max. rating 14.9kW Feedrate Rapid X, Y & Z axis 18m/min Max. Cutting feedrate 12.7m/min Toolchanger Capacity 20 tools Cjdpfx Aowy Uy Ejh Uehd Type BT40 General Approximate machine weight 6033kg Air supply (min) 113lpm, 6.9 bar MACHINE EQUIPPED WITH: - Haas (Fanuc compatible) CNC Control system Programmable coolant nozzle Automatic lubrication system Enclosed guarding Swarf auger Lighting

Condition: excellent (used), operating hours: 4,019 h, functionality: fully functional, For sale is a machining center from DECKEL MAHO model DMC 63 V. The machine is fully functional and can be inspected by appointment by telephone. Chedpfx Aerrf Eaoh Ujd

Condition: used, Year of construction: 1980, centre height 180 mm centre distance 1250 mm 360 mm spindle bore 41 mm spindle turning speed range 11-2800 U/min Chodpfsub Uxmsx Ah Uod weight of the machine ca. 1900 kg

Condition: ready for operation (used), Year of construction: 2005, x-travel 400 mm y-travel 450 mm z-travel 350 mm Control Heidenhein iTNC 530 68 fach tool adaptor HSK 40E turning speeds 30.000 U/min fixed table - dimensions 300 x 400 mm mm workpiece weight 200 kg pallet table size 320 x 320 mm feed speeds autom. x/y/z 40 m/min. spindle drive motor 13 kW Codpfx Aexfb E Ajh Uohd Number of working hours 32369 h total power requirement 16 kW weight of the machine ca. 7.500 kg High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic power unit for tool and pallet clamping, and digital drives with liquid-cooled Siemens AC servo motors. Accessories: 1 BURN refrigeration unit, 1 Keller L-Cut extraction system (built in 2012), PS 32 setup button, and tool blow-off device. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 2000, functionality: fully functional, The used BIGLIA B 501 YS CNC lathe with live tooling and sub-spindle is a fast, compact-medium size inclined bed CNC lathe, featuring an ASA 6" main spindle with "C" axis, FANUC 18i-T CNC controller with color LCD, year of manufacture 2000, compliant with CE standards. It is equipped with a sub-spindle (also with "C" axis), 12-station electrically driven turret with Y axis, dual chuck, tool presetting, and bar feeder interface. ASA 6" spindle size Main spindle chuck diameter: 210mm Main spindle bar capacity: 52mm Sub-spindle bar capacity (ASA 5"): 52mm Sub-spindle chuck diameter: 160mm Chsdpfx Ahexf I I Re Ued Main spindle max. power: 26 kW Spindle speed: 4,000 rpm (both spindles) Maximum distance between spindles: approx. 50,000mm Y-axis travel: 120mm (+/-60mm) Live tooling power: 3.7 kW Machine weight: 5,300 kg The scope of supply is completed by a set of fixed tool holders, a set of live tool holders (as shown in photos), and a belt-type chip conveyor.

Condition: used, Year of construction: 2011, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, controller manufacturer: 3D MILLPLUS IT V600, CONTROLS .. CNC controls. 3D MILLPLUS IT V600 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 500 mm .. Y-axis travel: 450 mm .. Z-axis travel: 400 mm TABLE .. table surface (left-right): 700 mm .. table surface (front-back): 500 mm Csdpfxoxr T U Ne Ah Ujhd .. workpiece load (max): 500 kg SPINDLE / HEAD .. spindle revolutions (min): 20 /min .. spindle revolutions (max): 10000 /min .. tool fixture: ISO SK 40 .. drive power: 13 kW AXIS DRIVES .. traverse velocity X (max): 24000 mm/min .. traverse velocity Y (max): 24000 mm/min .. traverse velocity Z (max): 24000 mm/min TOOL MAGAZINE .. number of positions: 30 .. tool diameter max.: 80 mm .. - with free neighbour positions: 130 mm .. tool length max.: 300 mm .. tool weight max.: 6 kg .. tool changing time: 8 s ATTACHMENTS .. European CE standards: yes No cooling system; the machine is connected to a central cooling system. 17,153 operating hours, 2,940 spindle hours

Condition: excellent (used), Year of construction: 1999, operating hours: 6,000 h, functionality: fully functional, travel distance X-axis: 505 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, controller manufacturer: Heidenhain, controller model: TNC 426, workpiece weight (max.): 300 kg, table width: 380 mm, table height: 1,004 mm, table length: 920 mm, overall weight: 250 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 10 W, Equipment: documentation/manual, rotational speed infinitely variable, The machine is equipped as follows: -Tool holder: SK 30 Codpsv A Tyqjfx Ah Uehd -Tool changer with 24 places (automatic tool change) -Coolant system -Spindle cooling -Mist extraction -Chip drawer -RENiSHAW measuring probe

Condition: used, Year of construction: 2001, functionality: fully functional, Machining center - horizontal MAKINO A55 Year of manufacture 2001 Control Fanuc 16 MC Professional 3 Technical details x-travel 560 mm y-travel 560 mm z-travel 560 mm Spindle speeds 20,000 rpm Torque max. 167 Nm Tool holder HSK-A63 DIN 69893 Tool magazine: 126 places Distance spindle head - table min./max. 150 - 710 mm Pallet size 400 x 400 mm Rotary table 1 ° Distance table-lower spindle 80-640 mm Cjdpfx Aexr Dyijh Ujhd Table speed 5000 min-1 Pallet load 400 kg Drive 22 kW Feed 1-40,000 mm/min Rapid traverse 40,000 mm/min Tool change time 1 sec Max. tool diameter 80 mm Max. tool length 300 mm Pallet change time 7 sec Total power requirement 64 kW Machine weight approx. 15 t Space requirement approx. 9x3x2.8 m

Condition: used, Year of construction: 1966, . centre distance 3000 mm Cjdpfxeh Uytqj Ah Ushd max. swing diameter 660 mm multifix . steady 2 Stück weight of the machine ca. 5 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: Mori Seiki MSX 501III (FANUC) Travel (mm): X: 800 Y: 510 Z: 460 B: - Table dimensions (mm): 1,320 x 600 Table load capacity (kg): 1,000 Cutting feedrate (mm/min X,Y,Z): 1 – 20,000 Rapid traverse max. (m/min X,Y,Z): 30, 30, 24 Main spindle speed (rpm): 20,000 Spindle power (kW): 18.50 Taper type: BT-40 Torque (Nm): - Tool magazine type: RANDOM Tool magazine capacity (positions): 30 Max. tool diameter (mm): 76 Max. tool diameter with adjacent positions empty (mm): 127 Max. tool length (mm): 250 Max. tool weight (kg): 7 Coolant tank capacity (l): 200 Csdpfx Ahoxqxzrs Ujhd Through spindle coolant (bar): Yes EQUIPMENT Chip conveyor: Included High-pressure coolant through spindle: Included Tool breakage control probe: Included NIKKEN 4th axis: Included MACHINE DIMENSIONS Length (mm): 4,308 Width (mm): 4,068 Height (mm): 2,940 Weight (kg): 7,200

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Codolrqiqopfx Ah Uohd Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Codsxrcnlepfx Ah Uohd

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, Technical Equipment / Features Working area: Clamping surface table 1: 850 x 1,500 mm Clamping surface table 2: 850 x 1,200 mm Max. table load: 1,000 kg Height-adjustable tables: 3 x 65 mm Travel distances: X-axis (longitudinal): 3,000 mm Y-axis (transverse): 800 mm Z-axis (vertical): 600 mm Feeds: X, Y, and Z axes, stepless: 5–32,000 mm/min Max. feed force X and Y axes: 10,000 N Max. feed force Z axis: 16,000 N Rapid traverse X/Y/Z: 32 m/min Working spindle: AC main drive, water-cooled Power S6-60% duty cycle: 26 kW Gear stages: 2 Stepless speed: 30–6,000 rpm Max. torque at 40% duty cycle: 650 Nm Tool holder: SK 50 – DIN 69871, Form A Spindle diameter in front bearing: 90 mm Max. drilling diameter: 100 mm Max. rigid tapping: M 40 Max. milling capacity: 600 cm³/min Tool changer: Traveling tool magazine on the gantry column Tool positions in traveling magazine: 52 Additional tool magazine: 83 positions Tool change time to spindle: approx. 5 s Chip-to-chip time: approx. 9 s Max. tool diameter: 180 / 120 mm Bridge tools: max. 250 x 180 mm Max. tool length: 400 mm Max. tool weight: 15 kg Tool swivel system for delivering tools from the magazine in a horizontal position for automatic use in angle, drilling, and milling heads CNC control: SIEMENS SINUMERIK 840 D Combined with digital drive control, hard disk storage, 15" TFT color monitor 1 GByte hard disk, external machine operator panel, full QWERTY keyboard Standard drilling and milling cycles Rigid tapping without compensating chuck Linear and circular interpolation Plane swivel, helical machining etc. Siemens tool management for tools and magazine Program input during machining Spindle power display Electronic handwheel USB interface UNISIGN diagnostic system Chip conveyor: Installed longitudinally under the table Ejection to the right Discharge height approx. 1,200 mm Integrated coolant tank with lifting pump Angle drilling and milling head: Angle drilling and milling head, automatic changeover via pick-up station Automatic positioning: 72 x 5° Stepless speed: 30–4,000 rpm Max. torque at 40% duty cycle: 650 Nm Chjdpfxsxrf Smo Ah Ued Power at 40% duty cycle: 26 kW Dimensions / Weight: Footprint without control cabinet: approx. 8.0 x 4.5 m Machine height: approx. 4.5 m Machine weight: approx. 20,000 kg Equipment: Full enclosure Wireless measuring probe, manufacturer M&H Angle milling head incl. pick-up station Coolant system with 2 cooling circuits and internal cooling through the spindle Chip conveyor Cooling unit for the spindle Various SK 50 tool holders

Condition: used, Year of construction: 2001, functionality: fully functional, Machining center - horizontal MAKINO A55 Year of manufacture 2001 Control Fanuc 16 MC Professional 3 Technical details x-travel 560 mm y-travel 560 mm z-travel 560 mm Spindle speeds 20,000 rpm Chsdpjxr Dtiofx Ah Usd Torque max. 167 Nm Tool holder HSK-A63 DIN 69893 Tool magazine: 126 places Distance spindle head - table min./max. 150 - 710 mm Pallet size 400 x 400 mm Rotary table 1 ° Distance table-lower spindle 80-640 mm Table speed 5000 min-1 Pallet load 400 kg Drive 22 kW Feed 1-40,000 mm/min Rapid traverse 40,000 mm/min Tool change time 1 sec Max. tool diameter 80 mm Max. tool length 300 mm Pallet change time 7 sec Total power requirement 64 kW Machine weight approx. 15 t Space requirement approx. 9x3x2.8 m

Year of construction: 2000, condition: used, Aufnahmen Divers K50 Diameter 50 mm +++++ Please note: Cjdpfeg T Ap Ajx Ah Ushd The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), Year of construction: 2007, HYUNDAI WIA KH63G - YOM 2008/ FIRST INSTALLED 2010 - SERIAL NUMBER G3641-071 MACHINE CONSTRUCTION & FEATURES • Twin Pallet Horizontal Machining Centre. • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Oil Cooled 2 Stepped Geared High Torque Spindle. • Shuttle Type Pallet Changer. • Pre-Tensioned Double Anchored Ballscrews. TABLE Table Size 630 X 630 MM Maximum Load Capacity 1,000 KGS Maximum Working Size Ø 1,120 X H 875 MM Minimum Index Angle 1° Csdpju A Td Tofx Ah Ujhd FEED X-Axis 950 MM Y-Axis 825 MM Z-Axis 760 MM Distance from Table Surface to Spindle Centre 175 ~ 935 MM Distance from Table Centre to Spindle Nose 0 ~825 MM Guide Type HARDENED & GROUND BOX GUIDEWAYS SPINDLE Spindle Taper #50,DIN 69871 Spindle rpm 4,500 RPM Spindle Motor Output (Max/Cont.) 26.0 / 22.0 KW Spindle Torque (Max/Cont.) 1,267 / 1,071 NM Type 2 STEPPED GEAR FEED RATE Cutting Feed Rate X, Y and Z-Axis 5 M / MIN Rapid Feed Rate X, Y and Z-Axis 20 M / MIN ATC Number of Tools 60 Tool Type ISO 50, DIN69871 Maximum Tool Diameter Ø 110 MM Max. Tool Diameter without Adjacent Tools Ø 245 MM Maximum Tool Length 600 MM Maximum Tool Weight 20 KGS Tool Selection Method FIXED ADDRESS Tool Change Time – Tool to Tool 6 SEC Tool Change Time – Chip to Chip 11 SEC APC Number of Pallets 2 APC Type SHUTTLE TANK CAPACITY Coolant Tank 400 L POWER SUPPLY Electric Power Supply 36 KVA Voltage 415 V / 50 HZ / 3PH MACHINE Floor Space (L x W) 3,530 X 5,320 MM Height 3,106 MM Weight 14,000 KGS STANDARD SUPPLIED MACHINE FEATURES • Total Splash Guard • Door Interlock • APC (2 Pallets) • Remote MPG • Coolant Tank • Internal Chip Conveyor (2 Sets) • Work Light • Tapped Holes in Pallets • Levelling Pads and Bolts • Operation/Programming Manuals • Call Light • Selection of Spindle Tooling

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC Turning and Milling Center SPINNER Model: TC110 MCY Manufacturer: SPINNER Werkzeugmaschinenfabrik GmbH Year of manufacture: 2007 Cjdpfx Ahjxrf Alo Ushd Machining type: Turning of medium and large batch parts Control system: CNC control Sinumerik 840D sl Programming: Shopfloor programming, software package "Turning with ShopTurn" 840D sl options: "Residual material detection and processing", "3D simulation of the finished part" Drive power: 35 kW Chuck: D = 250 mm, d = 110 mm Maximum workpiece size: L = 1,000 mm, D = approx. 300 mm Tool magazine: 12 tool stations Axes/spindles: Main and counter spindle, C-axis, Y-axis Special feature: Y-axis for drilling and milling operations, tailstock and steady rest Live tooling: available Electrical connection: U = 3/PE ~ 400 V Frequency: 50 / 60 Hz Current consumption I_B = 63 A Current consumption I_N = 80 A

Condition: used, Year of construction: 2002, functionality: fully functional, Horizontal machining center MATSUURA H-Plus - 405 PC2 Year of construction 2002 CNC control FANUC 16i Technical data: X-axis travel 660 mm Chjdpfx Ahjxr Dp Dj Uod Y-axis travel 660 mm Z-axis travel 660 mm Rapid traverse X-axis 50,000 mm/min Rapid traverse Y-axis 50,000 mm/min Rapid traverse Z-axis 50,000 mm/min Spindle: Speed:12,000 rpm Power:22 kW Torque:187 Nm Tool holder:BT40 NC rotary table: B-axis:0,001 Pallet size:500 x 500 mm Table load (max.):400 kg Workpiece size (max.):ø700 x 850 mm Dimensions Total height 2,530 mm Total length 6,740 mm Total width 3,340 mm Machine weight : 7500 kg

Condition: used, Year of construction: 2000, . max. swing diameter 460 mm hollow 66 mm Chsdpfx Ahswhqzus Ued digital . multifix . centre distance 1000 mm feed: . weight of the machine ca. 1,8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Cedpfx Aoq Nmm Tjh Ujhd Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: used, Year of construction: 1996, coolant ja Axis 3 9041 x-travel 800 mm Cedsud Trwspfx Ah Ushd y-travel 550 mm z-travel 500 mm